Tender For Water Supply Scheme Of Jjm Under I Rd Block /Sh:-Construction Of 2(Two) Nos. Intermediate Pvc Water Storage Tank (40000 Litre Capacity) In/C Electrical Panel Board & Other Allied Works Etc. At Tangpaiya Para And Rangjuha Para Of Ekjancherr
Tender Value
28.12 Lakhs
Estimated cost
Bid Submission
07 Aug 2026
2 days left
EMD
56249
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gomati → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Water Supply Scheme Of Jjm Under I Rd Block /Sh:-Construction Of 2(Two) Nos. Intermediate Pvc Water Storage Tank (40000 Litre Capacity) In/C Electrical Panel Board & Other Allied Works Etc. At Tangpaiya Para And Rangjuha Para Of Ekjancherra Vc Under Dws Sub-Division I, Gomati Tripura During The Year 2026-27 .
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. -All kind of soils. |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. -All kind of soil |
| 3 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - i) 1:4:8 ( 1 Cement: 4 fine sand : 8 graded well burnt brick aggregate 40 mm nominal size) |
| 5 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - i) 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size) |
| 6 | Centering shuttering including struttings, propping etc. and removal of form work for :i) Foundations, footings, bases for columns etc. for mass concrete with timber plank for foundation trenches |
| 7 | ii) Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank |
| 8 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding allcomplete above plinth level. i) Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 9 | First class brick work in foundation and plinth including cost of all materials as required complete:- i) In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 10 | First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete: i) In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 11 | Extra for brick masonry work in triangular, square and rectangular pillars including cost of all materials as required complete. |
| 12 | Providing and fixing M.S. round holding down bolts with nuts and washer complete as per standard design. |
| 13 | Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. complete. i. 40 mm thick |
| 14 | 12 mm cement plaster of mix. (i). Cement mortar 1:4(1 cement:4 fine sand) |
| 15 | Neat cement punning |
| 16 | Making plinth protection 50mm thick of cement concrete 1:3:6(1 cement: 3 fine sand: 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 17 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 18 | Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of \\"L\\" shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants, as required and as per direction ofthe Engineer-in-charge |
| 19 | Providing structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required. |
| 20 | Providing and fitting fixing of Fully Automatic Star Delta type Motor starter ( 3 ph. 50 Hz, 415V, in Steel Sheet Enclosures with Contractors and Timer etc. complete suitable for submersible Pump L & T, BCH, ABB make as per specification and direction of the Engineer-in-charge. i) 25 HP/26 kw Relay range within 20-32 + 10% |
| 21 | Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havells / BCH make etc. complete as per specification and direction of the Engineer-in-charge. i) 63 amps |
| 22 | Providing and fitting fixing with PVC insulated single core multistrand Copper cable conforming to IS : 694 for inter connection with all electrical equipments of the pannel board as per specification and direction of the Engineer-in-charge. i) 16 sqmm |
| 23 | Providing and fitting fixing of Moulded Case Circuit Breaker (MCCB) of different Thermal release range , 415 + V, 50Hz (L & T, BCH, ABB make) as per specification and direction of the Engineer-in-charge. i) 50-63 Amps |
| 24 | Providing and fitting fixing single phasing preventor +selectable under voltage + selectable over voltage on delay 5 sec & off delay 15 sec phase asymmetry 10% L& T/BCH/HAVELS/Siemens etc. make complete as per specification and direction of the Engineer-in-charge. |
| 25 | Supplying and fitting fixing of KIOSK(Size 450mm x 200mm x 850)fiited with 4 Nos support of 75mm x 75mm (^mm thick) MS angle of embedding with 1:2:4 cement concrete base(size:300mmx300mmx600mm) with proper locking arrangement and coating with anti corrosive paints(both inside and outside)in/c complete in all respect as per direction of the Engineer – in – charge. |
| 26 | Providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) Gamair wood / plywood pannel board for fitting fixing of electrical items, in/c 2 nos MS angle post ( size 2 inch x 2 inch x 9 feet ), nuts & bolts etc. for irrection of the same by 1:1.5:3 cement concrete casting (1 feet x 1 feet x 2 feet) below the ground level and painting two or more coats & plastic paint as per specification and direction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender