Tender For Provn Of Metallic Shed With Lighting Arrangement For Housing Dsrv Simulators At Op Facility, Sru (W) At Mankuhrd Under Ge (Nw) Mankhurd.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
22 Aug 2026
14 days left
EMD
46500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Metallic Shed With Lighting Arrangement For Housing Dsrv Simulators At Op Facility, Sru (W) At Mankuhrd Under Ge (Nw) Mankhurd.
BOQ
| Sl. No. | Item Description |
| 1 | Excaution in trenches n exc 1.5m wide and n exc 1.5m depth, for foundation, etc. or for shafts, wells, cessipts, manholes, etc. n exc 10 Sqm on plan and n ecx 1.5 m in depth and getting out soft/ disintegrated soil, complete all as specified and directed. |
| 2 | Excaution in trenches n exc 1.5m wide and exc 1.5m and n exc 3m depth, for foundation, etc. or for shafts, wells, cessipts, manholes, etc. n exc 10 Sqm on plan and n ecx 1.5 m in depth and getting out soft/ disintegrated soil, complete all as specified and directed. |
| 3 | Removing excavated material beyond 5 km upto total distance of 15 km and depoting where directed complete all as specified and directed. |
| 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed by EIC. |
| 5 | M&L for PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) as in foundation, filling and mass concrete including necessary form work if required complete all as specified and directed by EIC. |
| 6 | M&L for cast-in-situ Plain Cement concrete type B1 1:2:4 (20mm graded aggregate) foundation blocks of size 1.5mx0.6mx0.6m complete all as specified and directed. |
| 7 | M&L for 75mm thick Plain Cement concrete type B1 1:2:4 (20mm graded aggregate) complete all as specified and directed. |
| 8 | M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and matt beams sides and soffits (if any) of foundation and plinth beams; and similar work ; vertical or to batter ,flat surfaces complete all as specified and directed by EIC. |
| 9 | M&L Forrnwork to sides of pillars. posts. struts. piers. columns and stan- rchions for fair finished surfaces of concrete,square,rectangular or polygonal complete all as specified and directed by EIC. |
| 10 | M/L for RCC M30 (Design mix) in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns,etc.; basement slabs,under-reamed piles and mass concrete complete all as specified and directed by EIC. |
| 11 | M/L for RCC M30 (Design mix) in columns, pillars, plers.posts and struts complete all as specified and directed by EIC. |
| 12 | M&L for TMT FE 500D bars 10 mm and over cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to all as specified. complete all as specified and directed by EIC. |
| 13 | -Ditto- as per item above but, 5 mm dia and over and incl 10mm dia in stirrups, spacers and binders. Complete all as specified and directed by EIC. |
| 14 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed by EIC. |
| 15 | S&F Fe 410 -W (Gde-E- 250) quality-A Rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and directed by EIC. |
| 16 | S & F Fe 410 -W (Gde-E- 250) quality-A Rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed by EIC. |
| 17 | S & F Mild steel screw bolts (machine made) of 5 to 10 mm dia of neck with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long,but length of bolt exc 5cm and n exc 10cm long complete all as specified and directed by EIC. |
| 18 | S & F Mild steel screw bolts (machine made) of 16 to 20 mm dia of neck with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long,but length of bolt exc 22.5cm and n exc 30cm long complete all as specified and directed by EIC. |
| 19 | M&L Preparation of New or previously untreated Surfaces of any description, over 10cm in width or girth,not otherwise described and apply two coat of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and as directed by EIC. |
| 20 | S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified upto height of 10 mtr complete all as specified and directed by EIC. |
| 21 | S&F Pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified upto height of 10 mtr complete all as specified and directed by EIC. |
| 22 | M&L for Rendering 15 mm thick cement plaster 1:4 in two coats (10+5 mm) on fair faces of brick work or concrete surfaces including finishing the surface of top layer even and smooth, complete all as specified and directed by EIC. |
| 23 | M & L three coats of white wash on newly plastered walls surfaces including preparation of surfaces complete all as specified and directed. |
| 24 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 4 core |
| 25 | Excavation in trenches not exceeding 1.50 m wide and n.exc 1.5 m in depth for foundation of poles, cable etc, not exc 10 sqm on plan and getting out in soft/loose soil including taking out brick protection etc complete all as specified and directed. |
| 26 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified and directed. |
| 27 | Removing excavated materials (soils) not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed. |
| 28 | M & L for sand cushioning by spreading in trenches crushed sand by gently by punning down manually as in cable protection all as specified and as directed by Engineer -in-charge. |
| 29 | Supply and laying un-reinforced precast concrete cable cover class LV, type-I, flat size 250 mm x 150 mm x 40 mm laid in trenches all as specified.Make: Mehtab tiles/ National |
| 30 | M&L for sub main wiring with two single core 2.5 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade down in through PVC conduit with and including PVC insulated 1.5 Sqm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly including taking down old unserviceable submain wiring complete all as specified and as directed |
| 31 | Supply & fix very high efficiency round LED Highbay light fittings 140 Watt in PDC housing, IP 66 luminaire including driver and required GI tube down road of length up to 2 meter with hoooks for hanging the fitting including fixing arrangements and taking down old rusted bracket fittings complete etc. Please Enable Macros to View BoQ information |
| 32 | Supply & fix very high efficiency round LED Highbay light fittings 140 Watt in PDC housing, IP 66 luminaire including driver and required GI tube down road of length up to 2 meter with hoooks for hanging the fitting including fixing arrangements and taking down old rusted bracket fittings complete etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender