Tender For Construction Of Prefab Structure For Uhwc At Balliguda In The District Of Kandhamal For The Year 2026-27. Buildings
Tender Value
18.74 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
14 days left
EMD
19000
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kandhamal → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Prefab Structure For Uhwc At Balliguda In The District Of Kandhamal For The Year 2026-27. Buildings
BOQ
| Sl. No. | Item Description |
| 1 | Civil WorkEarth Work in exavation of foundation in hard soil within initial leads of 50m & lifts of 1.5m including dressing and levelling of bed etc. and adding contractor's profit and over head charges, etc, complete in all respect for the work as directed by the Engineer-in-charge. |
| 2 | Filling in foundation trenches and plinth, with excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour, T&P completed as directed by the Engineer-In-charge |
| 3 | Supplying & filling of foundation with course sand well watered and rammed including cost, cost of all labour, carriage, royalty complete in all respect and as per direction of Engineer-in-Charge. |
| 4 | PCC (M-15) grade with 4cm size Hard granite metal in foundation as per Drawing and Technical Specification complete including cost and conveyance of all materials with and royalties and all labour with T&P required for the work etc. complete including dewatering if required |
| 5 | Providing, lifting, hoisting and laying Reinforced cement concrete of M-20 grade as per approved designs and drawings having a minimum compressive strength (in work test) 200 Kg./Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with 1.5. 516 using 12 mm. to 20 mm, size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned (20mm. size chips not to exceeds 25%) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.RCC work of M-20 grade concrete in Column Base Footing |
| 6 | RCC work of M-20 grade concrete in Column Super StructureGround Floor |
| 7 | RCC work of M-20 grade concrete in Plinth Band |
| 8 | Supplying, straightening, cutting, bending, placing in position and binding reinforcement steel work in RCC/reinforced brick works as per drawing and specification including preparation of respective bar bending schedule and binding (Binding wire to be used as per the IS code) etc. all complete as per direction of Engineer-in-charge Cold Twisted bars, Thermo-Mechanically-treated bars.Ground Floor |
| 9 | Fly Ash bricks Masinary (1:6) (in F & P).First class Fly Ash Brick masonry using F.A. bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.in Foundation and Plinth |
| 10 | in Super Structure |
| 11 | At Outer side 12 mm (1/2 Inch) thick Cement Plaster (1:6) finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.Ground Floor |
| 12 | In Inner Side 16 mm thick Cement Plaster (1:6) finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P 15 required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.Ground Floor |
| 13 | Supplying, fitting & fixing of Vitrified floor tiles(Plain ivory) of premium grade having thickness 8mm to 10mm confirming to IS 13755 of size 60cm x 60cm coloured/printed series. laid on 20 mm thick cement mortar (1:4) (1 cement: 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge.Ground Floor |
| 14 | Supplying, fitting & fixing of Vitrified Industrial floor tiles of premium grade having thickness 8mm to 10mm confirming to 15 4457 of size 30cm x 30cm laid on 20 mm thick cement mortar (1:4) (1 cement: 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-chargeGround Floor |
| 15 | Supplying, fitting and fixing OF CERAMIC tile in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction of E.I.C.Ground Floor |
| 16 | Providing & Applying priming one coat with Cement primer of approved brand and manufacture on plaster surface as per the instruction of Engineer-in-Charge at all elevations including all material & labour complete.Ground Floor |
| 17 | Preparing surface and painting at all height with two or more coats of interior Plastic Emulsion InchRoyale Shyne Inch of Asian Paints or equivalent of approved shade as per the instructions of the manufacturers; giving uniform shade etc in all heights of walls etc. including interior wall primer & providing scaffolding, cleaning, curing and supply of all materials and labour complete as per drawing, design and direction of Architect/Engineer-In-ChargeGround Floor |
| 18 | Providing and applying to outside walls with two or more coats of Anti-Fungal Weather coat water proofing paint including scaffolding and cleaning the surface before application of approved colour and manufacture as per specification, instruction of Engineer-In-charge at all elevations including all material labour complete. (Weather Coat)Ground Floor |
| 19 | Supplying, fitting, fixing of all types of MS Grills / Gates/MS Door made of ISI marked standard MS Angles of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings, including mending to sizes supplying and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.Ground Floor |
| 20 | Labour for fitting & fixing M.S. Grills/shutter, M.S. gate of approved quality and design to openings in proper position including making holes in walls RCC structure and wood work etc and making good to the damages to walls or R.C.C. structure including mending or cutting to sizes or grooved in 73 walls and fixing with R.C.C. (1:2:4) with hard black broken granite stone chips of 12mm to 20mm (1/2 Inch to Inch) (20mm not to exceed 25%) with cost and conveyance of all materials, labour and royalties with all T&P etc. complete. In all floors. |
| 21 | Stainless steel railingSupplying, fitting and fixing of Stainless steel of 304 grade in hand ralling using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm X 32mm X 2mm @0.90mtr. C/C and stainless square pipe bracing of size 32mm X 32mm X 2mm in 74 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes, all materials, labour, T&P etc. required for the complete in all respect.Ground Floor |
| 22 | Providing and fixing ISI marked 32mm thick Flush door shutter with fixing of steel frame conforming to 15: 2202 (part-1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter, including all materials and labours and direction of Engineer-in-Charge in all floors & all heights.Ground Floor |
| 23 | Supplying, fitting, fixing up window (sliding type) made up Powder coated aluminum Section 151-154, 151-155, as windows frame section No. 151-155, 151-153 and 151-167 as shutter frame with 5mm thick Reflective glass as panel fitted 78 with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge.Ground Floor |
| 24 | Providing & Painting with synthetic enamel paint of approved brand and manufacture to give an even shade as per the instruction of Engineer-in-Charge at all floors and all heights including all material & labour complete.Ground Floor |
| 25 | 75MM THICK DRY WALL (EPS BOARD)Providing & fixing of wall panelling with EPS panels in exterior walls 75mm thickness. The panels erected must be water & air tight & fixed with Gl channel of required thickness help of anchor fastener & 40x40 tubular section welded column to column with base cleat at the bottom. T he clear height from floor to ceiling should be 9'7 Inch with all complete as per diriction of Engineer in-chargeGround Floor |
| 26 | 50MM THICK DRY WALL (EPS BOARD)Providing & fixing of wall panelling with EPS panels in exterior walls 50mm thickness. The panels erected must be water & air tight & fixed with Gl channel of required thickness help of anchor fastener & 40x40 tubular section welded column to column with base cleat at the bottom. The clear height from floor to ceiling should be 9'7 Inch with all complete as per diriction of Engineer in-chargeGround Floor |
| 27 | A) MS STEEL STRUCTURE-a) Supply, Fabrication & Erection of Structural Steel Truss structures in position at all levels and heights to the required size, shape, alignment etc by using M.S. square hollow pipe/Angles of TATA make including necessary Base/Cap Plate, Gusset Plates, Stiffener plates, Brackets, Bolts, Cleats, clit angles, Nuts & Bolts, Column cap plate/ bolt etc. as per approved drawing of Architect/Consultant. All welding to be done by using structural steel welding including painting of the structure with two coats of anticorrosive red oxide primer (non flammable) to the exposed surfaces, including necessary equipments, tools & tackles, etc., all complete as per direction of the Engineer-In-Charge. (Truss Member Squara hollow tube - 96 x 48 (2.6 mm) to 80 x 40 (2.6 mm), Tubular section secondary Member -96/48 RHS 3.2 mm, Anchor Bolts - Black unpainted, High Strength bolts for primery connection - Ft = 30.30 KN/Sq. cm, Machine bolts for secondary connectior - Fu 40.00 KN/Sq. cm, and clading (roof) TATA colour sheet -0.45 mm 550 mpa) NOTE: The sizes given above are tentative, it may vary after final design/drawings. |
| 28 | FIBER CEMENT BOARD CEILLING.Providing and fixing False ceiling as per Specifications made of standard G.I. Sections and 12mm thick Fiber cement board Grid type 2x2 ceiling inclusive of all hangers, edge members and other clips complete, with sheets fixed with proper Philip fastner by power drills and joints duly finished ensuring level in line, complete with putty, primer and painting of approved make and colour. Cost includes cutouts for electrical fittings, materials, labour, T&P etc complete as per direction of the Engineer-in-charge |
| 29 | Suppling & fitting fixing of unplasticised polyb vinly chloride (UPVC) (FENESTA/NCL/VEKA LTD) casement Door series dully manufactured using upvcGround Floor |
| 30 | E.I WORKRecessed wiring to light points / fan points/ Exhaust fan / call bell point with 1.5mm2 FRLS PVC insulated SC multistrand copper conductor of ISI marked (Finolex/ Polcab/KEI/ Anchor) with 20mm dia non-metalic PVC flexible conduit (Make- AKJ/ KINJAL/ POLYCAB/ ANCHOR) with 5/6Amp., 250V Modular switch ISI marked and ceeling rose of ISI marked (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze) mounted an Modular G.I. box with Modular base and cover of suitable size (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze), with 1.5sq.mm FRLS PVC insulated single core multistrand Cu. condoctor as earth wire including all accessories and connection. As per direction of Engineer in Charge. (Make of wire Finolex / L&T/ Anchor / KEI/ Polycab/ V-Guard) Group-A. |
| 31 | Group-B. |
| 32 | Group-C. |
| 33 | Supply and fixing of 6Amp 3Pin modular socket with 6Amp modular switch on existing board. (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze.) |
| 34 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze.) separate |
| 35 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze.) |
| 36 | Supply and fixing of 3 nos. of 3 pin 5/6 amp modular socket and S.P. 5/6 amp one way modular switch, 1 no. of 5 pin 15/16 sockety out let and S.P. 15/16 A one way modular switch on modular G.I. Box with modular base and cover. (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze.) |
| 37 | Supplying and fixing T.V. antenna socket outlet MODULAR type ISI marked on the existing switch board / cover including connections etc as requird. |
| 38 | Recessed wiring to submain in the following sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metalic heavy duty flexible conduit 1.6mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required. (Make of wire Finolex / KEI/ Polycab/ L&T/ Anchor)a) 1x1.5mm2 for Inverter wiring. |
| 39 | b) 2x1.5mm2 + 1x1.5mm2. in 20mm dia |
| 40 | c) 2x2.5mm2 + 1x1.5mm2. in 20mm dia |
| 41 | d) 2x4mm2 + 1x1.5mm2 in 20mm dia |
| 42 | Supply and fixing of 8 way DD single pole and neutral (SPN) sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) Warranty on DB is 3 years |
| 43 | Supply and fixing of 5amp to 32 amp rating 240V InchC Inch series miniature circuit breaker suitable for lighting and other loads of the following poles in t he existing MCB DB ISI marked complete with connections testing and commissioning etc. as required. (Make- Legrand/ L&T/ Schneider)a) a)6Amp rating to 32Amp (SP) MCB |
| 44 | Supplying and fixing 40Amp rating,C series,10KA breaking capacity, DP 240 volts, MCB Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 3 years. |
| 45 | Supply, Installation, Testing and Commissioning of main switches (IS 13940 Part-3/1993 on existing surface / wall mounting and complete with HRC fuse links, interconnections, earthing etc. as required as per direction of Engineer In Charge. (Make- Anchor/ Cona/ Havells) a) 32 Amp ICDP M/S |
| 46 | SSupply and fixing of 1200 mm energy saving non decorative (55 watt,having air delivery not less than 225cmm) Hi-speed ceiling fan with connections wire and all accessories Make:( usha/crompton/Havells) |
| 47 | S/F. of 5Step electronic Fan regulator of Anchor/Cona make. |
| 48 | S/F. of 1x18Wt. LED tube light fiting (Philips / Panasonic / Havels) make. |
| 49 | S/F of 72Wt. LED Street light fittings complete with G.I. Barcket (Philips / Panasonic / Havels) make. |
| 50 | S/F of 300mm Exhuast Fan of Usha/Khaitan make. |
| 51 | Supplying and fixing of Co2 Fire extinguisher with mounting clamps with pressure test certificate |
| 52 | Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required. |
| 53 | Supplying and laying 6SWG G.I. wires ISI marked at 0.5meter bellow ground level for conductor earth electrode including soldering etc as required. |
| 54 | Supply of PVC Al. Armored cables ISI marked. (Make- Glowstar/ Polycab/ Nicco/ KEI as per Letter No- 309 19.01.2011 of SEEC (R&B) Odisha) a) 16 sq.mm 2 core |
| 55 | Cable laying on wall surface with steel shaddle MV cable laying up to 25 sq mm on surface |
| 56 | P.H WORKSupplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.32mm dia PVC ASTM pipe (sch-80) roof top |
| 57 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge .20mm dia C-PVC Pipes |
| 58 | 25mm dia C-PVC Pipes) |
| 59 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make) |
| 60 | 15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make) |
| 61 | 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make) |
| 62 | 25mm dia brass full way valve (Shakti make) |
| 63 | 32mm dia brass full way valve (Shakti make) |
| 64 | Heallth Faucet |
| 65 | 125mm CP grating |
| 66 | 15mm size C.P. flange |
| 67 | 20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make) |
| 68 | 15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make) |
| 69 | Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge. 1000 liters capacity PVC water storage tank top of floor |
| 70 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge. Ground floor |
| 71 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge. Ground floor |
| 72 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.Ground floor |
| 73 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 74 | 110mm U-PVC P Trap(Ori Plast/Finolex/Supreme Make) |
| 75 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 76 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 77 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 78 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 79 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 80 | 110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make) |
| 81 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 82 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 83 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral p or s trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-chargeEuropean water closet with 's' trap plain(Hindware/Parryware/Neycer make) |
| 84 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge.550mmx400mm W.H.basin (Jaquar/Johnson/Hindwarer make)with 15mm dia C.P.pillar cock (Plaza make) with 22 Inch x 16 Inch pedestal |
| 85 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.25mm x 600mm long CP towel rail |
| 86 | CP towel Ring |
| 87 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.600 x 125mm plate glass shelf with CP guard rails(Jaquar)AKP-CHR-35771P |
| 88 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.Design Large Mirror |
| 89 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.CP soap holder (Jaquar)ACN-ACR-1131N |
| 90 | Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.15mm CP revolving shower (Jaquar)CON-CHR-209KN |
| 91 | Ext. S/D Portion;Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge.100mm dia P.V.C. pipe |
| 92 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge.Inside size 76cmx76cmx46cm with 18 Inch dia RCC MH cover |
| 93 | Supplying all materials labour T&P and constructing .91m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender