Tender For Repair & Renovation Of Staff Quarter At Old Shahi Fort, Jaunpur
Tender Value
91.82 Lakhs
Estimated cost
Bid Submission
20 Aug 2026
19 days left
EMD
2.29 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kushi Nagar → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Renovation Of Staff Quarter At Old Shahi Fort, Jaunpur
BOQ
| Sl. No. | Item Description |
| 1 | Provision for the Vegetation Clearance, Cleaning jungle including uprooting of rank vegetation, grass, brush wood, Small trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 2 | Provision for Earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 3 | Provision for Providing and laying in position cement concrete of specified grade 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering – All work up to plinth level. |
| 4 | Provision for Brick work with Cement mortar 1:6 (1 cement: 6 coarse sand) common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth. |
| 5 | Provision for Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 6 | Provision for Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5 mm nominal size). |
| 7 | Provision for Brick work with Cement mortar 1:6 (1 cement : 6 coarse sand) common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in. |
| 8 | Provision for 12 mm thick cement plaster in 1:4 (1 cement: 4 fine sand) complete in all respect. |
| 9 | Provision for Finishing with Delux Multi Surface paint system for interiors and exteriors using Primer as per manufactures specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer [email protected] ltr/10 sqm. |
| 10 | Provision for M.S. gate of size 3.00mx2.00m of double leaf with 50 x 50 x 5mm size MS angle and16 mm square bar including cutting, hoisting, fixing in position and making bhala at top of each 16mm square bar and locking arrangement, hinges with supply of all T&P etc required for proper completion of work. |
| 11 | Provision for Providing and fixing MS grill size 2.40m x 1.20m with 50 x 50 x 5mm size MS angle , 50 x 5mm MS Flat and 16 mm square bar including all cutting fixing nut bolt, hinges etc. required for completion of work with primer coat of red oxide painting over MS work including supply of T&P etc. required for proper completion of work. |
| 12 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture. |
| 13 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) Usage/Application Water Cooling Brand Aqua soft Type Cold Cooling Capacity120 LPH Warranty1 Year Body Material Stainless Steel Number Of Taps2 Weight150 kg Dispenser Single Dispenser Total Power1.5 kW Coin Operated Rs. 1,2,5,10 Dispensing300 ml,500 ml,1 ltr,2 ltr,5 ltr to 20 ltr Dimension 6.5 x 3.5 x 3.5 feet Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender