Tender For Special Repair To Bridge Over Bagbada Nallah At 2.900Km On Gadadhatgiri Marga Chhak To Bagbada P.S.Road For The Year 2026-27
Tender Value
10.17 Lakhs
Estimated cost
Bid Submission
07 Aug 2026
5 days left
EMD
10174
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baleshwar → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bridge Over Bagbada Nallah At 2.900Km On Gadadhatgiri Marga Chhak To Bagbada P.S.Road For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Finishing wall surface of walls with Acrylic wall putty ( water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging, charges with cost of all materials taxes labour T&P etc complete and as per specification etc complete in all respect in all floors or as directed by the Engineer-in-charge |
| 2 | Priming 1 coat with any appproved Primer of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging, charges with cost of all materials taxes labour T&P etc complete in all respect in all floors or as directed by the Engineer-in-charge |
| 3 | Painting 2 (Two) coats with any approved enamel paint over a coat of priming to new wood work and iron work including cost of the primer and paint sand papering polishing the surface with cost conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect or as directed by the EIC. |
| 4 | Construction of RCC guide posts of 150 mm dia M15 grade cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC posts not to exceed 1 in 500 as per drawing and Technical Specification etc.complete as per direction of Engineer-in-charge. |
| 5 | Finishing walls with water proofing cement paint of approved shade on new work two coat to give an even shade including cost, conveyance, taxes and labour with T&P etc complete in all respect or as directed by the EIC. |
| 6 | Labour for scraping cleaning the road surface applying tack coat using 3.0kg of bitumen for 10 sqm and laying 75km thick biltup spray grouting in two layers 37.50mm thick each layer using 0.45cum of 25mm to 40mm size hard granite metal and 12kg penetration grade of bitumen for 10 sqm in each layer with 0.12 cum of 12mm size hard granite chips as key stone for 10 sqm spreading over and laying including heating pouring and spreading over and spreading bitumen metal and chips and rolling with PRR including H&R charge of PRR and all other machineries and including cost, conveyance of bitumen, metal and chips complete as per specification and direction of EIC |
| 7 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per Clause 503 of MoSRT&H Specifications for Road & Bridge works (4th Revision) with all cost conveyance royalty, taxes of the materials and labour with T&P required for the work etc. complete or as directed by the Engineer-in-charge. |
| 8 | Labour for laying 20mm thick premix carpet using 0.27cum of 13.2mm to 5.6mm size crushed stone chipping and 14.60kg. penetration grade of bitumen for 10sqm including hand packing to proper camber and consolidation with PRR including hire and running charges of PRR, hot mix plant, bitumen boilers and all other T & P articles but including cost and conveyance of chips and bitumen complete as per specification and direction of the Engineer-in-charge |
| 9 | Labour for laying 6mm thick precoated seal coat Type-B using 0.06 cum of 6.7mm size chips as per sieve analysis and 6.8Kg of bitumen per 10sqm.including hire and running charges of PRR, hot mix plant, tar boiler and all other T&P articles including cost and conveyance of chips and bitumen complete as per specification and direction of the Engineer-in-charge |
| 10 | Conveying from stacks spreading moorum on road surface watering and rolling with PRR etc with all cost conveyance royalty, taxes of the materials and labour with T&P required for the work etc. complete or as directed by the Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender