Tender For Cleaning & Repair Of Sewage Line & Manhole, Soakage Well And Septic Tanks In A A Banar Under Ge Banar
Tender Value
45 Lakhs
Estimated cost
Bid Submission
12 Aug 2026
10 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Cleaning & Repair Of Sewage Line & Manhole, Soakage Well And Septic Tanks In A A Banar Under Ge Banar
BOQ
| Sl. No. | Item Description |
| 1 | Dewatering including Desludging of septic tank/soakage well/STP wells of depth upto 8 Mtr height by using mechanical pump or by manual means after plugging of incoming sewage lines and throwing water into non residential area or in drain/nallah complete all as specified. |
| 2 | Cleaning of septic tanks/STP wells of any size and the height upto 8 Mtr by removing sludge including bailing out of sludge water from septic tank and loading the same to sealed container/tank lorry and removing out side the defence land including bailing out foul water by any means and supplying & spreading earth brought from outside the MD land in layer of thickness 25mm complete all as specified and directed by Engineer-in-charge. Note : Dewatering of septic tank shall be measured in Ser Item No 1.00 here-in-before and depth of sludge/mud only shall be measured in this Item and disposal of sludge shall be removed outside the defence land as directed by Engr-In- Charge. |
| 3 | Cleaning of manholes of any size by removing sludge, foreign material and removing from site of manholes n.exc 1.5 mtr deep complete all as specified. |
| 4 | Cleaning of manholes of any size by removing sludge foreign material and removing from site of manholes exceeding 1.5 mtr deep complete all as specified. |
| 5 | Cleaning of 150 mm SGSW or RCC pipe sewage line by rodding by bamboo strips /Steel rod /pumping in between MH and/ or gully trap foul condition including removing the sludge out side MD land and burried in pit complete all as specified and directed by Engineer-in-charge. Note : Cleaning shall be carried out after every six months and accordingly will be paid.Note: Cleaning of lines shall be carried out after every six months and accordingly will be paid. |
| 6 | Cleaning of 100 mm SGSW or RCC pipe sewage line by rodding by bamboo strips /Steel rod /pumping in between MH and/ or gally trap foul condition including removing the sludge out side MD land and burried in pit complete all as specified.Note: Cleaning of lines shall be carried out after every six months and accordingly will be paid. |
| 7 | Removing of blockage from WC/floor trap / Nahani trap/ gully trap to 1st manholes by opening grating & refixing the same after cleaning complete all as specified.Note : No extra payment shall be admissible on this account to the contractor. |
| 8 | Removing with roots the vegetation, small bushes or tree girth upto 10cm, grown on or along with the main gradient of the sewer line and around the manholes including necessary excavation in any type of soil and depth, making good the disturbed surfaces all around complete all as specified. |
| 9 | M&L for excavation in trenches n.exc 1.5m wide and 1.5m deep for foundation etc or for shafts, well, cesspits manholes etc n.exc 10 sqm on plan and getting out in soft/loose soil complete all as specified. |
| 10 | Returning fillling in including spreading levelling watering and well ramming in layers n.exc 25cm in soft/loose soil complete all as specified. |
| 11 | Removing excavated soil to a distance n exc 50m depositing directed at a level n.exc 1.5m above the starting level complete all as specified. |
| 12 | Demolition and breaking up drain pipes ( AC or reinforced concrete) of internal dia 150mm set in cement mortar of any description including the Demolition of PCC under and haunching etc complete all as specified. |
| 13 | Demolition and breaking up drain pipes ( AC or reinforced concrete) of internal dia 200mm set in cement mortar of any description including the Demolition of PCC under and haunching etc complete all as specified. |
| 14 | Demolition and breaking up drain pipes ( AC or reinforced concrete) of internal dia 300mm set in cement mortar of any description including the Demolition of PCC under and haunching etc complete all as specified. |
| 15 | Material and labour for PCC (1:3:6) type C-2 using 40mm graded stone aggregate in concrete bedding to drain pipes 150mm bore including packing under and completely surrounding pipes with concrete after they are laid and tested complete all as specified. |
| 16 | Material and labour for PCC (1:3:6) type C-2 using 40mm graded stone aggregate in concrete bedding to drain pipes 200mm bore including packing under and completely surrounding pipes with concrete after they are laid and tested complete all as specified. |
| 17 | Material and labour for PCC (1:3:6) type C-2 using 40mm graded stone aggregate in concrete bedding to drain pipes 300mm bore including packing under and completely surrounding pipes with concrete after they are laid and tested complete all as specified. |
| 18 | Providing lowring,laying,aliginin,fixing in postion and joining at all level/depths full round HDPE DWC (Double wall corrugated)150mm dia pipes with reqd jointing accessories of SN8 grade as per IS 16098 (Part-2) amended upto date in trenches in complete including all material,labour,sectional hydrotesting(including the cost and conveyanceof water to site fortesting) and Comissioning as per Tecnical sepcifications,drawing and as per direction and as per direction of Engineer-in Charge. |
| 19 | Providing lowring,laying,aliginin,fixing in postion and joining at all level/depths full round HDPE DWC (Double wall corrugated)200mm dia pipes with reqd jointing accessories of SN8 grade as per IS 16098 (Part-2) amended upto date in trenches in complete including all material,labour,sectional hydrotesting(including the cost and conveyanceof water to site fortesting) and Comissioning as per Tecnical sepcifications,drawing and as per direction and as per direction of Engineer-in Charge. |
| 20 | Providing lowring,laying,aliginin,fixing in postion and joining at all level/depths full round HDPE DWC (Double wall corrugated)300mm dia pipes with reqd jointing accessories of SN8 grade as per IS 16098 (Part-2) amended upto date in trenches in complete including all material,labour,sectional hydrotesting(including the cost and conveyanceof water to site fortesting) and Comissioning as per Tecnical sepcifications,drawing and as per direction and as per direction of Engineer-in Charge. |
| 21 | Demolition of Brickwork, PCC or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified. |
| 22 | Material and labour for Random Rubble walling built in cement mortar 1:6 un- coarsed well bonded bedded and solidly hearted complete all as specified. |
| 23 | Material and labour for Random Rubble walling built in cement mortar 1:6 un- coarsed well bonded bedded and solidly hearted except stone complete all as specified. |
| 24 | Extra over on stone walling for hammer dressing to face stone with maximum depression on face from straight edge n.exc 20 mm and dressing faces beds and joints as specified to square rubble walling regular course Jodhpur type all as specified. |
| 25 | Material and labour PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in copping including necessary form work, weathering slightly rounded or chamferred angles and thoating complete all as specified. |
| 26 | Material and labour for 15mm thick rendering in CM 1:4 on stone masonry surfaces finished even and smooth without using extra cement complete all as specified. |
| 27 | S & F in repair CI cap/ cover for oval acces door bends of 100 mm dia CI pipes with nuts and bolts including rubber packing complete all as specified and directed by Engineer-in-charge. |
| 28 | S & F in repair CI cap/ cover for oval acces door bends of 75 mm dia CI pipes with nuts and bolts including rubber packing complete all as specified. |
| 29 | Dismantling of old unserviceable MH/GT covers and removing from site complete all as specified. |
| 30 | M & L Stone slab 25 mm to 35 mm thick dressed true and square in one length not less than 60 cm and n exc 120 cm in man hole covers completed all as specified.. Note : Four holes shall be made in each manhole cover two handle shall be fixed using four holes made from mild steel as directed by Engineer-in-Charge and MS bars shall be paid separately |
| 31 | M & L Stone slab 25 mm to 35 mm thick dressed true and square in one length not less than 30 cm and n exc 60 cm in man hole covers completed all as specified and directed by Engineer-in-charge. Note : Two holes shall be made in each GT cover one handle shall be fixed using two holes made from mild steel as directed by Engineer-in-Charge and MS bars shall be paid separately |
| 32 | M&L for mild steel in flat, round or square bars in available length, Grade Fe-290 (Gde E-165) duly deformed and suitable for manhole cover handle complete all as specified. |
| 33 | Cleaning of 150mm/100mm dia SGSW/RCC pipe by using hydraulic machine as and where required by Engineer-in-Charge |
| 34 | All as per Item No 33 herein before but 200mm dia pipe |
| 35 | All as per Item No 33 herein before but 300/450mm dia pipe |
| 36 | Disconnecting existing tanks, setting aside (or lowering if required) exc. 250 ltr not exc. 500 ltr for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) |
| 37 | Disconnecting existing tanks, setting aside (or lowering if required) exc. 500 ltr not exc. 1000 ltr for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) |
| 38 | Dismantling water tanks 250 to 500 Ltrs capacity (Steel/AC/RCC/PVC tanks) & removing from site all as specified. |
| 39 | Dismantling water tanks 500 to 1000 Ltrs capacity (Steel/AC/RCC/PVC tanks) & removing from site all as specified. |
| 40 | Cleaning and removing all scale and dirt, etc, from exc. 250 ltr not exc. 500 ltr tanks and from mouths of circulating pipes, etc. |
| 41 | Cleaning and removing all scale and dirt, etc, from exc. 500 ltr not exc. 1000 ltr tanks and from mouths of circulating pipes, etc. |
| 42 | Supply & Fixing , Rotational moulded , polythene water Tank 500 ltr capacity (cylindrical vertical with closed top), hoisted and fixed in position complete all as specified and directed.(Make- Syntex, Colour- White) |
| 43 | Supply & Fixing , Rotational moulded , polythene water Tank 1000 ltr capacity (cylindrical vertical with closed top), hoisted and fixed in position complete all as specified and directed. (Make- Syntex, Colour- White) |
| 44 | Taking up or down 15mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing were required including cleaning for refixing or removal from site complete all as specified. |
| 45 | Taking up or down 20 mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing were required including cleaning for refixing or removal from site complete all as specified. |
| 46 | Supply & fixed GI tubing medium grade 15mm dia incl fittings, cutting threading and fixing to walls or fixing in concealed walls or in floors etc, and making good the surfaces matching to exsiting surafaces of walls/ floor to the entire satisfaction of Engineer-in-charge. |
| 47 | Description all as per Srl item No 46 here in before but 20mm complete all as specified |
| 48 | Supply and fixed (in repair) stop valves, cast copper alloy,15 mm dia pipe, ISI marked, screwed down, high pressure with crutch or butterfly handle (concealed type) with fancy type chromium plated screwed both ends for iron pipes or for unions, complete all as specified. |
| 49 | Supply and fixed (in repair) stop valves, cast copper alloy,20 mm dia pipe, ISI marked, screwed down, high pressure with crutch or butterfly handle (concealed type) with fancy type chromium plated screwed both ends for iron pipes or for unions, complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender