Tender For Allied Work At Sc Shahpur

Sharing tender

Tender For Allied Work At Sc Shahpur= 1 Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) In Trenches For Foundations, Drains, Pipes, Cables Etc. (Not Exceeding 1.5 M In Width) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed, Within A Lead Of 50 Metres. All Kinds Of Soil : 2 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:5:10 (1 Cement : 5 Coarse Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size) 3 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With:1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size) 4 Brick Work With Common Burnt Clay (Non-Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth Including Curing In Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand) & Extra For Brick Work With Common Burnt Clay Bricks/Cement Concrete Bricks In Superstructure Above Plinth Level Upto Floor Five Level 5 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Upto 15°, Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Upto Five Level Including Curing But Excluding The Cost Of Centring, Shuttering, Finishing And Reinforcement With 1:1½:3 (1 Cement : 1½ Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size) 6 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level & Above Plinth Level Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 7 Centering And Shuttering Including Strutting, Propping Etc And Removal Of Form Work For Mass Concrete 8 Foundations, Footings, Bases For Columns 9 Suspended Floors, Roofs, Landings, Balconies And Access Platforms 10 Edges Of Slabs And Breaks In Floors And Walls Under 20 Cm Wide 11 Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc Including Priming Coat With Approved Steel Primer All Complete Fixed To Steel Windows By Welding. 12 Providing And Laying Rectified Glazed Ceramic Floor Tiles Of Size 300X300 Mm Or More (Thickness To Be Specified By The Manufacturer), Of 1St Quality Conforming To Is : 15622, Of Approved Make, Laid On 20 Mm Thick Cement Mortar 1:4 (1Cement : 4 Coarse Sand), Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete.In All Colours, Shades, Except White, Ivory, Fume Red Brown. 13 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is : 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Size 300X450Mm As Approved By Engineer- In-Charge, In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3 Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 14 Providing & Fixing Glazed Shutters For Doors , Windows And Clerestory Windows Using 10 Kg / Sqm. (4 Mm Thick) Float Glass Panes, Incl. Isi Marked M.S Pressed Butt Hinges Bright Finished Off Required Size With Necessary Screws 35 Mm Thick Of Second Class Deodar Wood. 15 Providing And Fixing Wire Gauze Shutters 35 Mm Thick Using Galvanized M.S. Wire Gauze Of Average Width For Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.63 Mm For Doors, Windows And Clerestory Windows With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws As Per Direction Of Engineer-In-Charge : Second Class Deodar Wood. 16 Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is: 2202 (Part I) Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters. With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws 17 Distemper With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade New Work (Two Or More 18 Coats ) Over And Including Priming Coat With Cement Primer Including All Carriages And Cost Of Materials Involved. 19 Applying Priming Coat With Ready Mixed Pink Or Grey Primer Of Approved Brand And Manufacture On Wood Work (Hard And Soft Wood 20 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade. 21 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot And Cold Water Supply, Including All Cpvc Plain And Brass Threaded Fittings. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge.15Mm Nominal Outer Dia Pipes. 22 Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Liter Low Level White P.V.C. Flushing Cistern, Including Flush Pipe With Manually Controlled Device (Handle Lever), Conforming To Is:7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required: W.C. Pan With Isi Marked White Solid Plastic Seat And Lid. 23 Providing And Fixing 15 Mm Nominal Bore C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690 Gms 24 Providing And Fixing 15 Mm Nominal Bore C.P. Brass Bib Cock Of Approved Quality Conforming To Is : 8931 25 Providing And Laying Pvc Accessories And Fitting Of Approved Make Supreme/ Finolex/ Astral Or Equivalent. 26 110Mm Dia Door Tee 27 110Mm Dia Collar. 28 110Mm Dia Plain Bend