Tender For General-Dysp Quarters Bhakthivilasam-Construction Of Dysp Quarters,Bhakthivilasam, Thiruvananthapuram - Arrangement Of Wardrobe Works In Kitchen And Bed Rooms-General Civil Work
Tender Value
57.56 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvananthapuram → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Dysp Quarters Bhakthivilasam-Construction Of Dysp Quarters,Bhakthivilasam, Thiruvananthapuram - Arrangement Of Wardrobe Works In Kitchen And Bed Rooms-General Civil Work
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 05-Aug-2026 | Change in EPAC | Other | 10-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL |
| 2 | 50.9.11.2:Providing and fixing Thomson Multi wood board or equivalent make paneling 18 mm thick, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately)as per the direction of site Engineer-in-charge. |
| 3 | OD97402/2026-2027:Providing and fixing Thomson Multi wood board or equivalent make paneling 10 mm thick, to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid separately) as per the direction of site Engineer-in-charge. |
| 4 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) |
| 5 | 21.1.2.1:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium ( anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) |
| 6 | OD98613/2026-2027:Suppling and fixing 4 mm thick ACP Sheet including fixing charges etc complete |
| 7 | OD99702/2026-2027:Providing and fixing Departmental aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portion Powder coated Departmental aluminium (minimum thickness of powder coating 50 micron) |
| 8 | OD99700/2026-2027:Suppling and fixing Departmental 4 mm thick ACP Sheet including fixing charges etc complete |
| 9 | OD99701/2026-2027:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) Departmental Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 10 | 9.90.4:Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.Size 75 mm |
| 11 | 9.91:Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. |
| 12 | 9.114.1:Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters, including fixing with necessary screws etc. complete.Triple strip vertical type |
| 13 | 9.114.2:Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters, including fixing with necessary screws etc. complete.Double strip (horizontal type) |
| 14 | 9.115:providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer -in-charge. |
| 15 | 9.171:Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. |
| 16 | 9.172:Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge. |
| 17 | OD97404/2026-2027:Providing and fixing ISI marked SS handles conforming to IS : 4992 with necessary screws etc. complete:125 mm |
| 18 | OD97403/2026-2027:Engaging Man labour -Coolie |
| 19 | OD97405/2026-2027:Providing and fixing Stainless Steel Oval Closet Hanger Rod for Hanging Clothes in Wardrobe With End Supports with screws etc., wherever necessary complete : 20 mm dia |
| 20 | 17.32.4:Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm |
| 21 | OD99838/2026-2027:Engaging Man labour - Welders |
| 22 | OD100301/2026-2027:Supplying and fixing Kitchen stainless steel cup and saucer basket17''x20''x6'' including fixing charges etc complete |
| 23 | OD100302/2026-2027:Supplying and fixing Kitchen stainless steel Thali basket 17''x20''x8'' including fixing charges etc complete |
| 24 | OD100303/2026-2027:Supplying and fixing stainless steel plain basket17''x20''x6'' including fixing charges etc complete |
| 25 | OD100304/2026-2027:Supplying and fixing stainless steel plain basket17''x20''x8'' including fixing charges etc complete |
| 26 | OD100305/2026-2027:Supplying and fixing Kitchen stainless steel Cutlery basket 17''x20''x4'' including fixing charges etc complete |
| 27 | OD100363/2026-2027:Supplying and fixing stainless steel pull out 17''x20''x6'' including fixing charges etc complete |
| 28 | OD100372/2026-2027:Supplying and fixing Slim Tandem Box For Kitchen Cabinet 8 ''x 20'' including fixing charges etc complete |
| 29 | OD100373/2026-2027:Supplying and fixing Slim Tandem Box For Kitchen Cabinet 6 ''x 20'' including fixing charges etc complete |
| 30 | OD100374/2026-2027:Supplying and fixing Slim Tandem Box For Kitchen Cabinet 4 ''x 20'' including fixing charges etc complete |
| 31 | OD100385/2026-2027:Supplying and fixing SS 304 (Stainless Steel) GTPT 600 mm Cabinet Width including fixing charges etc complete Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 10, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender