Tender For Provn Of Façade Lighting At P-11 Bldg At Nom Varuna And Provn Of Electrical Cabling (Xlpe) From Chanakya Bagh Sub Station To Ncs Delhi Under Ge New Delhi
Tender Value
Ref. Documents
Estimated cost
Bid Submission
19 Aug 2026
4 days left
EMD
98816
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Façade Lighting At P-11 Bldg At Nom Varuna And Provn Of Electrical Cabling (Xlpe) From Chanakya Bagh Sub Station To Ncs Delhi Under Ge New Delhi
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE NEW DELHI Name of Work: PROVN OF FAÇADE LIGHTING AT P-11 BLDG AT NOM VARUNA AND PROVN OF ELECTRICAL CABLING (XLPE) FROM CHANAKYA BAGH SUB STATION TO NCS DELHI UNDER GE NEW DELHI Contract No: GE/ND-85/2025-26 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Supply, Installation, testing & Commissioning of 1000 mm long rigid architectural RGBW LED Linear light suitable for AC Supply with housing of extruded alminium alloy & Die cast aluminium nd caps. The luminaire shall have applied polyester powder coating finish. The Luminaire's integrated brackets shall be made of extruded aluminium & the same shall be so designed that the luminiare can be tilted +95 degrees. The luminaire shall have silicon glue between optical cover & LED chamber to ensue IP66 Protection. The fixture shall have sutiable beam angle as required & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK07 rated clear tempered glass. The LEDs shall have minimum CRI>80 and shall have SDCM<3. The fixture shall come with power & DMX cable of minimum 100 mm length. The fixture shall be installed with IP67 connectors. THe luminaire shall have system wattage not exceeding 40 W & system lumen Output of at least 1100 lumens. The Fixture should have a life class of 50000 burning hours at L70 @35 Degree Celsius. The luminaire should be compatible with DMX512 Controller. The lumiaire shall automatically addressable using hand held device. The Lumiaire shall be capable of 8 bit control of RED, Green, Blue & White to produce 16.7 million colors complete all as specified and directed.Make : Lustre GLIDE Luminiare Li-92042-36/ Havells Color Line or equivalent in Iguzzini/We-ef/ LED- Linear |
| 3 | Supply, Installation, testing & Commissioning of 1000 mm long rigid architectural RGBW LED Linear light suitable for AC Supply with housing of extruded alminium alloy & Die cast aluminium nd caps. The luminaire shall have applied polyester powder coating finish. The Luminaire's integrated brackets shall be made of extruded aluminium & the same shall be so designed that the luminiare can be tilted +95 degrees. The luminaire shall have silicon glue between optical cover & LED chamber to ensue IP66 Protection. The fixture shall have sutiable beam angle as required & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK07 rated clear tempered glass. The LEDs shall have minimum CRI>80 and shall have SDCM<3. The fixture shall come with power & DMX cable of minimum 100 mm length. The fixture shall be installed with IP67 connectors. THe luminaire shall have system wattage not exceeding 40 W & system lumen Output of at least 1100 lumens. The Fixture should have a life class of 50000 burning hours at L70 @35 Degree Celsius. The luminaire should be compatible with DMX512 Controller. The lumiaire shall automatically addressable using hand held device. The Lumiaire shall be capable of 8 bit control of RED, Green, Blue & White to produce 16.7 million colors complete all as specified and directed.Make : Lustre GLIDE Luminiare Li-92042-36/ Havells Color Line or equivalent in Iguzzini/We-ef/ LED- Linear |
| 4 | Supply, Installation, testing, Commissioning of 5 mtr rolls of high performance flexible linear RGBW Neon Luminaire including dirver made of silicon rubber extrusion with high transparency, tensile strength & UV stability. The lumniare shalle be of horizontal bend type with dimensions not exceeding 16 mm x 1 6 mm suitable for uniform linear facade illumination. The fixture shall operate on 24 V DC constant Voltage supply and should consume not more than 18 W/m. It shall consist of RGBW high brightness LEDs & efficacy at Color level of >15 lm/W. The luminaire shall be individually addressable via DMX512 protocol capable of 10 pixels/m. The lumniare shall be IP67 rates for protection against dust and water & shall be resistant to salt, weak acid/alkali corrosion & UV Radiation. It shall gutable segments at 125 mm intervals and allow DMX512 compatibility. The Neon Flex shall exhibit uniform optical light distribution, with no visible LED dots or shadows maintaining consistent brightness throughout its length. The luminaire shall have a minimum service life class of 50000 hours @ L70 complete all as specified and directed.Make : Havells FLEXEA or equivalent in Iguzzini/ We-ef/ LED Linear/ Lustre. |
| 5 | Supply, installation, testing & Commissioning of RDM-6 Wall DMX Splitter & Booster is a 6-output DMX/RDM splitter with DMX/ RDM pass-through supporting b-directional communications for discovery, addressing & DMX control. This unit takes the incoming DMX/RDM signal & Splits the signal into six seperate output channels, allowing for expanding the number of devices controlled from 32 to 6 x 32. The output terminals are electronically isolated from the input & RDM through port & share a common ground reference. All six outputs have an independent output driver to boost the DMX/RDM signal complete all as specified and directed.Make: Havells DMX Splitter 8 Way or equivalent in Iguzzini/We-ef/ LED-Linear/ Lustre. |
| 6 | Supply, installation, testing & Commissioning of DMX controller with compatibility to control minimum 4 DMX512 universes, playback scenes, and animations stored in its SD Card, and it can be used for offline scenes schedulling, setting brightness, white balance & playback speed adjustments. It should be able to amplify the DMX signal in cascaded connection & support automati playback schedulling. It should support power-on start up and scheduling start along with the capability of unended operation. It should be housed in Aluminium Casing. The Input voltage shall be 12 V DC and shall have 2 RJ45 ports on input side. The IEC Classification shall be class III. It shpould operate on DMX512 protocol. The output shall have 8X 3P lockable terminals. The power consumption shall be 8 W. The Controller should have provision for SD card slot if required. THe controller shall come with 220-240 V to12 V DC power supply. The DMX controller shall be of the same make as that of facade Lighting lumniares. The working temeprature shall be - 30 to 50 Degree Celsius complete all as specified and directed.Make: Havells DMX Controller or equivalent in Iguzzini/We-ef/ LED Linear/ Lustre. |
| 7 | Programming for lighting management system includes addressing for all smart lighting fixture along with mapping on connected system. All fixture to be programmed as per the site requirement. Min 5 Scenes to be created & configure on smart keypad for ease of operation of smart light system complete all as specified and directed.Make : Iguzzini/We-ef/Led-Linear/Lustre/HavellsNote: (a) The work has to be executed through OEM/OEM authorised agency only. (b) The contractor must sign bid specific MoU with the OEM for execution of work through OEM/OEM authorised agency.(c) The contractor must submit the copy of the MoU signed with OEM at the time of submission of Technical bid, failing which his technical bid shall be summarily rejected. |
| 8 | Supplying,fabrication, installation, testing and commissioning of LT panel not less than 3mm thick made out of modular polycarbonate thermoplastic enclosures outdoor type, factory made CPRI approved, floor mounting type, environment friendly, recyclable, UV resistant, halogen and silicon free, anti-acid and anti corrosive, IP-65 Protection in accordance with IEC 60529, 24 hrs astronomical time switch, auto/ manual selector switch, ON/OFF push buttons. The gasket material shall be plyurethane while the gas/ket shall be internally embedded including suitable working space suitable for 3 phase 4 wire system 415V, 50HZ, AC supply and fixed on raised PCC base 1:2:4, type B1 (20mm graded aggregate) raised base with cable glands, phase indicators, internal wiring, CT of suitable Ratio, digital voltmeter and ammeter, air passing holes with proper spacing to accommodate to all control switches and other accessories, cable connections with suitable size of lugs/thimble etc including suitable size canopy to cover the panel with proper fixing arrangement including excavation and earth work complete all as specified and directed and comprising the followings.Incoming :(a) MCB 32 Amps, 4 Pole - 01 No(b) Power contactor - 32 Amps(c) Surge protection device - 01 No(d) RYB Indicating lamp(e) Digital Voltmeter and ammeter of suitable rating(f) Start/stop Push Button -1 No(g) Over voltage/under voltage relay - 01 NoOutgoing:(a) MCB DP, 32 Amps, 2 pole - 02 Nos |
| 9 | Supply, laying, testing and commissioning of 2 runs x 4 sqmm copper flexible cable for power supply to the fixure complete all as specified and directed by Engineeer-in-Charge. Make : Havells/Polycab/RR Kabel |
| 10 | Supply, laying, testing and commissioning of 2 runs x 2.5 sqmm copper flexible cable for power supply to the fixure complete all as specified and directed by Engineeer-in-Charge. Make : Havells/Polycab/RR Kabel |
| 11 | S&F PVC conduit pipe of size 25mm suitable for passing cable complete all as specified and directed by Engineer-in-Charge. |
| 12 | S&F CAT6A Armoured cable complete all as specified and directed by Engineer-in-Charge. |
| 13 | Supply, installation, testing and commissioning of single phase voltager stabilizer of capacity 05 KVA, Minimum input voltage 90-130V, minimum output voltage130V, maximum output voltage 290-300 Volts including digital display, digital indicators, over volt protection and overload protection complete all as specified and dorected by Engr- In- Charge. |
| 14 | S&F factory made concealed sheet steel distribution boards, double door, SPN, 12 way, 230 volts AC, IP 43 with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing complete all as specified and directed. |
| 15 | S&F MCB DP 32 Amps, 240 Volts, 10 KA, `B' curve, all as per site requirement complete all as specified and directed by Engr-in-Charge. |
| 16 | S&F MCB SP 6 to 32 Amps, 240 Volts, 10 KA, `B' curve, all as per site requirement complete all as specified and directed by Engr-in-Charge. |
| 17 | M&L for Earthing complete with galvanized steel earth plate 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate n.less than 1.5 m below normal ground level, connected to galvanized iron wire 4 mm as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints as shown in drgs and including excavation and earth work, GI pipe light grade 25mm bore of protection of GI wire from earth electrode, supply and laying charcoal dust, common salt, PCC (1:2:4) type B-1 Chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B-1using 20 mm graded stone aggregate Reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia , PGI funnel and wire mesh , 20 mm dia GI Pipe light grade for watering complete all as specified and directed by Engr-in-Charge. |
| 18 | Supply and fixing of AL profile(1m) complete all as specified and directed. |
| 19 | S&F IP67 suitable sizes Junction boxes with necessary accessories complete all as specified and directed.Make : Legrand/Precision/Sintex/Havells |
| 20 | S&F connection for looping of Data, IP67 of suitable sizes with necessary accessories complete all as specified and directed. Make : Havells/Lusture/Precision/Sintex |
| 21 | Excavation in trenches n.exc 1.5 mtr wide and n exc 1.5 mtr in depth and not exceeding 10 Sqm area on plan and getting out in soft/ loose soil for laying cables, etc complete all as specified and directed. |
| 22 | Returning, filling including spreading, levelling, watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed by Engr in charge. |
| 23 | Removing surplus excavated soil n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed. |
| 24 | Supply, laying, testing and commissioning of XLPE LT cable size of 240 Sqmm x 3.5 core 1100 volts grade heavy duty with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC Tape armoured with galvanized steel strip or wire and over all PVC Sheathed stranded conductor conforming to IS-7098 (Part-I) with latest amendments laid in tranches/ fixed to wall/ pole/ laid in floor including necessary connections and suitable size of thimbling and minor consumables spares like thimbles, bakelite board etc for connection shall be included in the quoted rate complete all as specified and directed by Engineer-in-Charge.Note: (a) Cable to be laid under hardstanding area/ interlocking tiles fixing area/ under road or other hard surface.(b) Contractor is advised to visit site before quoting the tender(c) The repair cost of interlocking tiles removal and refixing, road cutting and making good, hardstanding area excavation and refilling is deemed to be included in quoted rate, nothing extra to be paid on this account.(d) Excavation, earth work, sand cushioning, brick protection and pipe shall be measured and paid separately under appropriate item of this schedule.Make: Havells/ Polycab/ KEI/ RR Kabel |
| 25 | M&L for Brick Sub Class 'B' locally available best quality laid in trenches with width equal to length of the bricks, above sand cushioning for cable protection complete all as specified and directed. |
| 26 | M&L for sand cushioning with clean dry sand for protection of under ground cable complete all as specified and directed.Note :- Punned thickness of sand layer shall be measured and paid to contractor.Note: (a) Srl Item No 01.00 to 03.00, 05.00 to 07.00, 11.00, 18.00 & 23.00 of BOQ are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody.(b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender