Tender For special Repair To Road/Berms From Offrs Qtr Road To Helipad At Chaubattia Mil Station Under Ge Mes Ranikhet.
Tender Value
48.43 Lakhs
Estimated cost
Bid Submission
21 Aug 2026
20 days left
EMD
96900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Almora → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Road/Berms From Offrs Qtr Road To Helipad At Chaubattia Mil Station Under Ge Mes Ranikhet.
BOQ
| Sl. No. | Item Description |
| 1 | Preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and directed. |
| 2 | M & L for applying evenly a priming/tack coat with bituminous primer Paving bitumen) VG-10 @ 5 kg per 10 sq metre on existing blak top surfaces complete all as specified and directed. |
| 3 | M & L for Semi Dense Bituminous premix asphaltic dense concrete 30mm consolidated thickness with 5.5% binder content of VG-30 by weight of total mix, rolled and compacted to required camber and gradient complete all as specified and directed. |
| 4 | Scarifying or picking gravelled macadam or bituminous macadam surfaces in area not exc 400 sqm exc 50mm and n exc 100deep complete all as specified and directed. |
| 5 | M&L for applying evenly a priming/tack coat with bituminous primer (Paving bitumen) VG -10 @ 10 Kg per 10 Sqm on unsurfaced water bound macadam including preparing surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and directed. |
| 6 | M & L for Premix bituminous, macadam laid/rolled and compacted to required gradient and camber and camber with paving bitumen VG-30 content of 4% by weight of toal mix (consolidated thickness 75mm or less) for correction of undulation/ camber complete all as specified and directed. |
| 7 | M&L for Demolition of hard core/soiling in ground floors and berms etc., complete all as specified and directed. |
| 8 | M&L for Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level), complete all as specified and as directed by Engr-in-Charge. |
| 9 | M&L for 150 mm thick (spread thickness) soiling (or sub base) with broken boulders or quarried stones (granite or trap or basalt stones) of size rang 100 mm to 150 mm, deposited, spread, levelled in one layer, interstices filled, surface formed, rolled and consolidated to required gradient and camber with 8 to 12 tonne power roller, complete all as specified and as directed. |
| 10 | M&L for Dismantling Stone slabs and tiles of any description, interlocking paver block laid and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 11 | M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub-base to flooring & apron etc. complete all as specified and directed. |
| 12 | M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. |
| 13 | Supply & fixing in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and as directed. |
| 14 | Supply and fixing in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. |
| 15 | M & L for laying hot applied thermoplastic compound (paint) 2.5mm thick including reflecting glass beads incl cost of all materials, labour, machinery, T & P etc required for proper completion of work incl all other charges. Th e finished surfaces to be level, uniform and free from streaks and holes as per MORTH specification No 803 as per IRC. Painting lines, dashes, arrows, letters etc on roads, pavements and the like exc 10cm wide with road marking paint white, golden or yellow complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender