Tender For Construction Of Cafeteria Inside Ahpgic, Kataka (Civil & E.I.) For The Year 2026-27
Tender Value
26.68 Lakhs
Estimated cost
Bid Submission
13 Aug 2026
12 days left
EMD
26700
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cuttack → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Cafeteria Inside Ahpgic, Kataka (Civil & E.I.) For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Civil Works :- Earth work in Excavation of foundation in ordinary soil up to the required depth including Moorum, stony earth and earth mixed with boulders except sheet rocks and boulders requiring blasting including dressing, leveling the bed and depositing the excavated materials away from work site with initial leads and lifts, T&P shoring, shuttering and dewatering if required etc, complete as directed by Engineer-in-charge. |
| 2 | Earth work in filling in foundation and plinth with excavated earth deposited at worksite including watering, ramming with cost, conveyance, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc., complete as per direction of Engineer-in-charge. |
| 3 | Supplying, & filling in foundation and plinth with good quality river sand including watering, ramming with cost, conveyance, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc., complete (Measurement will be taken on finished compacted section) as per specification and direction of Engineer-in-charge. |
| 4 | Providing and applying of anti-termite treatment by drilling holes of 12mm dia metre at a distance of 300mm C/C junction of walls and floor about 300mm apart deep enough to reach the soil below and chemical emulsion (PREMISE, MIDACHLO PRIED 30.5 SC of BAYER MAKE MIXED with 475 litre of water) pumped these holes to soak the soil @ 1.00 litre solution of each holes should be plugged with filling materials including cost, conveyance, taxes of all materials with cost of all labour, T&P required for the work etc. complete in all respect as per direction of the Engineer-in-charge. |
| 5 | Plain Cement concrete (1:3:6) in foundation and floors using 4cm(1½”) size hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete, watering, curing etc, complete to required levels laid in layers not exceeding 0’-6” thick in each layer including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge. |
| 6 | R.C.C work of M-25 Grade having a minimum compressive strength (in work test) 200kg/sqcm in 15cm cubes at 28 days after mixing and test conducted in accordance with IS 456 and IS516 using 20mm down graded size black hard crusher broken granite stone chips as per the design mix of approved quality and from approved quarry including hoisting, lowering, laying and compaction by using vibrators, watering, curing for 28days, centering, shuttering and finishing the exposed surface smooth, providing grooves or beads where necessary including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect but excluding cost of MS Rod or tor steel and binding wires & labour charges for bending binding and tying the grills etc. as per specification and direction of the Engineer-in-Charge. (i)RCC Raft |
| 7 | (ii)RCC Column upto Plinth level |
| 8 | (iii) RCC Grade beam |
| 9 | (iv) RCC Column in Super structure (Ground floor) |
| 10 | (v) RCC Roof beam (Ground floor) |
| 11 | (vi) RCC Roof slab (Ground floor) |
| 12 | (vii) RCC Window Sill (Ground floor) |
| 13 | (viii)RCC Lintel (Ground floor) |
| 14 | Cutting, straightening coiled or bent up M.S. Rod or tor steel (TATA/ SAIL/Vizag/ Zindal etc)including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge |
| 15 | Fly Ash Brick masonry using Fly Ash Bricks (25cmX12cmX8cm) having crushing strength not less than 75Kg/sqcm with dimensional tolerance +2% in cement mortar (1:6) after immersing the bricks for six hours in water before use in FOUNDATION, PLINTH AND BASEMENT and for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 16 | Fly Ash Brick masonry using Fly Ash Bricks (25cmX12cmX8cm) having crushing strength not less than 75Kg/sqcm with dimensional tolerance +2% in cement mortar (1:6) after immersing the bricks for six hours in water before use in SUPERSTRUCTURES in all floors including splays, cutting, circular moulding, corbelling, champhering and similar such type of works, scaffolding, watering, curing, including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. (Ground floor) |
| 17 | Providing 12mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to out side smooth surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 18 | Providing 16mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to inside rough surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 19 | Providing 6mm thick cement plaster in cement mortar (1:4) to Ceiling of Roof Slab, Stairs, Chajjas, shelves, lofts & other R.C.C. surfaces including deep close chipping, roughening, scrapping, cleaning the exposed R.C.C. surface finishing smooth, providing masonry drip course & grooves wherever necessary including watering, curing, scaffolding etc, complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work, screening the sand etc. complete as per specification & direction of the Engineer-in-charge. |
| 20 | Painting two coats with fungal resistance weather seal coat of approved shade over a coat of primer by means of brush to out side surface of walls after cleaning the surface including watering, curing etc complete in all floors including cost, conveyance, taxes of all materials, labours, sundries, T&P required for the work etc. complete in all respect as per specification & direction of Engineer-in-charge. |
| 21 | Painting two coats with approved plastic emulsion paint over a coat of wall primer to inside surface of walls after cleaning the surface including watering, curing with cost, conveyance, taxes of all materials, labour, T&P required for the work etc. complete as per specification & direction of Engineering-in-charge. |
| 22 | Providing fitting and fixing of vitrified floor tiles of size 600mm x 600mm x 10mm of plain (ivory) approved make & colour laid over 20mm thick cement mortar bed of prop.(1:4) to proper slope & level joined with neat cement slurry with approved colour pigment to match the colour of tiles including watering and curing, cost of all labour, T&P, cost, conveyance and royalty, taxes of all materials etc. complete in all respect as per direction of Engineer-in-charge. |
| 23 | Providing fitting and fixing of vitrified tiles (Dado) of 8 to 10mm thickness size 600mm x 600mm of coloured / printed series (Homogenous) approved make & colour with application of polymer modified cement based water resistance adhesive bed & filling joints with epoxy grout with approved colour pigment to match the colour of tiles including watering and curing, cost of all labour, T&P, cost, conveyance and royalty, taxes of all materials etc. complete in all respect as per direction of Engineer-in-charge. |
| 24 | Supplying, fitting and fixing of 2 Track UPVC sliding window of approved make with 6mm thick glass of approved quality including cost, conveyance, taxes of all materials, labour and T&P required for the work etc complete with frame, shutters and all fittings and fixtures as per specification and direction of Engineer-in-charge. |
| 25 | E.I. Works:-Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/Gloster with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal 6A modular type ( flame retradant type) switch ISI marked (Make: legrand (Mylinc)/schneider (clipsal)/hager (Insysta)) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) ( flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. Light Point GROUP-A |
| 26 | Light Point GROUP-B |
| 27 | Light Point GROUP-C |
| 28 | Light Point GROUP-B |
| 29 | Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. (Make: legrand (Mylinc)/schneider (clipsal)/hager (Insysta)) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 30 | Supplying ,fixing of 6A Plug on the same board in Separate switch board with complete fitting by 01 no of 6A switch & socket (modular type & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. (Make: legrand (Mylinc)/schneider (clipsal)/hager (Insysta)) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 31 | Supplying,fixing of 2X 6A Plug on the separate board with complete fitting by 02 no of 6A switch & socket(modular type) ( with suitable size modular box & metallic cover plate (both side)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. (Make: legrand (Mylinc)/schneider (clipsal)/hager (Insysta))(For equipement power). (Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. |
| 32 | Supplying,fixing of Multipurpose board consisting 3nos. 6Amp plug and switch and 15/16amp plug and switch Modular on metal box and Modular cover (both side)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. (Make: legrand (Mylinc)/schneider (clipsal)/hager (Insysta))(For equipement power). .All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. |
| 33 | Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 3pin, 16Amp socket outlet and 16Amp Modular switches connection as required complete in all respect as per direction of Engineer in charge (Make: legrand (Mylinc)/schneider (clipsal)/hager (Insysta)) |
| 34 | Recessed Extra lead Sub-main wiring for light and fan point in 2x1.5mm2 FR PVC insulated single core multistrand copper conductor of ISI Marked confirming to IS-694/1990 in 20mm dia nonmetalic heavy duty conduit 1.6 sqmm thick along with 1x1.5 sqmm FRLS PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / Havells /Polycab/KEI/Gloster) 2x1.5 sqmm +1x1.5 sqmm 1100 Volts confirming to IS 694/1990 |
| 35 | Recessed wiring to Sub-main in 2x2.5 sqmm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 20mm dia non metalic heavy duty flexible conduct 1.6mm thick along with 1x1.5sqmm FRLS PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / Havells /Polycab/KEI/Gloster) 2x2.5 sqmm +1x1.5 sqmm 1100 Volts confirming to IS 694/1990 |
| 36 | Recessed wiring to Sub-main in 2x4 sqmm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 20mm dia non metalic heavy duty flexible conduct 1.6mm thick along with 1x1.5sqmm FRLS PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / Havells /Polycab/KEI/Gloster) 2x4 sq mm+1x1.5 sqmm 1100 Volts confirming to IS 694/1990 |
| 37 | Recessed wiring to Sub-main in 2x6 sqmm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 20mm dia non metalic heavy duty flexible conduct 1.6mm thick along with 1x2.5sqmm FRLS PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / Havells /Polycab) 2x6 sq mm+1x2.5 sqmm 1100 Volts confirming to IS 694/1990 |
| 38 | Recessed wiring to Sub-main in 4X6 sqmm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 32 mm dia non metalic heavy duty flexible conduct 1.6mm thick along with 2X2.5sqmm FRLS PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / Havells /Polycab) 4X6 sq mm+2X2.5 sqmm 1100 Volts confirming to IS 694/1990 |
| 39 | S/F of 6 WAY SPN MCB DB on existgsurface / wall mounting with all connection complete in all respect as per direction of engineer incharge (Make : Schneider (ACTI 9 ) /legrand (Ekinox 3) /siemens (Betaguard) ) |
| 40 | S/F of 12 way SPN MCB DB on existgsurface / wall mounting with all connection complete in all respect as per direction of engineer incharge (Make : Schneider (ACTI 9 ) /legrand (Ekinox 3) /siemens (Betaguard)) |
| 41 | S/F of 4 WAY TPN MCB DB on existgsurface / wall mounting with all connection complete in all respect as per direction of engineer incharge (Make : Schneider (ACTI 9 ) /legrand (Ekinox 3) /siemens (Betaguard) ) |
| 42 | Supply and fixing of SP 6-32 A, 10 KA rating 240 V \\"C\\" series miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand (DX 3)/siemens (Betaguard) /Hager ) |
| 43 | Supply and fixing of DP 6-32A, 10 KA rating 415V \\"C\\" series miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand (DX 3)/siemens (Betaguard) /Hager) |
| 44 | Supply and fixing of DP 63A, 10 KA rating 415V \\"C\\" series miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand (DX 3)/siemens (Betaguard) /Hager ) |
| 45 | Supply and fixing of FP 63A, 10 KA rating 415V \\"C\\" series miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand (DX 3)/siemens (Betaguard) /Hager ) |
| 46 | Supplying and installation of AC Point Modular type, (Make: legrand (Mylinc)/schneider (clipsal)/hager (Insysta)) coil voltage-230 Volt A.C. on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 47 | S/F of step type electronic Modular Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge (Make: legrand (Mylinc)/schneider (clipsal)/hager (Insysta)) |
| 48 | S/F of 9 inch Heavy duty (Metalic Colour) Exahust Fan with wall cutting, S/F of proper size of hume pipe, concreating, plastaring, painting with all connection testing and commissioning complete in all respect as per direction of Engineer in charge (Make:- Almonard / Usha- S. PH Turbo/Crompton - Trans Air/Khaitan,/ Havells) |
| 49 | Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years.. |
| 50 | S/F of 400 MM Wall Mounted fan all connection testing and commissioning complete in all respect as per direction of Engineer in charge (Make:- Almonard / Usha/Crompton /Khaitan,/ Havells) |
| 51 | Supply and fixing of 16 Amp TOP complete in all respect as per direction of Engineer in charge (Make-Havells/ Cona/ Panasonic) |
| 52 | Supply and fixing of 18 watt Recess Light ,making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Panasonic/ Great white/ Orient/ wipro/ Havells/Phillips)(2Years Warranty) |
| 53 | SITC of energy efficient LED tube light fittings with Aluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). |
| 54 | Supply and fixing of 70 Watt LED Street Light ,making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Panasonic/ Great white/ Orient/ wipro/ Havells/Phillips)(2Years Warranty) |
| 55 | Supply of fixing of 40 mm GI Brackt with 2 nos GI clamp & 4 nos 3'' Anchor fasteners for fixing of street light. |
| 56 | Supply and Installation of Capacity- 1100 VA, Maximum bulb load- 924 W ,Technology- Sine Wave Technology,No of battery supported- One Battery (12V) ,Display: Informative LCD display which shows real time performance statistics ,Charging current: User can choose charging current between (8A-18A) for optimized performance, Optimized performance: User can choose Output voltage between (200V-240V) to optimize between Longer Backup time and Performance, Fast battery charging: Low voltage battery charging begins from 95V and fast charging from 135V input supply , Mode selector: Eco and UPS mode available Complete safety for your home with protection features and alarms on short circuit, overload, over-temperature and low battery Safety for your equipment as it supplies grid like power to the connected load Supports all Battery types (Flat, Tubular and SMF) and all battery capacities (80Ah-250Ah) (Make:- Luminous(Optimus 1250) / Microteck/ or equivalent) |
| 57 | Supply and Installation of Battery 200 Ah capacity, 12V, Warranty - 48* Months Tubular Technology battery – Robust Tubular plates Low antimony alloy used for low maintenance Suitable for areas with frequent and long power cuts Excellent overcharge tolerance (accepts very deep discharge-suitable for areas with long power cut) Factory charge battery in ready to use condition (Make:- Luminous / Microteck/ or equivalent) |
| 58 | Supply and Installation of Trolley for Battery Trolley. (Make:- Luminous / Microteck/ or equivalent) |
| 59 | S/F of 63 - 100 A copper busbar panel of size 28*16*8 inch of 63 AMP MCCB AS INCOMER copper busbar, 415V 4 strip & internal connection & provision for termination of incomming & out going cable , earthing, Indicator etc, |
| 60 | Supply of 16 sq. mm 4 Core 1.1KV Grade ISI Marked pvc insulated pvc sheathed XLPE Alluminium Armored power Cable (Make-Polycab /Havells/Finolex) |
| 61 | Laying and fixing of one number of PVC insulated and PVC sheathed/ XLPE power cable of 1.1KV grade of size not exceeding 25 sq.mm on surface as required. |
| 62 | Supply and fixing of 4 pole (3P+N) ( T1+T2 - Iimp 8 kA/pole T2 - 60 kA) 40 KA SPD in existing cubicle panel board including drilling holes in cubcle panel, making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand (DX 3)/siemens (Betaguard) /Hager) |
| 63 | Supply and fixing of Digital Meter Displays Current, line to neutral & line to line Voltages, frequency & Power Factor. (VA & PF - Phase Wise & Average) IEC 62053-21 complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand (DX 3)/siemens (Betaguard) /Hager) |
| 64 | Supply and fixing of 4 pole MCCB 16-100A,Ics = 100% Icu, 16 KA breaking capacity, adjustableThermal,fixed magnetic type in existing cubicle panel board including drilling holes in cubcle panel, making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand (DX 3)/siemens (Betaguard) /Hager) |
| 65 | Supply and fixing copper plate earthing 600 mm X 600 mm X 3.15 mm thick ISI marked including accessories and providing masonary with charcoal and salt with all connection complete in all respect as per direction of engineer incharge |
| 66 | Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing along with existing surface / recessed conduit as required.. |
| 67 | S/F of Earthing with medium class 40mm 3Mtr. Long ISI marked GI Earth pipe including accessories such as funnel GI nut, Bolt, washer , hinged cover plate with looking arrangement, 40mm to 20GI rediusor 5nos 20mm dia holes on GI pipe required charpol salt, Excavation of earth brick work in cement mortar complete in all respect as per specification of SR 2011 and as per Direction of Engineer-in -Chage |
| 68 | Supplying and laying 6 SWG G.I wire on surface or in recess for connection etc as required. |
| 69 | Supply and fixing of 5 Feet Automatic Metal Sleek Air Curtain with Magnetic Sensor for Double Door | White | Low Noise Energy Efficient, Temperature Control & Dust Barrier for Commercial as required complete in all respect as per direction of Engineer in charge (Make : Blue Star/ EUREKA AIR CURTAIN or equivalent) |
| 70 | Supply,installation, testing and commissioning of Air Cooled HI Wall split type Air conditioners complete with Indoor unit (IDU), Out door unit (ODU), i/c R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high voltage cut off and50 hz ,1 phase AC Supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll /rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 Degree Celsius. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS694 or IS 9968 temperature sensing control IS/ International Electro technical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per IS :1391 Part II 2023. The system shall be able to operate up to 50 Degree C (out door ambient temperature). The indoor outdoor must be Blue Fin coated. The unit price included with 3mtr Copper piping with insulation, drain Pipe and copper Power cable. The indoor should have 4 way swing . 5 Star Inverter Type - Cooling only 2.0 TR with 5 Star BEE Rating (O General-ASGG24CGWA-B/ Daikin-FTKM60XV16) |
| 71 | S/F of copper cooling pipe with insulation packing and flexible copper cable |
| 72 | S/F of Nylon Netted Drain Pipe with C clamp |
| 73 | S/F. Of Powder coated Wall Stand with Anchor Fastener (For 1.5 Ton/ 2 Ton ) |
| 74 | S/F 5 kva voltage stabiliser 130-300V (make : V guard) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender