Tender For Maintanence Of Bore Well With Hdpe Tank In Nambali Junction At Ward No.11 In Kollancode Municipality.
Tender Value
3.70 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
18 days left
EMD
3700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanniyakumari → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintanence Of Bore Well With Hdpe Tank In Nambali Junction At Ward No.11 In Kollancode Municipality.
BOQ
| Sl. No. | Item Description |
| 1 | Drilling of bore well of size 150mm (4\\" to 5\\") sedimentary formation using hand base sets including insertion of casing pipes etc. including and packing of pebbles and coveyancce of hand bore set including loading and uploading. |
| 2 | Supply and delivery of following bore well casing pipes and specials |
| 3 | 110 mm PVC casing pipe |
| 4 | 150 mm PVC casing pipe |
| 5 | 140 mm bore end cap |
| 6 | Supply and delivery of Submersible motor pump set with starter for erection into the bore well with a duty conditioning 15 lpm 125 metre head including all charges etc. |
| 7 | Supply and delivery of 1.5 HP wall mounting type control panel board of Ammeter, Voltmeter single phase prevents insulator-indicating lambs, star DOL/Starter. Suitable for 2 HP suitable certificate pump set including all charges. |
| 8 | Supply and delivery of flat type 4 sq mm PVC sheathed 3 core conductor cables cablesconforming to IS 694 / 1990 with ISI marking suitable for submersible pumb sets etc completed. |
| 9 | Supply and delivery of following PVC/GI pipes and specials |
| 10 | 40 mm 'U' PVC pipe |
| 11 | 40 mm GI elbow |
| 12 | 40 mm GI hex nipple |
| 13 | 40 mm GI union |
| 14 | 40 mm GM non return valve |
| 15 | 40mm GM Gate valve |
| 16 | 50mm PVC pipe |
| 17 | 40mm GI pipe |
| 18 | 40mm GI Bend |
| 19 | 40mm GI Coupling |
| 20 | 32mm GM Gate valve |
| 21 | 32mm GI Pipe |
| 22 | 32mm GI Bend |
| 23 | 50mm GI pipe |
| 24 | 75mm PVC Pipe |
| 25 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum |
| 26 | Earth work excavation for foundation and depositing on bank with in the initial lead of 10 m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc completed complying with SS 20B. TNDSS No.23&24 |
| 27 | Cement concrete of mix 1:4:8 (one cement four sand and eight aggregates) using 40 mm gauge machine broken granite stone jelly for foundation including de watering if found necessary and laid in layers of not more than 15 cm thick well rammed and consolidated etc complying with standard specification. TNDSS No.28 |
| 28 | Brick work in cement mortar 1:5 (one cement and five sand) using country bricks of size 8¾\\"x4¼\\"x2¾\\" including curing, cost and conveyance of all materials to site and all labour charges etc complete as per standard specification |
| 29 | Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of 75mm thick in RCC M20 concrete using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed. |
| 30 | Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors. |
| 31 | Manufacturing supplying and fixing of MILD STEEL DOOR made out of 50 x 50 x 6 mm M.S angle for outer frame,35 X 35 X 5mm M.S.Angle for outer frame of shutter. The entire shutter area shall be covered with CRC sheets (18 G) with 5Nos, of stiffners using M.S.Flats of size 25 X 6mm at equal intervals horizontally. The corners of the frames and shutter with CRC sheets shall be welded by adopting flash butt welding or any other suitable method. Provision towards 3Nos, of Hinges incase of single shutters / 6Nos,of Hinges incase of Double shutters of 125 X 31 X 1.25mm size placed at appropriate intervals and provisions shall be made for Tower bolts 2Nos, Aldrop 1No. The frame shall be provided with 6Nos,of Hold fast of 200mm length using 50 X 6mm M.S.Flat. The entire frame and shutter shall be provided with one coat of red oxide primer including cost of hold fasts,hinges, locking arrangements, handles wind appliences etc., complete and as directed by the departemental officers. |
| 32 | Plastering walls with cement mortar 1:5 mix (one cement and five sand) 12 mm thick including all cost and conveyance of all materials and all labour charges for curing and all other incidental charges etc., complete as per standard specification. TNDSS No.61 |
| 33 | Painting two coats with ready mixed plastic exterior emulsion paints of first class quality and of approved colour over a priming coat including through scraping clean removal of dirt etc, complete and including cost of necessary plaster of paris, putty, brushes, wherever required and all labour charges, scaffolding charges etc, complete as per standard specification. |
| 34 | Supply and delivery of fixing of HDPE tank 1000 litres capacity as per IS 12701/1996 including loading, unloading, transportation and labour charges for fixing of GI pipes and specials for pipe connection works including cutting, threading and fixing chargers as directed by officers.(Pg.89) |
| 35 | Supply and fixing of 32A TPN metal clad switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing |
| 36 | Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2\\" x 1-1/2\\" x 1/4\\" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 63A fuse units (500V), 1 No. neutral link, copper earth flat of size 1\\" x 1/4\\" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete SD 125 |
| 37 | Supply and run of 2 of 4sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V on 7/20 GI bearer wire for service connection mains |
| 38 | Labour charges for the erection of submersible pump set in bore well / open well including fixing and jointing submersible cable with proper clamps up to the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, of panel board consisting of TPICN switches starter, coltmeter, Ammeter, three pilot (indicating) lanps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pump set and trail run for 10 days. |
| 39 | Lowering 40mm PVC pipes and specials to trench and laying to proper grade and alignment and as directed by the TWAD Officers |
| 40 | Refilling the excavated earth including all cost etc Complete as per standered specification. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender