Supply Of Design, manufacturing, supply, installation, testing, commissioning and prove out of CNC Tandem underfloor Wheel lathe on turnkey basis as per attached specification.

Sharing tender

Supply Of design, manufacturing, supply, installation, testing, commissioning and prove out of cnc tandem underfloor wheel lathe on turnkey basis as per attached specification. , cnc tandem type under floor wheel lathe as per specification attached with the tender. main fe atures and description of tender requirements in section-iv & technical specification in section-v for simultaneo us and/or independent re- profiling of two wheel sets of one bogie of broad gauge (bg), coaches of vande bhar at trainset / icf/lhb coach rake / memu / emu and demu rake without removing the wheel sets, bogie brake gear, axle box covers or any other components of the coaches as per drawings mentioned in annexure-f of sec tion-vi. re-profiling of two wheel sets simultaneously at both ends, independent wheel sets with in-board or ou t-board journals by means of suitable hold-down on one bogie consisting of two wheel sets holding devices. ma chining of inside faces of the wheel in continuation to profile turning of the tread & flange for two wheel sets of a bogie. cnc tandem underfloor wheel lathe shall consist of cnc-underfloor wheel lathe(s) installed to maintai n center distance between wheel sets as per technical parameters mentioned in clause 2 of section iv of specif ication attached with tender. the machine [tufwl] shall be capable of working simultaneously or independentl y as per requirement having design one fixed with respect to other movable. structural elements like beds, col umns, cross rail, tool slides of individual machine shall be made up of dual column construction, rigidly connect ed by cross rail. all critical load carrying elements of machine subjected to cutting loads shall be made up of gr ey cast iron construction to enable vibration damping and durability ] , camc for 8 years after completion of 2 years warranty period from the date of commissioning & p roving out of machine by supplier. the details of camc as defined in clause 17 of section v of specification app ended with this tender. bidders are required to attach the price break up in year wise format for 08 years in pdf file. [ warranty period: 2 years, amc period: 8 years, rate of discounting: 10 % ] ] , a set of concomitant accessories as per para 4.2.1 of section iv of specification appended with t he tender. bidders are required to attach the price break up of these accessories in pdf file along with submitte d bid. ] , a set of optional accessories as per para 4.3 of section iv of specification appended with the ten der. bidders are required to attach the price break up of these accessories in pdf file along with submitted bid. ] , a set of any other accessory which in the opinion of supplier is essentially required for making th e machine fully functional. bidders are required to attach the price break up of these accessories/spares in pdf file along with submitted bid. ] , concomitant works:- concomitant works as per clause 4.2.2 of section iv of attached specificatio n with tender. the cost of these works shall be quoted separately and the cost shall be included for the purpos e of commercial evaluation. ] , consumables:- defined at clause 6 of section v of specification appended with tender. the list of consumable spares shall be furnished and quoted along with their unit rates. consumables shall be supplied al ong with the machine or as per agreed time table, if ordered. bidders are required to attach the price break up to these consumables in pdf file along with submitted bid. ] , cost of comprehensive preventive maintenance to be provided during warranty period should be quoted separately. details may be referred at clause 16 of section v of specification appended with this tender . ] , turnkey charges: foundation, installation and commissioning and proving and handing over of m achine on turnkey basis as specification append with tender. ] , cnc tandem type under floor wheel lathe as per specification attached with the tender. main fe atures and description of tender requirements in section-iv & technical specification in section-v for simultaneo us and/or independent re- profiling of two wheel sets of one bogie of broad gauge (bg), coaches of vande bhar at trainset / icf/lhb coach rake / memu / emu and demu rake without removing the wheel sets, bogie brake gear, axle box covers or any other components of the coaches as per drawings mentioned in annexure-f of sec tion-vi. re-profiling of two wheel sets simultaneously at both ends, independent wheel sets with in-board or ou t-board journals by means of suitable hold-down on one bogie consisting of two wheel sets holding devices. ma chining of inside faces of the wheel in continuation to profile turning of the tread & flange for two wheel sets of a bogie. cnc tandem underfloor wheel lathe shall consist of cnc-underfloor wheel lathe(s) installed to maintai n center distance between wheel sets as per technical parameters mentioned in clause 2 of section iv of specif ication attached with tender. the machine [tufwl] shall be capable of working simultaneously or independentl y as per requirement having design one fixed with respect to other movable. structural elements like beds, col umns, cross rail, tool slides of individual machine shall be made up of dual column construction, rigidly connect ed by cross rail. all critical load carrying elements of machine subjected to cutting loads shall be made up of gr ey cast iron construction to enable vibration damping and durability ] , camc for 8 years after completion of 2 years warranty period from the date of commissioning & p roving out of machine by supplier. the details of camc as defined in clause 17 of section v of specification app ended with this tender. [ warranty period: 2 years, amc period: 8 years, rate of discounting: 10 % ] ] , a set of optional accessories as per para 4.3 of section iv of specification appended with the ten der. bidders are required to attach the price break up of these accessories in pdf file along with submitted bid ] , a set of any other accessory which in the opinion of supplier is essentially required for making th e machine fully functional. bidders are required to attach the price break up of these accessories/spares in pdf file along with submitted bid. ] , consumables:- defined at clause 6 of section v of specification appended with tender. the list of consumable spares shall be furnished and quoted along with their unit rates. consumables shall be supplied al ong with the machine or as per agreed time table, if ordered. bidders are required to attach the price break up to these consumables in pdf file along with submitted bid. ] , a set of concomitant accessories as per para 4.2.1 of section iv of specification appended with t he tender. bidders are required to attach the price break up of these accessories in pdf file along with submitte d bid. ] , concomitant works:- concomitant works as per clause 4.2.2 of section iv of attached specificatio n with tender. the cost of these works shall be quoted separately and the cost shall be included for the purpos e of commercial evaluation. ] , cost of comprehensive preventive maintenance to be provided during warranty period should be quoted separately. details may be referred at clause 16 of section v of specification appended with this tender . ] , turnkey charges: foundation, installation and commissioning and proving and handing over of m achine on turnkey basis as specification append with tender. ]