Tender For Special Repair And Certain Addn/Altn To Building P-64 And Certain Revenue Works Under Age B/R-Ii At Bb Cantt, Srinagar.
Tender Value
31.35 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
4 days left
EMD
62700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
srinagar → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair And Certain Addn/Altn To Building P-64 And Certain Revenue Works Under Age B/R-Ii At Bb Cantt, Srinagar.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M & L for rendering 10mm thick cement plaster in CM (1:6) on brick work or concrete surfaces finished even and smoothwithout using extra cement including taking down cement plaster and removing the debries out side MoD land, complete all as specified and directed |
| 2 | M&L for Preparation of newly plastered wall surfaces by using 2 mm thick white wall care putty to obtain smooth/ even finish surface using sand paper and applying two coats of oil bound distamper over a coat of primer, complete all as specified and directed. |
| 3 | M&L for Complete removing existing treatment including scraping,removing all mud,cake with wire brush and gunny bags from old plastered of wall/ceiling surfaces by applying 2 mm thick white wall care putty to obtain smooth/ even finish surface using sand paper and applying two coat Oil Bound Distember over a coat of primer complete all as specified and directected. |
| 4 | M & L for 15mm thick rendering in on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with WPC @2% by weight of cement or as per manufacturer’s instructions, finished even and fair,including taking down plaster and removing the debries out side MoD land,complete all as specified directed.Note : WPC shall be measured and paid separately. |
| 5 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over New surfaces including and over 2 mm thick white exterior acrylic wall care putty to obtain smooth/ even finish surface using sand paper, complete all as specified and directed.Note:- Work is to be executed in Buildings upto and including 3 storeys. |
| 6 | M&L for Complete removing existing treatment including scraping,removing all mud,cake with wire brush and gunny bags from old surfaces including and over 2 mm thick white exterior acrylic wall care putty to obtain smooth/ even finish surface using sand paperprepararion for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over, complete all as specified and directed.Note:- Work is to be executed in Buildings upto and including 3 storeys. |
| 7 | M&L for Preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 8 | M&L for Preparation of old painted wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.Note:- Work is to be executed in Buildings upto and including 3 storeys. |
| 9 | M & L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 10 | M&L for brickwork with old sized subclass 'B' bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 etc including demolition old brick work, complete all as specified and directed. |
| 11 | S&F 0.50 mm galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers, in roof, wall etc with grade of zinc coating 275, including dismantling of old CGI sheets, complete all as specified and directed. |
| 12 | S&F 0.50 mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, fixed with coach screws and washers, in roof, walI, including dismantling of old PGI sheets, complete all as specified and directed. |
| 13 | S & F Mild steel in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars,frame work for chowkhat of iron doors & windows including holdfast, ladders; railings frame work of water tanks and similar work welded, conforming to Fe-290-0 GdeE-165 complete, complete all as specified and directed. |
| 14 | M&L for wrought Second class hard-wood in scantlings frame work of timber scantlings 40 sq. cm and over in section, in any position unframed work, including dismantling of old timber scantling, complete all as specified and directed. |
| 15 | S&F khatamband pattern false ceiling, design as approved by GE with ornamental wood work made out of 1st class soft wood (Deodar) including fillets/cornices and 12mm thick BWR plywood and finally finishing with french polish (Two or more coats) including dismantling wall and ceiling boards (fibre, pulp, insulation, etc.), complete all as specified and directed. |
| 16 | Taking down frame with shutters (without taking off shutters from frame) n.exc 1.5 sq.m each, complete all as specified and directed. |
| 17 | Taking down frame with shutters (without taking off shutters from frame) exc 1.5 sqm but n.exc 4 sqm each, complete all as specified and directed. |
| 18 | S&F for 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 19 | S&F 30mm thick 2nd class hardwood factory made glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats including 300mm ordinary rat tail MS door springs including roller plates, complete all as specified and directed |
| 20 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections/ 3 truck and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed. |
| 21 | S&F Powder coating of any colour (Thickness of powder coating not less than 50 micron ) Anodised aluminium window and ventilator shutters fixed/sliding/side Hung type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handle , locking arrangement, Necessary Butt Hinges, Tower Bolts etc., complete all as specifried and as directed. |
| 22 | S&F 5.5 mm thick sheet glass Plain/Tinted of selected quality and glazing with aluminium & rubber beading in squares/rectangular window panes etc with complete fittings and fixtures, complete all as specifried and as directed. |
| 23 | S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staple or fixing with beads to wooden joinery when fixed in panels of joinery, complete all as specified and directed. |
| 24 | S&F in repair 4 mm thick sheet glass Tinted/frosted selected quality and glazing with aluminium & rubber beading in squares/rectangular window panes etc., complete all as specified and directed |
| 25 | S & F aluminum anodized, barrel tower bolt of extruded section 200mm long, ISI marked, complete all as specified and directed. |
| 26 | S & F 150 mm long, extruded aluminium alloy handle, fabricated type, complete all as specified and directed. |
| 27 | S & F 100mm long butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed. |
| 28 | S & F 300 mm aluminum anodised sliding door bolt, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete all as specified and directed. |
| 29 | M&L for Steel work in tubler trusses including special shaped washer etc complete including butt welded tubes confirming to IS-1161-1979 grade St-240, complete all as specified and directed. |
| 30 | S & F 18/19mm thick block boards, grade I quality, exterior grade, fixed with nails and screw to timer frame work in shelves of built in cup board, partition, pelmet box and similar work including dismantling of old board, complete all as specified and directed. |
| 31 | S&F 15mm thick second class hardwood boarding as in ceiling planed one side, with butt joints and fixed with nails including beading, filltets, cornices etc including dismantling of old boarding, complete all as specified and directed. |
| 32 | S&F 10-12mm thick 1st class softwood wooden(Australian) panelling fixed with tounged and grouted a wall panelling and including fillets/cornices and 9mm ply wood fixing on wall and two coat of warnishing, polishing and prerparation with sneezing, including dismantling old wall and ceiling boards (fibre, pulp, insulation, etc.), complete all as specifiedf and directed. Note :- (i) Diconnecting of electrical connections from main DB and removing all switch accessories including switch socket, sheet metal enclosures of all E/M nature (Fittings & Fixtures). (ii) Connecting and refixing of all electrical connections from main DB and fixing of switch accessories such as switch socket, sheet metal enclosure of all E/M nature (Fittings& Fixtures).(iii) Work is to be executed in double height building walls). |
| 33 | S&F 25mm thick second class clean ,swan softwood making aesthetic design fixed with nails in any situation as in eaves board,complete all as specified and directed. |
| 34 | Supplied and fixed ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete all as specified and directed. |
| 35 | S & F 100 mm size extruded aluminium handles fabricated type, anodised, complete all as specified and directed. |
| 36 | Material and labour for decorative moulding /beading 5mm thick and 25mm wide, of fancy type fixed to board/ply of any description complete, all as specified and directed. |
| 37 | S & F continuous (piano) hinge, mild steel bright finish or electro galvanised, width of flap when open 30 mm, complete all as specified and directed. |
| 38 | S & F 40 mm dia brass polished cup board knobs fixed with nut, screw and washer of mild steel, bright finished, complete all as specified and directed. |
| 39 | M & L for Second class hardwood plain fillets, square, rectangular or triangular in section of area exceeding 6 Sq. cm and not exceeding 13 Sq. cm, clean sawn, secured with nails or brads, complete all as specified and as directed. |
| 40 | S&F for wooden laminated flooring in strips of size 120 cm long and 20 cm wide and 6-8 mm thick, fixed with PVC sheet and cushion including fillets/cornices, laid over 12mm thick BWR plywood all as per manufracturer's instruction including dismantling old flooring, complete all as specified and directed. |
| 41 | M&L for Vitrified Ceramic tiles 10 mm thick dark shade(square/ rectangular) , polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and 15mm thick screed bed or bedding layer in CM 1:4, including dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) etc., complete all as specified and directed. |
| 42 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc complete all specified and directed. |
| 43 | M&L for coloured glazed ceramic tilesof size 1200x600x 7 to 8 mm thick, as in skirting/dado, wall, vertical serfaces etc. set and jointed in neat cement slurry with 5mm spacer & filling the joints with epoxy grout filling as per manufacture's instruction and pointed in white or colour cement to match the shade of tiles including 10mm thick backing coat in CM 1:4, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc., complete all as specified and directed. |
| 44 | M & L for plain cement concrete 1:2:4 Type B-1(using 20mm graded crushed stone aggregate) 50mm thick as in sub base, complete all as specified and as directed. |
| 45 | S&F 3 layer PPR Polypropylene random co polymer concealed pipes of 20mm outer dia SDR7.4 (PN16) UV stabilied and antimicrobial fusion welded having thermal stability for hot & cold water supply inclduing all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or in floors Taking up or down steel tubing and connections for 15mm dia, complete all as specified and directed |
| 46 | S&F 3 layer PPR Polypropylene random co polymer concealed pipes of 25 mm outer dia SDR7.4 (PN16) UV stabilied and antimicrobial fusion welded having thermal stability for hot & cold water supply inclduing all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or in floors Taking up or down steel tubing and connections for 20mm dia, complete all as specified and directed |
| 47 | S&F in repairs Wash Hand Basin (Vanity ) long patern type of 78cmx48cm including all fittings with decorative cabinet with Door/Shutter and 02 No drawers, complete all as specified and directed. |
| 48 | S&F in repair Vitreous China wash down water closet one piece pan (Pedestal pattern), white/colour (including all fitting all fixing bolts, flushing cistern, jet spray and flush pipe), complete all as specified and directed . |
| 49 | S&F in repair Health faucet mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube stainless steel with wall hook including making connections and fixed in position, complete all as specified and directed |
| 50 | S/F in repair shower rose chromium plated of 125mm size with swivel joints incvl, fixing to steel puipe or union of 15mm bore fixed in repairs, complete all as specified and directed. |
| 51 | S/F in repair, angle cock, 15mm dia chromium plated, cast copper alloy, fancy type, ISI marked, screwed down, high pressure with capstan head, screwed both ends for iron pipes or for unions, complete all as specified and directed. |
| 52 | S/F in repair brass tubular towel rail (finish Glossy), 20mm dia, D type, 60cm long between flanges , complete all as specified and directed. |
| 53 | S & F in repairs for Corner Glass shelf 30x300 mm (Big) 225 x 225 mm(medium) &150x150 mm (small) three set, complete all as specified and directed. |
| 54 | S & F glass shelf assembly consisting of glass shelf, 60cm long and 12 cm wide with CP bracket and guard railing fixed in repair, complete all as specified and directed. |
| 55 | S & F in repair PVC connections 450 mm long and 15mm dia with PTMT nuts and PVC washers on both ends, complete all as specified and directed. |
| 56 | S & F in repair PVC connections 600 mm long and 15mm dia with PTMT nuts and PVC washers on both ends, complete all as specified and as directed. |
| 57 | S & F 450mmx600mm size and 5.5mm thick looking mirror of selected quality, beveled edge glass mounted on 6mm thick AC building board with aluminium beading and rubber packing and fixed to wall with wooden plug with chromium plated brass screw and cup washer fixed in repair, complete all as specified and directed. |
| 58 | S & F in repair stainless steel sink 1.00mm thick, ISI marked for kitchen with plug, waste PVC pipe, washers including cantilever cast iron brackets connecting union waste pipe of size 485 mm x 410 mm with bowl size 410 mm x 350mm x 20 mm etc fixed in repair, complete all as specified and directed. |
| 59 | S & F in repair Sink mixer 2 in 1, chromium plated, fancy type with capstan head handle, screwed down high pressure with lettered hot and cold including CP brass flange and necessary extension nipple screwed for 15 mm dia pipe, complete all as specified and directed. |
| 60 | S&F in repairs 15mm bore Brass CP wall mixer 3 in 1 for mixing hot & cold water screwed down for iron pipe and fixed with all connected fittings & fixtures, complete all as specified and directed. |
| 61 | S & F brass chromium plated swan neck, hot and cold central hole, basin mixer for mixing hot and cold water, fancy type with capstan head handle, screwed down high for 15mm bore pipe or union fixed in repair, complete all as specified and directed. . |
| 62 | S& F in repair PVC floor trap, with grating including jointing to waste pipe fixed in plain cement concrete type B-1 (1:2:4) using 20mm graded crushed stone aggregate of 110 mm dia etc., complete all as specified and directed. |
| 63 | S&F 1000 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including brass float valve, gunmetal valve, tank nipple etc all as specified in SSR Part I and including dismantling PVC water tanks exc 250 litres and not exc 500 litres capacity etc., complete all as specified and directed. |
| 64 | M&L for plain cement concrete type C-1 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection and paving, 75mm thick, laid in slope finished even and fair without using extra cement incl making joints every 2.5m and corner filled with bitumen 85/25, complete all as specified and directed. |
| 65 | S&F 110 mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints fixed to walls & Taking down pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc.,complete all as specified and directed. |
| 66 | S&F 75 mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints fixed to walls Taking down pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed. |
| 67 | S&F PVC(SWR) 'S' trap any radius 110mm, complete all as specified and directed. |
| 68 | S&F in repair 25mm dia stainless steel drapery curtain rods, heavy duty, fancy type with fancy brackets doul rod hanger & domes (two in each door and window) complete all as specifeid and directed. |
| 69 | S&F PVC(SWR) vent cowl any radius 110mm, complete all as specified and directed. |
| 70 | Supply and fixing 18mm thick plain colour Celluka PVC board , as per approved shade and accessories as modular kitchen cabinet, complete all as specified and directed |
| 71 | Supply and fixing 18mm thick perlam colour PVC board for outer door, as per approved shade and accessories as modular kitchen cabinet, complete all as specified and directed |
| 72 | S&F PVC Cutlery sheet basket of size 17\\"x20\\"x4\\", complete all as specifed and directed. |
| 73 | S&F three Shelf pullout of size 12\\"x20\\"x21\\", stainless steel, complete all as specifed and directed. |
| 74 | S&F Kitchen Storage Accessories Tandem Pantry Pull Out Material-Stainless Steel,Powder Coated) (White & Chrome) , 450 mm stainless steel, 12 Basket and in 6 layers, complete all as specifed and directed. |
| 75 | S&F Cup and Sauccer basket of size 17\\"x20\\"x4\\" stainless steel, complete all as specifed and directed. |
| 76 | S&F Thali basket of size 17\\"x20\\"x8\\" stainless steel, complete all as specifed and directed. |
| 77 | S&F Plate basket of size 17\\"x20\\"x 6\\" stainless steel, complete all as specifed and directed. |
| 78 | S&F Plain basket of size 17\\"x20\\"x 8\\" stainless steel, complete all as specifed and directed. |
| 79 | S&F bottle basket of size 17\\"x20\\"x 6\\" stainless steel, complete all as specifed and directed. |
| 80 | S&F grain trolly with Mechanism of size 17\\"x20\\"x 14\\" stainless steel, complete all as specifed and directed. |
| 81 | S&F Wine Glass Rack Under Cabinet Holder Metal Wine Glass Organizer Glasses Storage Hanger for Bar Kitchen stainless steel, complete all as specifed and directed. |
| 82 | S&F swing Corner Cabinet width 1200 mm, outer adjusting left/right, Swing Tray with Solid Base and Soft Close, Stainless Steel, Loading Capacity Upto 60 kg including fitting and fixtures complete all as specified and directed. |
| 83 | S&F Gola profile, Aluminium Handles Stainless Steel colour for doors of Kitchen Cabinets, complete all as specified and as directed. |
| 84 | S&F auto close concealed hinges, Stainless Steel, complete all as specified and as directed. |
| 85 | S&F Channel 500 mm x 18\\" EDS Standard , Stainless Steel, complete all as specified and directed. |
| 86 | S&F High Rails , 250mm telescopic ball bearing drawer chaneels, Stainless steel 500mm long, complete all as specified and as directed. |
| 87 | Excavation in trenches in soft /loose soil,n exc 1.5m wide and n exc 1.5m in depth ;for foundation etc.or for shafts well cesspit,maholes, pier holes etc.n exc 10 sqm on plan and n exc 1.50m in depth, complete all as specified and directed. |
| 88 | Returing filling in including spreading, levelling, watering & well ramming in layers not exc 25cm, complete all as specified and directed. |
| 89 | Removing excavated material nexc 250m and n exc 500 m and depositing where directed at a level n exc 1.5m above the starting point, complete all as specified and directed. |
| 90 | M&L hard core with broken stone or boulders of gauge 63 mm but n exc.100mm, deposited spread & levelled in layers n.exc 15 cm thick water & rammed true surface, complete all as specified and directed. |
| 91 | M&L for plain cement concrete 1:4:8, type D2 (using 40mm graded crushed stone aggregate) as in foudnation, subbase filling and mass concrete, complete all as specified and directed. |
| 92 | M&L for reinforced cement concrete (nominal mix) Type-B-1 (1:2:4) using 20mm graded aggregate) as in foundation raft,footings, foundation beam , plinth beams , bases for columns etc., complete all as specified and directed |
| 93 | M&L for reinforced cement concrete (nominal mix) type B1 1:2:4 (using 20mm graded stone aggregate) Slabs supported on walls, lintle beams and columns in , roofs, landings, balconies, canopies, deck slabs and in shelves and the like including use and waste forwork, complete all as specified and directed. |
| 94 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finish, complete all as specified and directed. |
| 95 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions, fair finish, complete all as specified and directed. |
| 96 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders,bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floor and beam etc., complete all as specified and directed. |
| 97 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 98 | S & F TMT steel bars 6 to 8 mm dia in stirrups, spacers and binders including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia , complete all as specified and directed. |
| 99 | M&L for brickwork with old sized subclass 'B' bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 etc., complete all as specified and directed. |
| 100 | M&L for plain cement concrete1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in lintels upto 1.5 clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers ,apex stones, bed plates, water troughs and the like including use of formwork (straight or curved) ,including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.Note :-Reinforcement where provided shall be measured and paid seprately. |
| 101 | M & L for rendering 15 mm thick cement plaster in CM (1:6) on brick work or concrete surfaces finished even and smoothwithout using extra cement, complete all as specified and directed. |
| 102 | M & L for rendering 15mm thick in CM 1:4 on stone masonry / brick surface finished even and smooth without using extra cement with liquid water proofing admixture, complete all as specified and directed.Note : WPA to be measured and paid separately. |
| 103 | Material and labour for preparation of new surface externally of wall and applying 1 to 2mm wall care puty and Two or more coats of 100% Premium acrylic emulsion paint (Weather coat) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm (weather proof/weather coat) without any brush marks on the surface in any colour over a coat of 2mm thick plaster of paris putty to make plastered surfaces even and smooth, complete all as specified and directed. |
| 104 | S & F mild roof structural steel angles/rectangular hollow section/steel tubular roof trusses (framed), purlines and fastening including distance pieces etc., complete all as specified and directed. |
| 105 | S&F Pre-paintednainital pattern galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws,complete all as specified and directed. |
| 106 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws,complete all as specified and directed. |
| 107 | S & F of Powder coating of any colour (Thickness of powder coating not less than 50 micron ) anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as door stopper (1 No.). hinges type B-21 125mm long (3 Nos.) suitable handles including Mortice locking arrangment including frosted glass in upper pane and ACP sheet in lower Pane .) for each shutter, complete all as specified and directed. |
| 108 | S&F 10-12mm thick 4 inch complete knot free polished with P U material glossy finish 1st class softwood wooden(Australian) panelling fixed with tounged and grouted a wall panelling and including fillets/cornices and 9mm ply wood fixing on wall, complete all as specified and directed. |
| 109 | M&L for rubber moulded chequered cement concrete tiles 30cmx30cmx25mm thick with grey cement and pigments laid over and including 20mm thick screed bed or bedding layer in cement mortor (1:6) over 75 mm thick plain cement concrete (1:4:8) type D2 (using 40mm graded crushed stone aggregate), set, jointed and pointed in neat cement slurry, complete all as specified and directed. |
| 110 | M&L for Vitrified Ceramic tiles 10 mm thick dark shade(square/ rectangular) , polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 10mm thick screed bed or bedding layer in CM 1:4, complete all as specified and directed. |
| 111 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in CM 1:6, complete all specified and directed. |
| 112 | M&L coloured glazed ceramic tiles of size 1200x600x 7 to 8 mm thick, as in skirting/dado, wall, vertical serfaces etc. set and jointed in neat cement slurry with 5mm spacer & filling the joints with epoxy grout filling as per manufacture's instruction and pointed in white or colour cement to match including 10mm thick backing coat in CM 1:4, complete all specified and directed. |
| 113 | S&F Wash Hand Basin (Vanity ) long patern type of 78cmx48cm including all fittings with decorative cabinet with Door/Shutter and 02 No drawers, complete all as specified and directed. |
| 114 | S&F Vitreous China wash down water closet one piece pan (Pedestal pattern), white/colour (including all fitting all fixing bolts, flushing cistern, jet spray and flush pipe) complete all as specified and directed . |
| 115 | S & F shower rose chromium plated of 125mm size with swivel joints incvl, fixing to steel puipe or union of 15mm bore, complete all as specified and directed. |
| 116 | S & F angle cock, 15mm dia chromium plated, cast copper alloy, fancy type, ISI marked, screwed down, high pressure with capstan head, screwed both ends for iron pipes or for unions, complete all as specified and directed. |
| 117 | S & F brass tubular towel rail (finish Glossy), 20mm dia, D type, 60cm long between flanges , complete all as specified and as directed. |
| 118 | S & F Corner Glass shelf 30x300 mm (Big) 225 x 225 mm(medium) &150x150 mm (small) three set, complete all as specified and as directed. |
| 119 | S & F glass shelf assembly consisting of glass shelf, 60cm long and 12 cm wide with CP bracket and guard railing fixed in repair complete all as specified and directed. |
| 120 | S & F PVC connections 450 mm long and 15mm dia with PTMT nuts and PVC washers on both ends, complete all as specified and directed. |
| 121 | S & F PVC connections 600 mm long and 15mm dia with PTMT nuts and PVC washers on both ends, complete all as specified and directed. |
| 122 | S & F 450mmx600mm size and 5.5mm thick looking mirror of selected quality, beveled edge glass mounted on 6mm thick AC building board with aluminium beading and rubber packing and fixed to wall with wooden plug with chromium plated brass screw and cup washer, complete all as specified and directed. |
| 123 | S&F 15mm bore Brass CP wall mixer 3 in 1 for mixing hot & cold water screwed down for iron pipe and fixed with all connected fittings & fixtures, complete all as specified and directed. |
| 124 | S/F brass chromium plated swan neck, hot and cold central hole, basin mixer for mixing hot and cold water, fancy type with capstan head handle, screwed down high for 15mm bore pipe or union, complete all as specified and directed. |
| 125 | S& F PVC floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) of 110 mm dia etc., complete all as specified and directed. |
| 126 | S&F 1000 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including brass float valve, gunmetal valve, tank nipple etc all as specified in SSR Part I, complete all as specified and directed. |
| 127 | S&F 110 mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints fixed to walls including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed. |
| 128 | S&F 75 mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints fixed to walls including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed. |
| 129 | M&L for taking down carefully existing old burnt out / unserviceable aluminium / copper point wiring system any type/ size and any description complete for light, fan,bell,socket, power points etc complete including removing the all type of fittings & fixture alongwith it connected fixing acessories such as all switches, sockets, ceiling roses, holder,regulators,bell etc complete and removing of all the old materials from the site for to taking as a schedule of credit, complete all as specified and directed. |
| 130 | Dismantling unserviceable main switch/DBs with MCBs, complete all as specified and directed. |
| 131 | M&L for making single phasing point wiring system used as copper conductor wire for phase and neutral wiring system the wire made out of PVC insulated FRLS of 1100 volt grade with having multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) ISI marked drawn through wiring system concealed or on surface wall with the help of heavy duty ISI mark PVC conduit pipe ISI mark in any lengthy wiring system and along with its all connected fittings accessories including providing of pressed steel terminal sunken boxes or heavy duty PVC box and duly fixed it concealed in wall and alongwith providing of back and face top covered plate frame or electro plated plastic laminated sheet for housing / mounting of any type/size switches sockets, regulators etc and including using /drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI marked with multistranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making the good to all disturbed surfaces of wall/ceiling area of new wiring system and to match to it as per the existing surface of wall/ceiling etc., complete all as specified and directed fot rhe following:- |
| 132 | One one light point / fan point wiring system controlled by one way switch, complete all as specified and directed. |
| 133 | One 5 Amp socket outlet point wiring system fixed on same board & controlled by one way switch, complete all as specified and directed. |
| 134 | One 5 Amp socket outlet point wiring system fixed on independent board & controlled by one way switch, complete all as specified and directed. |
| 135 | Description all as per serial item No 131 bhere-in-before, but using PVC insulated FRLS wire 1100 volt grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) ISI Marked for power socket point on indenpent board point wiring system and also providing of 2.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI Marked with multistranded copper conductor wire used as a continuous earth wire for power point wiring system, complete all as specified and directed. |
| 136 | Supply & fixing of modular type switch 5/6 Amps 220 Volts AC,one module , complete all as specified and directed. |
| 137 | Supply and fixing of modular type socket of 5/6 Amps 220 Volts AC, 3/5 multi pin type with two modular, complete all as specified and directed. |
| 138 | Supply and fixing of modular type switch of 15/16 Amps 220 Volts AC one module , complete all as specified and directed. |
| 139 | Supply and fixing of modular type socket of 15/16 Amps 220 Volts AC 5/6 multi pin type with two modular, complete all as specified and directed |
| 140 | Supply & fixing of modular type switch 5/6 Amps 220 Volts AC,one module , 2 way , complete all as specified and directed |
| 141 | Supply and fixing of one/two modular type step type electronic fan regulator with having hum free step alongwith speed control know, complete all as specified and directed |
| 142 | Supply and fixing ceiling rose three terminals type made out of polycarbonate , isolated body, complete all as specified and directed |
| 143 | Supply and fixing in replacment of LED tube light fitting of 1x 20W/22W 220V AC decorative box type with driver, holder including LED tube light with having energy efficient type use in both warm/white type colour complete including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting comlplete and including taking down old fitting, complete all as specified and directed. |
| 144 | Supply and fixing of surface wall mounted decorative bracket light fitting with having stainless steel rust free fixture with white glass diffuser alongwith bulb holder based adhaptor suitable used for 7.5W / 9 W LED filament lamp E27 base system including providing of 1N x 9W LED lamp in required fitting use in both warm/white type colour complete light fitting set and including providing of suitable type of flate fexible two/three core cable and making electric connection, complete all as specified and directed. |
| 145 | Supply and fixing in replacment of LED mirror light fitting with high out put diffuuser 2 feet long of 10 Watt 220 volt AC decorative type with driver holder and LED lamp with having energy efficient type use in both warm/white type colour complete light fitting set all as per existing fitting type/ size of sample /model and make and including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting and makong electric connection and including taking down of old fitting all as specified and directed. |
| 146 | Supply and fixing surface mounted LED decorative type angle adjustable sport light / bed side study lamp light fitting with lamp in matt finish for premium aesthetics with based of suitable rating capacity 7Watt LED fixture in required fitting use in both warm/white type colour complete light fitting set and including providing of suitable type of flate fexible two/three core cable and making electric connection complete all as specified and directed. |
| 147 | Supply and fixing recessed/ceiling concealed/Surface mounted down lighter light fitting of round/Square flate shapes decorative type with high efficiency PMMA fiffuser soft glare free light with drivers & LED luminaire of rating capacity in 15Watt to 18Watt 220 volt AC complete light fitting set all as per existing fitting type/ size of sample /model and make and including making in cutting or additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete including making in additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete and also providing of suitable type of flate fexible two/three core cable and makong electric connection and including taking down of old fitting all as specified and directed. |
| 148 | Supply and fixing of sheet metal enclosure duly powder coated with single pole and neural enclosure with having a two pin and earth plug & top and mounting chanel alongwith one 01 MCB SP 20 Amp and dully fixed surface on wall or concealed in wall and making all necessary electrical connection including taking down of existing DBs a as required at site, complete all as specified and directed |
| 149 | Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type of distribution board of rating SPN 4/6 way type 220 volt AC supply system and having neutral and earth link bus bar and mounting base chanel suitable for holding MCBs incommer and s outgoing system complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs complete all as specified and directed |
| 150 | Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type of distribution board of rating SPN 8 way type 220 volt AC supply system with IP protection rating with ISI marked and having neutral and earth link bus bar and mounting base chanel suitable for holding MCBs incommer and s outgoing system complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs, complete all as specified and directed |
| 151 | Supply and fixing of MCB SPN 40 to 63 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection complete including taking down of old MCB, complete as specified and directed. |
| 152 | Supply and fixing of MCB SP 40 to 63 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection complete including taking down of old MCB, complete all as specified and directed |
| 153 | Supply and fixing of MCB SP 06 to 32 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection complete including taking down of old MCB, complete all as specified and directed. |
| 154 | Supply and fixing of Sub main wiring system with two runs PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size 2 Run of 10 Sqmm and 1 Run of 10 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy duty ISI mark PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall including taking down old unservicable sub main wiring system complete and making good all disturbed surfaces match to the existing surface, complete all as specified and directed. Note: 3 runs of 10 sqmm cable and one run of conduit/ casing capping shall be measured and paid as one unit. |
| 155 | Supply and fixing of Sub main wiring system with two runs PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size 2 Run of 4Sqmm and 1 Run of 4 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy duty ISI mark PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall including taking down old unservicable sub main wiring system complete and making good all disturbed surfaces match to the existing surface, complete all as specified and directed. Note: 3 runs of 4 sqmm cable and one run of conduit/ casing capping shall be measured and paid as one unit. |
| 156 | Supply and fixing electric geyser storage type steel body with copper inner tank and heating element upto 2 KW suitable for capacity 25 Litres, BEE 5 star rated complete with all accesories such as safety valve, thermostate , NRV,PVC Connection and fixed to wall with MS fastner ,nut bolts and making electric connection, complete all as specified and directed. |
| 157 | S&F star rated electric ceiling fan 1200mm sweep min air delivery 210 CFM with service value 6.0 BEE norms 5 star rating with bruhless direct current motor (BLDC) of single phase 230 volt AC alongwith blade, down rod, canopy, clamps with reel insulator, electronic regulator & accessories and MS fan hook fixed in ceiling/roof including providig flate flexible copper wire and making all electrical connection, complete all as specified and directed. |
| 158 | Supply fixing and comissioning and testing of star rated of electric ventilation exhaust fan of size 200 mm sweep complete AC single phase 230 volt and made out of sturdy engineering plastic body complete with blade and louvers with shutter and also providing or making of suitable type/size of hole on wall out of any type of wall constraction work for installation /fixing of exhaust fan after fan fixing work making good to all diturbed hole surface area of wall/ceiling and floor area of hole system and to match/dressing to it as per the existing surface os wall/floor/ceiling etc by cement plastering work, complete all as specified and directed. |
| 159 | Supply and fix recessed/ceiling concealed mounted down lighter light fitting of round/Square flate shapes decorative type with high efficiency PMMA fiffuser soft glare free light with drivers & LED luminaire of rating capacity in 15 Watt to 18 Watt 220 volt AC complete light fitting set all as per existing fitting type/ size of sample /model and make and including making in cutting or additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete including making in additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete and also providing of suitable type of flate fexible two/three core cable and making electric connection, complete all as specified and directed. |
| 160 | Supply and fixing LED mirror light fitting with high out put diffuuser 2 feet long of 10 Watt 220 volt AC decorative type with driver holder and LED lamp with having energy efficient type use in both warm/white type colour complete light fitting set all as per existing fitting type/ size of sample /model and make and including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting and making electric connection, complete all as specified and directed. |
| 161 | Supply and fixing of LED tube light fitting of 1x 20W/22W 220V AC decorative box type with driver, holder including LED tube light with having energy efficient type use in both warm/white type colour complete including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting comlplete fitting, complete all as specified and directed. |
| 162 | Supply and fixing of surface wall mounted decorative bracket light fitting with having stainless steel rust free fixture with white glass diffuser alongwith bulb holder based adhaptor suitable used for 7.5W / 9 W LED filament lamp E27 base system including providing of 1N x 9W LED lamp in required fitting use in both warm/white type colour complete light fitting set and including providing of suitable type of flate fexible two/three core cable and making electric connection, complete all as specified and directed. |
| 163 | Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type of distribution board of rating SPN 12 way type 220 volt AC supply system with IP protection rating with ISI marked and having neutral and earth link bus bar and mounting base chanel suitable for holding MCBs incommer and s outgoing system complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection, complete all as specified and directed. |
| 164 | Supply and fixing of MCB SPN 40 to 63 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection, complete all as specified and directed. |
| 165 | Supply and fixing of MCB SP 40 to 63 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection, complete all as specified and directed. |
| 166 | Supply and fixing of MCB SP 06 to 32 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection, complete all as specified and directed. |
| 167 | Supply and fixing of Sub main wiring system with two runs PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size 2 Run of 4 Sqmm and 1 Run of 4 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy duty ISI mark PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall , complete all as specified and directedNote: 3 runs of 4 sqmm cable and one run of conduit/ casing capping shall be measured and paid as one unit. |
| 168 | Supply, laying and testing of LT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volt grade cross sectional area of size 16 sqmm 2 core including laid in trenches or fixing on poles or passing through pipes, complete all as specified and directed. |
| 169 | M&L for locally available river sand in trenches 15 cm below cable and 8cm above / around UG cable for cable protection, in duct under and above the cables including punning around cable complete all as specified and directed.Note: - Punned thickness shall only be measured and paid. |
| 170 | Supply and laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other, complete all as specified and directed. |
| 171 | Notes :-An amount of Rs 59,177.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 27, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender