Tender For Special Repairs To West Wing Of Nd School (P-31) At Naval Base Kochi
Tender Value
1.26 Crore
Estimated cost
Bid Submission
28 Aug 2026
4 days left
EMD
2.01 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To West Wing Of Nd School (P-31) At Naval Base Kochi
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Aug-2026 | CGDM | BOQ | 28-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size n.exc 1.50 Sqm and removing from site complete all as specified and directed. |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size exc 1.50 Sqm and n.exc 4.00 Sqm each.complete all as specified and directed. |
| 3 | S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 4 | S&F powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no) . hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified. complete all as specified |
| 5 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm each pane complete all as specified and directed. |
| 6 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 Sqm each pane complete all as specified and directed. |
| 7 | S & F 10 mm thick fully glazed toughened glass shutter frameless including all stainless steel fitting and hydraulic door closer fixed in position complete all as specifed and directed |
| 8 | S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement. |
| 9 | S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 10 | S&F Aluminum powder coated two track sliding windows with two sliding shutters with glass panes ) including suitable beading channel gasket, rollers Maruthi lock with handles etc complete with following specification:-Frame :- 61.98mmx29.70mmx1.50mmShutter stiles, top & bottom :- 39mmx20mmx1.5mmPanel :- 5.00mm thick tinted sheet glass of selected quality exc 0.50Sqm each pane fixed to aluminum frame with beadind, rubber gasket. |
| 11 | S&F aluminum powder coated door shutter with frames of size - 44.5mmx50mmx1.5 mm incl. screwing of frame glass necessary joints cleats, glazing clips rubber packing, snap beading, suitable handle, tower bolt, SS butt hinges,mortice lock 4 lever with 65 mm latch size including aluminium anodized door frame of size 63.5mmx 38.10mm x1.5 mm thick fixed to wall with necessary screws and plug complete all as specified & directed. (rates for one no hydraulic door closer per shutter & 5 mm thick tinted glass /4mm thick ACP sheet reqd to be fitted in shutters is included in the item ) |
| 12 | S&F aluminum powder coated parttion fixed/sliding type with frames of size -side , top rail and intermidiate sections size 63.50mmx38.10mmx1.5 mm , incl. screwing of frame glass necessary joints cleats, glazing clips rubber packing, snap beading, fixed to wall with necessary screws and plug complete all as specified & directed. (rates for 5 mm thick tinted glass / 4mm thick coloured aluminium composite panels reqd to be fitted in shutters is included in the item ) |
| 13 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressivestrength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 14 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction.Note: stainless steel butt hinges and necessary S S screws shall be paid separately |
| 15 | S&F 100 mm long mild steel butt hinges medium weight complete all as specified and directed. |
| 16 | S&F aluminum anodized barrel tower bolt 200mm long of extruded section complete all as specified and directed. |
| 17 | S&F aluminum anodized sliding door bolt 200mm long with hasp and staples (bolt type) and fixing clips of sheet cast of extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed. |
| 18 | S&F aluminum bow handle \\"D\\" type anodized 150mm long complete all as specified and directed. |
| 19 | S&F in repair Brass barrel tower bolts 150mm, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed. |
| 20 | S&F in repair Brass, sliding door bolt of size 200mm with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed. |
| 21 | S&F in repair Brass handles 150mm, cast type, polished bright complete all as specified and directed. |
| 22 | S&F in repair Aluminium extreded section Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixedcomplete all as specified and directed. |
| 23 | S&F in repair Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor complete all as specified and directed. |
| 24 | Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed. |
| 25 | M&L for precast cement concrete block masonry in type C1, 1:3:6 (20 mm graded stone aggregate) with solid blocks exc 10 cm in width and setting in cement mortar 1:6 in foundation load bearing wall and wall complete all as specified and directed. |
| 26 | M&L for 10mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 27 | Taking down cement plaster of any description on brick work or stone masonry walls including rackingout joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 28 | M&L for rendering 8mm thick in CM 1:4 using liquid WPC over 12mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as directed. Note: Water proofing compound shall be paid separately. |
| 29 | Supply only liquid water proofing compound complete all as specified and directed |
| 30 | Taking down Wall panelling and similar work complete all as specified and directed. |
| 31 | S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour sheet PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing |
| 32 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. |
| 33 | Dismantling single layer Mangalore pattern or similar tiles in roofing.complete all as specified and directed. |
| 34 | Dismantling plain or corrugated steel sheeting any gauge, thickness complete in roofing. complete all as specified and directed. |
| 35 | Dismantling battens for tiles, shingles, etc of any size exceeding 15cm spacing including tilting fillets. complete all as specified and directed. |
| 36 | Dismantling timber boarding any description fixed in any position with nails. complete all as specified and directed. |
| 37 | Dismantling timber scantiling 40 Sqcm and over in section unframed work in any position. complete all as specified and directed. |
| 38 | Dismantling timber scantlings under 40 Sq cm in section for unframed work in fillets, rails, posts, rafters, purlins etc, in unframed works complete all as specified and as directed. |
| 39 | M&L for second class hard wood plain fillets square, rectangular or triangular in section clean sawn secured with nails etc of sectional area exc 3 Sqcm and n.exc 6 Sqcm. complete all as specified and directed. |
| 40 | M&L for second class hard wood in scantling clean sawn fixed as in purlins, rafters, etc in roof. complete all as specified and directed. |
| 41 | M&L for second class hard wood boarding clean sawn with butt joints, 20mm thick as in soffits of gutter, eves board fixed with nails, etc. complete all as specified and directed. |
| 42 | M&L for 2nd class hard wood clean sawn battern for tile at 30cm centres of sectional area exc 15Sqcm and n.exc 25Sqcm. complete all as specified and directed. |
| 43 | S&F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap, fixed with L-hook or cranked bolts complete all as specified and as directed. |
| 44 | S&F Plain Aluminium sheeting 0.71mm thick, Alloy 31000H4 in ridge, hips, valley gutter, drip and straight flashings. complete all as specified and directed. |
| 45 | M&L for preparing and treating tiles battens any size and spacing with one coat of creosote complete all as specified. (Measured overall in one side only spacers not deducted) |
| 46 | M&L for mangalore pattern roof tiles, interlocking at side joints, laid dry complete all as specified and as directed. |
| 47 | M&L for ridge or hip tiles to suit mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and as directed. |
| 48 | M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler one or more coats on old work complete all as specified and directed. |
| 49 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/blankets, any thickness including cover fillets. |
| 50 | S&F Aluminum snap grid false ceiling with grid 605x605mm size including hangers 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40 x 3 mm size 60 mm long & expansion hold fastners 12.5 mm dia 40 mm long includng 4mm thick Non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with stainless steel screws complete all as specified |
| 51 | S&F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. |
| 52 | M&L for 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately |
| 53 | Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed. |
| 54 | M & L for Anti termite post construction Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified |
| 55 | M&L for preparation and complete removal of existing treatment and applying two coats of Oil bound distemper over a coat of 1.5 mm thick wall care putty and one coat of alkali resistant primer complete all as specified and directed.Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction. |
| 56 | M&L for preparation of old decorated surface of exterior wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and applying two top coats of exterior anti fungal acrylic emulsion paint (Apex ultima protek (Asian paint)having FIVE years of performance warranty) over a coat of exterior primer (Apex ultima protek (Asian paint) wherever required all as specified and prescribed by manufacture of point and as directed at site.Note: (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of emulsion paint. The cost of materials (like putty, base coat/topcoat of exterior paint), labour & T&P wherever required for preparation of surface are demand to be included in the rates quoted. (ii)The work must be got executed through authorised applicator of manufacture. Guarantee certificate should provide from the authorised applicator of manufacturer and shall be got approved from GE. (iii)After carrying out preparation of surface the same shall be got approved before application of exterior emulsion for each building.(iv) The cost of Scaffolding and safety measures wherever required are deemed to be included in the rates quoted by the contractor |
| 57 | M&L for two coats of oil bound distemper over a coat of 1.5mm thick wall care putty and one coat of alkali resistant primer to newly plastered surface including preparation of surfaces complete all as specified and directed. |
| 58 | M&L for preparation of new plastered surface finishes of external wall, preparation of surface and applying two coats of weather proof (antifungal, Asian Ultima Protek) paint over a coat of suitable primer , complete all as specified and as directed by the Engineer-In-Charge. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction. |
| 59 | Dismaintaing wall/floor tiling/ terrazo tile/ mosaic tiles/ pcc tiles incl. cement mortar bedding removing serviceable bles to store and rubbish off the premises as in repair. |
| 60 | M&L for Light shade Vitrified ceramic tiles 8-10mm thick (square/rectangular) area of each tiles exc 0.36 Sqm but not exc 0.42 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:4 laying floor finishes, complete all as specified and directed |
| 61 | M&L for Vitrified ceramic tiles 8-10mm thick (square/rectangular) area of each tiles exc exc 0.36 Sqm but not exc 0.42 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 5mm thick rendering of cement mortar 1:3 as in skirtings floor finishes, complete all as specified and directed |
| 62 | M&L for coloured Non Skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. with 4mm spacer set and jointed in neat cement slurry and pointed in white or coloured cement to match, over 15mm thick screed bed of CM 1:4 all as specified and directed. |
| 63 | M&L for Glazed ceramic coloured joint free tiles 450x300X7mm/600x300x7mm in vertical surfaces over and including 10mm thick rendering in Cement mortar (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed |
| 64 | M & L for epoxy tile joint filling for item No 63 using approved manufacturer on floor and walls. All complete as per the manufactures instructions complete all as specified and directed. |
| 65 | S&F in repair vitreous china WHB white with flat back of size 550x400mm with bracket including waste coupling and 32mm PVC waste pipe and 15mm bore Pillar taps,cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 66 | S&F in repair PVC flushing cistern low level 8 to 10 Ltr capacity of approved make including fixing of brackets connection to WC with CI brackets and making good disturbed area complete all as specified and directed. |
| 67 | S&F in repair vitreous china wash down water closet pan pedestal pattern white including fixing with trap including PVC matching seat cover complete all as specified and directed. |
| 68 | S & F in repair Vitreous China urinals, half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with PTMT Urinal spreader, grating and Union for discharge pipe complete all as specified and directed.. |
| 69 | S&F in Vitreous china urinal partition white of size 310x700 mm with Urinal partitions slabs terminating about 40cm above floor line, fixed in repairs complete all as specified and directed. |
| 70 | S&F in repairs 600x450mm looking mirror of selected quality glass mounted on 6mm thick of commercial plywood and PVC moulding frame fancy type complete all as specified and directed. |
| 71 | S&F in repair brass CP towel Rail 600mm long \\"D\\" type complete all as specified and directed. |
| 72 | S&F in repair Stainless steel soap dish fixed to wall with screw complete all as specified and directed. |
| 73 | Taking down rainwater pipe, eaves gutter and AC vent pipe of any size including AC gutters, walls etc incl all fittings complete all as specified and directed.. |
| 74 | S & F 200mm dia of half round or 220mm width rectangular UPVC heavy duty eaves gutter of pressure rating 6 kg/cm2 of approved make including necessary fitting like bend WC/MS clips etc complete all as specified. |
| 75 | S&F 110mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed. |
| 76 | S&F 75mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches/floor complete all as specified and directed. |
| 77 | S&F 110mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches/floor complete all as specified and directed. |
| 78 | S & F 100mm Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 79 | S&F PVC (SWR) bend any radius 110mm bore complete all as specified and directed. |
| 80 | M&L for 75mm PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed. |
| 81 | Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 82 | M&L for 50 mm thick PCC 1:4:8, Type D-2 using 40 mm graded stone aggregate as in sub-base for flooring complete all as specified and directed. |
| 83 | M&L for 50 mm thick PCC 1:2:4, Type B-2 using 40 mm graded stone aggregate as in floor finishes complete all as specified and directed. |
| 84 | M&L for plain Cement concrete 1:2:4, type B1, using 20mm stone aggregate as in surface chanels and drains complete all as specified and directed |
| 85 | S&F in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 86 | M&L for dismantling Stone slabs and tiles of any description or thickness in laid beeded and pointed in any motar in floors, aprons etc.complete all as specified and directed. |
| 87 | M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) stone slab as in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust to match with marble shade over and including cement screed bed 15mm thick in CM (1:6) complete all as specified and directed. |
| 88 | M&L for Providing edge moulding to 18-20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed. |
| 89 | M&L in repair for 18-19mm thick Marine plywood with both side laminated mica sheet glossy finished (not less than 1mm) covered kitchen cabinets, water proof, termite & Borer proof, corrosion free with melamine polished shutter and auto closer counter sunk hinges, stainless steel handles complete all as directed . |
| 90 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 91 | S&F in Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 92 | M & L for Cement concrete Type B2, 1:2:4 using 40 mm graded stone aggregate as in posts (including caps and bases) complete all as specified and directed. |
| 93 | M&L for preparing new surfaces of steel , any description, over 10cm in width or girth, not otherwise described and applying two coat of anti corrosive paint over two coat epoxy primer complete all as specified and directed |
| 94 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation and getting out in soft/ loose soil. all as specified and directed. |
| 95 | Removing excavated soil to a distance exc.250m but n.exc 500m and depositing where directed. |
| 96 | Returning filling in soft/loose soil including spreading leveling watering and wall ramming in layers n/exc 25 cm thick all as spd and directed |
| 97 | M & L for precast cement concrete type B1, 1:2:4 (20mm graded stone aggrigate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified |
| 98 | S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 99 | M&L for cement concrete 1:2:4, type C1 using 20 mm graded stone aggregate as in coping and including use waste of formwork etc complete all as specified and directed |
| 100 | M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 101 | S&F 110mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches/floor or fixed to wall including necessary clamps complete all as specified and directed. |
| 102 | S&F 75mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches/floor or fixed to wall including necessary clamps complete all as specified and directed. |
| 103 | S&F PVC (SWR) bend any radius 110mm bore complete all as specified and directed. |
| 104 | S&F PVC (SWR) bend any radius 75mm bore complete all as specified and directed. |
| 105 | S&F PVC (SWR) floor trap 75mm bore plain with grating including jointing with solvent cement complete all as specified and directed. |
| 106 | M&L for hume pipe septic tank 25 users capacity including AC vent pipe, earth work excavation in soft/loose soil, erecting hume pipe septic tank in position, PCC 1:3:6 and all other accessories required such as vent cowl etc and making good the disturbed surface and removing surplus soil and old u/s septic tank, complete incl connecting to the sewer line etc complete and provide new connections to the new septic tank complete all as specified and directed. |
| 107 | M&L for plain Cement concrete 1:3:6, type C2 using 40mm graded stone aggregate as in foundation concrete all as specified and directed. |
| 108 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 109 | Demolition of cement concrete (unreinforced) above ground floors and paving exc. 15cm thickness (below or above ground level). complete all as specified and directed. |
| 110 | M&L for plain Cement concrete, 1:2:4 type B1 using 20mm graded stone aggregate as in chamfered on edges complete all as specified and directed.. |
| 111 | M&L for 75 mm thick PCC 1:4:8, Type D-2 using 40 mm graded stone aggregate, as in sub base for flooring complete all as specified and directed. |
| 112 | M&L for Hardcore of broken stone of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface all as specified |
| 113 | M&L for Coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm spreading and levelling in layers n exc. 25 cm thick andr well ramming including watering as required complete all as specified and directed. |
| 114 | M&L for Machine pressed precast concrete interlocking paver block any shape,colour and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade with grey cement and pigment complete all as specified and directed. |
| 115 | M&L 75mm thick PCC 1:3:6 type C-2 Using 40mm graded crushed stone aggregate as in plinth protection /hardstanding , laid in panels, finished the top surfaces even and fair without using extra cement complete all as specified and directed. |
| 116 | Dismaintaing wall/floor tiling/ terrazo tile/ mosaic tiles/ pcc tiles incl. cement mortar bedding removing serviceable bles to store and rubbish off the premises as in repair complete all as specified and directed.. |
| 117 | M & L for chequered colour cement concrete tiles 30x30cmx 25mm thick set jointed grey and pigment and pointed in neat cement slurry in floors/steps including screed bed or bedding layer of morter 15mm thick in cm 1:4 complete all as specified and directed |
| 118 | M & L for Endura tiles 30x30cmx10mm thick set jointed grey and pigment and pointed in neat cement slurry in floors/steps including screed bed or bedding layer of mortar 15mm thick in cm 1:4 complete all as specified and directed |
| 119 | Dismantling fencing wire mesh, any type complete all as specified and directed. |
| 120 | Excavating in post holes (or similar holes) in Soft/loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed. |
| 121 | M & L for plain Cement concrete 1:2:4, type B2 using 40 mm graded stone aggregate as in posts (including caps and bases) complete all as specified and directed. |
| 122 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290-0 Gde E 165 complete all as specified and directed. |
| 123 | M&L for mild steel screw bolts 5 to 10 dia of neck in mm(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long. |
| 124 | S & F PVC coated chain link fencing of any size and Gauge as approved by GE confirming to IS 2721 including line wires fitted to to any type of standards, rails, straining bolts, fencing posts etc. including provision of binding wire or using suits bolts & nuts or welding with iron angle complete all as specified and directed. |
| 125 | Supplying and laying of CPVC pipes 25 mm outter dia high pressure SDR 13.5 & Plain CPVC SDR 11 fittings in trenches/ on wall complete including all necessary fittings, solvents, complete all as specified and directed. |
| 126 | Supplying and laying of CPVC pipes 20 mm outter dia high pressure SDR 13.5 & Plain CPVC SDR 11 fittings in trenches/ on wall complete including all necessary fittings, solvents, complete all as specified and directed. |
| 127 | Supply and fix in repairs of 15mm size Chromium Plated fancy type Bib Taps, quarter turn with flange and aerator, short body, cast copper alloy with crutch or butterfly handle, screwed for GI/ CPVC pipe, complete all as specified and as directed.Make: Cera Cat. ref. F2004151 or equivalent to Jaquar/ Prayag |
| 128 | Supply and fix in repairs of 15mm size Chromium Plated cast copper alloy Bib Cock, short body with flange and nozzle for garden/ washing machine, complete all as specified and as directed.Make: Cera Cat. ref. F2014153 or equivalent to Jaquar/ Prayag |
| 129 | Supply and fix in repairs 15 mm size Chromium Plated cast copper alloy Angle Valve, half turn with flange, for fixing with CPVC pipe, complete all as specified and as directed.Make: Cera Cat. ref. F8040204 or equivalent to Jaquar/ Prayag |
| 130 | Supply and fixed in repairs, 20mm size Chromium Plated cast copper alloy, fancy type, quarter turn Concealed Stop Cock, with CP cup and adjustable wall flange, complete all as specified and as directed.Make: Cera Cat. ref. F2002362 or equivalent to Jaquar/ Prayag |
| 131 | Supply and fix in repairs of 15 mm size Swivel Overhead Shower (minimum weight 40 grams) of PTMT, any colour with shower arm (minimum weight 40 grams) 195mm long with bend of 45 degree with flange, fixing with CPVC Pipe, complete all as specified and as directed.Make: Cera Cat. ref. F 7020104 or equivalent to Jaquar/ Prayag |
| 132 | Supply and fix in repairs of Health Faucet, ABS body with wall hook and one metre SS braided rubber hose pipe, complete all as per specified and directed.Make: Cera Cat. ref. F 8030102 or equivalent to Jaquar/ Prayag |
| 133 | M&L for cutting chases on walls, floors etc. not exceeding 10cm girth and making good the disturbed surface to match with the existing surface after removing the existing concealed pipe/ laying new pipe, complete all as specified and directed. |
| 134 | Supply and fix in repairs of 2000 litres capacity Rotational Moulded Polyethylene Water Storage Tanks (Cylindrical, vertical with closed top), 3 layers hoisted & fixed in position, complete all as specified and as directed.Make: Sintex (ISI)/ Aquatech/ Rotex |
| 135 | Supply and fix in repairs of 25mm dia. CPVC Ball Valve suitable for CPVC pipe including necessary fittings, complete all as specified and directed.Make: Supreme/ Eurotech/ Astral/ SFMC |
| 136 | Taking down old unserviceable PVC tank any capacity or any type and any make all as specified and directed. |
| 137 | Taking down carefully existig copper / alumn point wiring for light / fan / bell / socket 5/15 Amp points complete with fitting and fixtures such as switches, sockets, c/ rosess, holders and bracket fittings with battens / conduits / wires,T/L fittings and making good the disturbed surfaces of walls and roofs etc.and to match with existing colour complete all as specified and directed. |
| 138 | Taking down carefully unserviceable main switches and distribution boards with fuses/ MCB's (single phase or three phase) of any capacity all as specified and directed. |
| 139 | Taking down carefully old unserviceable sub main wiring including meters and making good disturbed surfaces and matching with existing complete all as directed and specified |
| 140 | M&L of Light point wiring with 1.5 Sqmm PVC insulated sheathed FRLS multistranded single core copper conductor cable in PVC concealed conduit rigid non metalic (ISI marked) fixed concealed on wall/ roof except beam, column and RCC roof including chases cutting incl suitable size/ cap of sunken box for modular switch and socket and modular white cover plate, flush metal box etc inxl 1.5 Sqmm PVC insulated copper conductor as earth continuity wire for One light point controlled by one switch and making good disturbed surfaces of walls, floors etc complete all as specified and as directed. |
| 141 | All as per item No. 140 here-in-before but for One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size complete all as specified and as directed. |
| 142 | All as per item No. 140 here-in-before but for ceiling fan / exhaust fan point complete all as specified and as directed. complete all as specified and as directed. |
| 143 | All as per item No. 140 here-in-before but for One 3 pin 5 Amp socket outlet point controlled by one switch on same board complete all as specified and as directed.. |
| 144 | All as per item No. 140 here-in-before but for One 3 pin 5 Amp socket outlet point controlled by one switch on Independent board complete all as specified and as directed.. |
| 145 | All as per item No.140 here-in-before but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 2.5 Sqmm PVC insulated, stranded, unsheated copper conductor on independednt board with continuous earth wire of size 2.5 Sqmm green colours PVC insulated, unsheathed, stranded copper conductor cable. |
| 146 | All as per item No. 140 here-in-before but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 4.0 Sqmm PVC insulated, stranded, unsheated copper conductor on independednt board with continuous earth wire of size 4.0 Sqmm green colours PVC insulated, unsheathed, stranded copper conductor cable. |
| 147 | M&L Switch modular type 6 amps, 1 module single pole one way duly ISI marked, complete all as specified and directed. Make Legrand Cat ref. 5734 00 or equivalent to Schneider/ L&T |
| 148 | M&L Switch modular type 16 amps, 1 module single pole one way duly ISI marked, complete all as specified and directed. Make : Legrand Cat ref. 5734 10 or equivalent to Schneider/ L&T |
| 149 | S&F Socket outlet modular type 6A - 2 in 1,without shutter, 2 module, duly ISI marked, complete all as specified and directed.Make Legrand Cat ref. 5734 24 or equivalent to Schneider/ L&T |
| 150 | S&F Socket outlet modular type 16A, 3 pin combined, 2 module, duly ISI marked, complete all as specified and directed. Make Legrand Cat ref. 5734 71 or equivalent to Schneider/ L&T |
| 151 | M&L Bell push modular type 6 amps, 1 module single pole one way duly ISI marked, complete all as specified and directed. Make Legrand Cat ref. 5734 13 or equivalent to Schneider/ L&T |
| 152 | S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed. |
| 153 | S&F rotary Stepped type electronic fan regulator for ceiling fan 1200/ 1400mm size, 240 volts, 6 Amps, 2 module, 120W, white in colour, duly ISI marked complete all as specified and directed. Make : Legrand Cat ref. 5734 16 or equivalent to Schneider/ L&T |
| 154 | S&F Door Bell Ding Dong single phase 240 volts, white in colour, duly ISI marked complete all as specified and directed.Make : Legrand Cat ref. 5734 43 or equivalent to Schneider/ L&T |
| 155 | S&F in replacement of ceiling fans, complete with blades, down rods, accessories 230V, 1200mm sweep, with min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current (BLDC) including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified. Note : Old Ceiling fans to be deposited at AGE E/M (NW) store yard.Make : Orient Cat ref. I-Falcon DEco BLDC or equivalent of Havells Enticer Prime BLDC Cat ref. FHCPE5SPWT48 / Usha Cat ref. Aeroedge Plus |
| 156 | S&Fixing of exhaust fan plastic body heavy duty with louvers complete of sweep size 250mm, 1200 RPM, single phase, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including suitable size of cutting/opening the wall for fixing and provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified.Make : Havells Cat ref. Ventil Air-DX white or Crompton Cat Part No EXHD300-4-1 or equivalent to Orient |
| 157 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexiblecopper conductor cable of suitable size complete all as specified and as directed.Make : Philips Cat ref. SP1 70P LED25S-6500 PSU W5L113 OD WH or equivalent to Havells/ Crompton |
| 158 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make : Philips Cat ref. BN308C LED20S-6500 L120 PSU WH or equivalent to Havells/ Crompton |
| 159 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.Make : Philips Cat ref. RC370B LED36S-6500 G6 L60W60 PSU OD V3 or equivalent to Havells/ Crompton |
| 160 | Supply and fixing round shape 18 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.Make : Philips Cat ref. DN496 LED15S-6500 PSU WH or equivalent to Havells/ Crompton |
| 161 | Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. Make : Philips Cat ref. BRP331 LED36 CW R5N PC PSU S1 V1 or equivalent to Havells/ Crompton |
| 162 | M&L for Sub main wiring with two single core 2x4 sqmm FRLS insulated and unsheathed stranded copper conductor alongwith earth wire 6.0 sqmm drawn in FRLS rigid conduit connected to main board complete all as specified and directed (Two runs cable and one number earth wire and suitable FRLS conduit shall measured together as unit length). |
| 163 | M&L for Sub main wiring with two single core 2x6 sqmm FRLS insulated and unsheathed stranded copper conductor alongwith earth wire 6.0 sqmm drawn in FRLS rigid conduit connected to main board complete all as specified and directed (Two runs cable and one number earth wire and suitable FRLS conduit shall measured together as unit length). |
| 164 | M&L for Sub main wiring with four single core 4x16 Sqmm FRLS insulated and sheathed stranded copper conductor alongwith earth wire 10 Sqmm drawn in FRLS rigid conduit connected to main board complete all as specified and directed (Four runs cable and one number earth wire and suitable FRLS conduit shall measured together as unit length). |
| 165 | S&F in repairs, SPN Enclosure with two pin and earth plug and socket complete with one SP MCB, 20 Amps having breaking capacity 10 kA, including taking down old unserviceable earth plug, complete all as specified and directed.Make Legrand Cat ref. 5078 11 or equivalent to L&T/ Schneider |
| 166 | S&F Factory made three phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door vertical distribution board 6 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCCB and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail suitable for use on 240/415V, 50Hz supply, VTPN DB, IP-43 protection, partly immersed in wall, without MCCB and MCB's including making good distrubbed surfaces with matching colour, complete all as specified. Make- Legrand Cat Part No. 5077 21 or Schneider/ Siemens |
| 167 | S&F in replacement of Factory made triple phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door distribution board 6 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail. suitable for use on 240V, 50Hz supply, partly immersed in wall and making good disturbed surfaces with matching colour, complete all as specified.Make Legrand Cat ref. 5077 41 or equivalent to L&T/ Schneider |
| 168 | S&F in replacement of Factory made single phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door distribution board 12 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail. suitable for use on 240V, 50Hz supply, partly immersed in wall and making good disturbed surfaces with matching colour, complete all as specified.Make Legrand Cat ref. 5076 02 or equivalent to L&T/ Schneider |
| 169 | S&F MCCB TPN, 125 Amps, 415 volts,rated service short circuit breaking capacity Ics= Icu at 415V ,27 KA duly ISI marked, in DB, complete with connection testing and commissioning all as specified. Make Legrand Cat ref. 4200 96 or equivalent to L&T/ Schneider |
| 170 | Supply and fix enclosure for MCCB 125 Amps 4 pole complete all as specified and as directed.Make : Legrand Cat Part No. 5078 01 or equivalent to L&T/ Schneider |
| 171 | Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of TPN 40 to 100 Amps current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and as directed.Make Legrand Cat ref. 4086 81 to 4086 83 or equivalent to L&T/ Schneider |
| 172 | Supply and fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 Amps current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.Make Legrand Cat ref. 4086 18 to 4086 20 or equivalent to L&T/ Schneider |
| 173 | Supply and fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 6 To 32 Amps current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.Make Legrand Cat ref. 4085 87 to 4085 95 or equivalent to L&T/ Schneider |
| 174 | Supply and Fixing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 35 Sqmm 3.5 core complete all as specified and as directed. |
| 175 | Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts, nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. Provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC (1:3:6) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to exposed steel surfaces. Excavation in soft/ loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009). |
| 176 | Supply and fixing in repalcement of Automatic transfer Switch (ATS) of capacity 125Amps, 4 pole, AC 50Hz, utilization category AC-31A, fixed with enclosure, inlet and outlet connection etc.all as specified and directed.Make:Havels Cat Part No.IHYFCDE125 or equivalent in ABB/Schneider. |
| 177 | Taking down carefully existig Aluminium strip / GI strip with saddles and making good the disturbed surfaces of walls and roofs etc.and to match with existing colour removing materials to store for keeping in safe custody for taking credit (credit for above items should be made as per conditions separately) |
| 178 | Taking down old Air termination rod complete all as specified and as directed |
| 179 | Taking down old test point complete all as specified and as directed |
| 180 | Supply & fixing in replacement of air termination vertical type Single pointed aluminium rod made of 12 mm dia and 300 mm long with base plate welded at bottom complete all as specified. |
| 181 | Supply & fixing aluminium strip 25 mm x 3.15 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed. |
| 182 | Supply & fixing GI strip 32x6mm buried directly in ground or fixed to walls complete all as specified and directed. |
| 183 | Supply and fixing in replacement of test point terminal block made of gun metal or phosphorus bronze of size 75mm x 75mm x 25mm drilled and screwed including 3 nos 8mm dia 25mm long hexagonal head screw for fixing the same on wall, including suitable size of coverd MS box of 1.5mm thick complete all as specified and directed. |
| 184 | Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm thick, buried directly in ground level with top edge of the earth plate at a depth not less than 2.25mtr below ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcol dust and common salt filling in alternate layers all around top and bottom and electrode connection by using galvanised iron earth lead strip of size 32 x 6mm flat iron by means of bolts, nuts, check nut and washers made of galvanised iron pipe 20mm bore medium grade for watering with funnel and wire mesh including galvanised iron pipe 40mm bore protection pipe light grade for protection strip upto 3m above ground level (Up to the test points) PCC chambeer in cement concrete (1:3:6) type C-2 and RCC pit cover in M-25 (design mix) complete all as shown in electric plate No-3 of the MES standard schedule of rates (Part-I) of 2009 complete all as specified and testing on completion:-(a) The unit rate shall include for protection pipe, GI water pipe, funnel, wire mesh excavation, RCC pit cover, test point, 32x6mm galvanised strip from top of earth plate upto 5mtr above GL anf if GI protection is less than 5m, no price adjustment shall be made. (b) PCC pit shall be provided at least 50cm away from the earth pit and not just on the earth pit and extra cost of additional length of water pipes and fittings, junction, elbow etc. shall be deemed to be included in the unit rate. (c) If the testing result of earth Wk is not been found satisfactory then the contractor shall do other earthing work at his own cost and nothing shall be permissible on the account. (d) Earthing work will be carried out in presence of MES representative. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 28, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender