Tender For Smart Periodical Services To Md & Otm Accn Of Dhangu And Bhadoriya Mil Complex Under Ge (South) Pathankot
Tender Value
1 Crore
Estimated cost
Bid Submission
29 Aug 2026
20 days left
EMD
1.75 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Smart Periodical Services To Md & Otm Accn Of Dhangu And Bhadoriya Mil Complex Under Ge (South) Pathankot
BOQ
| Sl. No. | Item Description |
| 1 | M&L for rendering 15mm thick in two layers (base layer 10mm & finishing layer 5mm thick) in cement mortar (1:4) using liquid water proofing compound in finishing layer on brick work or concrete surfaces of wall, surfaces finished even and smooth without using extra cement including taking down cement or cement lime plaster of any description and raking out joints, hacking for key, scrubbing down with water and removal of rubbish, out off the premises, etc complete all as specified & directed.(Note : WPC shall be measured and paid separately) |
| 2 | Supply only liquid water proofing compund complete all as specified and directed. |
| 3 | M & L for water proof cement based putty @ 1 kg (undiluted) per Sqm of average thickness 1mm over the newly plastered surface of wall/Ceiling and sanding of the putty surface with mechanical wall sander (with mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc by skilled labour complete all as specified and directed. |
| 4 | M&L preparation of old plastered surfaces of wall/Ceiling/ roof projections including facia, cornices etc by scrapping with mechanical sander (with mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit of dia 7\\"/9\\" to make free from dust, loose paint etc and apply one coat of water proof cement based putty @ 1 kg (undiluted) per Sqm of average thickness 1mm over the old plastered surface of wall/Ceiling and sanding of the putty surface with mechanical wall sander (with mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc by skilled labour complete all as specified and directed. |
| 5 | M & L for applying one coat of acrylic water based Exterior grade primer on prepared putty surfaces of wall/roof/ceiling @0.9 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. |
| 6 | M&L for applying weather proof two coats of water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent dirt pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti-Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water for each coat as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed. |
| 7 | Preparation of old painted wooden surfaces of any descrition exc 10 cm width or girth and applying one coat of synthetic enamel paint all as directed. |
| 8 | Preparation of old painted steel surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint all as directed. |
| 9 | Preparation of old painted steel surfaces of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint to change tint complete all as directed. |
| 10 | M&L for obliterating old writing of any description, not exceeding 0.1 sqm each, with one coat of synthetic enamel paint to match exisiting work, including writing building 'Numbers' with paint, complete all as specified & directed. |
| 11 | M & L for taking out Plants / vegetation, digging out roots, filling cracks/holes with CM 1:2 and levelling off surfaces to match the existing surface on walls, chajjas etc exe. 7 mtr height complete all as specified & directed. |
| 12 | M&L liquid water proofing treatment to RCC roof slab incld dismantling of existing treatment of any description in following procedure : (a) Laying 10mm thick rendering in Cement mortar 1:4 mixed with WPC 3% by weight of cement on fair faces of concrete roof surfaces , finished even and fair to receive treatment on roof Complete (b) Applying first coat fiber reinforced elastometic liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with sun reflective index (SRI) of 100-110, having minimum elongation of 350%, tensile strength 2.9 Mpa and shall have reack bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure reduce surface temperature upto 10 degree celsius with 3.3% dilution as priming coat (c) laying of fiber mesh 0.3mm thickness weave in leno pattern having weight 4.5 gm/ Sqm and pasting it properly with overlap of 50mm and allow it to dry (d) Applying second coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge (e) Applying third and final coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge. (The rate includes for filling cracks in existing roof with cement putty using suitable bonding agent (shalcrate 42) before laying cement plaster) |
| 13 | Demolition of Concrete of any description (unreinforced) and in any position complete all as specified & directed. |
| 14 | M&L for 25mm thick roof padding in cement concrete type B-0 1:2:4 using 12.5mm graded aggregate, mixed with liquid water proofing compound @ 200 ml per bag of cement, finishing cement concrete surface even and smooth using extra cement complete all as specified and directed. |
| 15 | M&L 40 mm thick brick tiles bedded in cement mortar (1:6), 15mm thick and joints grouted flush including T- pointing in cement mortar (1:3) mixed with 5% of cruded oil by weight of cement including dismantling old UNSV brick tiles and removal of old tiles/rubbish, out off the premises, etc complete all as specified & directed. |
| 16 | M&L for rendering dubbing coat over damaged irregular surface of chajjas roof projections ceiling facia etc average 15mm thick in cm 1:4 over cement slurry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even& smooth incl making of drip course as reqd complete incl roughening surface of old concrete by picking sweeping clean and washing with water all as specified. Note :Rate for form work if reqd to be incl in the rate quoted by the contractor. |
| 17 | Disconnecting existing PVC tanks exc 250 and upto 500 ltrs capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. |
| 18 | S&F for rotational moulded polyethylene water storage tanks three layer of capacity 500 litre, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm ball valve high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball etc complete including taking out existing water tanks of any description all as specified & directed. |
| 19 | S&F for rotational moulded polyethylene water storage tanks three layer of capacity 1000 litre, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm ball valve high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball etc complete including taking out existing water tanks of any description all as specified & directed. |
| 20 | Taking down existing surface/concealed water tubing 15mm bore and refixing in same/new location after cleaning and application of bituminous paint on concealed portion of tubing including cutting & threading pipe and provision of additional fittings such as socket, tee, elbow, union etc complete all as specified and directed.(Note : Cutting chases and making good shall be measured and paid separately) |
| 21 | Taking down existing surface/concealed water tubing 20mm bore and refixing in same/new location after cleaning and application of bituminous paint on concealed portion of tubing including cutting & threading pipe and provision of additional fittings such as socket, tee, elbow, union etc complete all as specified and directed.(Note : Cutting chases and making good shall be measured and paid separately) |
| 22 | Taking down existing surface/concealed water tubing 25 to 32mm bore and refixing in same/new location after cleaning and application of bituminous paint on concealed portion of tubing including cutting & threading pipe and provision of additional fittings such as socket, tee, elbow, union etc complete all as specified and directed.(Note : Cutting chases and making good shall be measured and paid separately) |
| 23 | GI water tubing surface/concealed, 15mm bore, medium grade galvanized with all fittings (such as tee, elbow, socket, union, short pieces) and application of bituminous paint on concealed portion of tubing, fixed to wall or ceiling or laid in floor, including taking down existing unserviceable GI tubing and connections etc complete all as specified and directed.(Note : Cutting chases and making good shall be measured and paid separately) |
| 24 | GI water tubing surface/concealed, 20mm bore, medium grade galvanized with all fittings (such as tee, elbow, socket, union, short pieces) and application of bituminous paint on concealed portion of tubing, fixed to wall or ceiling or laid in floor, including taking down existing unserviceable GI tubing and connections etc complete all as specified and directed.(Note : Cutting chases and making good shall be measured and paid separately) |
| 25 | GI water tubing surface/concealed, 25 to 32 mm bore, medium grade galvanized with all fittings (such as tee, elbow, socket, union, short pieces) and application of bituminous paint on concealed portion of tubing, fixed to wall or ceiling or laid in floor, including taking down existing unserviceable GI tubing and connections etc complete all as specified and directed.(Note : Cutting chases and making good shall be measured and paid separately) |
| 26 | Cutting chases not exceeding 10cm in width/girth for concealed water tubing or concealed conduit wiring etc and refilled chases with cement concrete 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate and finally making good in cement mortar 1:3 to match existing surface etc complete all as specified and directed. |
| 27 | S&F in repairs PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or floor/wall complete all as specified & directed of following sizes :- |
| 28 | (a) 110mm bore |
| 29 | (b) 75mm bore |
| 30 | S&F in repairs PVC (SWR) bends any radius 75mm bore complete all as specified and as directed. |
| 31 | S&F in repairs PVC (SWR) bends any radius 110mm bore complete all as specified and as directed. |
| 32 | S & F repair of Toilet Duct Pipelines for Soil Water Down take pipe fixing done with Pipe Supporting Clamping System having Mono Bracket + U Bolt System - 1. Soil Water Pipe 4\\" PVC - 2 pipe running from Terrace to Ground Floor Vertical Fixed line with wall distance 3\\": Pipe Support Clamping made of 1. Mono Bracket with Slot Wall Distance 3\\" for 4\\" PVC pipe made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 48 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs. 2. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing as per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty.: 1. Mono Bracket with Slot Wall distance 3\\" for 4\\" PVC pipe - 1 Nos. 2. U Bolt R/M for 4\\" PVC Pipe Dia. - 1 Nos. and 3. Justi Khilla GI coated 2 1/2\\" - 2 nos. Pipe Support Clamping Unit fixing to be done at every metre distance in the duct as specified. |
| 33 | Notes:- (a) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Cement base paint, Putty etc. is proposed to be used by the contractor. (b) The bulk material of approved make will be deposited at respective office and will be issued on daily basis by Engr-in-Charge.(c) Tint/shade of exterior/interior emulsion shall be approved by GE.(d) All painted area/site is to be cleaned by contractor and hand over to user as earlier without any extra cost to Govt.(e) The Schedule of Credit amount shall be deducted from the total of this schedule (BoQ) to arrive at Contract Sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender