Tender For Construction Of 3 Nos.Cover Shed, Reinforced Cement Concrete Drain And Laying Factory Madeof Paver Block At Bindhan Haat, Under Rmc Jajpur
Tender Value
56.62 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
20 days left
EMD
56627
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jajapur → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of 3 Nos.Cover Shed, Reinforced Cement Concrete Drain And Laying Factory Madeof Paver Block At Bindhan Haat, Under Rmc Jajpur
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches in hard soil of soil including moorum, stony earth and earth mixed with boulders except sheet rock and boulders requiring blasting including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site within initial leads and lifts, including shoring, shuttering & dewatering (if required) with cost of labour,cess, hire & running charges of water pumps sundries T & P & all other machineries required for the work etc.complete in all respect as per latest specification & direction of the Engineer in charge. |
| 2 | Earth work in excavation of foundation trenches in hard soil of soil including moorum, stony earth and earth mixed with boulders except sheet rock and boulders requiring blasting including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site within initial leads and lifts, including shoring, shuttering & dewatering (if required) with cost of labour,cess, hire & running charges of water pumps sundries T & P & all other machineries required for the work etc.complete in all respect as per latest specification & direction of the Engineer in charge. |
| 3 | Supplying and filling in foundation and plinth with good river sand well watered and rammed in layers not exceeding 23 cm in each layer including all leads and lifts, cost of all materials, labour,cess, sundries, T&P required for the work etc.complete in all respect as per latest specification & direction of the Engineer in charge. |
| 4 | Providing and lying plain cement concrete of proportion (1:3:6) in foundation and plinths using approved quality cement , 40 mm. size black hard hand broken granite stone metal and screened, washed sharp sand for mortar of approved quality and from approved quarry, including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, cess, sundries, T&P & all other machineries required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump etc.complete in all respect as per latest specification & direction of the Engineer in charge. |
| 5 | R.C.C. work of M 20 (equivalent to nominal mix of proportion (1:1.5:3) having a minimum compressive strength (in work test) of 200 Kg/cm2 in 15 cm. Cubes at 28 days after mixing and test conducted in accordance with IS 456 & 516 using 6mm to 20 mm (1/4” to 3/4\\") size (18mm not to exceed 25 percent) hard black broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete, watering and curing for four weeks centering and shuttering and finishing the exposed surface smooth to receive painting or white or colour washing providing grooves or beads where necessary cost and conveyance royalties and taxes of all materials and labour required for the work etc. complete with all T & P in all respect but excluding cost of M.S. rods or Tor steel and binding wires of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding etc. of the M.S. Rod and binding wires and tying the grills and placing in proper position in all floors. Column footing, Base. |
| 6 | Grade beam/Tie beam/Plinth band |
| 7 | Column & Beam (up to 5m. ) |
| 8 | RCC wall |
| 9 | Providing fixing and placing of Tor steel (HYSD FE-500 Make- (SAIL/ JINDAL/ RINL/ SHYAM/ TISCON) for RCC work in all floors of required diameter of approved quality with straightening bent up or coiled rods\\" Tor rods\\" cutting, bending, cracking, hooking, welding or jointing(if required) the \\"Tor steels rods\\" & binding wire and tying the grills hoisting laying and placing in proper position as required for RCC works for providing if an hooks including cost, conveyance and taxes of Tor steel and binding wire of 18 to 20 gauge and labour with T & P required for the work etc. complete in all respect in all floors (weight of the binding wire will not be considered for payment) complete. |
| 10 | Flyash Brick masonary in Foundation and plinth in cement mortar (1:6) using the flyash bricks including hoisting to required height placing in position scaffolding, splays cutting, circular moulding, corbelling, chamfering and similar such type of work watering and curing etc. including cost, conveyance, royalty, cess, and taxes of all other materials machineries scaffolding all labour T&P articles required for the work etc. complete in all respect as per the latest specification confirming to relevant IS Specification and direction of the Engineer-in-charge. |
| 11 | Providing and plastering 12 mm thick Cement Plaster (1:6) in ground floor (up to 3mt height) over brick work with curing etc as directed by the Engineer-in-charge.Upto 3 mt height. |
| 12 | Painting 2 coats with weather coat to exterior walls over one coat of priming on new work including cost of paint as directed by the Engineer-in-charge.Upto 3 mt height. (Ground floor). |
| 13 | Painting 2 coats with weather coat to exterior walls over one coat of priming on new work including cost of paint as directed by the Engineer-in-charge.Upto 3 mt height. (Ground floor). |
| 14 | Supplying, fabrication,fitting ,fixing and erection of M.S tubular truss and purlins including all labour, T&P taxes etc complete. |
| 15 | Supplying, fabrication,fitting ,fixing and Purline made out of M.S Angle/Channel including all material & erection. |
| 16 | Cost, supplying and labour for fixing of anticorrossive zinc aluminium alloy painted coloured profile steel roofing sheet of 0.50 mm thick in roof of godown including fixing of ridge caps with fasteners of approved specification etc complete but excluding cost of fastners including drilling holes etc complete as directed by the Engineer-in-charge |
| 17 | Supplying fitting and fixing of holding down bolts including all cost labour etc. complete. |
| 18 | Filling in foundation &plinth with excavated materials including watering & ramming as directed by the Engineer-in charge .(2/3rd rate of respective item ) |
| 19 | Providing andlaying P.C.C (1:2:4)with 12mm size HG chips including all cost, conveyance,royalty & taxes etc.comp.to work site as per the specification approved by the department & direction of E.I.C |
| 20 | Cost,supplying & labour for spreading metal 40 mm to 62 mm for IRC Gr.I metalling to an uniform thickness of 100 mm compacted to 75 mm. And packing the voids with small stones and hand packing the same to proper camber including conveying spreading of filler materials and filling the interstices by spreading the same over the surface watering &consolidation with PRR including hire &running charges of PRR complete including all cost of material conveyanve, royalties,taxes etc. complete. |
| 21 | Providing and Laying Factory made Chamfered edge Cement Concrete Paver Bliocks of required strength, thickness & size/shape made by table Vibratory method , to attain superior smoth finish using PU or Equivalent moulds ,Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand , copmacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compaction by using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required size/Pattern, finishing and sweeping extra sand in footpath , parks, lawns, drive ways, or light traffic parking and Lanes/Road etc, all complete as Per Manufacturers Specifications and Driection of Engg -In -Charge. 80mmm thick C.C. Paver Blocks of M-35 grade With approved colour design Pattern etc. complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender