Tender For Construction Of Guest House In The Premises Of Scbmch, Kataka (Such As Expansion Of Institutional Guest House Modified Qr. No.23 And 24 In 6Th Floor Of Msb) (Civil And E.I.)
Tender Value
71.49 Lakhs
Estimated cost
Bid Submission
13 Aug 2026
12 days left
EMD
71500
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cuttack → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Guest House In The Premises Of Scbmch, Kataka (Such As Expansion Of Institutional Guest House Modified Qr. No.23 And 24 In 6Th Floor Of Msb) (Civil And E.I.)
BOQ
| Sl. No. | Item Description |
| 1 | Civil Works:-Supplying and fixing of Double skin wall paneling made of aluminum anodised section framing confirming to standard Aluminium sections as horizontal and vertical members with atleast 600mm c/c with 9mm thick BWR block ply and 4mm thick veneer finished with melamine polished on both the faces complete in all respect as per specification and direction of Engineer-in-charge. |
| 2 | Providing, fitting & fixing of Gypsum Board Suspended ceiling made out of G.I channel frame of approved quality of ISI mark and approved thickness with G.I Angle at border and G.I “T” of size 1”x11/2”, fixing 2’-0” centre to centre inserted with Gypsum board of approved quality , suspended with G.I. wires including cost of all labour, T&P, cost, conveyance and taxes of all materials etc. complete . (i)Room No.23 & 24 |
| 3 | (ii)Room No.21 & 22 |
| 4 | Finishing the wall surface with cement putty of approved make and finished smooth & even surface to receive painting including cost of scaffolding staging charges with cost, conveyances, taxes of all materials, cost of labour, T&P required for the work etc. complete as per specification & direction of the Engineer-in-charge. (i)Room No.23 & 24 |
| 5 | (ii)Room No.21 & 22 |
| 6 | Priming one coat with any approved Wall primer up to any height & in all floors to give an even shade including cost, conveyance, taxes of all materials with Labour, T&P required for the work complete in all respect as per direction of the Engineer-in-charge. (i)Room No.23 & 24 |
| 7 | (ii)Room No.21 & 22 |
| 8 | (iii)Caretaker room |
| 9 | Painting two coats with approved plastic emulsion paint to inside surface of walls including watering, curing with cost, conveyance, taxes of all materials, labour, T&P required for the work etc. complete as per specification & direction of Engineering-in-charge. (i)Room No.23 & 24 |
| 10 | (ii)Room No.21 & 22 |
| 11 | (iii)Caretaker room |
| 12 | Providing fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design & quality including cost, conveyances, taxes of all Materials, cost of all labour & T&P etc. required for the work etc. complete in all respect as per specification & direction of the Engineer-in-charge. (i)Room No.23 & 24 |
| 13 | (ii)Room No.21 & 22 |
| 14 | Supplying, fitting and fixing of 2 Track UPVC sliding window of approved make with 6mm thick glass of approved quality including cost, conveyance, taxes of all materials, labour and T&P required for the work etc complete with frame, shutters and all fittings and fixtures as per specification and direction of Engineer-in-charge. (i)Room No.23 & 24 |
| 15 | (ii)Room No.21 & 22 |
| 16 | Providing cupboard made out of 19mm thick BWR ply with sunmica of approved quality including cost of stainless steel hardware fittings, locking arrangements with all cost of labour T&P etc complete in all respect as per specification and direction of Engineer-in-charge. (i)Room No.23 & 24 |
| 17 | (ii)Room No.21 & 22 |
| 18 | Dismantling & removing the Old Doors & windows and Stacking the useful materials for re-use & removing the debris away from the worksite including all cost of labour, T&P required for the work etc. complete as per direction of the Engineer-in-charge. Room No. 23 & 24 |
| 19 | Supplying, fitting & fixing of Well dressed & seasoned Sal wood Choukaths of size 0’-5” x 0’-21/2” for doors & windows including fixing the same in proper position including mending size of grooves in choukaths fixing with necessary W.I. clamps in position with screws, painting to wall side face of choukath with 2coats of coaltaring finished smooth including cost of all labour, T&P, cost, conveyance, royalty & taxes of all materials required for the work etc. complete in all respect as per direction of Engineer-in-charge. Room No.23 & 24 |
| 20 | Providing and applying of anti-termite treatment by drilling holes of 12mm dia metre at a distance of 300mm C/C junction of walls and floor about 300mm apart deep enough to reach the soil below and chemical emulsion (PREMISE, MIDACHLO PRIED 30.5 SC of BAYER MAKE MIXED with 475 litre of water) pumped these holes to soak the soil @ 1.00 litre solution of each holes should be plugged with filling materials including cost, conveyance, taxes of all materials with cost of all labour, T&P required for the work etc. complete in all respect as per direction of the Engineer-in-charge. (i)Room No.23 & 24 |
| 21 | (ii)Room No.21 & 22 |
| 22 | Supplying and fixing of wall panelling made of aluminium anodised section frame confirming to standard aluminium section as horizontol and vertical members with atleast 6mm c/c and fixing of 9mm thick BWR ply with 4mm thick veneer pasting finished with melamine polishing complete in all respect as per specification and direction of Engineer-in-Charge. Room No.21 & 22 |
| 23 | Supplying, fitting & fixing of Aluminium fittings and fixtures (Godrej make Door closure of approved quality & specific size including cost, conveyances, taxes of all materials & cost of all labour, T&P required for the work etc. complete as per specification & direction of the Engineer-in-Charge. Room No.21 & 22 |
| 24 | Fly Ash Brick masonry using Fly Ash Bricks (25cmX12cmX8cm) having crushing strength not less than 75Kg/sqcm with dimensional tolerance +2% in cement mortar (1:6) after immersing the bricks for six hours in water before use in SUPERSTRUCTURES in all floors including splays, cutting, circular moulding, corbelling, champhering and similar such type of works, scaffolding, watering, curing, including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. (Sixth floor) Caretaker Room |
| 25 | R.C.C work of M-20 Grade having a minimum compressive strength (in work test) 200kg/sqcm in 15cm cubes at 28 days after mixing and test conducted in accordance with IS 456 and IS516 using 20mm down graded size black hard crusher broken granite stone chips as per the design mix of approved quality and from approved quarry including hoisting, lowering, laying and compaction by using vibrators, watering, curing for 28days, centering, shuttering and finishing the exposed surface smooth, providing grooves or beads where necessary including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect but excluding cost of MS Rod or tor steel and binding wires & labour charges for bending binding and tying the grills etc. as per specification and direction of the Engineer-in-Charge. Sixth floor (Caretaker room)(A)RCC Lintel |
| 26 | (B)Roof beam |
| 27 | (C )Roof slab |
| 28 | Cutting, straightening coiled or bent up M.S. Rod or tor steel (TATA/ SAIL/Vizag/ Zindal etc)including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge. Sixth floor (Caretaker room) |
| 29 | Providing 16mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to inside rough surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. Sixth floor (Caretaker room) |
| 30 | Providing 12mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to out side smooth surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. Sixth floor (Caretaker room) |
| 31 | Painting two coats with fungal resistance weather seal coat of approved shade over a coat of primer by means of brush to out side surface of walls after cleaning the surface including watering, curing etc complete in all floors including cost, conveyance, taxes of all materials, labours, sundries, T&P required for the work etc. complete in all respect as per specification & direction of Engineer-in-charge. Sixth floor (Caretaker room) |
| 32 | Providing fitting and fixing of vitrified floor tiles of size 600mm x 600mm x 10mm of plain (ivory) approved make & colour laid over 20mm thick cement mortar bed of prop.(1:4) to proper slope & level joined with neat cement slurry with approved colour pigment to match the colour of tiles including watering and curing, cost of all labour, T&P, cost, conveyance and royalty, taxes of all materials etc. complete in all respect as per direction of Engineer-in-charge. (Caretaker room) |
| 33 | Providing, fitting & fixing of aluminium sliding window fully glazed shutter made out of aluminium frame of approved quality made of Section No.9778, 4095, 4096, 9777, 3994 as window frame section of ISI mark inserted with 5mm thick black glass of approved quality & colour including all hardware fittings, cost of all Labour, T&P, cost, conveyance and taxes of all materials etc. complete in all respect as per direction of Engineer-in-charge. (Caretaker room) |
| 34 | Providing, fitting & fixing of Aluminium door with O.E.L. anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom & middle member and 6mm plain glass in top portion with 12mm thick pre-laminated board in bottom portion fixed on door frame by means of tapered clip No.4660 and the frame to be completed by means of jointing angle No.1855 including all cost of labour, T&P, hire charges of drilling machine, cost of all materials, cost of all fixtures etc. complete in all respect as per specification & direction of Engineer-in-charge. (Caretaker room) |
| 35 | Carriage of Debris/ surplus Earth by Mechanical Means upto 5KM. Lead including Cost of all Labour for Loading & Unloading Charges, Transportation and spreading in layers at the dumping area etc. Complete as per specification & direction of Engineering-in-charge. |
| 36 | E.I. Works:-Supply,installation, testing and commissioning of Air Cooled HI Wall split type Air conditioners complete with Indoor unit (IDU), Out door unit (ODU), i/c R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high voltage cut off and50 hz ,1 phase AC Supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll /rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 Degree Celsius. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS694 or IS 9968 temperature sensing control IS/ International Electro technical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per IS :1391 Part II 2023. The system shall be able to operate up to 50 Degree C (out door ambient temperature). The indoor outdoor must be Blue Fin coated. The unit price included with 3mtr Copper piping with insulation, drain Pipe and copper Power cable. The indoor should have 4 way swing . 5 Star Inverter Type - Cooling only (Category II)2.0 TR with 5 Star BEE Rating (O General-ASGG24CGWA-B/ Daikin-FTKM60XV16 /Hitachi-YOSHI 5500STXL) |
| 37 | S/F of 5 KVA (130V – 280V) Voltage Stabilizer complete in all respect as per Direction of Engineer-in-Charge. ( Make- V-GUARD / Microtek) |
| 38 | S/F of Powder coated Wall Stand for outdoor unit with Anchor Fastener (For 1.5/2 Ton) complete in all respect as per Direction of Engineer-in-Charge. |
| 39 | S/F Copper cooling Piping with Insulation and 4mmsq 3 core copper Power Cable for 1.5/2 Ton Split AC complete in all respect as per Direction of Engineer-in-Charge. |
| 40 | S/F of 25mm hard PVC Drain Pipe with C clamp complete in all respect as per Direction of Engineer-in-Charge. |
| 41 | S/F of Nylon Netted Flexible Drain Pipe with \\"C\\" clamp complete in all respect as per Direction of Engineer-in-Charge. |
| 42 | Recessed wiring to Light point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 6Amp, 250V Modular switch ISI marked and ceiling rose ISI marked mounted on metal box having front Modular cover of suitable size, metal box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection.(Make of wire-L&T/Anchor/Havells/V-Guard/Great White/HPL) Group-A |
| 43 | Group-B |
| 44 | Group-C |
| 45 | Recessed wiring to Fan point -do- Group-B |
| 46 | Group-C |
| 47 | Recessed wiring to Call bell point -do- Group-C |
| 48 | Supply and fixing of 6Amp plug with 6Amp switch on existing board(Make-Legrand Myrius) |
| 49 | Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6Amp and 6Amp Modular switches connection (Make-Legrand Myrius) |
| 50 | Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6amp, 16Amp socket outlet and 16Amp Modular switches connection (Make-Legrand Myrius) |
| 51 | S/F of Ac Point with Starter and connector (Make - Cona/ Anchor Roma/ HPL/ Graetwhite) |
| 52 | Supply and fixing of Electronics step type Modular fan regulator. (Make-Legrand Myrius) |
| 53 | S/F of Multipurpose board consisting 2nos. 6Amp plug and switch with all connection (Make-Legrand Myrius) |
| 54 | S/F of Multipurpose board consisting 3nos. 6Amp plug and switch and 15/16 amp plug and switch modular on metal box and modular cover with all connection (Make-Legrand Myrius) |
| 55 | Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required.(Make of wire-Finolex/ L&T/ Anchor/ Polycab/ Havells/ Great white/ RR/ V-Guard/ HPL) 2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia |
| 56 | 2 X 2.5 sq.mm +1 X 1.5 sq.mm -do- |
| 57 | 2 X 4 sq.mm +1 X 1.5 sq.mm -do- |
| 58 | Supply and fixing of LED square recess/ surface mounted panel Lights (Make-Havells/ Cromption/ wipro/ panasonic/ Philips)24 Watt (284 mm x 284 mm) |
| 59 | Supply and fixing of Different type LED Lights (Make-Havells/ Cromption/ wipro/ panasonic/ Philips)20 Watt 4' LED tube lights |
| 60 | Supply and fixing of BLDC ceiling Fan (Usha / Crompton / Havells / Orient )48\\" Ceilling fan |
| 61 | S/F of Exhaust fan12\\" (Make - Havells/ Usha/ Crompton/ Almonard) |
| 62 | Supply & Fixing of 10Ltr Gyser Including all connection -Make Havells/Crompton |
| 63 | Providing and fixing of 2 feet extra down rod of 30 cm length G.I pipe 20 mm dia heavy gauge including etc, as required.(Per ft-65/-) |
| 64 | Supply and fixing of following different DD DB BOX .(Make-Legrand/ Hager/ Simens/ schneider)6way Double door DB BOX. |
| 65 | 4way Double door DB BOX. |
| 66 | Supply and fixing of 6Amp to 32A rating 240 V/415 V \\"C\\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make-Legrand/ Hager/ Simens/ schneider) 6 to 32 SP MCB |
| 67 | 63A FP MCB |
| 68 | S/F of Clamp & S.hook |
| 69 | Supply and fixing of 125A with 63A cubical Panel box of 2mm C R sheet& Panel board size (30''X28''X12'') with 125A 4P MCCB-1no, 63A 4P MCCB-1no,30X6 copper busbasr-1no,25 x 5 copper busbar-1no,Drum insulater-16nos, LED indicator-6nos including drilling holes in cubcle panel,making connection etc as required .(Make- Legrand/ Hager/ Simens/ schneider) |
| 70 | Providing and fixing 6 SWG G.I. wire on surface or in recess for loop earthing along with existing surface / recessed conduit as required. |
| 71 | Supply of following PVC Aluminium armoured XLPE cables insulated ISI marked .(Make- Havells/ Polycab/ KEI / RR)3.5Cx25sqmm |
| 72 | 3.5Cx35sqmm |
| 73 | 3.5Cx50sqmm |
| 74 | Laying and fixing of one number of PVC insulated and PVC sheathed/ XLPE power cable of 1.1KV grade of size not exceeding 25 sq.mm on surface as required. |
| 75 | Laying and fixing of one number of PVC insulated and PVC sheathed/ XLPE power cable of 1.1KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm on surface as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender