Tender For Repair/Maintenance Of Motors, Pumps Fire Fighting Pump, Dewatering Pump, Hydrants And Connected Items Of Naval Dockyard Under Ge(Nw) Kunjali
Tender Value
1 Crore
Estimated cost
Bid Submission
26 Aug 2026
2 days left
EMD
1.75 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maintenance Of Motors, Pumps Fire Fighting Pump, Dewatering Pump, Hydrants And Connected Items Of Naval Dockyard Under Ge(Nw) Kunjali
BOQ
| Sl. No. | Item Description |
| 1 | M&L for disconnecting horizontal / vertical split casing pump / Submersible pump ofexisting make/model, dismantling and taking out pump shaft assembly complete for replacement of pump bearing DE or NDE replacement of pump gasket including greasing the pumpset connecting to coupling testing and commissioning complete all as specified and directed for sizes / capacities of pump coupled with 200/250/280/300 HP motor :- Note :- Rates deemed to be included for decoupling and coupling pump with motor. suitable of bearing Make : SKF bearing No. 3310/3310ATN/ 6310/ 6310-2Z/3309/ 6309 or equivalent |
| 2 | All as per item No 1 Above But Pump coupled with 150 HP motor suitable of bearing Make : SKF bearing No.3309/ 6309/7326 BECBM or equivalent\\"of NBC/THORDON/ RHP/NBC/THORDON |
| 3 | All as per item No 1 Above But Pump coupled with 60/75/50/40 HP motor bearing make SKF bearing No. 3309/ 6309/ 3307/ 6307 or equivalent\\"of NBC/THORDON/RHP |
| 4 | All as per item No 1 Above But Pump coupled with 10/12.5/ 15/ 20/ 25/ 30 HP\\" motor bearing make : SKF bearing No. 3306/6306/ 3307/ 6307/ or equivalent\\" of NBC/THORDON/RHP |
| 5 | All as per item No 1 Above But Pump coupled with 7.5/5 HP motor bearing . Make : SKF bearing No. 3306/ 6306/ 3305/6305 or equivalent\\" of NBC/THORDON/RHP |
| 6 | All as per item No 1 Above But Pump coupled with any HP motor bearing . Make : SKF bearing No. 21315EK +H315 EXPLORER or equivalent\\" of NBC/THORDON/RHP |
| 7 | S&F in repair pressure gauge 150 mm dia range 0-10 kg/Sqcm ,all as specifeid Note : Rate quoted deemed to be included for providing adopter/Ferrule/check nut etc required for fixing of pressure guage. |
| 8 | S & F in repair taper sleeve complete all as specified and directed . |
| 9 | S & F in repair circlip complete all as specified and directed . |
| 10 | S &F in spider bush from 5 hp to 250HP motor all as specified and directed |
| 11 | S&F in repair MS coupling suitable to 200 to 250 HP pumps at various installations complete all as specified and directed. |
| 12 | S&F in repair MS coupling suitable to 50 to 150 HP pumps at various installations complete all as specified and directed . |
| 13 | S&F in repair MS coupling suitable to 40 to 5 HP pumps at various installations complete all as specified and directed . |
| 14 | M & L for alignment of motor pump of various installations in Naval Dockyard from 30 hp to 250 hp including taking down of pump replacement of spare parts and reinstall at same location complete all as specified and directed.( NOTE: spares to be measured and paid seperately) |
| 15 | S &F in repair 100 mmcoupling rubber for pumps at various installations complete all as specified and directed. |
| 16 | S &F in repair 110 mmcoupling rubber for pumps at various installations complete all as specified and directed. |
| 17 | S &F in repair 150 mmcoupling rubber for pumps at various installations complete all as specified and directed . |
| 18 | S &F in repair 190 mmcoupling rubber for pumps at various installations complete all as specified and directed . |
| 19 | S &F in repair 225 mmcoupling rubber for pumps at various installations complete all as specified and directed. |
| 20 | S&F in repair DE/NDE bearing including necessary greasing reassemble the motor connect, testing and commissioning complete for Motor capacity 200/250/280/300 HP bearing make SKF bearing No. 6319/ 6316/ or equivalent\\" complete all as specified and directed. |
| 21 | All as item no 20.00 above but Motor capacity 100 to 150 HP suitable bearing Make : SKF bearing No. 7320/6317/ 6314/ 6313/6320/C3 or equivalent\\" /NBC/THORDON/RHP/NBC/THORDON/RHP complete all as specified and directed. |
| 22 | All as item no 20.00 above but Motor capacity 60/75/ 50/40\\" HP suitable bearing make SKF bearing No. 6313/ 6311/ 6310/6319C3/6310-2Z or Techno commercial equivalent\\" complete all as specified and directed. |
| 23 | All as item no 20.00 above but Motor capacity 10/12.5/15/20/25/30 HP\\" suitable bearing make : SKF bearing No. 62036309/ 6308/ 6208/ 6209/ 6307/6216 Techno commercial equivalent\\" complete all as specified and directed. |
| 24 | All as item no 20.00 above but Motor capacity with 7.5/5 HP suitable bearing . Make : SKF bearing No. 6306/ 6305/ 6206/ 6205 or Techno commercial equivalent\\" complete all as specified and directed. |
| 25 | All as item no 20.00 above but Motor bearing . Make : SKF bearing No. 3306/ 6306/ 3305/6305 or equivalent\\" |
| 26 | M& L for Disconnecting LT cables of various sizes from electric motor of different capacities and decoupling from the pumping sets , removing and taking down carefully and transporting to authorised workshop for Overhauling and rewinding strip opening and dismantling complete rotor and stator assemby , cutting ;and taking out old burnt copper winding from the stator assembly and cleaning the slots of stor with carbon tetra chloride solution .Material and labour for rewinding complete stator assembly with and including super enamelled copper winding wire of suitable gauge machine with existing .Applying the minimum two coats of insulation varnish and keeping the stator assembly in heating chamber to improve for insulation value. Assemblyling the motor , transporting to site of worik, coupled with the pumping sets allingments properly , connecting the LT cables and testing and commissioning complete of the capacity of Electric Motors : 200/250 HP Capacity complete all as specified and directed. |
| 27 | All as item no 20.00 above but Motor 150 HP Capacity complete all as specified and directed. |
| 28 | All as item no 20.00 above but Motor 60/75/50/40 HP Capacity complete all as specified and directed. |
| 29 | All as item no 20.00 above but Motor 30/25/20/10/12.5 HP Capacity complete all as specified and directed. |
| 30 | All as item no 20.00 above but Motor 5/7.5/3.5/3/2.5 HP Capacity complete all as specified and directed. |
| 31 | S&F in repair/replacement of main contactor suitable for following capacity of motors including taking down old one :- MNX 300, 3 pole, 415V, 50 Hz complete all as specified and directed. |
| 32 | All as item no 31.00 above but MNX 140, 3 pole, 415V, 50 Hz |
| 33 | All as item no 31.00 above but MNX 95 , 3 pole, 415V, 50 Hz |
| 34 | All as item no 31.00 above but MNX 32 , 3 pole, 415V, 50 Hz |
| 35 | All as item no 31.00 above but MNX 18, 3 pole, 415V, 50 Hz |
| 36 | All as item no 31.00 above but MNX 1.5, 3 pole, 415V, 50 Hz |
| 37 | S&F in repair/replacement of over load relay 300 to 7.5 HP motor , Relay range 415V, 50 Hz Make :L&T/Havells/Siemens complete all as specified and directed. |
| 38 | S&F in repair/replacement of MCCBs fixed in existing panel board of the following size MCCB 3 Phase (TP) 630A 50Hz, 50 KA complete all as specified and directed. |
| 39 | All as item no 38.00 above but MCCB 3 Phase (TP) 200A 50Hz, 36 KA |
| 40 | All as item no 38.00 above but MCCB 3 Phase (TP) 100A 50Hz, 25 KA |
| 41 | All as item no 38.00 above but MCCB 3 Phase (TP) 160A 50Hz, 36 KA |
| 42 | M & L for replacement of unserviceable pump,Shaft, line shaft,Shaft Sleeves of any type including Stainless for following cap pump sets :- 300/280/250/200 HP complete all as specified and directed. |
| 43 | All as item no 42.00 above but 150/75/60/50/40/30 HP |
| 44 | All as item no 43.00 above but 25/20/15/12.5/7.5/5 HP |
| 45 | M & L for replacement of unserviceable impeller incl impeller ring,Impeller Collet and casing ring and balancing of rotating assembly with impeller and repair to all bowles,bushes,replacement of strainer as per existing of any type suitable for following cap pump sets :- 300/280/250/200 HP complete all as specified and directed. |
| 46 | All as item no 45.00 above but 150/75/60/50/40/30 HP |
| 47 | All as item no 45.00 above but 25/20/15/12.5/7.5 HP |
| 48 | M & L for replacement of unserviceable air release valve made out of Stainless steel of any size / cap of pump set::- 300 HP to75 HP complete all as specified and directed. Note :- Rates for replacement of gaskets, SS nuts, SS bolts, washers, etc are deemed to be included in the item rate. |
| 49 | All as item no 48.00 above but 60 to 7.5 HP. |
| 50 | Material and labour for repairing and brazing wherever required with copper rod for rotor assembly of motor 300/280/250/200 HP capacities of motor including grinding, cleaning, varnishing and testing complete all as specified and directed. |
| 51 | All as item no 50.00 above but 75/60/50/40/30 HP |
| 52 | All as item no 50.00 above but 25/20/15/12.5/7.5 HP |
| 53 | Material and labour for repairing, metal filling, turning and grinding on lathe machine shafts of .300/280/250 HP capacity pump sets complete all as specified and directed |
| 54 | All as item no 53.00 above but 75/60/50/40/30 HP |
| 55 | All as item no 53.00 above but 25/20/15/12.5/7.5 HP |
| 56 | M&L for replacement of gland packing suitable for pump set 200 HP to 100 HP complete with removing worn out gland, cleaning etc. complete all as speciifed and directed. |
| 57 | M&L for replacement of gland packing suitable for pump set 100 HP to 7.5 HP complete with removing worn out gland, cleaning etc. complete all as speciifed and directed. |
| 58 | M & L for attending fire main line breakdown with 12 hours to complaint of any size 80mm to 300mm including taking out old pipe and fixing new pipe including fittings as per site requirement and necessary site work like excavation, returning filling, removal,welding, blanking etc. complete all as speciifed and directed. |
| 59 | Supply and fix in repair/replacement of Soft Starter for 200/250 HP Motor, 415V, 50 Hz complete all as speciifed and directed. |
| 60 | Supply and fix in repair/replacement of Star Delta Starter for 60/75 HP Motor, 415V, 50 Hz complete all as speciifed and directed. |
| 61 | Supply and fix in repair/replacement of Star Delta Starter for 12.5/10/7.5 HP Motor, 415V, 50 Hz complete all as speciifed and directed. |
| 62 | Supply anf fix in repair direct on line (DOL) starter 3 phase 415 Volts 7.5 hp to 05 HP capacity. complete all as speciifed and directed. |
| 63 | Taking down and dismantling centrifugal pump sets of 300/280/250/200 HP capacity installed at various water supply installations for servicing/overhauling,greasing and and replacement of minor parts are deemed to be included in this rete complete all as specified and directed. |
| 64 | All as item no 63.00 above but 150/75/60/50/ HP Capacity complete all as specified and directed. |
| 65 | All as item no 63.00 above 15/12.5/7.55 HP capacity complete all as specified and directed. |
| 66 | M & L for repairing/ refurbishment of bell mouth/distance piece of existing dewatering pump including opening up the pump and refixing the same after repair for 280/250/200 HP capacity complete all as specified and directed. |
| 67 | All as item no 66.00 above but 100/120/150 HP |
| 68 | All as item no 66.00 above but 75/60/50/ HP |
| 69 | All as item no 66.00 above but 15/12.5/7.55 HP |
| 70 | S& F in repair heavy duty sluice valves of 300 mm bore ISI marked flanged end, cast iron body, flanged and drilled and non rising type brass spindle with nut, long body, class PN 1.6, conforing to IS 14846 of 2000 for following sizes including all flange joint with rubber or fiber board, bolts, nuts and washers complete including pumping out accumulated water all as specified and directed of following size. complete all as specified and directed. |
| 71 | All as item no 70.00 above but 250mm bore |
| 72 | All as item no 70.00 above but 200 mm bore |
| 73 | All as item no 70 .00 above but150 mm bore |
| 74 | All as item no 70.00 above but 100 mm bore |
| 75 | Supply & lay in repair 300mm bore cast iron pipes with spigot and socket/ flanged end type\\" centrifugally cast class `LA' in any length laid in trenches of following sizes. |
| 76 | All as item no 75.00 above but 250mm bore |
| 77 | All as item no 75.00 above but 200mm bore |
| 78 | All as item no 75.00 above but150mm bore |
| 79 | All as item no 75.00 above but 100mm bore |
| 80 | Supply & lay in repair 300 mm bore cast iron Non return valve ISI marked with spigot and socket/ flanged end type\\" centrifugally cast class `LA' in any length laid in trenches of following sizes. |
| 81 | All as item no 80.00 above but 250 mm bore |
| 82 | S& F in repair 200 mm bore Raising Valve of CI body ISI marked class PN 16, conforing to IS 14846 of 2000 all as specified and directed |
| 83 | S& F in repair 250 mm bore Raising Valve of CI body ISI marked class PN 16, conforing to IS 14846 of 2000 all as specified and directed Please Enable Macros to View BoQ information |
| 84 | S& F in repair 250 mm bore Raising Valve of CI body ISI marked class PN 16, conforing to IS 14846 of 2000 all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender