Tender For Repair/ Maintenance Of E/M Installation At Patiala Under Ge (South) Patiala
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Aug 2026
20 days left
EMD
54000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patiala → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of E/M Installation At Patiala Under Ge (South) Patiala
BOQ
| Sl. No. | Item Description |
| 1 | 'Notes: (i) Please refer Schedule 'A' Notes of tender documents. |
| 2 | Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed. |
| 3 | Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins, arches, pillars etc complete all as specified and directed. |
| 4 | M&L Brick work with Fly ash bricks minimum class designation 100 straight or curved on plan exceeding 6m mean raidus bulit in C:M 1:6 complete all as specified and directed. |
| 5 | M&L for cement plastering 15mm thick in two layers in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cement complete all as specified and directed.Note : WPC will be measured and paid separately. |
| 6 | Supply only integral liquid water proofing compound complete all as specified and directed. |
| 7 | M&L for 10mm thick cement plastering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed. |
| 8 | M&L for 5 mm thick cement plastering in cement mortar 1:3 on fair faces of concrete ceiling surfaces finished fair & even without using extra cement complete all as specified. |
| 9 | M&L for application of 20 -30mm thick high build polymer modified cement mortar (1:3) in two layers over face of concrete of column / Beams / tanks mixed with 6 ltrs SBR latex of M/s Fosroc or equivalent per bag of cement or as per manfactueres instruction and finish the surface even and smooth complete all as specified and directed.Note : (a) SBR latex will be measured and Paid for seperately. (b) Cost of scafflding deemed to be included while quoting the rates. |
| 10 | Supply only SBR Latex chemical complete all as specified and directed. |
| 11 | Providing and applying protective coating to inside surfaces of water tanks with food grade epoxy stearate coating. Application of food grade epoxy stearate coating confirming to CFTRI & Haffkins certifications or equivalent in two coats etc complete all as specified and directed. |
| 12 | M&L for complete removal of existing treatment of any type/ description from walls/ RCC surfaces/ ceiling/ chajjas/ roof projections etc with mechanical means/ grinder complete all as specified. |
| 13 | M&L for preparation of surfaces and applying 02 coats of exterior emulsion paint (light shade) with highlighter of any approved shade, @ 5 Sqm/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 Sqm/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion and primer and using fully automatic airless spray machine having flow speed of min. 1 lit/minute and pressure of 3300psi complete all as specified and directed.Note- (i) The contractor shall submit manufacturer generated 04 years warranty card for each buildings treated/ painted during submission of Final Bill and guarantee amount @ 5% will be kept as reserve till completion of warranty period and will be released thereafter. Any deterioration during the warranty period will be rectified by the contractor without any financial effect within a week.(ii) The work shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials like Exterior/Interior Paint, Putty etc after approval by the GE.(iii) The Contractor shall upload with the documents under cover I \\"Memoradum of Understanding\\" (MOU) as per format given in Annexure ‘A’ after Schedule 'A' Notes with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected.(iv) Cost of T&P and a scaffolding/Jhoola, trestles, ladders, cradeles, centring, crane, boom lifts/ crane of any type and shuttering etc necessary for execution of work and protective measures complete upto all height shall be deemed to be included under respective item.(v) Cost of temporary covering to all joinery items (like doors, windows, window panes), sanitary fittings, dado/skirting, floors, etc to protect them from splashes.(vi) Packing material/empty Buckets will not be handed over to the contractor and will be property of the MES and will be disposed off with the permission of the Engineer-in-Charge and GE. |
| 14 | (vii) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge.(viii) Sample patch of 10Sqm be prepared and shall be got approved from GE prior to carrying out further work.(ix) Cost of removing of nails, making good holes, filling of cracks with acrylic crack filler paste etc shall be deemed to be included under respective item.(x) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary. |
| 15 | M&L for preparation of existing surfaces and applying 01 coat of exterior emulsion paint (light shade) with highlighter of any existing shade, @ 10 sq.m/litre/1 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces by using following brands of emulsion complete all as specified and directed. |
| 16 | M&L for preparation of surfaces and applying 02 coats of Oil Bond/ Acrylic Distemper to wall surfaces over & including a coat of interior wall primer as recommended for under coat by manufacturer of OBD by using following brands of emulsion and primer complete all as specified and directed. |
| 17 | M&L for preperation of plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed. |
| 18 | M&L for preparing existing treated surfaces of ceilings including cornices and applying two coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed. |
| 19 | Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in PCC/RCC of any size/description including taking out embedded portion and making good disturbed ground complete all as specified and directed. |
| 20 | Dismantling old fencing wire/barbed wire of any description/size as in fencing from posts/struts/pillars complete all as specified and directed. |
| 21 | Excavating in post holes (or similar holes) each not exceeding 0.5 cu. m, getting out in soft/ loose soil including removing surplus soil to a distance exceeding 500 m and making good surface. |
| 22 | M&L for 40mm thick cement concrete 1:2:4, type B-0 as in Damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed. |
| 23 | M&L for PCC 1:3:6 Type C-1, using 20 mm graded stone aggregate as in post holes etc complete all as specified and directed. |
| 24 | S&F mild steel work in hard rails, winds ties, posts and struts in fencing with angle including cutting tops to shape as directed, driliing holes, notching for wire, etc: flat iron fillets (for securing wire mesh etc). including all necessary drilling, bolting or riveting, etc. and similar work confroming Fe-290 Gde-E-165 complete all as specified and directed. |
| 25 | M&L MS round bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending, painted with one coat of aluminium paint over a coat of primer and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 26 | S&F mild steel screw bolts of 11-15 mm diameter of shank (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exceeding 5 cm but not exceeding 10 cm long complete all as specified and directed. |
| 27 | Supply only MS galvanized chain link fencing, 4mm dia, diagonally pinned including line wire rails, straining bolts and provision of binding wire complete all as specified and as directed. |
| 28 | Fixing only diagonally pinned fencing wire including line wire, any mesh size and type of standards, rails, straining bolts etc. including provision of binding wire complete all as specified and directed. |
| 29 | Dismantling wrought iron or mild steel work of any description any position complete all as specified and directed. |
| 30 | S&F MS hollow rectangular/square/circular tubes/pipes of YST 310 Grade as in frame work for Framed work as in doors or gates/ roofs/ rafters/ purlins/ chajjas/ trusses/ columns/ struts etc and like similar items etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete and similar work complete all as specified and directed. |
| 31 | S&F, framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 32 | S&F, mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with bolted or welded attachment Fe-410- W (Gde- E-250) quality-B complete all as specified and directed. |
| 33 | Dismantling plain or corrugated roof sheeting, any gauge, thickness/material, including nainital or similar pattern as on roof coverings complete all as specified and directed. Please Enable Macros to View BoQ information |
| 34 | Dismantling plain or corrugated roof sheeting, any gauge, thickness/material, including nainital or similar pattern as on roof coverings complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender