Communications and Information Technology Government Departments Closing in 9 days TDR #56779954

Tender For Repair And Maintenance Of Toilets,Water Supply Line And Providing Reinforced Cement Concrete Slab At Plinth Level In Power Plant Room At G.F. In T.E. Asifabad Under Nizamabad Ba.

Issued by Government Departments · Adilabad, Telangana
Tender Value
2.25 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
9 days left
EMD
4506
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Adilabad → Telangana
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair And Maintenance Of Toilets,Water Supply Line And Providing Reinforced Cement Concrete Slab At Plinth Level In Power Plant Room At G.F. In T.E. Asifabad Under Nizamabad Ba.

BOQ

Name of Work:- Repair and maintenance of toilets,water supply line and providing R.C.C. slab at plinth level in power plant room at G.F. in T.E. Asifabad under Nizamabad BA.
Sl. No. Item Description
1Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer in-charge
2Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
3Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge.
4All kinds of soil
5Supplying and filling with moorum in trenches , sides of foundations plinth and under floor and levelling of site in layers not exceeding 20 cms in depth consolidation each deposited layer by watering , ramming etc. complete.
6Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
7a)1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
8Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
91:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
10Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
11Thermo-Mechanically Treated bars of grade Fe-500D or more.
12Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
13a) 250x16 mm
14Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
15100 mm
16Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
17One or more coats on old work.
18Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-charge.
19Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:
20Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).
21Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.
2210 litre capacity - White
23Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
24Semi rigid pipe
25i) 32 mm dia
26Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall
2740 mm nominal outer dia. Pipes.
2825 mm nominal outer dia Pipes
29Providing and fixing PTMT bib cock of approved quality and colour.
3015mm nominal bore, 86 mm long. Weighing not less than 88 gms.
31Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
32Providing and fixing CPVC union in CPVC pipe line including cutting and jointing with CPVC solvent cement etc complete.
33a) 40 mm nominal bore
34Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade :
35Old work (one or more coats)
36Providing and fixing uplasticised PVC connection pipe with brass unions :
37a) 45 cm length
38i) 15 mm nominal bore
39Providing and fixing CPVC ball valve in CPVC pipe line including cutting and jointing with CPVC solvent cement etc complete.
40a)25 mm nominal bore
41Carting out of building rubbish / malba / similar unserviceable, dismantled, excavated or waste materials by mechanical means, through private carrier including lifting upto 4 floors, loading, transporting, unloading to municipal dumping ground beyond 50 m initial lead,or in any other compound as decided by the Engineer-in-charge, for all leads including all lifts involved.
42Replacing existing damaged sanitary pipes by providing UPVC SWR soil waste and vent pipes by cutting, removing, replacing with working pressure 6kgf/sq.cm conforming to IS : 13592 Type B including jointing with 'T' shaped seal/rubber ring conforming to IS : 5382 and with solvent cement or rubber lubricant as the case may be with pipes of outer dia (concealed pipe joints to be jointed with rubber ring and solvent cement and exposed joints to be jointed with rubber ring and rubber lubricant. (i)Single socketed pipe(couplings,other accesories will be paid seperately)
43110mm deameter
4475mm deameter
45Providing and fixing unplasticised -PVC pipe clips of approved design
46a)110 mm
47b)75 mm
48Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :
49150 mm diameter
50Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design :
51150 mm diameter S.W. pipe Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56779954
AUTHORITY Government Departments
TENDER VALUE 2.25 Lakhs
LAST DATE 10-08-2026
Authority
Authority Name Bharat Sanchar Nigam Limited
Work Description Tender for Repair And Maintenance Of Toilets,Water Supply Line And Providing Reinforced Cement Concrete Slab At Plinth Level In Power Plant Room At G.F. In T.E. Asifabad Under Nizamabad Ba.
Basic Detail
Tender No NIT No. 44/NIT/CECTSCZ/HYD/2026
Bidding Type Tender
Location
City Adilabad
State Telangana
Key Dates
Publish Date 01 Aug 2026
Submission Date 10 Aug 2026
Open Date 12 Aug 2026
Finance
Tender Value 2.25 Lakhs
Tender Fee 590
EMD 4506
Exemption Available
Document List
Tendernotice_1.pdf
BOQ_334089.xls
edb56f67-0b70-4a07-a232-dce97715855d.html

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 01, 2026
11:30 IST

Tender Published

Tender notice published.

Today
Aug 10, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 9 days
Aug 12, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 11 days

Tender Documents

Download All (ZIP) ↓
pdf

Tendernotice_1.pdf

xls

BOQ_334089.xls

html

edb56f67-0b70-4a07-a232-dce97715855d.html

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders