Tender For Cleaning And Repair To Area Drainage, Sewage System Including Septic Tank By Mechanical Means Under Zone B & E Under Ge Chennai.
Tender Value
35 Lakhs
Estimated cost
Bid Submission
21 Aug 2026
15 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Cleaning And Repair To Area Drainage, Sewage System Including Septic Tank By Mechanical Means Under Zone B & E Under Ge Chennai.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches n. exc 1.5m wide and n. exc 1.5m deep for foundation, or for shafts, wells, cesspits, manholes, pier holes etc, n. exc 10 sqm on plan getting soft/loose soil complete all as specified and as directed. |
| 2 | Returning filling in foundation including leveling watering and well ramming in layers not exc 25cm using excavated soil all as directed. Note:- For sewage line removal of surplus earth shall not be measured and shall be mounted over refilling. |
| 3 | Removing excavated soil to a distance exc. 50m and n.exc 250m and depositing where directed at a level n.exc 1.50m above the starting point and all as directed. |
| 4 | Desilting of covered drains/culverts of any size and depth including removal of mud/soil/grass and removal/refixing of cover slabs on drain/culvert etc. and disposal of spoil outside the MD land complete all as specified and directed |
| 5 | Cleaning of sewage sump of any depth by dewatering and removal of sludge by honey sucker machine and application lime washing inside the sumps complete all as specified and directed. |
| 6 | Cleaning of choked water closed/gully trap/floor trap of bathroom/kitchen/ washbasin upto first manhole complete all as specified and directed by Engineer-in-charge. Note : (i) collection of compliant slip from compliant cell from AGE B/R-II office. The time of completion of job 24 hours after detailment. If failed to complete the compliant a fine of Rs.500/- per day per complaint shall be affected from the contractor's dues. |
| 7 | Cleaning of maholes any size and not exceeding 1.5m depth including lifting, removing sludge, water and cleaning with water including cutting grass, vegetation and bushes to a width of 60cm all around manholes complete all as specified and directed. |
| 8 | All as per item ser No.07 above here-in-before but manholes of depth exceeding 1.5m but not exceeding 3.00m in depth . Note : The sludge and water obtained while cleaning of manholes shall be removed with mechanical sucker machine to out side MD land. the rates quoted for items shall include the above provision also. |
| 9 | Roding and cleaning of sewage pipe line with jet roding machine by mechanical means with jet pressure pump of 100mm dia sewage lineof any depth between gully traps & maholes/two adjoining manholes and removing all foreign materials and sludge completely from the pipe line and making the line fuctional complete including making accessibilty along the manholes/sewage line all as specified and directed. |
| 10 | All as per item No.09 above, but for 150mm bore pipe. |
| 11 | All as per item No.09 above, but for 200mm bore pipe. |
| 12 | Puncturing SWG pipe of 150mm internal dia for clearing blockages and sealing with piece of pipe and concreting around the pipe including necessary excavation complete all as specified and directed |
| 13 | All as per item No 12 above but 200mm dia pipe Note : The rate quoted shall be deem to include necessary excavation, and earth work in any type of soil, returning and filling complete all as specified and directed |
| 14 | Precast cover slab 1:2:4, type B1 using 20mm graded stone aggregate in landings, cover slabs (for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 for manholes including demolition of existing cover slabs complete all as specified and directed |
| 15 | M&L for plain mild steel TMT bars 6 to 8mm dia and over, cut to length bent to shape required including cranking, bending, spirally hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips of grade FE410-W (Gde E-250) quality or FE 290 (Gde E-165) complete all as specified and directed. |
| 16 | Demolition of brick masonary built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stone work, precast concrete articles and disposing off the rubbish debris outside MD land complete all as specified and directed. |
| 17 | Taking down cement plaster on brick work or concrete surfaces etc including racking out joint, hacking for key, scrubbing down with water etc, and removing the debris outside MD land complete all as specified and directed. |
| 18 | M & L for brick work with flyash bricks straight or curved on plan exc 6m mean radius with old size brick built in cement mortar (1:4) complete all as specified and as directed. |
| 19 | M & L for rendering 15mm thick in CM 1:4 on fair faces of brick/concrete surface finished fair and even without using extra cement complete all as directed. |
| 20 | M & L for rendering 15mm thick in CM 1:6 on fair faces of brick/concrete surface finished fair and even without using extra cement complete all as directed. |
| 21 | Material and Labour for plain cement concrete (1:2:4) type B1 using 20mm graded stone agrregate as in coping, including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed. |
| 22 | M & L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in concrete bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested in 110mm dia PVC(SWR) pipe line complete all as specified and as directed. |
| 23 | M & L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in concrete bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested in 150mm dia PVC(SWR)/NP3 pipe line complete all as specified and as directed. |
| 24 | S&F for PVC (SWR) pipes of 110mm dia inner bore single socketed in any length with rubber rings, laid in trenches and set in solvent including set in cement mortar demolition and breaking up existing drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and as directed. |
| 25 | S&F for PVC (SWR) pipes of 150mm dia inner bore single socketed in any length with rubber rings, laid in trenches and set in solvent including set in cement mortar demolition and breaking up existing drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and as directed. |
| 26 | Reinforced concrete pipe class NP3 of 150mm bore laid and jointed ncluding demolition and breaking up existing drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and as directed. |
| 27 | M & L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in concrete bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested in 200mm dia NP3 pipe line complete all as specified and as directed. |
| 28 | Reinforced concrete pipe class NP3 of 200mm bore laid and jointed ncluding demolition and breaking up existing drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and as directed. |
| 29 | M&L for PCC 1:2:4 type B-2 using 20mm graded crushed stone aggregate in surface channels and drains including necessary formwork complete all as specified and as directed. |
| 30 | SFRC (Steel fibre reinforced concrete) manhole cover with frame of size 70cm x 70cm x 40/50 mm thick edge protected with MS Steel flat including reinforcement, welding and laying etc fixing directly to opening of manholes complete all as specified and directed. |
| 31 | SFRC (Steel fibre reinforced concrete) manhole cover with frame of size 85cm x 85cm x 40/50 mm thick edge protected with MS Steel flat including reinforcement, welding and laying etc fixing directly to opening of manholes complete all as specified and directed. |
| 32 | S&F in repair of PTMT grating doom 100mm dia (minimum weight 25gms) including takingdown / demolition of existing complete all as directed by Engineer-in-Charge. |
| 33 | S&F in repair for CP Cockroach trap (127mm x 127mm) with waste hole complete all as specified and directed. |
| 34 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm dia including breaking the existing pipe complete all as specified. |
| 35 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75mm dia including breaking the existing pipe complete all as specified. |
| 36 | Supply and Fix PVC (SWR) bend any radius suitable for 110mm dia pipes. |
| 37 | Supply and Fix PVC (SWR) bend any radius suitable for 75mm dia pipes. |
| 38 | S&F PVC SWR branch piece single 'Y' equal or unequal 110mm bore with access door. |
| 39 | S&F PVC SWR branch piece single 'Y' equal or unequal 75mm bore with access door. |
| 40 | Supply and Fix PVC (SWR) Vent cowl suitable for 110mm dia vent pipe. |
| 41 | Supply and Fix PVC (SWR) Vent cowl suitable for 75mm dia vent pipe. |
| 42 | Cutting into existing manhole for connecting new drains and drains and making good to pipes and rendering cutting out existing benching for and forming branching for and forming branch channel (1/2 round or 3/4 section ) in PCC 1:2:4 type B-1 using 20 mm graded cushed stone aggregate smooth finished and reforming benching as specified and directed for 150 mm dia of pipe complete all as specified and directed. |
| 43 | Cutting into existing manhole for connecting new drains and drains and making good to pipes and rendering cutting out existing benching for and forming branching for and forming branch channel (1/2 round or 3/4 section ) in PCC 1:2:4 type B-1 using 20 mm graded cushed stone aggregate smooth finished and reforming benching as specified and directed for 100 mm dia of pipe complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender