Tender For Repair And Maintenance Of Drains, Boundary Wall, Fencing, Sewage Line, Manholes Incl Attending Day To Day Complaints, Certain Other Misc B/R Works At Manekshaw Centre And Khyber Line Under Age B/R-I Of Ge (South) Delhi Cantt-10
Tender Value
40 Lakhs
Estimated cost
Bid Submission
21 Aug 2026
6 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Drains, Boundary Wall, Fencing, Sewage Line, Manholes Incl Attending Day To Day Complaints, Certain Other Misc B/R Works At Manekshaw Centre And Khyber Line Under Age B/R-I Of Ge (South) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning of sewage lines from 100 mm bore to 300 mm bore by super sucker machine with water jet pressure, the sucked wastage material will be collected in tanker and disposed off out of MoD land . All T&P will be provided by contractor including water for pressure to the entire satisfaction of Engineer-in-Charge and testing by pouring water from manhole to manhole, the sludge deposited in sewage line shall be fully cleaned and disposed off the same outside the MOD land at any distance and with any additional cost on the same day when it was taken out. The work shall be carried out with safety precaution equipment and with strict supervision complete all as specified and as directed. Notes :- (a) The tenderer shall engage the above mentioned T&P and intimate to Engr-in-Charge in writing with machine No/Vehicle No etc for their record and prior approval.(b) The T&P as and when brought by the tenderer based on site requirement,the concern site executive shall take a photograph of machine alongwith the supervising staff i.e JE's and contractor's rep etc. and shall kept in record with date.(c) A pucca bound register shall be maintained showing the machine No/Vehicle No and their deployment at site mentioning time and date duly signed by concern JE, Engr-in-Charge and contractor and the same register shall be produced while claiming the payment by the tenderer. (d) The Manhole will measured and paid separately. |
| 2 | Dewatering/desilting of existing manholes of depth upto 1.50 m depth of manhole. The cleaning shall be carried out with mechanised operation by means of diesel / electric operated vehicle mounted hydraulic operated high pressure suction - cum- jetting machines fitted with pump of required requisite capacity and the sludge sucked out with Super Succer Machine.The sludge deposited in manhole shall be fully cleaned and disposed off the same outside the MoD land at any distance and with any additional cost on the same day when it was taken out. The work shall be carried out with safety precaution equipment and with strict supervision complete all as specified and as directed.Notes:- (a) The tenderer shall engage the above mentioned T&P and intimate to Engr-in-Charge in writing with machine No/Vehicle No etc for their record and prior approval.(b) The T&P as and when brought by the tenderer based on site requirement,the concern site executive shall take a photograph of machine alongwith the supervising staff i.e JE's and contractor's rep etc. and shall kept in record with date.(c) A pucca bound register shall be maintained showing the machine No/Vehicle No and their deployment at site mentioning time and date duly signed by concern JE, Engr-in-Charge and contractor and the same register shall be produced while claiming the payment by the tenderer. |
| 3 | Dewatering/desilting of existing manholes of depth exceeding 1.5 m but not exceeding 3.0 m depth of manhole. The cleaning shall be carried out with mechanised operation by means of diesel / electric operated vehicle mounted hydraulic operated high pressure suction - cum- jetting machines fitted with pump of required requisite capacity and the sludge sucked out with Super Succer Machine.The sludge deposited in manhole shall be fully cleaned and disposed off the same outside the MoD land at any distance and with any additional cost on the same day when it was taken out. The work shall be carried out with safety precaution equipment and with strict supervision complete all as specified and as directed.Notes:- (a) The tenderer shall engage the above mentioned T&P and intimate to Engr-in-Charge in writing with machine No/Vehicle No etc for their record and prior approval.(b) The T&P as and when brought by the tenderer based on site requirement,the concern site executive shall take a photograph of machine alongwith the supervising staff i.e JE's and contractor's rep etc. and shall kept in record with date.(c) A pucca bound register shall be maintained showing the machine No/Vehicle No and their deployment at site mentioning time and date duly signed by concern JE, Engr-in-Charge and contractor and the same register shall be produced while claiming the payment by the tenderer. |
| 4 | Removal/cleaning of blockage in WCs, WHB, floor traps, Nahani traps, Cast Iron soil waste pipe running on external wall of bldgs including junction holes of any description etc by rodding thoroughly and pouring water under pressure and cleaning, clearing the drainage to efficient and smooth flow of sludge/waste water complete all as specified and as directed. |
| 5 | Dismantling wrought iron or mild steel/cast iron work of any description complete all as specified and directed. |
| 6 | S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, cattle trap and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed. |
| 7 | M&L for running welding in repairs including cleaning and preparing surfaces for welding thickness of metal to be welded not exc 6mm such as MS butt hinges to MS frame, broken steel windows or ventilators, iron doors and similar work complete all as specified and directed. |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premices complete all as specified and directed. |
| 9 | M&L for 75 mm thick cement concrete Type D-2, (1:4:8), using 40 mm graded stone aggregate as in sub-base, foundations, filling and mass concrete etc including demolition of existing unserviceable concrete and removal from site complete all as specified and as directed. |
| 10 | M&L for 25 mm thick cement concrete Type B-0, (1:2:4), using 12.5 mm graded crushed stone aggregate as in sub-base, including demolition of existing unserviceable concrete and removal from site complete all as specified and as directed. |
| 11 | S&F 12 to 15 mm thick heavy duty parking tiles of any colour, any pattern any desing as approved by GE, area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm as in floors/landing/steps/riser/parking/footpath etc and over & including 15mm thick screed bed or bedding/rendering layer in cement mortar 1:4, including jointed with neat cement slurry and pointed in coloured cement to match the surface of tiles complete all as specified and directed |
| 12 | All as per srl item No 11.00 here-in-before but as in skirting including 12 to 15 mm thick screed bed or bedding/rendering layer in cement mortar 1:4, including jointed with neat cement slurry and pointed in coloured cement to match the surface of tiles complete all as specified and directed |
| 13 | S& F facory made coloured glossy finish interlocking cement paver block, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with,topping of cement mixed with imported pigment, laid over 50 mm thick sand cushion and joints filled with sand including dismentling of existing tiles of any description or in any position complete all as specified and as directed. |
| 14 | Taking down cement plaster including racking out joints hacking for key scrubbing down with water etc on walls and ceiling complete all as specified and as directed. |
| 15 | M&L for 15mm thick rendering with ready mix plaster on brick or concrete surfaces finished even and smooth without using extra cement, curing etc on brick/concrete surfaces complete all as specified and as directed. |
| 16 | M&L for preparation of the newly plastered surfaces of walls/ ceiling and applying two coats with Graco-490 Spray machine of GreenPro certified water-based, modified acrylic, exterior Apex Suprema Emulsion or equivalent as per required shade (Company depot tinted) with silicon additives, heat reflectant property, VOC less than 2% by mass, Class A IS-15489 and IS-101 @5-6 sqm/ltr over one coat of primer with and including average 1 mm thick wall care putty to prepare the surface even and smooth complete all as specified and as directed.Note : Application to be done only by applicator authorised by manufacturer also approved by GE before starting of work. |
| 17 | M&L for complete removal of existing surfaces of walls/ by scrapping with mechanical wall sander (having mechanical vacuum mechanism having RPM not less than 1500, sanding pad of 80 grit having dia of 7\\"/9\\" to make surface free from dust, loose paint and applying two coats with Graco-490 Spray machine of GreenPro certified water-based, modified acrylic, exterior Apex Suprema Emulsion or equivalent as per required shade (Company depot tinted) with silicon additives, heat reflectant property, VOC less than 2% by mass, Class A IS-15489 and IS-101 @5-6 sqm/ltr over one coat of primer complete all as specified and as directed. |
| 18 | M&L for preparation of new steel surfaces of any description , not otherwise described , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zink chrome primer including, complete all as specified and as directed. |
| 19 | M&L for preparation of old painted surfaces of steel of any description over 10cm width or grith and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 20 | M&L for brick work using sub class 'B' bricks, straight or curved on plan exc 6 mtr mean radius in cement mortar (1:6) including demolition of existing brick work in any position/any type and in any shape complete all as specified and as directed. |
| 21 | M&L for Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in surface channel and drains, finished even and smooth without using extra cement ,including cleaning the concrete surface by steel wire brushes, up to four stories bldgs, complete all as speified and as directed. |
| 22 | Demolition of reinforcement cement concrete in any position (reinforcement cut as required to facilitate demolition)complete all as specified and as directed. |
| 23 | M&L for RCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate (Nominal Mix) as in Fins, fascias, louvres, parapets, and railings exc. 60 cm in height, newels, balustrade, and the like, complete all as specified and as directed. |
| 24 | M&L for mild steel TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including muld seel wire (annealed) not less than 0.9mm dia, conforming to grade Fe 550D complete all as specified and as directed. |
| 25 | All as per srl item no 24.000 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, complete all as specified and directed. |
| 26 | M&L for from work to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses,etc.; vertical or to batter, complete all as specified and as directed. |
| 27 | S & F PVC (SWR) pipes 110 mm bore single socketed , in any length with rubber ring joints fixed to wall including dismantling of existing SWR/PVC/Salt glazed ware/AC or reinforced concrete pipe set in cement mortar etc. complete all as specifiecd and as directed. |
| 28 | S & F PVC (SWR) pipes 75 mm bore single socketed , in any length with rubber ring joints fixed to wall including dismantling of existing SWR/PVC/Salt glazed ware/AC or reinforced concrete pipe set in cement mortar etc. complete all as specifiecd and as directed. |
| 29 | M & L for cutting of vegetation/scrubs plant (girth not exceeding 300mm) from roof, terrace, chajjas etc digging out the roots and making good the surface in PCC 1:2:4 type B1 with surfaces finished to match complete including scaffolding etc, complete all as specified and as directed. |
| 30 | Dewatering/desilting of area drainage system etc cleaning of all sludge, silt residue of both organic and inorganice nature by manual labour or mechnical scrappers etc and disposal of the same out side the defence land incl taking down the drain cover and after cleaning / desilting the same to be fixed on the drain , dumping the material to any depth complete all as specified and as directed. |
| 31 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in any type of soil for manhole, pipe wells, etc complete all as specified and as directed. |
| 32 | All as per srl item No 31.00 here-in-before but exceeding 1.5 m but not exceeding 3.0 m complete all as specified and as directed. |
| 33 | Removal of surplus soil not exceed to a distance of 50 m where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed. |
| 34 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exceding 25 cm complete all as specified and as directed. |
| 35 | M&L for cement concrete Type D-2, (1:4:8), using 40 mm graded stone aggregate as in sub-base, foundations, filling and mass concrete etc including demolition of existing unserviceable concrete and removal from site complete all as specified and as directed. |
| 36 | M&L for cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in coping and roof kerbs or mud stops, rounded or chamfered and hold fast on edge including necessary form work complete all as specified and as directed. |
| 37 | S&F in replacement factory manufactured heavy duty FRP (Fibre Reinforced Polymer) moulded drain cover slabs size as required 30 mm thick (minimum) including required size frame, manufactured from UV stabilised isophthalic polyester resin reinforced with E-glass fibre having minimum 30% glass content by weight, with integrally moulded ribs/stiffeners, anti-skid chequered top surface, corrosion, water and weather resistant, designed for minimum UDL of 5.0 kN and concentrated load of 2.5 kN without cracking, delamination or permanent deformation, including providing 20 Nos. integrally moulded/cored watering holes arranged in 5 rows of 4 Nos. each with edges properly finished and resin sealed, removing old/damaged cover, cleaning and preparing existing drain seating and setting/fixing the FRP cover true to line and level in CM 1:4/approved polymer modified bedding compound, including cutting, edge sealing, fixing accessories, loading, unloading, transportation, labour and all incidental works including demolition of existing manhole cover of any type complete all as specified and as directed. |
| 38 | Demolition by breaking up drain pipes salt glazed stone ware pipe, AC, Reinforced concrete etc; any type of 150 mm bore pipe and jointed in cement mortar and taking out of root trenches removing the debries from site complete all as specified and directed. |
| 39 | Demolition by breaking up drain pipes salt glazed stone ware pipe, AC, Reinforced concrete etc; any type of 200 mm bore pipe and jointed in cement mortar and taking out of root trenches removing the debries from site complete all as specified and directed. |
| 40 | M&L for HDPE DWC pipe SN8 sewage pipe of bore 150 mm laid and jointed including with collars and all fittings and fixture, laid in trenches and jointed in cement mortar complete as specified and as directed. |
| 41 | M&L for HDPE DWC pipe SN8 sewage pipe of bore 200 mm laid and jointed including with collars and all fittings and fixture, laid in trenches and jointed in cement mortar complete as specified and as directed. |
| 42 | M&L for cement concrete bed to drain pipes as in cement concrete (1:4:8) type D-2 for 150mm dia pipe including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed. |
| 43 | All as per srl item No 42.00 here-in-before but 200 mm bore pipe. |
| 44 | M&L for moorum/red bajri filling in floors or pavings, laid in layersnot exceeding 15 cm thick spread, levelled and rammed includingwatering complete all as specified and as directed. |
| 45 | Cutting into existing manhole for connecting new drain pipe (150 /200/300 /450 mm bore), making good to pipe and rendering, cutting out existing benching for and forming brench chennel in cement concrete 1:2:4 type B-1 smooth finished etc; complete all as specified and as directed. |
| 46 | Supply and fixing precast RCC kerb stones of approved size (450x300x150mm) and grade(M-30) along the edges of roads, pavements, and pathways, including dismantling/demolition and removal of the existing damaged kerb stones and concrete, excavation to the required depth, preparation of the foundation, laying a 100 mm thick PCC (1:3:6) bed, fixing the kerb stones true to line and level, jointing with cement mortar (1:3), backing with concrete where required, painting the exposed face of the kerb stones with two coats of approved exterior water based emulision paint (black and white) including demolition of existing kerb stone as directed by the Engineer-in-Charge. |
| 47 | Supply and fixing in replacement FRP (Fiber Reinforced Plastic) Trench Covers (450x900mm) 40 mm thick with FRP/GI/MS Frame, suitable for covering drainage trenches, manufactured from high-strength corrosion-resistant FRP composite material. The trench cover shall be designed to withstand a minimum load-bearing capacity of 2.5 Metric Tons, with anti-skid surface finish, UV-resistant, weatherproof, non-corrosive and maintenance-free. The cover and frame shall be fixed in position complete with all necessary accessories, anchor fasteners, cutting, fitting and finishing as required. The product shall conform to relevant standards and be of approved make and quality. Complete in all respects as directed by Engineer-in-Charge.Minimum 2.5 MT (2500 kg) uniformly distributed load.Thickness: As per manufacturer's design to meet specified load requirement (minimum 40 mm for frame and 20mm for cover recommended). |
| 48 | Disposal of building rubbish/malba, similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading and disposal at an approved Municipal dumping ground outside Defence land (MoD land), for all leads and all lifts, complete all as specified and as directed by the Engineer-in-Charge.Notes:1. Photographic Evidence: The contractor shall submit clear photographic evidence in support of disposal of building rubbish/malba, similar unserviceable, dismantled or waste materials, indicating the condition of the site before loading, during transportation and after unloading at the approved Municipal dumping ground. The photographs shall preferably be geo-tagged and date-stamped and shall form part of the record for verification and payment purposes. 2. Certification by Engineer-in-Charge: Completion of whole work in this BOQ shall be deemed to have been achieved only after certification by the Engineer-in-Charge that no building rubbish/malba, similar unserviceable, dismantled or waste materials have been left at the site and that the site has been thoroughly cleared and cleaned to his satisfaction. 3. Each load shall comprise a minimum carrying capacity of 5.00 cubic metres (Cum). Payment under this item shall be made on a per-load basis for loads conforming to the above minimum capacity and duly verified by the Engineer-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender