Tender For Repair And Maintenance To Fencing, Boundary Walls, Steps, Gates, Footpaths, Culverts And Drains In Old Ta Bn Area, Bso Yard, Sec Hospital Complex And Other Locations Under Age B/R-Ii At Ima Dehradun. .
Tender Value
35 Lakhs
Estimated cost
Bid Submission
21 Aug 2026
20 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance To Fencing, Boundary Walls, Steps, Gates, Footpaths, Culverts And Drains In Old Ta Bn Area, Bso Yard, Sec Hospital Complex And Other Locations Under Age B/R-Ii At Ima Dehradun. .
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water etc complete as specified |
| 2 | M&L for Rendering 15mm thick plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement and mixed with water proofing compound as per manufactures instructions, complete all as specified and directed. Note-water proofing compound shall be measured and paid separately. |
| 3 | Supply only Liquid water proofing compound ISI marked |
| 4 | M&L for for Factory made Precast heavy duty RCC drain cover 80mm thick type B1 (1:2:4) with 20 mm graded aggregates, with using 10mm dia reinforcement TMT bar (150 mm C/C both ways) including 1.00mm thick MS black sheet frame on edges 80mm wide with two coats of anti-corrosive paint over primer all complete, as specified and directed. |
| 5 | M&L for heavy duty vitrified exterior grade tiles 300mmX 300mmX10-12 mm thick, set, over and incl 20 mm thick cement mortar 1:4 bedding and jointed and pointed in neat cement surry in floors with pigments incl taking down old tiles complete all as specified and directed. |
| 6 | M&L for Machine cut kota stone slab flooring mirror finished 20-25 mm thick (each slab not less than 0.25 Sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 20 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing complete incl dismantling of Old kota stone all as specified and directed. |
| 7 | M&L for mirror polishing incl Cutting and grinding of existing Granite/kota/terrazo stone floor surface on horizontal and vertical surface and finally finishing the surfaces uniformally by applying floor polish to give high gloss finish complete all as specified and directed by Engr-in-Charge. |
| 8 | M&L for 300x300x25mm thick (M-35) glossy finish polished red color Chequered cement concrete tile of any pattern as decided by Engr-in-charge as in floors/pavings laid over 20 mm thick screed bed in cement mortar 1:6 laid and jointed with white cement slurry mixed with pigment to match the shade of tile complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed. |
| 9 | S&F Coloured machine pressed/vibro mechanically floated interlocking paver block any shape and size confirming to IS - 15658-2006 of 80 mm thickness, M-40 grade, with topping of cement mixed with imported pigment colour and shape shall be approved and including dismantling old paver tiles complete all as specified and directed by Engr-in-Charge. |
| 10 | M&L for dismantling precast coloured concrete Interlocking paver blocks any shape and size and refixing with & including 25mm thick sand cushioning layer complete, all as specified and directed. |
| 11 | M&L for Brick work with sub class ‘B’ brick (old size) straight or curved on plan exc 6m mean radis built in CM 1:6 incl dismantling of old brickwork in cement mortar complete. |
| 12 | M&L for 75 mm thick Cement concrete type D-2, (1:4:8) using 40 mm graded crushed stone aggreates) as in flooring and demolishing existing cement concrete and removing debris outside the premises complete all as specified and as directed. |
| 13 | M&L for PCC 1:4:8 type D-2, (using 40 mm graded crushed stone aggregate) as in foundation, filling, mass concrete and sub base of floor and demolishing existing cement concrete and removing debris outside the premises complete all as specified and directed |
| 14 | M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work and demolishing existing cement concrete and removing debris outside the premises complete all as specified and directed. |
| 15 | M&L for PCC 1:3:6 type C2 ( with 40 mm graded agrregate) in Surface channel or drains including necessary form works , stops ,moulds etc and demolishing existing cement concrete and removing debris outside the premises complete all as specified and as directed. |
| 16 | M&L extra for forming fair finished drain or channel upto 45cm inner girth in cement concrete using extra cement including necessary forms mould mitred /stopped ends etc complete all as specified. |
| 17 | M&L for 75mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with sealing compound grade 'A' including necessary formwork etc and demolishing existing cement concrete and removing debris outside the premises complete all as specified and directed |
| 18 | M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded agg) used as sub floor finish the surface to receive to tiles demolishing existing cement concrete and removing debris outside the premises complete all as directed. |
| 19 | M&L for 40mm thick PCC type B1 1:2:4 (using 20mm graded crushed stone aggregate) as in floors and finishing the concrete even and smooth using extra cement including demolition of existing old cement concrete floors etc complete all as directed. |
| 20 | Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in concrete, brickwork or masonary etc including taking out embedded portion and making good disturbed ground. |
| 21 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 22 | Dismantling unframed timber scantlings n.exc 40 sqcm in section, in any position |
| 23 | S&F MS work as in fencing posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work confirming Fe-290 Gde E-165 to including embedding in concrete complete all as specified and directed. |
| 24 | S&F Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, and similar work complete all as specified and directed. |
| 25 | S&F rolled mild steel section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connected plates of grade Fe 410-W (Gde E-250) quality A complete all as specified and directed |
| 26 | S&F Hard drawn steel wire fabric cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt (Weight to be ascertained by a BOO) |
| 27 | S&F Pre-painted coloured galvalume aluminium Zinc coating (AZ-150 grade) GI based corrugated (pattern and shade as directed) steel sheet 0.50 mm thick of green colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws etc complete all as directed including dismantling existing sheet complete all as specified and as directed. |
| 28 | S&F Pre- painted colour galvalume aluminium Zinc coating (AZ-150 grade) GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges fixed with self tapping screws etc complete all as directed including dismantling existing sheet complete all as specified and directed. |
| 29 | S&F 4mm dia PVC Coated chain link Fencing of weight not less than 3.5 Kg/ Sqm made up into matresses or cages,lapped, wired and laid in position, including closing after filling incl dismantling of old fencing complete all as specified and directed.Note ;- Mesh Size to be approved by Engr-in Charge as per site requirement.(Weight to be ascertained by a BOO) |
| 30 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and 'scraved the other to be fitted with washers and one hexagonal or square nut exc 5 cm but n.exc 10 cm long and dia 5 to 10 mm complete all as specified. |
| 31 | M&L, MS round bars 10 mm dia and over cut to length, bent to shape reqd incl cranking bending etc and binding with MS wire (annealed) not less than 0.9 mm dia as in chain link fencing fixing |
| 32 | S&F in repairs galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured). |
| 33 | M&L for heavy duty precast prepolished coloured cement concrete cobble stones paver block of size 100x100mm and 80 mm thickness of M-35 grade of fiber reinforced concrete (FRC) with approved colour, design and pattern, thickness & size / shape made by table vibratory method using rubber mould with strong vibratory compaction laid over 100mm thick PCC (1;4;8 type D-2), using 40 mm graded stone agg and 20 mm thick 1:4 Screed bed or bedding layer of mortar including dismantling of existing damaged flooring etc complete, all as specified and directed. |
| 34 | M&L for 16-18mm thick lakha stone (granite) work in path / vertical surface polished as in floor / vertical surface etc .Over and including 15mm thick screed bed in cement mortar 1:4 set and jointed in neat cement slurry and pointed coloured cement to match the surface incl demolition of old stone complete all as specified and directed by Engr-in-Charge. |
| 35 | M&L for 16-18mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms, shelves in cupboard,handwash places and like including necessary cutting and grooving to walls, moulding edges and making good by pointing in cement mortar (1:2) using admixture of pigment to match with shade of granite over and including cement screed bed Cement Mortar (1:6) 15 mm thick colour of granite as approved incl demolition of old stone all as specified and directed by Engr-in-Charge. |
| 36 | M&L, removing old damaged filling materials from joints of play courts, cleaning and forming constrction joint 30 mm deep x10 mm wide filled with sealing compound Grade A, including site clearance complete all as specified and directed. |
| 37 | M&L, for preparation of old painted cement concrete or plaster surfaces and painting lines, dashes, arrows and letters on pavements, play courts etc of any description not exceeding 10 cm width and girth and applying one coat of synthetic enamel paint complete all as directed. |
| 38 | M&L for removing old worn out surface finish, cleaning and prepration of existing treated surface of tennis/basketball court and providing two layers of reinforced waterbased acrylic sports floor coating over a coat of water based sealer complete all as specified,directed and as approved. |
| 39 | S&F precast cement concrete louvres and jallies, type B-0, 1:2:4 (using 12.5 mm graded aggregates) 30mm thick (measured solid), including all mouldings reinforced with high strength 2mm round steel wires set in cement mortar 1:4 complete all as specified and as directed. |
| 40 | Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as reqiured to faciliate demolition) complete all as specified and directed. |
| 41 | M&L for reinforced cement concrete type B1 1:2:4 (20 mm graded aggregates) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc complete all as specified |
| 42 | M&L for reinforced cement concrete type B1 1:2:4 (20 mm graded aggregates) as in Columns, pillars, piers, posts and struts complete all as specified |
| 43 | M&L for reinforced cement concrete type B1 1:2:4 (20 mm graded aggregates) as in Beams, cantilevers, bressummers, lintels and the like complete all as specified |
| 44 | M&L for reinforced cement concrete type B1 1:2:4 (20 mm graded aggregates) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like |
| 45 | Use and waste of formwork to sides and soffits of roof beams, lintels lever shelves incl supports over hang etc ruogh finished surfaces of concrete flat all as specified. |
| 46 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams or similar works vertical or to batter for rough finished surface of concrete complete. |
| 47 | Use and waste of formwork to sides of pillars, posts, struts, columns for rough finished surface of concrete complete. |
| 48 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surface of concrete complete. |
| 49 | M&L for TMT steel bars 10mm dia and over cut to length, bent to shape required including cranking and binding with Mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 50 | M&L for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed |
| 51 | M&L for for preparation of old painted concrete, brick, stone or plaster surfaces including kerb stone, pillar surface and similar of any description over 10 cm width and girth and applying one coat of synthetic enamel paint complete all as directed. |
| 52 | M&L for Preparation of newly plastered or scrapped surfaces of wall or ceiling and applying 1.5mm thick damp proof wall care putty in two coats as per manufacturer instruction complete all as specified and directed. Note : 1. Work will be carried out upto a height of 15 mtrs. 2. Rates shall be inclusive of scaffoldings and other arrangements to reach the required height. |
| 53 | M&L for Preparation of old treated plastered/Puttied surfaces of walls and applying two coats of weather proof exterior emulsion paint complete all as directed. |
| 54 | M&L for Preparation of old treated plastered surfaces of wall and applying one coat of weather proof exterior emulsion paint on walls/ceiling complete all as directed. |
| 55 | Complete removing of existing treatment from wall or ceilling surfaces by scrapping with mechanical means upto entire satisfaction of Engr-in-Chage, all as specified and directed. |
| 56 | M&L for one coat of primer on wall / ceiling through normal applications complete all as per manufacturer instruction and directed by Engr in Charge (Rate shall be inclusive of scafolding and other arrangement to reach height) complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender