Tender For Special Repairs Of Certain Bldg Under Ge North Binnaguri
Tender Value
85.95 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
11 days left
EMD
1.54 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs Of Certain Bldg Under Ge North Binnaguri
BOQ
| Sl. No. | Item Description |
| 1 | PART-I : (B/R WORKS) Taking down chowkats with shutters (without taking off shutter from the frames) not exceeding 1.50 Sqm each complete all as specified and directed. |
| 2 | Taking down chowkats with shutters (without taking off shutter from the frames) exceeding 1.50 Sqm but not exceeding 4.00 Sqm each complete all as specified and directed.(Note for Item No. 1.00 & 2.00 - Rate shall be deemed to be include for cutting holes/demolition of masionry walls etc for taking down chowkats and making good the damaged surfaces). |
| 3 | Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each, complete all as per specified and as directed. |
| 4 | Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, approaches, dado/Partitions etc, complete all as per specified and as directed. |
| 5 | Demolition of cement concrete (un-reinforced) as in ground floors and pavings not exceeding 15cm thickness (below or above ground level) or in sunken floor complete all as specified and directed. |
| 6 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of roofs, floors (other than ground floors), beams, stair cases, landing, chajja and similar suspended work complete all as specified and directed . |
| 7 | Taking down cement plaster of any description on brick or stone or concrete surface of wall & celing etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 8 | Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same to a distance exceeding 500 m and not exc. 900 m including roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc, complete all as specified and as directed. |
| 9 | Taking down eaves gutters and rainwater pipes CI/PVC/AC soil pipe including all fittings, heads, shoes, bends, swan-necks, etc. (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 10 | Dismantling water tanks and removing to store of capacity exc 250 & n . Exc 500 ltrs, complete all as specified and directed. |
| 11 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed. |
| 12 | Rough excavation not exceeding 1.5 m deep and getting out in soft/loose soil complete all as per specified and as directed. |
| 13 | Returning, filling in, including spreading leveling, watering and well ramming in layers not exceeding 25cm, soil complete all as specified and directed. |
| 14 | Removing surplus excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting points in soft/loose soil complete all as specified and directed. |
| 15 | M&L for sand cushioning to under ground cable in trenches/existing cable trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep including required watering and consolidation after laying and stretching the cable complete all as specified and directed. (Note: Only punned down volume of sand to be measured) |
| 16 | M&L for PCC (1:2:4) type B-1 (using 20 mm grade crushed stone aggregate) as in water tank platforms, filling and mass concrete, complete all as specified and as directed. |
| 17 | M&L for PCC (1:2:4) type B1 (20mm graded aggregate) as in slabs, landing, shelves chajjas and in roof kerbs, slightly rounded or chamfered on edges, mixed with water proofing compound 200 ml per beg of cement or as per manufacturer instructions finished even and smooth on exposed concrete surface without using extra cement, complete all as specified and as directed.(Note: Water proofing compound shall be measured and paid separately under relevant item of this schedule). |
| 18 | M&L for reinforcement cement concrete (1:1.5:3) type A1 (using 20mm graded stone aggregate) as in chajja & similar work complete all as specified and directed.Note- Reinforcement and from work shall be measured and paid separately. |
| 19 | M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement morter 1:4 complete all as specified and directed. |
| 20 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as per specified and as directed. |
| 21 | M & L for Cutting holes Superficial area n exc. 150 sq. cm into or through brick walls built in in cement mortar making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required, complete all as per specified and as directed. |
| 22 | M&L for brick work with sub class 'B' bricks, straight or curved on plan exc. 6m mean radius in cement mortar 1:6, complete all as per specified and as directed. |
| 23 | M&L for brick covering with width equal to length of brick as protection to cable with well burnt sub class ‘B’ bricks of size 230mm x 125mm x .75mm laid dry flat complete all as specified and directed. |
| 24 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or sloping) including edges rough finished surface of concrete flat complete all as per specified and as directed. |
| 25 | M&L for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in copings, bed block for filling hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stone, bed plates, water troughs and the like including weathering, slightly rounded or champfered angles and throating as directed including necessary form work as required complete all as specified and directed. |
| 26 | S&F 35mm flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both side, one face is covered with decorative face veneer with not less than 5mm thick lipping alround etc complete all as specified and as directed. |
| 27 | Supply only integrated liquid water proofing compound complete all as specified and as directed. |
| 28 | S&F of 30 mm thick flush door shutters solid core construction with block board and plywood face panel, commercial type with both side etc complete all as specified and as directed. |
| 29 | Supply and fixing Factory made partly glazed three panels i.e. panel will be of wire mesh and further divided into two pannels fitted externally in the clear space & lower pannel will be plain colour PVC sheet 5 mm thick PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 30 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 40 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length, complete all as specified and as directed.Note: (a) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately.(b) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 31 | Supply and fixing of factory made solid panel factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face , supplying & fixing in frame at site as per specification & drawing complete all as per specified and as directed. |
| 32 | S&F of 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 33 | S & F in repair table top wash hand basine, of size not less than 480 x 470 x 195 mm including 32 mm size brass chromium plated waste coupling all fixing assoseries complete all as specified and as directed. |
| 34 | S&F of 300 mm aluminum alloy, anodised , sliding door bolt with hasp and staple (bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed complete all as specified and directed. |
| 35 | S&F of floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor (overall length of cover plate 140mm) complete all as specified and as directed. |
| 36 | S& F 100 mm but hinges stainless steel complete all as specified and as directed. |
| 37 | S&F of 200 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 38 | S&F Aluminium handles, 150 mm size cast type, anodised complete all as specified and directed. |
| 39 | S&F of 150 mm long aluminium anodised extruded alloy handle fabricated type(IS-208: 1996) complete all as specified and directed. |
| 40 | S & F repair stainless steel curtain rods 25 mm dia , anodised aluminium alloy with fixing brackets ,stops, and complete fitments complete all as specified and as directed. |
| 41 | S&F in repairs of brass chromium plated tubular towel rail, 20mm dia, D-type, 60cm long between flanges complete all as specified and directed. |
| 42 | S & F powser coated aluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium section weighing not less than 1.25 kg /m for frame and 0.55 kg/m for shutter including necessary jointing cleats, rubber packing, screws, handle, locking arrangement and 5.5 mm thick / tinted glass and aluminium mosquito proof gauge including taking down of old existing steel window and making good disturbrd surface of wall complete all as specfified as directed. |
| 43 | S & F powser coated aluminium louvered ventilators of size not exc. 0.50 Sqm. Area with glass louvers , without sash bars of aluminium section weighing not less than 0.650 kg/ mfor frame of size 40 x 20 x 2 mm including necessary jointing cleats , glazing cleats,rubber packing, anodside aluminium fittings and 5.5 mm thick tinted glass fixed panels with suitable locking arrangements including taking down of old existing steel ventilators and making good disturbed surface of wall complete all as specified and as directed. |
| 44 | S&F in repair of MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and as directed. |
| 45 | S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed. |
| 46 | S & F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed. |
| 47 | Mild Steel TMT bars 10 mm dia and over cut to length bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 48 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed. |
| 49 | S&F Pressed steel frames of size not less than 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including one shop coat of priming complete all ,as specified and directed. |
| 50 | S&F of Pressed steel frames of size not less than 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as per specified and as directed. |
| 51 | Material and labour for water proofing treatment with following application over roofs surface complete all as specified and directed : - (i) Applying bituminous primer at the rate of 0.4 Litres/Sqm on prepared surfaces of roof. Surface shall be kept free, till the primer is impregnated and the solvent oil in the primer get evaporated.(ii) Applying one coat of blown type bitumen of grade 85/25 as binding material at the rate of 1.2 Kg/Sqm.(iii) Laying 3mm thick APP polymeric water proofing membrane of weight not less than 3.0 Kg/Sqm, black finish reinforced with non woven polyester matt, with a thermos fusible finish, torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturers instruction including preparation of surface.(iv) Top of membrane shall be provide with solar reflective bituminous aluminium paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.Note :- The water proofing treatment shall be carried out by the manufacturer or his authorised applicators in terms of clause 11.43 of MES Sch Part-I (2009). |
| 52 | M&L for machine cut Kota stone slab flooring 18-20 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over 20 mm thick screed bed or bedding layers in CM 1:4, complete all as specified and as directed. |
| 53 | M&L for machine cut Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 10 mm thick screed bed or bedding layers in CM 1:4 complete all as specified and as directed. |
| 54 | M&L for 100 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub base of floor complete all as specified and directed. Please Enable Macros to View BoQ information |
| 55 | M&L for 100 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub base of floor complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender