Tender For Special Repairs To 3 Toilet Blocks Of Bldg No P-140 And To Roof Of Bldg No T-1 At Chh Sambhajinagar Cantt Under Ge(S) Ahilyanagar
Tender Value
32.40 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
3 days left
EMD
65000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Aurangabad → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To 3 Toilet Blocks Of Bldg No P-140 And To Roof Of Bldg No T-1 At Chh Sambhajinagar Cantt Under Ge(S) Ahilyanagar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 13-Aug-2026 | BOQ corrigendum | BOQ | 21-Aug-2026 |
| 2 | 13-Aug-2026 | datepostpond | Date | 21-Aug-2026 |
| 3 | 21-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster of any description on brick, block or stone walls etc (at any height) including racking out joints, hacking for key scrubbing down with water etc complete & removing debris outside MD land as directed. |
| 2 | M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick/concrete surfaces finished even & smooth without using extra cement etc complete all as specified and as directed. |
| 3 | M&L for 15mm thick plaster in CM 1:4 (using water proofing liquid as per manufacturers instructions) on other than fair faces of brick work masonary surface or concrete surface finished even and fair without using extra cement complete all as specified and directed. |
| 4 | M&L for rendering 5mm thick in cement mortar (1:3) on concrete surfaces as in ceiling finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 5 | Supply only liquid water proofing compound complete, ISI mark all as specified and as directed. |
| 6 | M&L for brickwork with fly ash bricks, straight or curved on plan, exc 6 m mean radius, built in cement mortar 1:6 with and including demolition of existing brick work built in cement or cement lime mortar of any description complete all as specified and as directed. |
| 7 | M&L for newly plastered wall surfaces, preparation of surface and applying applying two coats of cement base paint of required shade over and including priming coat of alkali resistant primer complete all as specified and as directed. |
| 8 | M&L for preparation of new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed. |
| 9 | M&L for preparation of newly plastered surfaces and applying three coats of white wash on wall complete all as specified and directed. |
| 10 | M&L for applying 1.5 mm thick of Birla/ JK wall care putty in new or old decorated surfaces of walls and sanding the surfaces till smooth finish is obtained for receiving finishes complete all as specified and as directed |
| 11 | M&L for Preparation of old decorated surfaces of walls and applying two coats of white wash complete all as specified . |
| 12 | M&L for Preparation of old decorated surfaces of ceiling and applying two coats of white wash complete all as specified . |
| 13 | M&L for complete removal of existing treatment on old decorated plastered suface of external walls including filling cracks using acrylic wall crack filler & applying two coats of cement base paint of required shade over and including priming coat of alkali resistant primer complete all as specified & directed by Engr in charge. |
| 14 | M&L for preparation of old painted wood or wooden based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint on old complete all as specified and directed. |
| 15 | M&L for preparation of old painted surfaces of steel of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 16 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises all as specified and directed. |
| 17 | M&L for coloured non-skid ceramic tiles, 7 to 8 mm thick (square or rectangular), area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.Note :- Colour and shade shall be approved by Engr-in-Charge. |
| 18 | M&L for glazed coloured ceramic tiles in vertical surfaces as dado of size 450x300x6-7mm, thick set and jointed in neat cement and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:3 on other than fair faces of brick work etc complete all as specified & as directed.Note: Color and design shall be as approved by Engineer-in-charge |
| 19 | Dismantling kota, granite, cudappa stone slabs and interlocking tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortor complete all as specified and as directed. |
| 20 | M&L for machine cut Kota stone flooring 18 to 22 mm thick (minimum size of kota stone slab 18\\"x22\\") laid over and including 20 mm thick bedding layer of cement mortar 1:6, jointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror polishing including removing dust complete all as specified and as directed. |
| 21 | All as per item No. 20.00 here-in-before but 15-18 mm thick as in risers to steps and skirting laid over and including backing coat of 10mm thick cement mortar 1:3 all as specified and as directed.Note : Riser provided to steps shall be in one piece. |
| 22 | M&L 18 to 20mm thick pre-polished granite stone slab of approved shade and colour as in table top, top of WHB, kitchen slab/platform, gate pillars, cills etc or on vertical surfaces including vertical projection, urinal partition, including full round moulding the edge, laid over and including screed bed 20mm thick in cement mortar 1:4 jointing, pointing in white cement 1:2 using marble dust with admixture or pigment to match the shade of granite and rubbing, polishing to achieve mirror finish complete all as specified and as directed.Note: Colour and shade shall be as approved by GE. |
| 23 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 24 | M&L for 75mm thick plain cement concrete 1:4:8 type D-2, using 40 mm graded stone aggregate as in sub base of floors and pavings all as specified and as directed. |
| 25 | M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed. |
| 26 | M&L for PCC 25 mm thick (1:2:4) type B-1 using 20 mm graded stone aggregate as in levelling course in floors, roof complete all as specified & directed. |
| 27 | Dismantling of Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 28 | S&F Pre-painted galvalume aluminum zinc coating Galvanised Iron based corrugated steel sheet 0.5mm thick of an colour, AZ150, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified & directed.Note:- Colour & Pattern to be approved by Engineer-in-Charge. |
| 29 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour, AZ150, having tensile strength of 550 Mpa fixed with self tapping screws as specified & directed. |
| 30 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 31 | Cutting holes into or through brick wall built in cement lime mortar and walls of cement concrete of superficial area exc 150 sqcm but n exc 400 sqcm and making good in CM 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified & directed by Engr-in-Charge. |
| 32 | S&F mild Steel Rolled sections/ hollow tubular sections as in roof trusses (framed), trussed, purlins, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe-410W grade E-250 quality-B with complete all as specified and as directed. |
| 33 | S&F mild Steel Rolled sections/ hollow tubular sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates. Fe 410 -W (Gde- E- 250) quality- A complete all as specified and as directed. |
| 34 | Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, in any position all as specified and directed. |
| 35 | Dismantling of timber scantling in fillets, rails, posts, rafter purlins etc 40Sqcm and over in section in any position all as specified and as directed. |
| 36 | M&L for rolled mild steel sections conforming to Fe-290 (Gde E-165) as in door chowkats/frames, cooler stand and the like including cutting to required length, welding, etc, including preparing back of chowkats and applying two coats of tar and sanding newly tarred surfaces with clean sharp sand complete all as specified & as directed. |
| 37 | Taking down chowkats or frames with shutters (without taking off shutters from the frames), area exc 1.50 sqm but n exc 4 sqm each and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and as directed. |
| 38 | Taking down chowkats or frames with shutters (without taking off shutters from the frames), area n.exc 1.50 sqm each and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and as directed. |
| 39 | Taking down shutters of any description area exc 1 sqm & n.exc 2 sqm each leaf and complete all as specified & as directed. |
| 40 | M & L cement concrete type B-0 1:2:4 (12.5 mm graded agg) as in bed block ,hold fast, coping and similar work etc complete all as specified and as directed. |
| 41 | S&F 35mm thick, factory made flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both faces including teak wood beading 6mm thick all around complete all as specified and as directed. |
| 42 | S&F 35 mm thick, second class hard wood, plain framed, factory made, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and as directed. |
| 43 | S&F 35mm thick IInd class hard wood glazed skelton shutters,factory made,open rebated and prepared to recive glass,guage etc,(with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of sutters as specified in SSR part - I section - 8, clause 8.20 (a). S&F to chowkhat complete all as specified and as directed. |
| 44 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per specified and as directed.Note: (i) Minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable for WPC solid door/window frames. Variation in profile dimensions on plus side shall be acceptable without any extra cost to the department |
| 45 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note: Stainless steel butt hinges shall be paid separately under respective item. |
| 46 | S&F in repair powder coated anodised aluminium ventilator having aluminium section weighing not less than 0.55 kg/m, including aluminium louvers, frosted 3mm thick glass, SS wire mesh, including arrangement for fixing of exhaust fan and necessary joining cleats,glazing clips,screws etc complete all as specified and as directed.Note : Shade shall be as approved by Engineer-in-Charge. |
| 47 | S & F powder coated aluminum windows, three track, made out of aluminium sections including all necessary fittings, 5mm thick sheet glass, rubber/ neoprene beading, locking arrangements all as specified and as directed and comprising of following sections :- (a) Window frame: (i) Bottom-Section 20671 (Wt not less than 0.699 Kg/m) (ii) Top & Side - 20672 (Wt not less than 0.594 Kg/m)(b) Shutter: (i) Vertical (end)- 20669 (Wt not less than 0.548 Kg/m) (ii) Vertical (lock) - 20689 (Wt not less than 0.481 Kg/m) (iii) Bottom - 20718 (Wt not less than 0.263 Kg/m) (iv) Top - 20668 (Wt not less than 0.377 Kg/m)Note : Shade shall be as approved by Engineer-in-Charge. |
| 48 | S&F mild steel framed work such as grill, gratings, guard bars etc with end of bars shouldered and/or riveted or forged into spikes, ladders, iron frame, balusters, railings, cooler stand and similar works conforming to Fe.290, Gde-E-165 including one shop coat of zinc chrome primer and cutting holes/making surface good in cement concrete 1:2:4 type B-0 complete all as specified and as directed. |
| 49 | M&L for preparing the new wooden surface & applying two coats of synthetic enamel paint (1st grade) over one coat of pink primer over 10Cm width or girth complete all as spd & directed. |
| 50 | M&L for preparation of new steel surfaces over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 51 | S&F SS wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed on wooden/steel frames with tinned tacks or galvanized wire staple & complete all as specified and as directed. |
| 52 | S&F in repair SS wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed on wooden/steel frames with tinned tacks or galvanized wire staple & complete all as specified and as directed. |
| 53 | S&F door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor over all length of cover plate 150 mm all as specified and directed. |
| 54 | S&F mild steel helical door spring 300mm ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed by Engr-in-charge. |
| 55 | S&F 100 mm long SS butt hinges, medium weight, cold rolled, ISI marked, complete all as specified and as directed. |
| 56 | Supply & fix 100 mm long mild steel butt hinges, medium weight, cold rolled and fixed with screws/welded complete all as specified and directed. |
| 57 | S&F 125mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and as directed. |
| 58 | S&F 150mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and as directed. |
| 59 | S&F 100mm size stainless steel handles, for cupboard/ kitchen cabinet complete all as specified and as directed. |
| 60 | S&F for aluminum anodized barrel tower bolt of extruded section size of bolt 150mm as specified and directed. |
| 61 | S&F aluminum anodized barrel tower bolt of extruded section size of bolt 200mm as specified and directed. |
| 62 | S&F 200mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 63 | S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 64 | S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 65 | Taking up or down 15 mm bore dia GI steel tubing and connections complete all as specified and as directed. |
| 66 | Taking up or down 20 mm bore dia GI steel tubing and connections complete all as specified and as directed. |
| 67 | M&L for 15mm bore CPVC pipes SDR 11 & Brass CPVC SDR 11 fittings such as socket, elbow, bends, tee, reucer, union, caps plug, nipple etc complete laid in walls/ceilings or laying in floor trench or fixed to walls complete all as specified and as directed |
| 68 | M&L for 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings such as socket, elbow, bends, tee, reucer, union, caps plug, nipple etc complete laid in walls/ceilings or laying in floor trench or fixed to walls complete all as specified and as directed |
| 69 | M&L for cutting chases in walls for pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth all as specified and as directed. |
| 70 | S&F in repairs vitreous china counter sunk wash hand basin, oval shape (approx. 520mm x450mmx 190mm size) including 32 mm dia waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe,15mm dia PVC connection pipe 450mm long complete all as specified and as directed. Make: Cat No. S2030101 of CERA or equivalent model of makes specified.Note: Cat No S2030101 or S2030104 of CERA or equivalent model of makes Specified. |
| 71 | S&F in repairs vitreous China bowl urinal flat back, white, with grating and union for discharge pipe (excluding flushing cistern, flush pipe) 40mm PVC waste pipe & 40 mm waste coupling providing and fixing plugs, bedding urinal against wall in mortar 1:2, securing urinal to plug, with and including 60mm long screws, pointing around urinal back in cement, fixing flush pipe, complete all as specified and as directed.Note: Cat No. S4020103 of CERA or equivalent model of makes specified. |
| 72 | S&F in repair Vitreous China, Squatting pan Orissa pattern size 580 x 440mm, white with integral foot rests (excluding flushing cistern and flush pipe) with Vitreous China ‘P’ or ‘S’ trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe, including PCC (1:2:4) type B-1 for fixing of WC and making good the floor to match the existing complete all as specified and as directed.Make: Cat No. S3010102 of CERA or equivalent model of makes specified |
| 73 | S&F in repair vitreous china wash down water closet pan (pedestal pattern), white, including plastic white seat cover closed pattern with flat bottom and mild steel chromium plated hinge device including connections to drain (or outgoing pipe ) and to flushing pipe anti syphonage pipe etc complete all as specified and as directedNote: Cat No S1053102 of CERA or equivalent model of makes Specified. |
| 74 | S&F in repair PVC valveless syphonic action type low level flushing cistern, 10 Ltrs capacity White, with inlet ball valve, float, handle with 32mm PVC flush pipe, fixed on walls by driling holes and using PVC rawl plug of suitable size complete all as specified and directed.Note: Cat No B1010110 of CERA or equivalent model of makes Specified. |
| 75 | S&F in repair PVC connection, 15 mm size with PTMT nuts, 450 mm long complete all as specified and directed. |
| 76 | S&F SS Grating with square frame (Grating thk- 1mm & frame thk- 1.5mm) of size 125mm (minimum) with/without waste-hole complete all as specified and directed. Note: Design of grating to be approved by Engineer-in-Charge. |
| 77 | S&F SS Grating with square frame (Grating thk- 1mm & frame thk- 1.5mm) of size 100mm (minimum) with/without waste-hole complete all as specified and directed. Note: Design of grating to be approved by Engineer-in-Charge. |
| 78 | S&F in repair Soap dish, chromium plated, fixed to plugs with chromium plated brass screws embedded in the wall complete all as sped & directed. |
| 79 | S&F in repairs,Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.Make :- Cat No F8030111AB of Cera or equivalent model of makes specified. |
| 80 | S&F in repair 15mm bore wall mixer for mixing hot & cold water and bend to connections to shower, 15mm bore screwed for iron pipe and fixed complete all as specified and directed.Make :- Cat No F1015401 of Cera or equivalent model of makes specified. |
| 81 | S&F in repairs, 15 mm bore pillar taps, Swan neck type, cast copper alloy with capstan heads, fancy type, with aerator, chromium plated screwed down high pressure for iron pipe and fixed complete all as specified and as directed.Make: Cat No. F1015301 of CERA or equivalent model of makes specified. |
| 82 | S&F in repair over head shower roses 125mm size with 200mm long shower arm and wall flange all as specified and directed by Engr-in-charge.Make :- Cat No F7020111AB of Cera or equivalent model of makes specified. |
| 83 | S&F in repairs, angle/ stop cock 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.Make:- Cat No F1015201 of Cera or equivalent model of makes specified. |
| 84 | S&F in repairs, bib tap 15mm dia, with wall flange and areator screws down for iron pipe or for iron pipe or for brass ferrule complete all as specified and as directed.Make :- Cat No F1015151 of Cera or equivalent model of makes specified. |
| 85 | S&F in repairs, two way bib tap 15mm dia, with wall flange and aerator screwed down for iron pipe or for brass ferrule complete all as specified and as directed.Make: Cat No. F1015161 of CERA or equivalent model of makes specified. |
| 86 | S&F in repairs towel rail 60 cm long between flanges complete all as specified and as directed.Make: Cat No. F5015103CH of CERA or equivalent model of makes specified. |
| 87 | S&F in repair sheet glass assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets guard and railing 60cm long complete all as specified and directed by Engr-in-Charge |
| 88 | S&F in repair bevelled edge looking mirror 5.5mm thick mirror of selceted glass mounted on BWP commercial plywood 6 mm thick including PVC beading all round and fixed to wooden plugs with chromium plated screws complete all as specified and directed by Engr-in-charge.Note: Size as decided by Engineer-in-Charge |
| 89 | S&F in repairs, rotational moulded polyethylene water storage tanks colour white (cylindrical vertical with closed top), 1000 litres capacity, tripple layered, hoisted and fixed in position including 20 mm dia float valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting all as specified and as directed. |
| 90 | S&F in repairs 75 mm dia PVC(SWR) nahani/ floor trap with grating including jointing to waste pipe with solvent cement complete all as specified and as directed. |
| 91 | S&F for providing Cupboard/kitchen cabinet with shutters in required size at site made out of 18 mm thick solid PVC board one side laminated and other side plain. The panels shall be fabricated using adhesive, screwed and secure as required. All edges shall be covered with 1.5mm thick edges leaping tapes or 90 degree edge bent finish as per manufactures instructions complete all as specifed and directed. |
| 92 | S&F for providing Cupboard/kitchen cabinet Shelf in required size at site made out of 18 mm thick solid PVC board both sides plain. The panels shall be fabricated using adhesive, screwed and secure as required. All edges shall be covered with 1.5mm thick edges leaping tapes or 90 degree edge bent finish as per manufactures instructions complete all as specifed and directed. |
| 93 | S&F 100mm size hasp and staple, aluminium anodised safety type, fixed with screws complete all as specified and directed |
| 94 | S&F in repair magnetic catcher, Double strip (horizontal type), in cupboard/ward robe shutters including fixing wit necessary Stainless Steel screws etc. complete all as specified and as directed. |
| 95 | S&F in repair for 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed. |
| 96 | S&F in repair for 110 mm bore PVC (SWR) pipes single socketed with rubber ring joints, laid in trenches or in floors complete all as specified & directed. |
| 97 | S&F in repair for 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed. |
| 98 | S&F in repair for 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed. |
| 99 | S&F in repairs, 110 mm dia PVC (SWR) bends with oval access door of any radius complete all as specified and as directed. |
| 100 | S&F in repairs, 75 mm dia PVC (SWR) bends with oval access door of any radius complete all as specified and as directed. |
| 101 | S&F in repair for 75 mm bore PVC (SWR) junction single, (Single Y) equal or unequal complete all as specified & directed. |
| 102 | S&F in repair for 110 mm bore PVC (SWR) junction single, (Single Y) equal or unequal complete all as specified & directed. |
| 103 | S&F in repair for 75 mm bore PVC (SWR) junction double, (double Y) equal or unequal complete all as specified & directed. |
| 104 | S&F in repair for 110 mm bore PVC (SWR) junction double, (double Y) equal or unequal complete all as specified & directed. |
| 105 | S&F in repair for 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified & directed. |
| 106 | S&F in repair for 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified & directed. |
| 107 | S&F for 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 108 | S&F for 110 mm bore PVC (SWR) reducer complete all as specified and directed. |
| 109 | S&F stack clamp made out of 50 x 3mm flat iron and 16 mm dia round iron stays fixed to wall for pipe of bore 110mm complete all as specified. |
| 110 | M&L for 15mm thick plaster in CM 1:4 (using water proofing liquid as per manufacturers instructions) on concrete surfaces of sunken portion. The corners of sunken portion shall be rounded in concave shape and adequate slope shall be made during plastering to accommodate the pipe and curing of sunken portion shall be carried out with water for a minimum of 48 Hrs by ponding complete all as specified and directed.Note : Water proofing liquid shall be paid separately. |
| 111 | M&L for Brushing cement slurry @ of 1.2 Kg of cement per square metre duly blended with & including water proofing compound complete all as specified and directed. |
| 112 | S&F APP polymer modified prefabricated membrane using Butane torch by torch application with 100mm side laps APP membrane shall be of minimum weight not less than 3.6 Kg/Sqm and minimum 3mm thick five layered reinforced with non woven polyester fabric (weight not less than 150 gm/sqm) over a coat of bitumen primer @ 0.40 liter/sqm on prepared surface complete all as specified and directed. |
| 113 | M&L for PCC (type F-2) 1:7:12 for filling of sunken portion after concealing all membrane and sealing all joints complete all as specified and directed. |
| 114 | M & L for providing hole in the wall and fixing 600 mm long, 20mm dia GI spouts light grade including packing and filling holes around pipes with PCC 1:3:6 type C0 (using 12.5mm graded stone aggregate) complete to the satisfaction of Engineer-in-Charge. |
| 115 | Hacking out of old broken glass (any thickness ,size quality or description/ any height of bldg) from wooden / metal frames including punching or drilling out old glazing pins/spring clips complete all as specified and as directed. |
| 116 | S&F 3mm thick frosted/figured sheet glass ordinary quality and glazing with oil putty or beads in square n.exc 0.50 sqm in each pane, of any description complete all as specified and as directed. |
| 117 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for ( reinforcement cut as required to facilitate demolition) complete all as specified and as directed. |
| 118 | M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar works flat n exc 200mm thick (Horizontal or slopping) for fair finished surfaces complete all as specified and as directed. |
| 119 | M&L for form work to edges of concrete flats, treads floor and roofs n exc 20 cm wide and sides of RCC/PCC bends in walls (horizontal or slopping) and similar works exc 10 cm but n exc 20 cm wide for fair finished surfaces complete all as specified and directed. |
| 120 | M&L for mild steel TMT bars, 8mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 121 | M&L for mild steel TMT bars 5mm and over upto and including 10mm dia, cut to length, bent to shape required, including crankng as in stirrups with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and as directed. |
| 122 | M & L for RCC 1:2:4 (Nominal Mix), type B-1, using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and shelves and the like etc .complete all as specified and as directed. |
| 123 | M&L for 40 mm thick, cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregates) as in path/hard standing and flooring, laid in alternate bays, finished even & smooth without using extra cement including necessary formwork complete all as specified and as directed. |
| 124 | M&L for PCC (1:3:6) type C-1 using 20mm graded stone agg as in coping, on top of wall, bed blocks for hold fast, lintel band upto 1.5 mtr span and the like including weathering, slightly rounded or chamfered angles and throating as directed by Engr-in-Charge including use of necessary form work. |
| 125 | M&L for 100 mm thick, cement concrete 1:2:4, type B2 (using 40 mm graded stone aggregates) as in path/hard standing and flooring, laid in alternate bays, finished even & smooth without using extra cement including necessary formwork complete all as specified and as directed. |
| 126 | Excavation in trenches not exc 1.50m wide and not exc 1.50m deep for foundation etc . or laying of pipes, cables or shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and as directed |
| 127 | Removing excavated soil to distance exc 250m but n.exc 500 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed. |
| 128 | M&L Returning, refilling in trenches, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed. |
| 129 | M&L for supply, laying, jointing and testing of RCC pipes, 150 mm bore dia, class NP2, laid in trenches and jointed with collars in cement mortar 1:1, including demolition of PCC in bedding/haunching with taking down of old RCC /SGSW pipes of 150mm dia and removal of debris out from defence land complete all as specified and as directed. Note:- (a) Excavation, earthwork and PCC bed concrete shall be measured and paid for seperately under respective item. |
| 130 | M&L for PCC 1:4:8, type D-2, using 40 mm graded stone aggregates as in concrete bed for 150 mm bore dia drain pipes, any type, including packing under and haunching against the sides of the pipes after they are laid & tested complete all as specified and as directed. |
| 131 | Taking down carefully copper/Aluminum point wiring (Light, Fan, Socket or power) complete fitting such as switches, ceiling, regulator, sockets etc removing materials to be store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors etc and matching with existing surface complete all as specified and as directed. |
| 132 | M & L point wiring with two runs of 1.5 sqmm for phase and neutral, single core, multistranded copper conductor cable of 1100 Volts grade,conforming to IS-694 1990, PVC insulated and unsheathed , FRLS(H) cable drawn through and including heavy grade PVC rigid conduit not less than 20 mm dia as reqd at site, totally concealed in walls/floors/ceiling including all conduit accessories/ fittings/ junction boxes/ inspection covers etc; of heavy grade, ISI marked and sunken terminal boxes of factory made 16 SWG pressed steel housing, totally concealed in walls and including factory made terminal boxes with modular cover plates and frames fixed flush with wall surface by means of brass screws and sunk/cup washers, for mounting of switches, sockets fan regulates etc; including 1.5 Sqmm 1100 V grade PVC insulated, unsheathed flexible multi stranded copper conductor FRLS(H) cable as continuous earth wire connected to metallic bodies of luminaries/fans etc; at one end and to common earth dolly at other end, all as specified & directed for light point or one fan point controlled by one, one way switch NOTES: (a) Proper colour coding shall be adopted for wiring (for phase-RED,YELLOW, BLUE for Earth-Green and Neutral-Black) (b) All points shall be earthed up to fittings.(c) The unit rate quoted shall deeemed to be included cutting chases in walls for concealed wiring & making good disturbed surfaces . |
| 133 | All as per serial item No 132.00 but with 2.5 Sqmm cables for one 16A, 6-Pin (multipurpose) socket outlet point on independent board with & including 2.5 Sqmm FRLS (H) cable as earth wire complete all as specified and as directed. |
| 134 | All as per serial item No 132.00 but for one 3 pin 6 Amp Socket outlet point on same board with other switches including earth wire as per description given above and connected to common earth and earth terminals. |
| 135 | All as per serial item No 132.00 but for one 3 pin 6 Amp Socket outlet point on independent board including earth wire as per description given above and connected to common earth and earth terminals. |
| 136 | All as per serial item No 132.00 but with 4.0 Sqmm cables for one geyser point on independent board & including 4 Sqmm FRLS (H) cable as earth wire complete all as specified and as directed. |
| 137 | M&L for point wiring with two runs of 1.5 sqmm for phase and neutral, single core, multistranded copper conductor cable of 1100 Volts grade,conforming to IS-694 1990, PVC insulated and unsheathed , FRLS(H) cable drawn through and including PVC casing caping (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. alongwith 1.5 Sqmm copper conductor cable (multistranded) PVC insulated and unsheathed FRLS(H) cable as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC boards/bakelite sheets / and including factory made terminal boxes with modular cover plates and frames suitable for mounting switches, sockets, fan Regulators, accessories etc as specified and as directed for one light point or one fan point controlled by one, one way switchNOTES: (a) Proper colour coding shall be adopted for wiring (for phase-RED,YELLOW, BLUE for Earth-Green and Neutral-Black) (b) All points shall be earthed up to fixtures i.e holders, tube lights, all lights, ceiling lights, bulkhead lights, bldg security lights etc. |
| 138 | All as per serial item No 137.00 but for one 3 pin 6 Amp Socket outlet point on same board with other switches including earth wire as per description given above and connected to common earth and earth terminals. |
| 139 | All as per serial item No 137.00 but for one 3 pin 6 Amp Socket outlet point on independent board including earth wire as per description given above and connected to common earth and earth terminals. |
| 140 | All as per serial item No 137.00 but with 2.5 Sqmm cables for one 16A, 6-Pin (multipurpose) socket outlet point on independent board with & including 2.5 Sqmm FRLS (H) cable as earth wire complete all as specified and as directed. |
| 141 | S&F Modular switch single pole one way 6/10 Amps 1 module complete all as specified and as directed. |
| 142 | S&F Modular switch single pole one way 16 Amps 1 module complete all as specified and directed. |
| 143 | S&F Modular socket 6 Amp-2/3 pin combined 2 module complete all as specified and as directed. |
| 144 | S&F Modular socket 6 A/16 Amp -2/3 pin combined 2 module complete all as specified and as directed. |
| 145 | S&F Modular fan regulator Step Type, 120W-2 Module Complete all as specified and as directed. |
| 146 | S&F in replacement decorative ultra slim batten square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient of capacity 20 Watt , 6500 K with inbuilt driver complete fitting and all other accessories fitting arrangements including connecting up with two core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.Make : Cat No.LHEXAWP7UN1W020 of Havells or Cat No. R20PBE Bajaj beam pro of Bajaj or equivalent of makes specified in PS |
| 147 | S&F in replacement decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient of capacity 10 Watt , 6500 K with inbuilt driver complete fitting and all other accessories fitting arrangements including connecting up with two core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.Make : Cat No.LHEXAZP7PN1W010 of Havells or equivalent of makes specified in PS |
| 148 | S&F in replacement lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. |
| 149 | S&F in replacement ceiling rose surface bakelite three terminal type complete all as specified and as directed. |
| 150 | S&F in repairs, MCB DB, double door type (when MCBs are to be used), single pole and neutral, 240 volts, 8 way, protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming as per IEC 61439-3, suitable for flush mounting and surface mounting, with 100 Amps rated copper busbar, with Neutral bar, Earthbar and cable alley for cable managment, fully shrouded, Neutral bars, prefittes masking sheet complete all as specified and as directed. |
| 151 | S&F in replacement single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amp 240 Volts complete all as specified and as directed. |
| 152 | S&F in replacement of MCB SP, C Curve, 6 to 32 Amps 10 KA single pole AC 230 volts complete all as specified and as directed. |
| 153 | S&F in replacement of MCB SPN, C Curve, 40-63 Amps 10 KA single pole AC 230 volts complete all as specified and as directed. |
| 154 | Supply & fix Emergency/Inverter lamp in replacement of old Bulb any type with Emergency Back up up to 3-4 Hrs High grade thermal plastic housing with Al Heat sink for better thermal management , 100 lumen/watt PF>0.90 operating voltage 100 to 300 V Eco friendly (No Mercury) CCT 6500 of capacity 12 watt complete all as specified and directed.Make : Cat No.LED 12 W B22 CDL INVERTER BULB V2 of Havells or equivalent of makes specified in PS |
| 155 | S&F in replacement Emergency / Inverter LED batten 20W 6500K with square profile and polycarbonate channel, lithium-Ion battery with charging time 8hours-10 hours, back up time up to 4 hours and surge protection up to 4KV including connecting up with suitable flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.Make : Cat No. LHEXACP7FN1W020 Pride Plus Inverter Batten 20W 6500 KV1 of Havells or equivalent of makes specified in PS |
| 156 | M&L for sub main wiring with 2 runs of 6 sqmm, single core, PVC insulated & unsheathed FRLSH cable conforming to IS-694, 1100 volts with copper conductor, multi stranded drawndrawn through concealed conduit and including PVC conduit heavy grade alongwith one run of 6 sqmm single core PVC insulated & unsheathed FRLSH copper conductor as continuos earth wire and connecting to common earth terminals and testing on completion including taking down old submain wiring and casing caping complete all as specified and as directed.NOTES: (a) Proper colour coding shall adopted for wiring (for phase-RED, YELLOW, BLUE for Earth- Green and Neutral-Black) (b) Three runs of 6 sq.mm cable and one run of PVC conduit shall be measured as one unit |
| 157 | M&L for sub main wiring with 2 runs of 6.0 sqmm, single core, PVC insulated & unsheathed FRLS cable conforming to IS-694, 1100 volts with copper conductor, multi stranded drawn in and including suitable size heavy grade casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6.0 sqmm single core PVC insulated & unsheathed FRLS copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduit complete all as specified and as directed.NOTES: (a) Proper colour coding shall adopted for wiring (for phase-RED, YELLOW, BLUE for Earth- Green and Neutral-Black) (b) Three runs of 6.0 sq.mm cable and one run of PVC casing & caping shall be measured as one unit. |
| 158 | M & L for Taking down carefully water Geyser 25 ltrs capacity by unscrewing nuts bolts, water inlet/outlet pipes from walls/foundation complete including refixing in position after carrying repairs like change of suitable geyser element, themostat, inlet outlet pipes,16 Amp plug top, replacement of burnt wire, safety valve, non return valve, inner and outer tank, sloving geyser leakage problems etc. including making connection to the water inlet, outlet pipe, electric connection and testing complete all as specified and directed by Engineer-in-charge. |
| 159 | S&F in replacement 35 Watt building mounted LED security light fitting complete made up of pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07 & 10KV external SPD, including GI bracket made out of GI pipe 40/50 mm bore, medium grade pipe 1.2m long bend to shape required fixed to pole / wall with 02 Nos MS clamps made out of flat iron 40x5 mm including nuts, bolts and washer, painting with two coats aluminium paint over a coat of primer, suitable for LED fitting complete all as specified and as directed.Make : Havells Cat Part No ENDURASUNDOWNSL35WLED765PASYBOPC or equivalent model of makes specified. |
| 160 | Supply and fix in replacement PVC Plastic body Exhaust fan of size 300 mm sweep with louvers complete including PCC and Plywood packing work/ alterations to existing window/ wall to make arrangument as per site reqmt complete all as specified and directed.Note : Old exhaust fan shall be deposited to AGE E/M office. |
| 161 | S&F in replecement 1100 Volt grade, heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and over all pvc sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4 mm suspension wire one twin core cable flat of stranded multistranded conductor of size 10 sqmm complete all as specified and as directed. |
| 162 | M&L in repairs/replacement earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level, connecting to the GI wire 4 mm dia, by means of nut bolts, check nuts and washer and the GI Earth wire connected upto main earth point/DBs alongwith 15mm dia GI medium grade protection pipe including provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick RCC (1:2:4) cover with reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade |
| 163 | 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified including testing on completion. Note : Rate of GI earthwire and GI protection pipe upto 7.5 mtr length shall be deemed to be included in this item Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 21, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 21, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 28, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender