Tender For Dismantling Of Road And Reinstatement Of Road, Pipe Line Commissioning And Other Appurtenant Work In Zone Cw-02 Saraimeeta Zps Under 15Th Finance Commission Programme Nagar Nigam Kanpur
Tender Value
1.65 Crore
Estimated cost
Bid Submission
14 Aug 2026
13 days left
EMD
1.66 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanpur Nagar → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Dismantling Of Road And Reinstatement Of Road, Pipe Line Commissioning And Other Appurtenant Work In Zone Cw-02 Saraimeeta Zps Under 15Th Finance Commission Programme Nagar Nigam Kanpur
BOQ
| Sl. No. | Item Description |
| 1 | Excavation of trenches in all type soil for pipe line with lift up to 1.5 m lead up to 50 m including filling back, watering and ramming of excavated earth in to the trenches and removeal and disposal of surplus earth upto 10 km within muncipal limit from the center of the excavated trenches with royality given to other department.In Ordinary Soils 60% |
| 2 | In Mixed Soils 40% |
| 3 | Supply of following size of D.I.D./F sluice valve and scour valves of various size given below including all taxes, railway freight, insurance charge, carting, loading, unloading & stacking, etc. complete.DID/F Sluice valve (IS Code- 14846:2000)350 mm dia |
| 4 | Same as Item no.5 but for Scour valve 100 mm dia |
| 5 | Same as Item no.5 but for Air valve 80mm dia PN-6 |
| 6 | Carting of following size of sluice valves and scour valves from store to site of work, lowering in already prepared trenches and fixing them in position including cost of jointing materials and proper completion of work.DI D/F Sluice valve IS Code- 14846:2000350 mm dia |
| 7 | Same as Item no 6 but for Scour valve 100 mm dia |
| 8 | Same as Item no.6 but for Air valve 80 mm PN-6 |
| 9 | Provide all materials and labour T & P etc. required for proper completion of work for construction of following chambers.Sluice valve chamber masonary type Size(2.0mx1.5mx1.9m) |
| 10 | Sluice valve chamber masonary type Size(1.0mx1.5mx1.5m) |
| 11 | Air valve chamber (350mmx350mmx500mm) |
| 12 | Dismantling of following types of road, stacking of serviciable materials, disposal of unservicialbe materials from site of work.Bitumen road |
| 13 | C.C. road |
| 14 | Interlocking |
| 15 | Construction of bitumen road as per UPPWD specification including supply of all materials, labour, T&P etc. required for proper completion of work as per following thickness:-GSB (One coat) (90-40 mm) = 250 MMWBM (45-63 mm) = 230 MMDBM (One coat) = 50 MMBC (One coat) = 30 MM |
| 16 | Laying of 80mm thick paver block road using new tiles over 40 mm thick sand cusion & bedding of 100mm thick 1:4:8 PCC work including supply of all materials, labours T&P etc complete. |
| 17 | Reinstatement of CC road surface with laying of PCC 1:4:8, 100mm thick cement, sand & 20mm stone ballast 1:2:4, 150mm including supply of all materials, labours T&P etc complete.. |
| 18 | Supply and filling of Granular Sub base Bedding in trenches from a distance not exceeding 10Km from the site of work including watering, ramming, dressing etc and also including the cost of all materials, labours, T&P etc required for proper completion of works. |
| 19 | Supply of local sand with Royalty charges and filling into trenches including all materials, labours,T&P etc all required for completion of work. |
| 20 | Making nala crossing coming on the alignment of pipe line including dismentling of CC of brick work, making hole as per requirement and supply of all labour, T&P etc. complete as per direction of engineer incharge excluding cost of D.I. pipe and specials supplied by department. on Avg. 2.0 m width250mm to to 400mm Dia For DI Pipe |
| 21 | Repairing of leakage in existing various dia of GRP pipe line including excavation of earth and cutting of pipe line , bailing out of water insertion of new piece of pipe specials,joints etc and also including all labour T&P etc complete for proper completion of work as per Engineer in-charge. 350 mm dia |
| 22 | Repairing of leakage in existing various dia of PSC pipe line including excavation of earth and cutting of pipe line , bailing out of water insertion of new piece of pipe specials,joints etc and also including all labour T&P etc complete for proper completion of work as per Engineer in-charge. 350 mm dia |
| 23 | Making CC Thrust Block to support pipe etc. including supply of all material and labour also 1:1.5:3 PCC over pipe line for cover etc. all complete. |
| 24 | Fabrication of MS pipe for gap closing & specials with 10mm thick MS sheet including rolling of sheet in required size carting to site of work and welding at site etc including all materials,labours,T&P etc all required for completion of work. |
| 25 | Hiring Charges of painted M.S. Board for barricading of size (2m X 1.8m) Glow-caution boards,Red color radium striups along its all sides with writing all necessary cautions and department name etc all complete for saftey purpose (both side of trenches will be taken as one side.) |
| 26 | Renovation of ZPS such as water tightness of C.W.R and O.H.T including repairing of drain, floor, plaster work, painting work including all materials, labours, T&P etc all required for completion of work as per instruction of Engineer in charge. Existing 1600KL/22m OHT |
| 27 | Existing 1000KL CWR |
| 28 | Existing PH/LT/HT/Meter Room |
| 29 | E&M WorksRepairing, servicing, and overhauling of Biecco Lawrie make HT Panel comprising one incomer and two outgoing VCBs, including replacement of all damaged vacuum interrupters, anti-pumping relay, IDMT relay, earth fault relay, CT/PT unit, control wiring, busbars, insulators, power pack, and other required components. The work shall include dismantling, loading, unloading, transportation, reassembly, painting, testing, and commissioning of the panel under load at site, complete in all respects, as directed by the Engineer-in-Charge. |
| 30 | Supply and laying of 70 sq.mm HT XLPE Cable from the HT metering cubicle to the HT panel and from the HT panel to the transformer, including HT termination kits, complete as per relevant IS standards and Electrical Installation Rules. |
| 31 | TransformerDesign, Supply, Installation, Testing and Commissioning of 160 KV/0.433, star rated Copper wound distribution Transformer ( All the distribution transformer must be star rated as per notification of (BEE) ministry of power, Goverenment of India) of following rating 160/0.433KV Delta-Star Connected, Vector Group Dyn 11, ONAN Cooled & as per BEE star level & BIS approved as per IS 2026-1977 & losses as defined as per IS 1180 part (I) 2014 including standard accessories like conservator, silica gel breather,Bucholz relay, radiator, fins, HT cable box & LT cable boxes, Off -LTC (+5% to - 15% @ 2.5%) temperature rise of 40 degree C in oil / 45 degree C in winding , ISI marked drain valve, Dial type Temperature gauge, OTI & WTI, marshalling box, first filling of transformer oil as per IS :335-1953, Epoxy based paint. |
| 32 | Servicing, overhauling, and repairing of 400 A LT Control Panel comprising two incomers and one outgoing feeder, including replacement of damaged MCCBs, busbars, voltmeter, ammeter, indicating lamps, selector switches, control wiring, and other necessary components. The work shall include dismantling, transportation, reassembly, painting, testing, and commissioning under load, complete as directed by the Engineer-in-Charge. |
| 33 | Supply, installation, testing, and commissioning of 400 A Automatic Phase Reversal Unit with built-in time delay and enclosure, conforming to IEC 60947-1 and IEC 60947 standards, complete in all respects. |
| 34 | Supply and laying of 3.5 Core × 185 sq.mm, 1.1 kV grade, XLPE insulated, armoured aluminium conductor LT cable, conforming to IS 7098 (Part-1) and IS 8130, from the transformer to the Main LT Panel, including all accessories, laying, termination, testing, and commissioning. |
| 35 | Servicing, overhauling, and repairing of 400 A Motor Control Panel comprising one incomer and three outgoing feeders, including replacement of damaged MCCBs, busbars, voltmeter, ammeter, indicating lamps, control wiring, and other necessary components. The work shall include dismantling, transportation, reassembly, painting, testing, and commissioning under load, complete as directed by the Engineer-in-Charge. |
| 36 | Supply, installation, testing, and commissioning of 50 HP Soft Starter, complete with all accessories, suitable for the specified motor application. |
| 37 | Supply and laying of 3 Core × 16 sq.mm, 1.1 kV grade, XLPE insulated copper conductor cable from the Motor Control Panel to the Soft Starter and from the Soft Starter to the Motor, including termination, testing, and commissioning, complete in all respects. |
| 38 | Supply, installation, testing, and commissioning of 50 HP, IE3 efficiency, squirrel cage induction motor, 415 V, 3 Phase, 50 Hz, IP55 protection, suitable for 4100 LPM at 34 m head horizontal split casing centrifugal pump, complete with all accessories and manufacturer's test certificates. |
| 39 | Servicing, overhauling, repairing, testing, and commissioning of the existing Flowmore make horizontal split-case centrifugal pump having a discharge capacity of 4100 LPM at 34 m total head, including dismantling of the pump, inspection of all components, replacement of damaged/worn-out bearings, shaft sleeves, wear rings, gland packing/mechanical seal, coupling rubber bushes, cooling pipes, nuts, bolts, gaskets, and other defective parts as required. The scope of work shall also include dynamic balancing of the rotating assembly, alignment of pump and motor, painting, transportation (if required), reassembly, testing, trial run, and commissioning under full load conditions. The work shall be carried out complete in all respects, including all labour, tools, tackles, consumables, and incidental materials, as directed by the Engineer-in-Charge. |
| 40 | Supply, Installation, Testing & Commissioning of 200 mm dia DIDF Electrically integrated actuater (Totally enclosed, weather-proof and dust proof construction with IP-67, protection class suitable for installation in any position without lubrication, leakage or other operational difficulty with special grease filled gear box and suitable for manual operation for emergency which will automatically dis-engage on restoration of power to motor and with 10 watt single phase space heater and continuous local mechanical position indicator and individually replaceable counter gear assembly and with two torque and four limit switches with S.S. flap and operated with gear driven cams and of rating 250 Volt, 5 Amp, AC/DC, torque switch dial and with TEFC squirrel cage induction) operated knife edge gate valve suitable to SCADA operation Valves are suitable for hydrostatic test pressure of 10Kg./Cm2 for seat and 15Kg./Cm2 for body(PN-1.0) of following sizes suitable for water applications |
| 41 | Supply, Installation, Testing & Commissioning of 250 mm DIDF Electrically integrated actuater (Totally enclosed, weather-proof and dust proof construction with IP-67, protection class suitable for installation in any position without lubrication, leakage or other operational difficulty with special grease filled gear box and suitable for manual operation for emergency which will automatically dis-engage on restoration of power to motor and with 10 watt single phase space heater and continuous local mechanical position indicator and individually replaceable counter gear assembly and with two torque and four limit switches with S.S. flap and operated with gear driven cams and of rating 250 Volt, 5 Amp, AC/DC, torque switch dial and with TEFC squirrel cage induction) operated knife edge gate valve suitable to SCADA operation Valves are suitable for hydrostatic test pressure of 10Kg./Cm2 for seat and 15Kg./Cm2 for body(PN-1.0) of following sizes suitable for water applications |
| 42 | Supply, Installation, Testing & Commissioning of 300 mm dia DIDF Electrically integrated actuater (Totally enclosed, weather-proof and dust proof construction with IP-67, protection class suitable for installation in any position without lubrication, leakage or other operational difficulty with special grease filled gear box and suitable for manual operation for emergency which will automatically dis-engage on restoration of power to motor and with 10 watt single phase space heater and continuous local mechanical position indicator and individually replaceable counter gear assembly and with two torque and four limit switches with S.S. flap and operated with gear driven cams and of rating 250 Volt, 5 Amp, AC/DC, torque switch dial and with TEFC squirrel cage induction) operated knife edge gate valve suitable to SCADA operation Valves are suitable for hydrostatic test pressure of 10Kg./Cm2 for seat and 15Kg./Cm2 for body(PN-1.0) of following sizes suitable for water applications |
| 43 | Design, manufacture, supply, installation, testing, and commissioning of Blind Flange of the specified size, conforming to IS standards and matching the pipeline pressure rating. The Blind Flange shall be fabricated from high-quality material with suitable drilling, complete with nuts, bolts, washers, rubber insertion gasket, and all accessories required for installation. The item shall include transportation, handling, fitting, alignment, hydrostatic testing (where applicable), and commissioning, complete in all respects, as directed by the Engineer-in-Charge. |
| 44 | Design, manufacture, supply, installation, testing, and commissioning of a portable 2 H.P Singlr phase submersible dewatering pump of the specified capacity, complete with TEFC electric motor, delivery hose, power cable, guide rope, starter/control panel, and all standard accessories. The pump shall be suitable for continuous operation in sewage/wastewater applications and shall be capable of handling solids as specified. The scope of work shall include transportation, installation, testing, trial run, commissioning, and satisfactory performance at site, complete in all respects, including all labour, tools, tackles, consumables, and incidental materials, as directed by the Engineer-in-Charge (1W+1S) |
| 45 | Design, manufacture, supply, installation, testing, and commissioning of a 2-Ton Chain Pulley Block complete with load chain, hand chain, forged hooks with safety latches, geared trolley (where specified), and all standard accessories. The Chain Pulley Block shall conform to the relevant IS standards and shall be suitable for safe lifting, lowering, and handling of pumps, motors, and other equipment at the pumping station. The scope of work shall include transportation, installation, testing, load testing, commissioning, and satisfactory operation at site, complete in all respects, including all labour, tools, tackles, consumables, and incidental materials, as directed by the Engineer-in-Charge. |
| 46 | Supply, Installation, Testing & Commissioning of CE/UL Certified pressure transmitter CE markd with following technical parameters at water Pump and Interfacing with PLC panel includingmounting arrangement. Output 4-20 mA / HART Power supply - 24V DC ext. Display - 4\\" LEDAccuracy - +/- 0.1 % of full scale or better Enclosure- IP 68 |
| 47 | Supply, installation, commissioning of CE/UL Full bore Electromagnetic Flow Meter of approved make of following dia and specifications complete: Media : Water (Raw/ Chlorinated) , Pressure : up to 1.0 MPa, Process temp: - 50 deg C, Flow/Meter Tube : SS 304, Electrode : SS AISI 316L / Hastelloy C276/ Tantalum, Lining Material : Hard Rubber/ Neoprene / Poly-urethane (PU) , Flange : SS / CS, Flange Standard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Càst Aluminium, with anticorrosive paint & provide completely sealed (leak proof) construction as per requirement of IEC 60529, Accuracy : + 0.5 % M.V.- velocity 0.3 to 10 m/s, Transmitter/ signa convertor Enclosure : Die Cast Aluminium, Power Supply : 80240 V AC - 5OHz, Output 1 : 4-20 mA, Output 2: Pulse, Communication Output : RS 485/ Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parameters and totalizer value during power failure, Protection category- IP 68 for sensor (flow tube) and IP 68 for transmitter/ convertor, including Surge Arrester, cable (size - 300 mm dia at common header) |
| 48 | Design, manufacture, supply, installation, testing, and commissioning of the complete campus electrification system, including LED street lights/solar street lights (as specified), poles, mounting brackets, junction boxes, control panel, cables, conduits, earthing system, foundations, cable laying, terminations, and all associated accessories. The work shall include civil works required for pole foundations, wiring, interconnections, testing, trial run, and commissioning of the entire lighting system. All materials shall conform to the relevant IS/IEC standards and approved specifications. The system shall be handed over in complete working condition, including all labour, tools, tackles, transportation, consumables, and incidental materials, complete in all respects, as directed by the Engineer-in-Charge |
| 49 | Supply, Installation, Testing & Commissioning of CE/UL cirtified of Radar type level transmitter CE marked with following technical parameters at Raw Water Pump House and Interfacing with PLC panel including mounting arrangement.Output-4-20 mA / HART Power supply - 24V DC ext. Display - 4\\" LEDRange- 0 to …30... mtrsAccuracy - +/- 0.25% of Full Scale or better Enclosure- IP 68. |
| 50 | Oiling greasing, painting of common header reflux valve, delevery reflux valve etc.Preparation of all exposed metallic surfaces by thoroughly removing rust, old paint, dust, grease, and other foreign materials using mechanical/manual methods, followed by the application of one coat of approved metal primer and two coats of synthetic enamel paint of approved shade over all structural steel members, pipelines, valves, pumps, motors, panels, and other equipment, as directed by the Engineer-in-Charge. The work shall include all labour, materials, scaffolding, tools, tackles, surface preparation, painting, finishing, and incidental works required to complete the job in all respects, conforming to the relevant IS specifications.Preparation of all exposed metallic surfaces by thoroughly removing rust, old paint, dust, grease, and other foreign materials using mechanical/manual methods, followed by the application of one coat of approved metal primer and two coats of synthetic enamel paint of approved shade over all structural steel members, pipelines, valves, pumps, motors, panels, and other equipment, as directed by the Engineer-in-Charge. The work shall include all labour, materials, scaffolding, tools, tackles, surface preparation, painting, finishing, and incidental works required to complete the job in all respects, conforming to the relevant IS specifications. |
| 51 | Repairing of earthing for HT panel, Transformers, LT panel, pumpset starter and motor control panel with required suitable size GI strip and other required material etc. The earth resistance shall be measured after Repairing work and shall comply with the relevant IS 3043 standards and project specifications. The item shall include all labour, materials, tools, tackles, transportation, testing, and commissioning, complete in all respects, as directed by the Engineer-in-Charge. |
| 52 | Design, manufacture, supply, installation, testing, and commissioning of MS chequered plate covers of the specified size and thickness for cable trenches, complete with suitable MS angle frame, stiffeners, lifting handles, hinges (where required), and all necessary hardware. The chequered plate and supporting frame shall be properly fabricated, welded, surface prepared, and finished with one coat of zinc-rich primer and two coats of approved synthetic enamel paint, or hot-dip galvanized where specified. The scope of work shall include cutting, fabrication, transportation, installation, alignment, fixing, and all incidental works required for satisfactory completion. The item shall be complete in all respects, including all labour, materials, tools, tackles, consumables, testing, and commissioning, as directed by the Engineer-in-Charge. |
| 53 | Heavy Duty leak proof fire bucket as per IS 2546/1974 |
| 54 | Fire bucket stand for 6 bucket |
| 55 | Rubber mat for Electrical purpose (for H.T./L.T. Pannel, and any electric point) as per IS 5424. 1 Mtr. X 2 Mtr. (12.5 mm thick) |
| 56 | Ce & UL Certified PLC/RTU in IP 65 enclosure suitable to communicate with GSM Bases modem unit with CPU And power supply with analog & didital parametrefeaturecas specified forceach tubewell /OHT & stand alone OHT to store and transfer data on GSM backbone, RTU.PLC Designd with logic to tranfer data at multi stations as as specified in tender technical specification sheet |
| 57 | G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/PLC capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification. |
| 58 | CE/UL Certified 7 inch HMI touch screen suitable to comminication with PLC/RTU for local display and control for process parameter. |
| 59 | Control panel with IP 65 protection, industrial grade for al equipment seprate for control (24 Volt) and 800 VA power pack. |
| 60 | CE/UL Certified Intelligent Smart Energy Meter. |
| 61 | CO2 type Fire extinguisher ISI mark confirming to IS 15683- 4.5 Kg. |
| 62 | Motor operated actuator for 400 mm dia existing valve. |
| 63 | CableComplete cabling for CWR including all power & control cable of all equipments at CWR (Upto 3 Pumps) |
| 64 | Security Survelliance IP Camera with recoder Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender