Tender For Redevolapment Of Panchayat Samiti South Solapur @ Solapur, Tal. South Solapur.Dist. Solapu
Tender Value
10.54 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
6 days left
EMD
10620
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solapur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Redevolapment Of Panchayat Samiti South Solapur @ Solapur, Tal. South Solapur.Dist. Solapu
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 2 | Providing and laying telephone blck/amba white/catbary brown/RBI Red/ Ocean brown granite stone of 18 to 20mm thick for dado frame/dado/ window boxing etc. on cm 1:6 including filling joint with polymer base filler noissing the sharp edges wherever necessary curing etc. complete. |
| 3 | Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC 'C' channel made from 5 mm (+/0.25) thick prelaminated sheet of density 600 kg/cbm ,of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either side forming stiles ; and 5 mm thick ,95 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered in 45 on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm width is to be stuck on the bottom side of the ' c ' channel prelaminated paneling of 5 mm (+/0.25) thick PVC sheet to be fitted inside the M.S. frame welded/ sealed to the styles and rails with 5 mm (+/0.25) x 30 mm PVC sheet beading on either side and joined together with solvent cement adhesive etc ,10 mm thickness (5 mm (+/0.25) x 2 nos ) 20 mm wide cross PVC sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3 nos M.S.powder coated but |
| 4 | Providing and fixing fiber glassed rainforced polyster door shutter (reframed 2006) without ventilkator including cromium llated fixture and fastening with cromium plated handle on both side etc. complete.A)30MM THICK. |
| 5 | Providing half round moulding(Full Moulding) to 18mm to 20mm granite stones including fine polishing and cleaing etc. complete. |
| 6 | Providing and applying Washable oil bond distemper of approved colour and shade including scaffolding and prepairing the surface etc. complete. |
| 7 | Providing and fixing 18mm ply prtition with glass including mica on both side,Mlmimne polish frmes, teak wood frame also including glss, fevicol, nails screws and teak wood batten of 50*25mm etc. complete. |
| 8 | Providing and fixing mild steel grill work for windows, ventilators, etc. 15 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. |
| 9 | Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983). |
| 10 | Providing and Fixing 90cm*60cm Granite Plate Engraving 10cm Hight letter, including paintting and Leterring figures with approved colour and shade complete. |
| 11 | Excavation for foundation in earth, soil of all types, sand, graval and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreding as directed, dewatering, preparing the bed for the foundation and necessary back filling, remming, watering including shoring and strutting etc. complete. ( LIFT UP TO 1.5 M.) |
| 12 | Excavation for foundation in Hard Murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreding as directed, dewatering, preparing the bed for the foundation and necessary back filling, remming, watering including shoring and strutting etc. complete. ( LIFT UP TO 1.5 M.) |
| 13 | Providing dry/trap/ granite/qurtzite rubble stone soling 15 to 23cm thic including hand packing and compacting etc. complete. |
| 14 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 15 | Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC withSCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer)etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 16 | Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pils caps, footings, foundations, slabs, beams, columns, canopies, staircase, neweis, chajjas , lintels, pardis, copings, fins, arches etc. as per detailed desings, drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. b) Tor Steel |
| 17 | Providing Ilnd class Burnt Brick masonary with conventional type bricks in CM 1:6 in Foundation and Plinth of inner walls in plinth , external walls in plinth , external walls including striking joints, racking out joints on expsoed faces and watering comp. |
| 18 | Providing internal cement plaster 12mm thick in single coat in CM 1:5 without neeru finish, to concrete, or brick srfaces in all positions including scafolding and curing etc. complete. |
| 19 | Providing erecting and giving test of submerssible pumpset to IS 8034 WITH WATER PROOF WINDING PUMP SHALL BE SUITABLE FOR VERIOUS DELEVERY HEAD AND DISCHARGE WITH STAINLESS STELL SHAFT.MOTOR SUTAIBLRE FOR working on 415v. = 10% 3ph. 50Hz. A.C. Supply with cable guard and other necessary material etc. complete. |
| 20 | Panel fabrication M.S. Sheet of thickness below to be used for fabrication of boxes panel boardetc. Including cutting bending drilling welding cleaning derusting and paintting with one coat of red led paint and two coat of enamle paint. Etc. |
| 21 | Supplying and erecting self locking areengment with duplicate keys duly erected duly flush with panel surface of cupboard. |
| 22 | Suppying and erectingfully Automatic star delta starter to operatesquiral cage induction motor working on 380-440Volt. 3phase 50Hz withno volt coil over load elementand ON OFF push button, withnecessary material and connectedto supply etc. complete. |
| 23 | Supplying and erecting flat flexible 3core 4sq.mm. PVC Sheathed submerssible type copper cablesuitable clamped at fixed intervlswithcoloum pipe aseembly.etc. complete. |
| 24 | Supplying and erecting marine plywood 19mm thick fixed to wall or on provided panel boardfor fixing Kitakat fuseand meter etc. with necessarymaterial. |
| 25 | Providing and fixing on walls/ceiling/floor 20mm dia. CPVC pipe with necessary fittings, remaking good the demolished portionetc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowk yoras directed etc. complete |
| 26 | Providing ISI Mark G.I.Pipe of following class and dia. Excluding GST LEVELD BY GOI & GOM in all respectInspection charges transportation tostore etc. completeOne coupler shall be provided with each full lengthof pipecost of which included in rate below. |
| 27 | Lowering and laying and jointting G.I. Pipe and special of folowing classand dia. Including conveying from store to site of workall labour etc.eighter underground or in verticle position. |
| 28 | Providing and fixing Elbow 90 Degree for 20mm Dia. Etc.complete |
| 29 | Providing and fixing ball cock for 25mm Dia.etc. complete. |
| 30 | Providing and fixing Road juction / information signf board of size 1.20 x 0.90 m prepared on 18 guage M.S sheet with angle iron frame of size 35 x 35x 3 mm with cross bracing 25 X 25 X 3 mm including painting with one coat of zinc cromate stoving primer and two coats each of green /white back ground and back side gray stove enakelled,bonded with red Retro reflective sheet Engineering grade,border / letters/ numerals and arrow and arrow. coated with non pealable crystal clear protective coat retaining 100% relection including two angle iron post of size 50 x 50x 5mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bands of 25 cm. with 4 nos .high strenghth G.I bolts and nuts of size 10 mm dia .and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying ,fixing in ground with cement 1:4:8 block of 60cm x 60 cm x 75 cm size as directed by Engineer -in- charge etc. complete. |
| 31 | Test of compressive srength of c.c. cube (set of 3 cubes) etc. |
| 32 | Add Royalty Charges OF Sand etc. complete |
| 33 | Royalty of Other Minarls etc. |
| 34 | Add GST charges etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender