Tender For P&F Work Of Led Lights With Phase Wire

Sharing tender

Tender for P&F Work Of Led Lights With Phase Wire , Providing & Fixing Of Ik08, Ip 66 Protected Led Street Light Luminaire On Existing Bracket/Pole. Fixture Made Of Powder Coated Single Piece Pressure Die Cast Aluminum Material With Heat Dissipation Fins On Housing With Uv Stabilized Pc (Uv Stablization Report Submitted For Uv Cover ) /Toughened Glass Cover And Secondary Lens On Each Led & Should Be Smd Type Of 3 To 5 Watt Each . The System Efficacy =125 Lm/ Wt And Potted Driver & Has A Unique Bis R Number With Input Voltage Ac 120 To 270 V Ac With High Voltage Cutoff @=300 V Ac And Auto Resetting Safety , Power Factor 0.95 Driver Efficiency 85% ,Thd(I) 10% Humidity 10% To 90% Rh Working Temp -5C To 45C . Driver Current 750Ma. The Luminaire Shall Be Bis Certified And Trade Mark Certified. Life Expectancy Equal Or More Than 50000 Burning Hrs With Minimum 70% Lumen Maintened , Cri 70 And Cct 5700K +355K. Surge Protection Shall Be Min ≥ 4 Kv Internal And Min 10 Kv External Inside Driver Compartment. Driver Should Be Phase To Phase Protection Of 440 V For 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing On Die Cast Housing To Allow Traceability/Authenticity. Fixture Shall Be As Per Is 10322 Complianced.Oem Must Have Its Own In House Nabl Lab Setup For All Testing Facilities For Led Fixtures. (Lm79/Lm80) Certificate/ Report With Liable Warranty Of Product/Accessories From Oem Shall Be Submitted. All As Per Pre Approved By Engineer In-Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached With This Bsr .Led Street Light Fixture With Minimum Lumen Output 3700 Lm , Led Street Light Fixture With Minimum Lumen Output 5600 Lm , Supplying And Drawing Of Xlpe Insulated Lt Aerial Bunched Aluminium Conductor Cable Confirming To Is 14255/1995 And Is 398 (Pt-4)/ 1994 And As Per Discom Specs. On Existing Cross Arms Through I Hook With All Necessary T&P Required Including Binding And Twisting Etc. Complete In All Respect As Required. All As Per Pre Approved By Engineer In-Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached With This Bsr .1 X 25 Sq. Mm. + 1X25 Sq. Mm. (Insulated) , Supply And Fixing Of 11 Kv Pin Insulator Confirming To Is:731:1971 With Latest Ammendment On Existing Bracket Including All Accessories Like Ms Forged Hot Dipped Gi Pin Confirming To Is 2486(Part-I)/1993 & Is:2486 (Part-Ii)/1989 With Latest Amendment, And As Per Latest Discom Specs. Etc. As Required. All As Per Pre Approved By Engineer In-Charge.For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr , Main Cubical Panel / Street Light Control Panel providing and Fixing Testing & Commissioning Of Kiosk Type Weather Proof Out Door Main Cubical Panel Size 750 Mm X 1250 Mm X 500 Mm (App.) Made Out Of 14 Gauge Ms Sheet Front And Back Both Side Openable Duly Hinged Door With Locking Arrangement By Providing Both Side Held Draft And All Required Hard Wares. The Cubical Should Be Dust And Vermin Proof Followed By Coat Of Zimpholite Primer And Finally Two Coats Of Enamal Gray Paint. The Cubical Should Be Mounted With Hard Ware On Angle Iron Frame Size 50 X 50 X 6 Mm And 1500 Legs Duly Painted Framed Be Grouted 750 Mm Below Ground Level With Cement Concrete 1:3:6 In 1000 X 500 X 600 Mm And Providing Brick Masonary Along Angle Iron Frame Above G.L. (As Per Ruidp 2017) , Providing & Fixing Of Iso Certified Company Made Tp&N 415 V Side Handle Operated Double Break Fuse Switch Unit In Sheet Steel Enclosure As Per Pwd Specification For Electrical Works Conforming To Is/Lec 60947-3 : 1999 (W/O Hbc Fuses) Including Making Connections With Suitable Lugs, Testing Etc. As Required. Appropriate Type Test Certificate / Oem Test Report Shall Be Submitted . All As Per Pre Approved By Engineer In-Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached With This Bsr .200 A Rating