Tender For Lifting Of Pump, Jacketing Of Damaged Column Pipe, Reinstallation & Commissioning Of 30 Cusec Capacity Vt Pump No. F At Mominpur Dps Under Bdps.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Aug 2026
9 days left
EMD
2700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Lifting Of Pump, Jacketing Of Damaged Column Pipe, Reinstallation & Commissioning Of 30 Cusec Capacity Vt Pump No. F At Mominpur Dps Under Bdps.
BOQ
| Sl. No. | Item Description |
| 1 | TOTAL |
| 2 | Disconnect power cable from motor terminal box after necessary precaution. Decouple line shaft and head shaft and dismantle motor after dismantling thrust block, thrust bearing and lock nut. Lift the motor and keep it safe position the floor as per direction of EIC. |
| 3 | Lift the pump after disconnecting from discharge bend. Dismantle column pipe, shaft enclosing guard pipe, pump shafts, diffuser, bell mouth, impeller and other accessories step by step and rest them on the floor neatly as per direction of EIC. |
| 4 | 10 mm thick M.S plate as per IS:2062-2011 make SAIL/TATA for surface development of 600 mm dia. 1 mt. long pipe cut into 2 segments for jacketing column pipe and 12 mm thick stiffeners around flanges and base plate considering 15 % extra metal for waste of material due to cutting and edge preparation for welding. |
| 5 | Welding in M.S structural work with flux coated electrode (b) continuous welding along pipe seam and around flanges and stiffeners.After root run, weave electrode so that metal fuses uniformly on both plates for every subsequent run. Remove slag and clean weld bead by chipping hammer and wire brush after every run. |
| 6 | Mechanical cleaning of column pipe before jacketing damaged portion of column pipe. |
| 7 | Hire fitter |
| 8 | Hire Gas Cutter |
| 9 | Beveling edge of 10 mm plate for single-V butt joint. Included angle is 70 degrees. Leave 3 mm square surface at bottom on both edges for root run. |
| 10 | Pipe rolling 10mm MS plate in pipe bending machine |
| 11 | Sand blasting of column pipe surfaces thoroughly to remove rust and to create surface texture to adhere primer. |
| 12 | Apply Zinc phosphate primer on the blast surface after cleaning the surface. |
| 13 | Mix branded Epoxy resin and hardener in the ratio by volume or weight as per recommendation of manufacturer of paint. Stair well the mixture for uniform and consistent mixture and wait few minutes to let bubbles come out of mixture. Apply the mixture on the primer coated surface by roller. Wait 24 hours for drying before applying next coat. Allow 6/7 days to dry after finish paint for curing of paint and adherence of paint to the surface for durability. |
| 14 | Lower repaired column pipe and flange join with gasket. Assemble diffuser, bell mouth, impeller with pump shaft. Join pump shaft, line shaft with threaded socket coupling. Install pump on the base plate and tighten nuts & bolts. Connect pump discharge with discharge bend and gate valve. |
| 15 | Install pump motor on the stool. Couple line shaft with head shaft by flexible coupling with perfect alignment. Assemble thrust block, thrust bearing and lock nut on top of the motor. Connect power cable with motor terminal box. Conduct trial run to ensure smooth running. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender