Tender For Special Repair To Otm Accn Bldg No P-02 Of 1 Ew Bn Under Ge (West) Jrc
Tender Value
49.21 Lakhs
Estimated cost
Bid Submission
26 Aug 2026
3 days left
EMD
98420
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Otm Accn Bldg No P-02 Of 1 Ew Bn Under Ge (West) Jrc
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 19-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 26-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete in ground floor and paving/as in sunken portion ( below or above ground level) all as specified |
| 2 | M&L for cement concrete type E - 2, 1:5:10 (using 40 mm graded brick aggregate) as in sunken flooring complete all as specified. |
| 3 | M&L for 15mm thick rendering in 1:3 CM with using appropriate WPC as per manufacturer's information from SIKA Plastocrete Plus/FOSROC/ DR Fixit/ STP/CICO on brick/concrete surface, finished even and smooth without using extra cement. |
| 4 | M&L 25mm thick cement concrete flooring type B-1, 1 :2 : 4, using 20 mm graded stone aggregate finishing cement concrete surface even and smooth without using extra cement. |
| 5 | M&L for 40mm dia GI pipe,med grade beveled cut at both ends by making hole in walls sunken portion aprox above the RCC slab and ceiling finished the hole with cement plaster 1:2 to match with existing surface complete etc.(Measured for cutting holes shall be paid in concerned sch item) |
| 6 | Dismantling of brick tiles single layer as in roof covering complete all as specified |
| 7 | Demolition of mud in roofs any thickness including plastering and leeping(whether full thickness removed or only a part thereof) all as specified. |
| 8 | Cleaning/Roughening surfaces of old concerete floor/roof by picking , sweeping clean and washing down with water to romove the dust etc complete all as spd. |
| 9 | M&L for PCC pedding with cement concrete type B-1, 1:2:4 (using 12.50mm graded stone aggregate) to top surface of slab in slop 1:40,finishing the surface even and smooth without using extra cement comlete all as specified. |
| 10 | M&L applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 Kg per Sqm over applying primer bitumen coat @0.30 kg per sqm including cleaning surfaces on roof top. |
| 11 | M&L APP based polymeric membrance minimum weight not less than 3.0kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150gms/sqm) land on primed surface by forced application (Complete surface sealed by gas flame) with over lap of 15 cm complete all as specified and directed. |
| 12 | M&L 40mm th. Brick tiles laid on bedding layer of cement mortar 1:3, 15mm thick and joints grouted flush in cement mortar 1:6 mixed with 5% of crude oil by weight of cement over APP membrane |
| 13 | Fixing only 40mm th. Brick tiles laid on laid on bedding layer of CM 1:3, 15mm thick joints grouted flush in cement mortar 1:6 mixed with 5% of crude oil by weight of cement on APP (except tiles) |
| 14 | Taking down cement plaster of any description any thickness /dado/Skirting/ including raking out joints hacking for key scrubbing down with water all as specified. |
| 15 | M&L 15mm thick rendering on wall in CM 1:6 with appropriate WPC as per manufacturer's information from SIKA Plastocrete Plus/FOSROC/ DR Fixit/ STP/CICO on brick/concrete surface, finished even and smooth without using extra cement. |
| 16 | M&L 15mm thick rendering on wall in CM 1:4 with appropriate WPC as per manufacturer's information from SIKA Plastocrete Plus/FOSROC/ DR Fixit/ STP/CICO on brick/concrete surface,finished even and smooth without using extra cement. |
| 17 | M&L Plastering 5mm thick in cement mortar (1:3) finished even and smooth without using extra cement as on ceiling complete all as specified |
| 18 | M&L for 15 mm thick cement mortar 1:4 on brick or concrete surface finished even and smooth with neeru finish to plaster cement all as specified |
| 19 | Material and labour for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper over one coat of thin layer of putty complete all as specified. |
| 20 | M&L for applying white wash of 3 coats as in ceiling incl preparation newly plastered surfaces as specified and directed. |
| 21 | Complete removal of existing treatment on wall and applying Two coat of Oil distemper (white or tinted) on one coat of thin layer of putty , on plastred surfaces, prepara-tory to distempering on walls etc (Surface finished even and smooth) complete all as specified and as directed. |
| 22 | M&L for preparing new plastered wall surfaces and applied two coat of cement base paint over one priming coat all as specified and directed. |
| 23 | Complete removal of existing treatment on wall and Material and labour for preparation of old plastered surfaces on walls and applying two coats of cement base paint complete all as specified and as directed. |
| 24 | M&L for applying white wash of 1 coats as in ceiling incl preparation old painted surfaces as specified and directed. |
| 25 | Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) and disposal of rubbish outside MD land complete all as specified |
| 26 | M&L Non skid Coloured ceramic tiles 7 to 8 mm thick (squre or rectangle) area of each tile exce 0.11 SqM but not exceeding 0.18 SqM in floors etc, set and jointed in neat cement slurry and pinted in white or coloured cement to match with including 15mm thick screed bed in cement mortar 1:6. |
| 27 | M&L coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over 10 mm thick cement plaster in cement mortar 1:4. |
| 28 | Demolition of re-inforced cement concrete of any description and in any position not otherwise specifically provided for |
| 29 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished surfaces of concrete |
| 30 | M L for Reinforced cement concrete type B1 1:2:4 (20 mm graded aggregate) (nominal mix) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like |
| 31 | M&L mild steel deformed bars 8mm dia and over cut to length bent to shape required including cranking bending and binding with and including mild steel wire annealed not less than 0.9 mm dia or securing with clips conforming to Gd I IS-432 |
| 32 | M&L 20mm Granie (of any type) work(table rubbed and polished) in steps, jambs , pillars, window cills, cooking platforms, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick cement screed bed in cement mortar 1:4 complete all as spd and directed. |
| 33 | M&L for rounding/moulding to edges of Kota stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooking platform and other similar situations etc |
| 34 | M&L for Mirror polishing on marble/granite/Kota stone/stone work where ever required to give high gloss finish complete etc |
| 35 | Demolition Cement concrete (unreinforced)Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 36 | M&L 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggr) as in plinth protection/path finishing the surface even and smooth without using extra cement complete all as spd and directed. Note : Plinth protection shall be laid in (1:20) slope. The concrete shall be laid at a stretch not exceeding 3metre in length. Joint gap between adjoining slab, at corners and at junctions of walls shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen 85/ 25 grade mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3 metre interval at corner and as junction of walls. |
| 37 | Demolition of brick or stone masonary built in cement mortar complete all as specified and directed. |
| 38 | M&L brick work with sub class B bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as spd and directed. |
| 39 | M&L brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6 M mean radius built in CM 1:6 complete all as specified and directed. |
| 40 | Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area not exc 1.5 Sqm each all as specified. |
| 41 | Taking down shutters any description exc 1 sqm but n.exc 2 sqm each and all as specified and directed. |
| 42 | Taking down shutters of any description exc 1 sqm but not exc 2 sqm each all as specified and directed. |
| 43 | Taking down chowkats or frames with shutters (with out taking of shutter from the frame) of any description alongwith fittings exc 1.5sqm n.exc 4 sqm each complete all as specified and directed. |
| 44 | S&F pressed steel door frame with one or more rebate including necessary fixing lugs, hinges, lock stricking plate of size 105 x 60mm complete all as specified and directed. |
| 45 | M&L for PCC Type B0-1:2:4 using 12.5mm graded aggregate as in filling of pressed steel frame, hold fasts and similars articles complete all as specified and directed. |
| 46 | Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required built in cement motar in brick wall depth of embedded portion of holdfast exc half brick but n exc one brick |
| 47 | S&F 35mm thick flush door shutter, solid core construction with block board core, and plywood face panels, commercial type on both side complete all as sped and directed. |
| 48 | S&F 2nd class hardwood glazed and skelton door shutters 35 mm thick divided into squares open rebated and prepared to receive glass, gauge etc edges of framing plain, chamfered, rounded tfitted with mltred beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.20 (b) supplied and fitted to chowkats with plain, chamfered or rounded mited and rebated bars any numbers. |
| 49 | Steel window/ventilator 1.25 mm thick Box type ERW hollow P section of size 60mm x 25 mm single rebated comprises skelton shutter ERW Sec 50 MM x 20 mm and 1 mm thick and two openable leaf consisting two Nos sash bar of T-section 20 mm x 3mm complete welded to frame with one vertical mullion of ERW box type T section of size 60mm x 25 mm and 1.25 mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B-1, including shop coat primer and following fittings welded to shutters:-i) Hold fasts 150 mm long,12mm x 3mm made to shape -04 No’s, (ii) Handle of Z sec 20mm x 25mm , 100mm long per leaf -1 No’s (iii) MS tower bolt 150 mm long per leaf -2 No’s (iv) Z sec 20mm x 25 mm , 100 mm long stopper per leaf -1 No (v) Cleat 55 mm long of hollow square 15mm x 20mm x 63 mm welded to hinges per leaf -01 No (vi) MS pintal hinges of size 75mm x 12 mm per leaf -02 Nos (vii) Fabrication and fixing arrangement complete. |
| 50 | All as per description of item No 49 above but glazed shutter. |
| 51 | S&F framed work such as grills & gates, gratings with ends of bars shouldered on forged in spickes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, rallings, framework of water tanks and similar work conforming to Fe-290 Gde-E-165 |
| 52 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and avg erage with aperature 1.18 mm fixed with tinned tacks, or galvanised wire staples. |
| 53 | S&F sheet glass 3mm thick plain ordinary quality and glazing with oil putty wooden beads as directed in squares n.exc 0.50 sqm in each pane. |
| 54 | S&F Butt hinges, medium weight cold rolled 100 mm size ISI marked. |
| 55 | S&F aluminium anodised barrel tower bolts of extruded section 150mm long all as specified/ |
| 56 | S&F Extruded aluminium alloy handles fabricated type anodised 150mm size |
| 57 | S&F aluminium alloy anodised sliding door bolts 250 mm long with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections as specified. |
| 58 | S & F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete. |
| 59 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 150 mm |
| 60 | Hacking out old broken glass (any thickness, size quality or description) from matel frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones. |
| 61 | M&L for applying two coat of synthetic enamelled paint over one coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 CM girth or width all as directed by the Engr in charge |
| 62 | M&L for applying one coat of synthetic enamelled paint including preparation of old decorated steel surfaces of any description not otherwise described over 10 CM girth or width all as directed by the Engr in charge |
| 63 | M&L for applying two coat of synthetic enamelled paint over one coat of pink primer including preparation of new wood surfaces of any description not otherwise described over 10 CM girth or width all as directed by the Engr in charge |
| 64 | M&L for applying one coat of synthetic enamelled paint including preparation of old treated wood surfaces of any description not otherwise described over 10 CM girth or width all as directed by the Engr in charge |
| 65 | S&F PVC solid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinfoced with MS square tube, suppling and fixing in opening as per specification and drawing. |
| 66 | S&F factory made solid panel pvc door shutter 30mm thick (style) consisiting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing. |
| 67 | Solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube |
| 68 | M&L for PCC (1:2:4) type B-1(using 20 mm graded stone aggregate) as in cills, PCC blocks, coping, seismic and other similar bands, plinth bend, etc including weathering slightly rounded or chamfered angles and throuting , including necessary form work etc all as specified. |
| 69 | M&L for PCC Type B0-1:2:4 using 12.5mm graded aggregate as in pressed steel frame, hold fasts and similars articles |
| 70 | Taking up or down 15 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specifed and directed. |
| 71 | Taking up or down 20 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specifed and directed. |
| 72 | S&F 15mm bore GI tubing medium grade fitting complete to wall and ceiling or laid in floor complete all as specifed and directed. |
| 73 | S&F 20 mm bore GI tubing medium grade fitting complete to wall and ceiling or laid in floor complete all as specifed and directed. |
| 74 | Cutting chases, pinning in making good to facings where reqd and pointing in cement mortar 1:3 to ends or edges of shelves , for water tubing etc and making good, cutting exc 10cm girth but not exc 20cm girth in stone walls |
| 75 | Dismantiling of water tanks of capacity exc 250 & n exc 500 ltrs incl all necessary fittings complete. |
| 76 | S&F 500 ltrs PVC rotational moulded polyethylene water storage tanks double layer made (cylindrical vertical with closed top) hoisted and fixed in position complete all as specifed and directed. |
| 77 | S&F 1000 ltrs PVC rotational moulded polyethylene water storage tanks double layer made (cylindrical vertical with closed top) hoisted and fixed in position complete all as specifed and directed. |
| 78 | S&F 20mm Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair |
| 79 | S&F ball float valve brass with epoxy coated aluminimum rod for 20 mm bore pipe high pressure with polythelene high density float and complete screwed for iron pipe. |
| 80 | S&Fin repair 15mm dia Bib taps cast copper alloywith fancy type chromium lated crutch or butterfly handle screwed down, scewed for iron pipes or for brass ferrule |
| 81 | S&F 15mm dia Brass stop valves chromium plated, fancy type with long shank and cup concealed type screwed down, highpressure with crutch or butterfly handle, screwed both ends for iron pipe or for unlori as specified and fixed in repairs. |
| 82 | S&F 15mm dia Brass stop valves chromium plated, fancy type with long shank and cup screwed down, highpressure with crutch or butterfly handle, screwed both ends for iron pipe or for unlori as specified and fixed in repairs. |
| 83 | S&F in repair 15mm dia fancy type pillar taps cast copper alloy with capstan heads chromium plated scewed down high pressure with long scrwed shanks and fly nuts screwed for iron pipes |
| 84 | S&F looking mirror 5mm thick of selected quality glass, mounted on 4-6 mm thick PVC sheet or ply board and with aluminnium frame work fitted with chromium plated brass screws and cup washers direct fitted to wall with all arrangement as necessary including taking old one. |
| 85 | S&F in repair Vitreous china wash hand basin (550X400mm) white, flat back excluding taps, including brackets &32mm waste cuppling complete all as specifed and directed. |
| 86 | S&F Vitreous China Water closet (Squatting pattern) \\"Orissa Pattern\\" size 580x 440 mm white with 'P' or 'S' trap, front or back inlet and foots rests any pattern (excluding flusing cistern and flush pipe) in repairs complete |
| 87 | S&F Vitreous China wash down Water closet pan (pedestal pattern) \\"with plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging divice (excluding flusing cistern and flush pipe) in repairs complete |
| 88 | S&F 10 Litre PVC valveless syphonic action flushing cistern low level white with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dis for low level cistern in repairs |
| 89 | Vitreous China urinals, hallf stall urinals (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) |
| 90 | M&L 75mm PVC (SWR) floor trap , plain with CP grating including jointing with solvent cement complete all as spd and directed |
| 91 | S&F in replacement CP grating 125mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani Trap or floor trap complete all as specified. |
| 92 | S&F Health faucet heavy,mild steel chromium plated suitable for 15mm dia pipe with 1.25mtr long flexible tube and ABS wall hook including making connection and fixed in position complete in all respect as specified. |
| 93 | S&F 15mm PVC connection 450mm long with PTMT nuts of superior quality as specified |
| 94 | S&F in toilet paper holder of brass chromium plated fixed to walls with brass screws |
| 95 | Supply and fixed Soap dish, any type fixed to walls with plugs with chromium plated brass screws |
| 96 | S&F for brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges etc complete all as spd and directed. |
| 97 | S&F brass chromium plated shower rose 125mm size complete all as spd and directed. |
| 98 | Excavation in trenches not exc 1.5m wide and not exc 1.5m deep for foundation etc for shafts, wells, cesspits , manholes pier holes, etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 99 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cms in soft /loose soil. |
| 100 | Removing excavated material n exc 50 m depositing where directed at a level n exc 1.5m above the starting point complete all as spd. |
| 101 | Demolition and breaking up drain pipes 150mm bore (salt glazed ware, AC or Reinforced) set in cement mortar all as spd and directed |
| 102 | M &L for 150mm bore SGSW drain pipe (Grade-A) laid in trenches and jointed in CM 1:1 and tested complete all as spd and directed |
| 103 | M&L for concrete bed for 150mm in PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) to drain pipes including packing under,haunching against the sides of pipes after they are laid and tested complete all as specified and directed. |
| 104 | Cutting into existing manholes for connecting new drains making good to open and rendering, cutting out existing benching for and forming branch channel 1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1, smooth finished and reforming benching complete all as specified and directed. |
| 105 | Demolition of re-inforced cement concrete of any description and in any position not otherwise specifically provided for |
| 106 | M&L RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in precast RCC manhole / septic tanks ,drain,covers including all form work and setting in CM 1:4 all as specified and shown on drgs. |
| 107 | M&L mild steel deformed bars 8mm dia and over cut to length bent to shape required including cranking bending and binding with and including mild steel wire annealed not less than 0.9 mm dia or securing with clips confomring to Gd I IS-432 |
| 108 | Material and labour for cement concrete 1:2:4 Type B-1using 20 mm graded stone aggregate as in copings, weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed. |
| 109 | M&L for repairing of R.C.C projections, chajjias, roof slab, facia etc in patches not exceeding 3 Sqm in each patch by necessary preparation. Scarpping, cutting, chiseling derusting and cleaning exposed reinforcement, surfaces of damaged, loose R.,C.C surfaces and applying one coat of rust stop solution of approved make and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggreagates and reinforced with welded TMT bars/mesh (If Reqd) of weight exc 2 kg per sqm but n.exc 3kg/sqm with or without facia and finished with cement and sand motar (1:3) using coarse sand and thickness of R.C.C member n.exc 100mm including necessary form work and applying two coats of finishes to match with the existing surfaces in at any height complete all as specified and directed by Engr-in-charge.(Note : Cost of form work, TMT bars and welded mesh shall be deemed to be included in unit rate quoted by the contractor complete all as specified and as directed. |
| 110 | Dismantling of 100mm dia cast iron or reinforced concrete drain pipes, jointed in cement motar and taking out of trenches , if required. |
| 111 | Dismantling of 75mm dia cast iron or reinforced concrete drain pipes, jointed in cement motar and taking out of trenches , if required. |
| 112 | S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls complete |
| 113 | S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls |
| 114 | S&F110mm PVC (SWR) bends |
| 115 | S&F 75 mm PVC (SWR) bends |
| 116 | S&F110mm PVC (SWR) junction single, (Single T) equal or unequal etc any type of fittings |
| 117 | S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal etc any type of fittings |
| 118 | S & F for PVC 110mm (SWR) vent cowl |
| 119 | S&F stack clamps out of 50mmx5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof |
| 120 | M&L spout pipe 32mm dia GI pipe beveled cut at both ends by making hole in walls sunken portion aprox above the RCC slab and ceiling finished the hole with cement plaster 1:2 to match with existing surface complete etc. |
| 121 | Dismantling structural steel work including doors, gates but excluding framed truss etc |
| 122 | Dismantling of plain steel sheet, any gauge, thickness, including nainital or similar pattern roof covering. |
| 123 | M&L for pre galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wll fixed with self tapping screws as specified. |
| 124 | S &F Roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe 410 -W(Gde-E- 250) quality-A. |
| 125 | Demolition of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets |
| 126 | Providing & fixing false ceiling at all heights with GFRG (Glass Fibre Reinforced Gypsum) false ceiling tiles with semi perforated 12mm thick micro tegular edged GRG false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions. |
| 127 | Taking down carefully aluminium / copper point wiring (light / fan / socket or power) complete including fitting such as switches, ceiling roses, socket, light fittings, regulators etc complete and making good disturbed surfaces of walls, floors |
| 128 | Taking down main switch / DB as directed by Engineer-In-Charge. |
| 129 | Taking down unserviceable submain/ cable of any size as directed by Engineer-In-Charge. |
| 130 | M&L for concealed point wiring complete with 2.5 sqmm single core multistranded copper conductor FRLS, PVC insulated and unsheathed cable 650 /1100 volts grade drawn through & including PVC conduit ,medium grade with accessories like bends, tees, junction boxes etc fix on wall or ceiling surfaces all as specified including 2.5 sqmm, FRLS type, copper multistranded cable as earth wire including switch/sockets and regulator and including cover plate white colour all as specified and directed for |
| 131 | Supply and fixing piano/flush type switch 1 way 16A |
| 132 | Supply and fixing piano /flush socket 1 way 16 amp |
| 133 | M&L for concealed point wiring complete with 1.5 sqmm single core multistranded copper conductor FRLS, PVC insulated and unsheathed cable 650 /1100 volts grade drawn through & including PVC conduit ,medium grade with accessories like bends, tees, junction boxes etc fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS type, copper multistranded cable as earth wire including switch/sockets and regulator and including cover plate white colour all as specified and directed for:One light /fan/cell bell point controlled by one one way switch as directed. |
| 134 | One 3 pin piano / flush socket outlet, 5Amps, independent with other switch |
| 135 | One 3 pin piano / flush socket outlet 5 amps on same board with other switches. |
| 136 | Supply and fixing piano/flush type switch 1 way 6A, |
| 137 | Supply and fixing piano/flush type socket 1 way 6 amp |
| 138 | Supply and fixing sheet metal enclosures for DB's SPN when MCBs to be used 8 way double door |
| 139 | S&F MCB SPN 40 to 63 Amps rating 240 volts, 10KA 'c' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commisioning |
| 140 | M&L for sub main wiring with TWO core PVC insulated and unsheathed cable 6 sqmm with multi stranded copper conductor , FRLS type cable drawn through and including PVC concealed conduit of suitable size complete with all accessories alongwith provn of 2 run of 6 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire. (2 runs of cable and one run of conduit shall be measured as one length) |
| 141 | M&L ceiling rose surface bakelite 65 x 50 mm three terminals complete all as specified. |
| 142 | Earthing complete with galvanised steel earth plate electrode 60cm×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion Note :- testing should be carried out by contractor |
| 143 | Supply and fixing M & L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings |
| 144 | S&F LED tube light fitting 20W (Double side) including LED lamp 20W with 2100 lumen output with internal surge protection device of 4KV with voltage band of 140-280V CRI-6500K (White light) fixtures box type and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.50mm 3 core complete all as specified and directed. |
| 145 | Supply and fixing MCB SP 6-32 Amps 240 volts |
| 146 | Supply and laying XLPE insulated, amoured cable, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 4 core and connected all item complete all as specified and directed. |
| 147 | Supply, installation & commissioning MCB Load Distribution board VTPN 4 way double door, for mounting MCCB/DP/ SP/TP/ MCBs as incoming / outgoing, factory made, confirming to IS, fabricated out of CRCA sheet, fitted with DIN channel, neutral link and suitable rated bus bar, DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smooth finish and protection against corrosion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DP/SP/TP MCB shall be of same make as DB. DB shall also be provided with label marking indicating the incoming and outgoing circuits on all way as specified. The DBs shall be of IP 43 - IK 09 with metal door complete all as specified and directed at site. |
| 148 | Supply and fixing 4 Pole MCCB adjustable type 100 Amp, 50 Hz, 415 V with rupturing capacity 36 KA. |
| 149 | Excavation in trenches in soft/lose soil not exceeding 1.5 Mtr wide and not exc 1.5M depth for laying of UG cables and getting out all as specified and directed |
| 150 | Returning, filling, including spreading, levelling, watering and well ramming in layers not exc 25cms thick of soil complete all as specified and directed. |
| 151 | M & L river sand in trenches as cable cushioning 8 cm below the cables and 15cm above the cable which is to be punned down to 10m all as specified and directed.only punned thickness will be measured. |
| 152 | Removing the surplus excavated materisl/soil to a distance not exc 50Mtrs and depositing, where directed at a level not exceeding 1.5 Mtr above the starting point all as specified and directed. |
| 153 | Supply and lay burnt bricks sub class 'B' standard size laid across the cable in trenches as protection to the cable all as specified and directed. |
| 154 | Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers and all directed. |
| 155 | Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of following poles current carrying capacity in the DB complete with connection testing and commissioning( TPN/FP 40 to 100 AMP) And all directed. |
| 156 | Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 26, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysAug 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender