Tender For Addition/ Alteration And Improvement To Bldg P-239 At Hqtc Banglaore
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Aug 2026
5 days left
EMD
87340
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/ Alteration And Improvement To Bldg P-239 At Hqtc Banglaore
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GARRISON ENGINEER (AF) BANGALORE NAME OF WORK : ADDN/ ALTN AND IMPROVEMENT TO BLDG P-239 AT HQTC BANGLAORE CA NO: GE(AF)/B/ OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item of Work Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT (in Words) |
| 2 | Taking down of chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from the frames) and set aside or removing from site complete all as specified and as directed by Engr-in-charge. |
| 3 | Taking down of chowkats or frames exc 1.5 sqm but not exc 4 sqm each (without taking off shutters from the frames) and set aside or removing from site complete all as specified and as directed by Engr-in-charge. |
| 4 | Taking down shutters of any description exc 1 sqm but not exc 2 sqm each complete all as specified and as directed by Engr-in-charge. |
| 5 | Taking down shutters of any description exc 1 sqm but not exc 2 sqm each and refixing in same opening after easing and adjusting complete all as specified and as directed by Engr-in-charge. |
| 6 | Supply and fix for 2nd class HW plain chowkhats and framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed by Engr-in-charge. |
| 7 | Supply and fix for 35mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engr-in-charge. |
| 8 | Supply and fix for 35mm thick factory made 2nd class hard wood glazed and skeleton shutter open rebated and prepare to receive glass, gauge etc., (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc, size of members of shutters complete all as specified and as directed by Engr-in-charge. |
| 9 | Supply and fix for factory made solid PVC moulded door shutter, with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded prelaminated PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site complete all as specified and as directed by Engr-in-charge. |
| 10 | Supply and fix for solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening complete all as specified and as directed by Engr-in-charge. |
| 11 | Supply and fix for pressed steel frames size 125x60mm for doors with one or more rebates including necessary fixing lugs,125mm mild steel butt hinges, medium weight, lock strike plate, etc., complete all as specified and as directed by Engr-in-charge. |
| 12 | Supply and fix for pressed steel frames size 105x60mm for doors with one or more rebates including necessary fixing lugs, 125mm mild steel butt hinges, medium weight, lock strike plate, etc., complete all as specified and as directed by Engr-in-charge. |
| 13 | Supply and fix for powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed by Engr-in-charge. |
| 14 | Supply and fix for powder coated (minimum thickness of powder coating 50 micron) anodised aluminium sliding window and ventilator shutters, aluminium sections weighing not less then 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and as directed by Engr-in-charge.Note: Sheet glass and SS wiremesh shall be measured and paid separately. |
| 15 | Supply and fix for powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less then 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and as directed by Engr-in-charge.Note: Sheet glass and SS wiremesh shall be measured and paid separately. |
| 16 | Supply and fix for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including beads complete all as specified and as directed by Engr-in-charge. |
| 17 | Supply and fix for 4.8mm thick sheet glass ordinary quantity and glazing with oil putty in squares not exc 0.50 sqm in each pane complete all as specified and as directed by Engr-in-charge. |
| 18 | Material and labour for framed work such as grills, gratings, etc., with ends of bars shouldered and /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed by Engr-in-charge. |
| 19 | Material and labour for along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 ltrs per linear metre incl drilling and plugging holes etc., in apron complete all as specified and as directed by Engr-in-charge. |
| 20 | Material and labour for treatment of soil under existing floors using emulsion @ 1 ltrs per hole 300mm apart incl drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 sand) to match the existing floors complete all as specified and as directed by Engr-in-charge. |
| 21 | Supply and fix in repairs 18mm thick veneered decorative plywood, grade 1 (with BWR resin), with decorative face veneers on both faces fixed with screws to timber frame work for built in cupboards, shelves, almirahs etc., complete all as specified and as directed by Engr-in-charge. |
| 22 | Supply and fix in repairs brass Godrej mortice lock, vertical type, size 100mm 4 levers include for escutcheon plates and two keys complete all as specified and as directed by Engr-in-charge. |
| 23 | Supply and fix for 75mm long mortice latch with two levers (vertical type), brass body and fixed complete all as specified and as directed by Engr-in-charge. |
| 24 | Supply and fix for stainless steel clip on auto closing panel concealed hinges thickness 15-22mm for full overlay door 0 degree crank for cupboard door complete all as specified and as directed by Engr-in-charge. |
| 25 | Supply and fix for 30mm width of flaps (when open) continuous (piano) hinges, mild steel, bright finish or electro galvasised complete all as specified and as directed by Engr-in-charge. |
| 26 | Supply and fix for magnetic catch complete all as specified and as directed by Engr-in-charge. |
| 27 | Supply and fix for 100mm mild steel butt hinges, medium weight, cold rolled complete all as specified and as directed by Engr-in-charge. |
| 28 | Supply and fix for 100mm long extruded brass handles, fabricated type polished complete all as specified and as directed by Engr-in-charge. |
| 29 | Supply and fix for 150mm aluminium anodised barrel tower bolts of stove enameled black, with bright bolt and fixed complete all as specified and as directed by Engr-in-charge. |
| 30 | Supply and fix for 200mm aluminium anodised barrel tower bolts of stove enameled black, with bright bolt and fixed complete all as specified and as directed by Engr-in-charge. |
| 31 | Supply and fix for 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed by Engr-in-charge. |
| 32 | Supply and fix for 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engr-in-charge. |
| 33 | Supply and fix for 300mm size mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engr-in-charge. |
| 34 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., disposal of unserviceable materials, debris and rubbish complete all as specified and as directed by Engr-in-charge. |
| 35 | Material and labour for precast cement concrete block masonry with solid blocks type C1, 1:3:6 (Using 20mm graded stone aggregate) exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed by Engr-in-charge. |
| 36 | Material and labour for providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) type C1, 1:3:6 (Using 20mm graded stone aggregate) and setting in cement mortar 1:6 in walls complete all as specified and as directed by Engr-in-charge. |
| 37 | Supply and fix in repairs fancy type stainless steel curtain rod 25mm dia with suitable SS brackets with suitable wooden round base and fency type end top matching to curtain rod complete all as specified and as directed by Engr-in-charge.Note: Additional supporting bracket shall be provided if length is exceeding 1.2m and rate quoted shall include for the same. |
| 38 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed by Engr-in-charge. |
| 39 | Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound wherever required complete all as specified and as directed by Engr-in-charge.Note: WPC shall be measured and paid separately. |
| 40 | Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 41 | Material and labour for rendering 10mm thick on fair faces of concrete surfaces in cement mortar 1:3 in ceiling of chajja, roof projection, shelve etc., and finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 42 | Supply only liquid water proofing compound complete all as specified and as directed by Engr-in-charge. |
| 43 | Dismantling structural steel work including doors, gates and similar works but excluding framed truss etc., complete all as specified and as directed by Engr-in-charge. |
| 44 | Supply and fix for mild steel trussed, purlins, fencing posts, crane gantries rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) conforming to Fe-410- W (GdeE-250) qualiy 'A' including distance pieces, cleats, nuts and bolts any size and length etc., complete all as specified and as directed by Engr-in-charge. |
| 45 | Supply and fix for mild steel flats 40x6mm thick for hand rails, wind ties, posts and struts in fencing screwed or welded to shape as directed, including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe 410-O or Fe 310-O complete all as specified and as directed by Engr-in-charge. |
| 46 | Material and labour for plain cement concrete type B0, 1:2:4 (Using 12.5mm graded stone aggregate) cast in situ in cills and other similar bands, plinth courses, parapets, copings, hold fast, bed plates, filling hollow section of pressed steel frame and the like including use and waste of form work, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed by Engr-in-charge. |
| 47 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, includingnainital or similar pattern roof coverings complete all as specified and as directed by Engr-in-charge. |
| 48 | Supply and fix for prepainted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws/ J hooks and bolts complete all as specified and as directed by Engr-in-charge. |
| 49 | Supply and fix for prepainted galvalume aluminium zinc coating GI based plain steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws/ J hooks and bolts complete all as specified and as directed by Engr-in-charge. |
| 50 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-charge. |
| 51 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and as directed by Engr-in-charge. |
| 52 | Sunken WaterproofingSurface Preparation: Taking out/ down old existing sunken slab treatment and cleaning the old RCC surfaces of sunken /lowered portion of slab surface for full depth of sunken floor by wire brush or chisel out any mortar sticking the surface all as specified and directed including cleaning and preparation of the substrate to receive Fosroc Polyurea water proofing system shall be a sound base free from any oil, grease, rust, or deleterious material which may impair adhesion. The surface preparation shall be carried out mechanically to remove contaminants, laitance and weak concrete, to expose blow holes, and to produce a sound concrete with adequate profile and porosity. Any crack shall be treated with cementitious repair mortar of Fosroc Renderoc CS or epoxy crack filling mortar or equivalent product by proper grooving arrangement complete all as specified and as directed by Engr-in-charge. |
| 53 | Bore Packing (for Reinstallation): Preparing the inside surface of core and PVC by roughening using suitable file to get better adhesion prior to packing works. Cleaning the surface by wire brushing followed water jet to remove any laitance or loose flaky particles. Providing necessary formwork for packing the bore using suitable arrangement (depending upon site conditions). Applying a coat of styrenebutadiene based polymer coating using Nitobond SBR or equivalent product of Asian paints, M/S MC Bauchemic /CIPY/SIKA/Pidilite Dr Fixit/ Thermax/ STP admixed with integral WPC or cementitious crystalline waterproofing compound to enhance adhesion between the packing material and other surfaces. Packing the gap using nonshrink cement polymer-based grout using conbextra GP2 upto the surface of the bore whilst the Nitobond SBR is in tacky state. The above analysis is based on assumption for 150mm diameter core with 110mm diameter PVC for 5” thick slab only. Typical Properties Compressive strength at 28 days as per BS 1881 45N/mm2 complete all as specified and as directed by Engr-in-charge. |
| 54 | Coving treatment:Making coving of 50x50mm at all the flat and vertical junction using Fosroc Renderoc S Single component, shrinkage compensated, fiber reinforced, thixotropic cementitious mortar, to achieves a minimum compressive strength of 20 MPa in 1day and 55 MPa in 28 days when tested as per EN 12190 and capable of applying 50mm thickness in single layer of approved product finished flush with existing surface complete all as specified and as directed by Engr-in-charge. |
| 55 | Waterproofing membrane:Supply and application of single-component, Pitch free seamless roller/ spray applied Nitoproof 600PF or equivalent product of Asian paints, M/S MC Bauchemic /CIPY/SIKA/Pidilite Dr Fixit/ Thermax/ STP applied at average minimum DFT of 1.3mm above primed surface with Nitoproof WB Primer or equivalent product of Asian paints, M/S MC Bauchemic /CIPY/SIKA/Pidilite Dr Fixit/ Thermax/ STP It shall possess the following properties: Solids by Volume: 85%, Tensile Strength ASTM D412: >1.9 MPa,Tear resistance ASTM D624C: 15(N/mm), Elongation ASTM D-412: >400%, Adhesion in-peel test ASTM C836 (N): > 50N complete all as specified and as directed by Engr-in-charge.Notes: (i) Providing a non-woven geotextile fabric of 200GSM over the cured waterproofing membrane before going for a protective layer.(ii) Fill the sunken with water and check for dampness and seepage. All pipes passing through walls of sunken floor shall be laid before water proofing treatment is carried out . One No 50mm dia, 35mm long medium grade GI pipe with wire gauge on inside mouth shall be provided to each sunken portion. Cost of pipe with including of quoted rate, no extra cost will paid.(iii) The work shall be carried out complete as per manufacture's specifications and application methodology. Execution to be done with authorized trained /skilled applicator with prior experience of more than 5 years in applying similar system and as per manufacturer technical guidelines laid by manufacturer. |
| 56 | Material and labour for PCC type D2 ,1:4:8 (Using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed by Engr-in-charge. |
| 57 | Material and labour for 40mm thick PCC 1:2:4, type B0 (Using 12.5mm graded stone aggregate) as in flooring complete all as specified and as directed by Engr-in-charge. |
| 58 | Material and labour for 25mm thick PCC 1:2:4, type B0 (Using 12.5mm graded stone aggregate) as in flooring, rough finish surfaces for receving top layer complete all as specified and as directed by Engr-in-charge. |
| 59 | Material and labour for 75mm thick PCC 1:2:4 type B1 (Using 20mm graded stone aggregate) for hard standing including finishing the surface even and fair complete all as specified and as directed by Engr-in-charge. |
| 60 | Material and labour for PCC type C2 ,1:3:6 (Using 40mm graded stone aggregate) as in surface channels and drain complete all as specified and as directed by Engr-in-charge. |
| 61 | Material and labour for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile 400x400mm of size, in floors etc., set and jointed in neat cement slurry over and including 15mm thick screed bed of cement mortar 1:6 and pointed with white or coloured cement to match complete all as specified and as directed by Engr-in-charge. |
| 62 | Material and labour for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile of size on vertical surfaces for skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in cement mortar 1:4 for backing of tiles complete all as specified and as directed by Engr-in-charge. |
| 63 | Material and labour for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile 300x300mm, in floors etc., set and jointed in neat cement slurry over and including 15mm thick screed bed of cement mortar 1:6 and pointed with white or coloured cement to match complete all as specified and as directed by Engr-in-charge. |
| 64 | Material and labour for coloured glazed ceramic design tiles 450x300x7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed by Engr-in-charge. |
| 65 | Material and labour for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) including finishing the surface even and fair complete all as specified and directed. |
| 66 | Material and labour for coloured designed chequered cement concrete tiles of a size 300x300x25mm thick with white cement and pigment in floors with 15mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engr-in-charge. |
| 67 | Material and labour for machine pressed precast conctete glossy finish interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade and pointed with grey cement mixed with pigment to match complete all as specified and as directed by Engr-in-charge. |
| 68 | Material and labour for hardcore of gauge not exc 63mm of broken stone, deposited, spread and leveled in layers not exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by Engr-in-charge. |
| 69 | Material and labour for sand cushioning including watering for Interlocking tiles complete all as specified and as directed by Engr-in-charge. |
| 70 | Material and labour for forming contraction (dummy) joints 75mm deep x 10mm wide, filled with sealing compound, grade 'A' complete all as specified and as directed by Engr-in-charge. |
| 71 | Material and labour for granite (of any type) tiles 18-20mm thick work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite and 20mm thick screed bed of cement mortar 1:6 complete all as specified and as directed by Engr-in-charge. |
| 72 | All as per item No.70 here-in-before but vertical surfaces with 10mm thick rendering of cement mortar 1:4 complete all as specified and as directed by Engr-in-charge. |
| 73 | Material and labour for preparing new plastered surfaces and applying three coats of white wash on surfaces of ceilings complete all as specified and as directed by Engr-in-charge. |
| 74 | Material and labour for preparing old plastered surfaces and applying two coats of white wash on surfaces of ceilings complete all as specified and as directed by Engr-in-charge. |
| 75 | Material and labour for preparing new plastered surfaces and applying through mechanical means two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls complete all as specified and as directed by Engr-in-charge. |
| 76 | Material and labour for preparing old plastered surfaces and applying one coat of cement base paint through mechanical means complete all as specified and as directed by Engr-in-charge. |
| 77 | Material and labour for preparing new plastered surfaces of walls and applying through mechanical means two coats of oil bound distemper over a coat of alkali resistant primer over and including applying 2mm thickness plaster of paris putty to prepare the surface even and smooth complete all as specified and as directed by Engr-in-charge. |
| 78 | Material and labour for complete removal of existing treatment of old plastered surfaces of walls and applying through mechanical means two coats of oil bound distemper over a coat of alkali resistant primer over and including applying 1mm thickness plaster of paris putty to prepare the surface even and smooth complete all as specified and as directed by Engr-in-charge. |
| 79 | Material and labour for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and as directed by Engr-in-charge. |
| 80 | Material and labour for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.complete all as specified and as directed by Engr-in-charge. |
| 81 | Material and labour for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-charge. |
| 82 | Material and labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide priming complete all as specified and as directed by Engr-in-charge. |
| 83 | Supply and fix for in repairs stainless steel kitchen plate rack of size 750x600x250mm, made of 1mm thick stainless steel sheet complete all as specified and as directed by Engr-in-charge. |
| 84 | Taking down rain water pipes including all fittings any size and pattern upto 10th storey floors complete all as specified and as directed by Engr-in-charge. |
| 85 | Material and labour for 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engr-in-charge. |
| 86 | Material and labour for 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engr-in-charge. |
| 87 | Supply and fix in repairs 75mm dia., PVC bends with access door complete all as specified and as directed by Engr-in-charge. |
| 88 | Supply and fix for in repairs 110mm dia., PVC bends with access door complete all as specified and as directed by Engr-in-charge. |
| 89 | Supply and fix for in repairs 110mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and as directed by Engr-in-charge. |
| 90 | Supply and fix for in repairs 75mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and as directed by Engr-in-charge. |
| 91 | Supply and fix for in repairs 110mm dia., vent cowl complete all as specified and as directed by Engr-in-charge. |
| 92 | Taking up or down 20mm dia steel tubing connections, including cleaning for re-fixing or removal to store complete all as specified and as directed by Engr-in-charge. |
| 93 | Taking up or down 25mm dia steel tubing connections, including cleaning for re-fixing or removal to store complete all as specified and as directed by Engr-in-charge. |
| 94 | Taking up or down 32mm dia steel tubing connections, including cleaning for re-fixing or removal to store complete all as specified and as directed by Engr-in-charge. |
| 95 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick walls complete all as specified and as directed by Engr-in-charge. |
| 96 | Supplying and laying of 25mm CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls, ceilings or laying in floors including all fittings complete all as specified and as directed by Engr-in-charge. |
| 97 | Supplying and laying of 20mm CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls, ceilings or laying in floors including all fittings complete all as specified and as directed by Engr-in-charge. |
| 98 | Supply and fix in repairs PP-R gate valves (brass insert) of 25mm dia with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and as directed by Engr-in-charge. |
| 99 | Supply and fix in repairs corner glass shelf, fancy type complete all as specified and as directed by Engr-in-charge. |
| 100 | Supply and fix in repairs fancy type CP 2 way bib cock with wall flanges fixed complete all as specified and as directed by Engr-in-charge. |
| 101 | Supply and fix in repairs fancy type 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engr-in-charge. |
| 102 | Supply and fix in repairs 15mm bore chromium plated fancy type long body bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-charge. |
| 103 | Supply and fix in repairs PVC connection 15mm size 450mm long with CP PTMT nuts complete all as specified and as directed by Engr-in-charge. |
| 104 | Supply and fix in repairs 600x450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building boards on commercial ply wood including provn for hanging clips complete all as specified and as directed by Engr-in-charge. |
| 105 | Supply and fix in repairs PVC body cabinet box mirror of size 350x450x100mm in PTMT alloy of approved patterns and designs complete all as specified and as directed by Engr-in-charge. |
| 106 | Supply and fix in repairs brass chromium plated tubular towell rail 20mm dia, D type, 600mm long between flanges fixed with and including chromium plated brass screws and wooden /plastic cleats complete all as specified and as directed by Engr-in-charge. |
| 107 | Supply and fix in repairs 15mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-charge. |
| 108 | Supply and fix in repairs vitreous china ware wash hand basin white, flat back, size 550x400mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand complete all as specified and as directed by Engr-in-charge. |
| 109 | Supply and fix in repairs standard PVC waste pipe 32mm dia., for WHB complete all as specified and as directed by Engr-in-charge. |
| 110 | Dismantling water tanks exc 500 ltrs and not exc 1000 ltrs complete all as specified and as directed by Engr-in-charge. |
| 111 | Supply, hoisting, fixing in position and connecting incoming and outgoing pipes, 1000 litres capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), triplelayer complete all as specified and as directed by Engr-in-charge. |
| 112 | Supply and fix for PVC flushing cistern 10 ltrs capacity valveless syphonic action type low level, white, with inlet, ball valve float and handle including brackets and flush pipe complete all as specified and as directed by Engr-in-charge. |
| 113 | Supply and fix for 32mm dia., waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed by Engr-in-charge. |
| 114 | Supply and fix for 100mm dia stainless steel gratings without hole /with hole of min weight 50 gms complete all as specified and as directed by Engr-in-charge. |
| 115 | Supply and fix in repairs fancy type 15mm bore angle stop valves, chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-charge. |
| 116 | Supply and fix in repairs single lever cast copper alloy, chromium plated 'hot' and 'cold' 15mm dia fancy type wall mixer complete all as specified and as directed by Engr-in-charge. |
| 117 | Supply and fix for fancy type wall mount SS-304 premium grade stainless steel soap holder/ stand size 11.5(l) x 8.5(b) x 5.5(h) cm fixed with and including chromium plated brass screws and wooden/ plastic cleats complete all as specified and as directed by Engr-in-charge. |
| 118 | Supply and fix for CP health faucet including 1m length SS connecting pipe complete all as specified and as directed by Engr-in-charge. |
| 119 | Supply and fix in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915x460mm bowl size 410x330x160mm complete all as specified and as directed by Engr-in-charge. |
| 120 | Supply and fix in repair vitreous china wash down water closet (pedestal pattern, ETWC), white including fixing bolts, plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engr-in-charge. |
| 121 | Supply and fix in repair vitreous china squatting pan, ‘Orissa’ pattern, size 630x450mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, with trap set and to flushing pipe, anti-syphonage pipe, etc., including making good to floor complete all as specified and as directed by Engr-in-charge. |
| 122 | Material and labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed by Engr-in-charge. |
| 123 | Supply and fix in repairs 25mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) complete all as specified and as directed by Engr-in-charge. |
| 124 | Terrace /RCC Roof Waterproofing: Surface Preparation: Remove existing water proofing treatment. Picking, sweeping clean and washing down with water to remove dust. While doing the treatment on existing roof, concrete should be thoroughly inspected for any significant distress. Such distress, if any repaired/ rehabilitated and treated complete all as specified and as directed by Engr-in-charge. |
| 125 | Bore Packing (for Reinstallation):Preparing the inside surface of core and PVC by roughening using suitable file to get better adhesion prior to packing works. Cleaning the surface by wire brushing followed water jet to remove any laitance or loose flaky particles. Providing necessary formwork for packing the bore using suitable arrangement (depending upon site conditions). Applying a coat of styrenebutadiene based polymer coating using Nitobond SBR to enhance adhesion between the packing material and other surfaces. Packing the gap using nonshrink cement polymer-based grout using conbextra GP2 upto the surface of the bore whilst the Nitobond SBR is in tacky state. The above analysis is based on assumption for 150mm diameter core with 110mm diameter PVC for 5” thick slab only. Typical Properties Compressive strength at 28day as per BS 1881 45N/mm2, complete all as specified and as directed by Engr-in-charge. |
| 126 | Coving treatment: Making coving of 50mm X 50mm at all the flat & vertical junction using Fosroc Renderoc S Single component, shrinkage compensated, fiber reinforced, thixotropic cementitious mortar, to achieves a minimum compressive strength of 20 MPa in 1day and 55 MPa in 28days when tested as per EN 12190 and capable of applying 50mm thickness in single layer of approved product finished flush with existing surface complete all as specified and as directed by Engr-in-charge. |
| 127 | Waterproofing membrane:Material and labour for water proofing treatment on horizontal or vertical surfaces by applying oil bound bitumen primer & 0.20 Kg/Sqm and providing 4 mm thick APP modified water proofing membrane weighing not less than 4 Kg/Sqm reinforced with non-woven polyester matt weighing not less than 160| gm/sqm including minimum 10 cm side lap and 15 cm end lap torch sealed and bonded and applying a coat of blown grade hot bitumen 90/15 over and below the membrane @ 1.20 Kg/Sqm in drying over the membrane finished with solar reflective bituminous aluminium paint/primer @ 0.1lKg/Sqm over RCC roof slab/ projection/ parapet after cleaning the surfaces by removing dust dirt) etc., complete all as specified and as directed by Engr-in-charge.Note: The work shall be carried out complete as per manufacture'rs specifications and application methodology. Execution to be done with authorized trained/skilled applicator with prior experience of more than 5 years in applying similar system.and as per manufacturer technical guidelines laid by manufacturer, Company back guarantee to be given by contractor after completion of water proofing work before payment. |
| 128 | Remove of plants/ bushes with roots from wall and concrete surfaces and applying herbicide 2, 4- Dichlorophenoxyacetic acid as require and make the disturbed area with PCC (1:2:4), type B0 (Using 12.5mm graded stone aggregate) or cement mortar 1:4 complete all as specified and as directed by Engr-in-charge. |
| 129 | Removing building materials etc., to a distance of 10.0 km, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and as directed by Engr-in-charge. |
| 130 | Taking down carefully copper /aluminium point wiring (light, fan, socket or power) complete, including fittings and fixtures such as switches, sockets,ceiling rose, pendants, regulators, light fittings etc., removing materials to store for keeping in safe custody for taking credit and making good to disturbed surfaces with plaster and matching with the existing colour of wall/ floor etc., complete all as specified and as directed by Engr-in-charge. |
| 131 | Taking down carefully ceiling fan from ceiling, dismantaling blades, and removing fan and painting of ceiling fans complete, with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc., and refixing of ceiling fan in same position in serviceable condition with greasing and oiling including provision of three core 1.5 sqmm cable from ceiling rose to fan connector complete all as specified and as directed by Engr-in-charge. |
| 132 | Taking down carefully exhaust fan from wall, cleaning all dust etc., and refixing of exhaust fan in same position in serviceable condition with greasing and oiling including nuts, bolts, washer including provision of three core 1.5 sqmm cable from ceiling rose to exhaust fan complete all as specified and as directed by Engr-in-charge. |
| 133 | Taking down carefully and refixing the geyser of capacity 50/ 25 Ltrs after repair in new position in serviceable condition including drilling holes in any type wall fixing four nos anchor bolts five inch size, nuts and washer and connected to water pipe line with 02 Nos hot and cold 600mm long connection pipe and electric connection testing and painting of geyser with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc., complete all as specified and as directed by Engr-in-charge. |
| 134 | Taking down carefully the electric meters from meter board and servicing/ overhauling of electric energy meters of any size/ any capacity including testing of meters for running properly and accuracy including load testing with proper equipments and refixing the same including connecting up and provision of cable complete all as specified and as directed by Engr-in-charge. |
| 135 | Material and labour for concealed point wiring with 1.5 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volts grade cable in and including PVC rigid conduit medium grade of size not less than 25mm dia ISI marked with all accessories such as tee, bend, joint cover etc., round/ square PVC blocks at junction for batten holders, ceiling rose etc., screws, gutti/ roul plugs PVC all as per site requirements including fixing on stone walls/ brick masonary walls surface /ceilings / floors etc., modular MS sunken boxes with earth dolly for mounting of modular switches/ sockets/ regulator etc., and 1.5 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as continuous earth lead connected to common earth dolly and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces /wall with plaster and matching with the existing colour of wall /floor etc., complete all as specified and as directed by Engr-in-charge for the following:Note: Cutting, chasing, drilling in any type of wall for fixing of concealed conduit and sunken boxes included in quoted rate. No extra payment will be made for this. |
| 136 | One light point controlled by one single pole 5 Amps switch. |
| 137 | One ceiling fan point controlled by one single pole 5 Amps switch. |
| 138 | One exhaust fan point controlled by one single pole 5 Amps switch. |
| 139 | One 5 pin socket point 5 Amps on independent board. |
| 140 | One 5 pin socket point 5 Amps on same board with other switches. |
| 141 | One bell/buzzeer point controlled by one push button 5 Amps switch on independent board. |
| 142 | One light point controlled by two 2-way switches, with cables 1.5 sq. mm size. |
| 143 | All as per item No.134 here-in-before but for power point wiring with 2.5 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volt grade cable and 2.5 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volt grade cable as continuous earth lead for 6 pin 15 Amp switch socket outlet on independent board complete all as specified and as directed by Engr-in-charge. |
| 144 | Supply and fix for modular switch, 1 Module single pole one way 10 Amps complete all as specified and as directed by Engr-in-charge. |
| 145 | Supply and fix for modular socket, 2 Module, 6 Amps, 5 pin, 230 volts AC complete all as specified and as directed by Engr-in-charge. |
| 146 | Supply and fix for modular switch, 1 Module single pole one way 16 Amps complete all as specified and as directed by Engr-in-charge. |
| 147 | Supply and fix for modular socket, 2 Module, 6/16 Amps, 6 pin, 230 volts AC complete all as specified and as directed by Engr-in-charge. |
| 148 | Supply and fix for modular switch two way 10 Amps, 1 module 230 volts complete all as specified and as directed by Engr-in-charge. |
| 149 | Supply and fix for modular type fan regulator upto 120 watts with 5 step speed control for fans any sweep 1200 /1400mm complete all as specified and as directed by Engr-in-charge. |
| 150 | Supply and fix for modular type bell push flush type one way 6 Amp 230 Volt complete all as specified and as directed by Engr-in-charge. |
| 151 | Supply and fix for call bell ding dong type 230 Volt single pole complete all as specified and as directed by Engr-in-charge. |
| 152 | Supply and fix for PVC ceiling rose 65x50mm surface type with 3 terminals 230 volt complete all as specified and as directed by Engr-in-charge. |
| 153 | Supply and fix for modular white cover plate with frame, 1 module complete all as specified and as directed by Engr-in-charge. |
| 154 | Supply and fix for modular white cover plate with frame, 2 module complete all as specified and as directed by Engr-in-charge. |
| 155 | Supply and fix for modular white cover plate with frame, 3 module complete all as specified and as directed by Engr-in-charge. |
| 156 | Supply and fix for modular white cover plate with frame, 4 module complete all as specified and as directed by Engr-in-charge. |
| 157 | Supply and fix for modular white cover plate with frame, 6 module complete all as specified and as directed by Engr-in-charge. |
| 158 | Supply and fix for modular white cover plate with frame, 8 module complete all as specified and as directed by Engr-in-charge. |
| 159 | Supply and fix for modular metal flush box 1/2 module complete all as specified and as directed by Engr-in-charge. |
| 160 | Supply and fix for modular metal flush box 3 module complete all as specified and as directed by Engr-in-charge. |
| 161 | Supply and fix for modular metal flush box 4 module complete all as specified and as directed by Engr-in-charge. |
| 162 | Supply and fix for modular metal flush box 6 module complete all as specified and as directed by Engr-in-charge. |
| 163 | Supply and fix for modular metal flush box 8 module complete all as specified and as directed by Engr-in-charge. |
| 164 | Supply and fix for LED lights fitting 4 feet 20 watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engr-in-charge. |
| 165 | Supply and fix for LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engr-in-charge. |
| 166 | Supply and fix for LED light fitting outdoor type 10 watt bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engr-in-charge. |
| 167 | Supply and fix for LED building security light fitting 35 watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed by Engr-in-charge. |
| 168 | Supply and fix for sheet metal enclosure for DB's double door SPN, 12 ways when MCBs to be used single pole and neutral, deep drawn with 200 Amps rated copper bus bar 230 Volt complete all as specified and as directed by Engr-in-charge. |
| 169 | Supply and fix for MCB SP, 6-32 Amps, 230V, C- series with breaking capacity of 10 KA complete all as specified and as directed by Engr-in-charge. |
| 170 | Supply and fix for MCB SPN, 40 Amps, 230 V, C- series with breaking capacity of 10 KA complete all as specified and as directed by Engr-in-charge. |
| 171 | Supply and fix for sheet metal enclosure for DB's double door TPN 04 ways including MCCB 125 Amps to be used as incomer and outgoing as MCB single pole, deep drawn with 200 Amps rated copper bus bar 415 V complete all as specified and as directed by Engr-in-charge. |
| 172 | Supply and fix for ceiling fans complete with blades, down rods, electronic regulator and accessories, AC single phase 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed by Engr-in-charge. |
| 173 | Material and labour for sub main wiring with two single core 6 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC casing and caping ISI marked broken white or of cream colour with all accessories such as tee, bend, joint cover etc., screws, gutti /roul plugs PVC all as per site requirements including fixing on surface on stone walls /brick masonary walls /ceilings /floors etc., with 6 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green complete all as specified and as directed by Engr-in-charge.Note: Two run of 6 sqmm single core cable and one run 6 sqmm earth wire including PVC casing and capping together will be measured as one unit. |
| 174 | Material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edged of the plate not less than 1.5m below normal ground level, connected to galavanised iron earth lead by means of bolt, nut, check nut and washer of galvanised iron steel wire 4mm dia as earthing lead as shown in Electrical Plate No 3 of SSR Part I connected to earthing test point or indicated including testing on completion including necessary excavation and earth work in soft/ loose soil, earth pit in PCC 1:3:6 type C1 using 20mm stone aggreate, funnel, 20mm dia GI medium grade water pipe, 15mm dia GI light grade earth lead protection pipe, CI frame and cover, wire, copper lugs, funnel and wire mesh, charcoal or coke and common salt in alterative layer all around the earth electrode compacted thickness 15 cm including excavation and earth work pit cover including disposal of surplus soil to a distance not exc 50m, complete testing on completion all complete as shown in electrical plate no-3 of SSR part No1 complete all as specified and as directed by Engr-in-charge.Note: The unit rate includes main earthing lead galavanised iron steel wire 4mm dia with 15mm dia GI light grade earth lead protection pipe from earth electrode to test point upto 7.5m. |
| 175 | Supply and fix for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit /pipe or fixed to poles or any other indicated situation for loop earthing 4mm dia galvanised iron or steel wire complete all as specified and as directed by Engr-in-charge. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender