Tender For Repair / Maintenance Of 11Kv & 33 Kv Ht Elect Installations Incl Connected Items Such As Transformers, Vcbs, Ct/Pt, God, Do Fuses, Avr, Cables Etc At Oaf Mil Stn Under Ge 970 Ews.
Tender Value
46.25 Lakhs
Estimated cost
Bid Submission
22 Aug 2026
17 days left
EMD
92500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
budgam → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair / Maintenance Of 11Kv & 33 Kv Ht Elect Installations Incl Connected Items Such As Transformers, Vcbs, Ct/Pt, God, Do Fuses, Avr, Cables Etc At Oaf Mil Stn Under Ge 970 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down Triple pole mechanism complete with DO Fuse unit from the site, supply and installation of DO fuse unit triple pole, mechanically operated, mounted on insulator and steel frame,with opertaing mechanism worked from ground level with GI pipe medium grade of suitable size, for current rating upto 400 Amps and Air break (switch) insulator suitable for HT 11 KV out door type 50 Amp (DO Fuse) complete all as specified and directed. |
| 2 | Taking down old unservicable cable of any size or type from any description (trenches, walls, ceilings., etc) from various locations, including any short length, complete all as specified and directed. |
| 3 | S&F in repairs cable jointing kit for 11KV grade cable for Outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Aluminium conductor cable of size 50 to 95 sqmm complete all as specified and directed. |
| 4 | S&F in repairs cable jointing kit for 11KV grade cable for Outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Aluminium conductor cable of size 120 to 185 sqmm complete all as specified and directed. |
| 5 | S&F in repairs cable jointing kit for 11KV grade cable for Indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Aluminium conductor cable of size 50 to 95 sqmm complete all as specified and directed. |
| 6 | S&F in repairs cable jointing kit for 11KV grade cable for Indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Aluminium conductor cable of size 120 to 185 sqmm complete all as specified and directed. |
| 7 | S&F in repairs cable jointing kit for 11KV grade cable for Indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Aluminium conductor cable of size 185 to 300 sqmm complete all as specified and directed. |
| 8 | S&F in repairs cable jointing kit for 11KV grade cable for Straight through joint heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Aluminium conductor cable of size 50 to 95 sqmm complete all as specified and directed. |
| 9 | S&F in repairs cable jointing kit for 11KV grade cable for Straight through joint heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Aluminium conductor cable of size 185 to 300 sqmm complete all as specified and directed. |
| 10 | S&F in repairs cable jointing kit for 11KV grade cable for Straight through joint heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Aluminium conductor cable of size 120 to 185 sqmm complete all as specified and directed. |
| 11 | Supply, laying, jointing and testing XLPE HT cable in replacement , PVC insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cable, heavy duty with aluminium conductor 11000 Volts grade (earthed), 3 core 95 sqmm laid in trenches/ floor/ duct/ fixed on poles through GI tubing in different locations / complete all as specified and directed. |
| 12 | Supply and laying XLPE LT cable in replacement , PVC insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cable, heavy duty with aluminium conductor 11000 Volts grade (earthed), 3 core 120 sqmm laid in trenches / floor / duct / fixed on poles / through GI tubing in different locations complete all as specified and directed. |
| 13 | Supply, laying, jointing and testing XLPE cable in replacement , PVC insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cable, heavy duty with aluminium conductor 11000 Volts grade (earthed), 3 core 185 sqmm laid in trenches / floor / duct / fixed on poles / through GI tubing in different locations complete all as specified and directed. |
| 14 | Supply, laying, jointing and testing XLPE cable in replacement , PVC insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cable, heavy duty with aluminium conductor 11000 Volts grade (earthed), 3 core 300 sqmm laid in trenches / floor / duct / fixed on poles / through GI tubing in different locations complete all as specified and directed. |
| 15 | Supply, laying, jointing and testing XLPE HT cable in replacement , PVC insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cable, heavy duty with aluminium conductor 11000 Volts grade (earthed), 3.5 core 185 sqmm laid in trenches / floor / duct / fixed on poles / through GI tubing in different locations complete all as specified and directed. |
| 16 | Supply, laying, jointing and testing XLPE HT cable in replacement , PVC insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cable, heavy duty with aluminium conductor 11000 Volts grade (earthed), 3.5 core 240 sqmm laid in trenches / floor / duct / fixed on poles / through GI tubing in different locations complete all as specified and directed. |
| 17 | Supply, laying, jointing and testing XLPE HT cable in replacement , PVC insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cable, heavy duty with aluminium conductor 11000 Volts grade (earthed), 3.5 core 150 sqmm laid in trenches / floor / duct / fixed on poles / through GI tubing in different locations complete all as specified and directed. |
| 18 | Supply, installing, testing and commissioning in replacement of factory made and tested LT Panel Outdoor type, platform mounted of suitable size for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system having bus bar chamber with insulated electrolytic Copper bus bars of capacity 250 Amps rating installed on DMC insulators with bus bar chamber. The panel shall be dust and vermin proof, IP-42 and made out of 2.00 mm thick CRCA mild steel sheet Wall mounted type, front opening type with aprons for cable entry, with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FRLS cable of adequate size but not less than 1.5 sqmm. All steel metal works including frame shall be with anticorrosive coating with seven tank process and finally epoxy polyester powder coating of Siemens grey RAL- 7035 shade complete all as specified and directed. The scope of work also comprising of the following:- BUS BAR CHAMBER:- 250 Amp TPN, Copper conductor, with colour coded heat shrinkable sleave and shall be mounted on non hygroscopic, non combustible, track resistant, high strength DMC material, interconnection of all incomings & outgoings. INSTRUMENT CHAMBER:- (i) Volt Meter,96 sqmm,flush type rated 0-500V, Digital type with selector switch- 01 Set. (ii) Amp Meter,96 sqmm,flush type rated 0-200A, Digital type with suitable size C.T's, and Selector switch- 01 Set (iii) RYB Phase indicating light LED type with MCB 2A SP C Series- 1 Set of three. INCOMING:- (i) MCCB 200 Amps 25 KA , 4 Pole with adjustable thermal magnetic release=01 No.OUTGOING:- (i) MCCB 4 Pole 63 Amps, 415 volts , 50Hz, 10 KA = 04 Nos. (ii) MCB 2 Pole 63 Amps, 415 volts, 50Hz, 10 KA = 05 Nos. (iii) Panel wiring for control circuit with copper flexible 1.5 Sq mm & power wiring minimum 10 Sqmm flexible.Note :-(i) Time duration for replacement of LT Panel should not be more than 4 Hours. (ii) Rate quoted are deemed to be inclusive of all the fixture /fittings including PCC cater above. |
| 19 | S&F in repairs including testing of swing out explusion fuse isolated assembly with fuse carrier out door type 11 KV supply 50 Amp (DO Fuse) including mounting bracket & post insulator complete all as specified and directed. |
| 20 | S&F in repairs transmission class type drop out fuses 11000 volts rating 25-50 amps,outdoor type complete all as specified and directed. |
| 21 | S&F in repairs lightening arrestors expulsion type complete with all fittings transmission class, discharge capacity 65 kilo amps, suitable for 11 KV complete all as specified and directed. |
| 22 | S&F Air break Switch insulator HT 11000 volts complete all as specified and directed. |
| 23 | Repairing/ Servicing the Air break isolating switch HT 11 KV 100/200 Amps by replacing the defective major spares including provn of minor bolts nuts etc complete all as specified and directed.Note :- Major spares will be measured & paid seperately under relevant item of Sch'A' (Item No 24 to 27) |
| 24 | Supply and fixing in repairs 11 KV Airbreak switch spares complete all as specified and directed as under :-(a) Male contact/moving Contact blade complete all as specified and directed. |
| 25 | (b) Female contact/Fix Contact Jaw complete all as specified and directed. |
| 26 | (c) MS jumper carrier complete all as specified and directed. |
| 27 | (d) Back Connector plate complete all as specified and directed. |
| 28 | Repairing/ Servicing the Air break isolating switch HT 33 KV 100/200 Amps by replacing the defective major spares including provn of minor bolts nuts etc complete all as specified and directed.Note :- Major spare will be measured and paid seperately under relevant item of Sch'A' (Item No 29 to 33) |
| 29 | Supply and fixing in repairs 33 KV Airbreak switch spares complete all as specified and directed as under :-(a) Male contact/moving Contact Blade complete all as specified and directed. |
| 30 | (b) Female contact/Fix Contact Jaw complete all as specified and directed. |
| 31 | (c) Rotating contactor pipe 400 ampere complete all as specified and directed. |
| 32 | (d) MS jumper carrier complete all as specified and directed. |
| 33 | (e) Back Connector plate complete all as specified and directed. |
| 34 | S&F in repairs drop out (DO) fuse unit expulsion type outdoor three pole 200 Amp suitable for HT 33 KV, comprising of 6 Nos post insulators, GI steel base mounting frame , GI nut, bolts etc with 30A , HT barrel type fuse complete all as specified and directed. |
| 35 | S&F in repairs including testing, and commissioning of gang operated type air break isolating switch horizontal / vertical type type mounting complete, double break and operation rod of suitable length 400 Amps capacity with 09 Nos post insulators and suitable for 33 KV HT supply, complete all as specified and directed. |
| 36 | S&F in repairs including testing, and commissioning of gang operated type air break isolating switch horizontal / vertical type type mounting complete, double break and operation rod of suitable length 400 Amps capacity with 09 Nos post insulators and suitable for 11 KV HT supply, complete all as specified and directed. |
| 37 | S&F in repairs lightening arrestor Zinc oxide gap less type, station class suitable for 33 KV / 10 KA complete with all fittings complete all as specified and directed. |
| 38 | S&F in repairs single post insulator, 33 KV with mounting spindle etc. complete all as specified and directed. |
| 39 | S&F in repairs Pin insulator, 33 KV with mounting spindle etc. complete all as specified and directed. |
| 40 | S&F in repairs disc insulator, 33 KV with hardware fittings etc.complete all as specified and directed. Please Enable Macros to View BoQ information |
| 41 | S&F in repairs disc insulator, 33 KV with hardware fittings etc.complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender