Tender For Repair And Maintenance Of Bop Hautch In Aor Of 162 Bn Bsf Under Shq Bsf Coochbehar.

Sharing tender

Tender For Repair And Maintenance Of Bop Hautch In Aor Of 162 Bn Bsf Under Shq Bsf Coochbehar.- 1 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : Old Work (One Or More Coat Applied @ 0.90 Ltr/10 Sqm). 2 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. 3 Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690 Gms. 15 Mm Nominal Bore 4 Renewing Glass Panes, With Putty And Nails Wherever Necessary Including Racking Out The Old Putty: Float Glass Panes Of Nominal Thickness 4 Mm (Weight Not Less Than 10Kg/Sqm). 5 Providing And Fixing Ptmt Swivelling Shower, 15 Mm Nominal Bore, Weighing Not Less Than 40 Gms 6 Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm(Thickness To Be Specified By The Manufacturer), Of 1St Quality Conforming To Is : 15622, Of Approved Make, In All Colours, Shades, Except White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Bed Of Cement Mortar1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @3.3Kg/Sqm Including Pointing The Joints With White Cement And Matching Pigments Etc., Complete. 7 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 8 Providing And Fixing Water Closet Squatting Pan (Indian Type W.C.Pan ) With 100 Mm Sand Cast Iron P Or S Trap, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever) Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required: White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With Integral Type Foot Rests 9 Add Cost Index @ 10.28 % Dsr 2023 10 Gst Correction Factor @ 0.973 11 Providing And Fixing Aluminium Handles Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade With Necessary Screws Etc. Complete : 125 Mm 12 Providing And Fixing Ptmt Bib Cock Of Approved Quality And Colour. 15Mm Nominal Bore, 86 Mm Long. Weighing Not Less Than 88 Gms. 13 Providing And Fixing Factory Made P.V.C. Door Frame Of Size 50X47 Mm With A Wall Thickness Of 5 Mm, Made Out Of Extruded 5Mm Rigid Pvc Foam Sheet, Mitred At Corners And Joined With 2 Nos Of 150 Mm Long Brackets Of 15X15 Mm M.S. Square Tube, The Vertical Door Frame Profiles To Be Reinforced With 19X19 Mm M.S. Square Tube Of 19 Gauge, Epdm Rubber Gasket Weather Seal To Be Provided Through Out The Frame. The Door Frame To Be Fixed To The Wall Using M.S. Screws Of 65/100 Mm Size, Complete As Per Manufacturer’S Specification And Direction Of Engineer- In-Charge. 14 Providing And Fixing Factory Made Panel Pvc Door Shutter Consisting Of Frame Made Out Of M.S. Tubes Of 19 Gauge Thickness And Size Of 19 Mm X 19 Mm For Styles And 15X15 Mm For Top & Bottom Rails. M.S. Frame Shall Have A Coat Of Steel Primers Of Approved Make And Manufacture. M.S. Frame Covered With 5 Mm Thick Heat Moulded Pvc C Channel Of Size 30 Mm Thickness, 70 Mm Width Out Of Which 50 Mm Shall Be Flat And 20 Mm Shall Be Tapered In 45 Degree Angle On Both Side Forming Styles And 5 Mm Thick, 95 Mm Wide Pvc Sheet Out Of Which 75 Mm Shall Be Flat And 20 Mm Shall Be Tapered In 45 Degree On The Inner Side To Form Top And Bottom Rail And 115 Mm Wide Pvc Sheet Out Of Which 75 Mm Shall Be Flat And 20 Mm Shall Be Tapered On Both Sides To Form Lock Rail. Top, Bottom And Lock Rails Shall Be Provided Both Side Of The Panel. 10 Mm (5 Mm X 2 ) Thick, 20 Mm Wide Cross Pvc Sheet Be Provided As Gap Insert For Top Rail & Bottom Rail, Paneling Of 5 Mm Thick Both Side Pvc Sheet To Be Fitted In The M.S. Frame Welded/ Sealed To The Styles & Rails With 7 Mm (5 Mm+2 Mm) Thick X 15 Mm Wide Pvc Sheet Beading On Inner Side, And Joined Together With Solvent Cement Adhesive. An Additional 5 Mm Thick Pvc Strip Of 20 Mm Width Is To Be Stuck On The Interior Side Of The C Channel Using Pvc Solvent Adhesive Etc. Complete As Per Direction Of Engineer-In-Charge, ManufacturerS Specification & Drawing. 30 Mm Thick Plain Pvc Door Shutters 15 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm Ptmt Pillar Cock, 32 Mm Ptmt Waste Coupling Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required. White Vitreous China Flat Back Wash Basin Size 550X400 Mm With Single 15 Mm Ptmt Pillar Cock. 16 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C. Waste Fittings Complete. Semi Rigid Pipe 32 Mm Dia 17 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 15 Mm Nominal Outer Dia Pipes 18 Providing And Fixing Ptmt Hand Spray (Health Faucet) Of Approved Quality As Per Direction Of Engineer-In-Charge