Tender For Special Repair To Bldg No Np-14 (A To H) At Moti Mandir Enclave Of 16 Csr At Nagrota Mil Stn Under Ge Nagrota
Tender Value
45.50 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
2 days left
EMD
91000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No Np-14 (A To H) At Moti Mandir Enclave Of 16 Csr At Nagrota Mil Stn Under Ge Nagrota
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 12-Aug-2026 | AMENDMENT TO CRITICAL DATES | Date | 25-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each and removing from site complete all as specified and directed. |
| 2 | Taking down chowkats & shutter exceeding 1.5 Sqm and n exc 4 Sqm removing from site complete all as specified and directed. |
| 3 | Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and directed. |
| 4 | Taking down shutters of any description n exc. 1.00 Sqm each, complete all as specified and directed. |
| 5 | S & F Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 125x60mm complete all as specified and directed. |
| 6 | S & F Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 105x60mm complete all as specified and directed. |
| 7 | S&F 40mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side With one face is covered with deco rative face veneer with lipping/frame to match complete all as specified and directed. |
| 8 | S&F Magic eye with magic glass of all steel body complete all as specified and directed. |
| 9 | S&F Factory made, 35mm thick 2nd class hard wood, plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete all as specified and directed. |
| 10 | S&F 35mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepared to receive glass ,gauge etc ( without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8 clause 8.20(a), supplied and fitted to chowkats complete all as specified and directed. |
| 11 | M&L for applying two coat of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description, not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed. |
| 12 | S&F 18/19mm thick solid PVC board prelaminated one side and other side plain as in cupboard shutter ( Board must be water proofing ,termite proof) complete all as specified and directed. |
| 13 | M&L for 18/19mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work incl 0.90mm thick decorative laminate type both of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer'steak wood beading with lipping/frame fixed with screws to timber frame work including 100mm size hasp and staple safty type with pino hinges and magnetic ball catches,handle other connectiong acceseries complete all as specified and directed. |
| 14 | S&F Solid PVC Door Frames of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 15 | Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain PVC sheets for top rail lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheetto be fitted in the MS frame welded/sealed to the styles and rails with suitablePVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawings complete all as specified and directed. |
| 16 | S & F Box type Steel windows with double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded before fixing Drg No:CEUZ/TD/1302/2009 Sheet No-1/3 to 3/3 complete all as specified and directed. |
| 17 | S & F Box type Steel ventilators top hung double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded Drg No:CEUZ/TD/1302/2009 Sheet No-1/3 to 3/3 complete all as specified and directed. |
| 18 | M&L of two coat of synthetic enamel paint over one coat of red oxide on new steel surfaces of any description over 10cm in width or girth incl preparation of surfaces complete all as specified and directed. |
| 19 | M&L one coat of synthetic enamel paint on steel surfaces of any description not otherwise described over 10cm width or girth including preparation of old steel surfaces complete and all as specified and directed |
| 20 | S & F Stainless steel wire cloth.0.36mm Nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 21 | S&F Sheet glass 3mm thick, ordinary quality and glazing fixed with aluminium section in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 22 | S & F 3mm Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 23 | M&L PCC 1:3:6 type C1 in hold fast etc incl all necessary formwork complete all as specified and directed. |
| 24 | S&F in repair harrison rails, stainless steel chromium plated with fixing brackets, stops, roller etc, complete all as specified and directed. |
| 25 | S& F 1st class hard wood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each complete all as specified and directed. |
| 26 | S&F 100 mm long butt hinges (medium weight) colled rolled Aluminium alloy complete all as specified and directed. |
| 27 | S&F 75 mm long butt hinges (medium weight) colled rolled Aluminium alloy complete all as specified and directed. |
| 28 | S&F Extruded aluminium alloy handles fabricated type anodised of size 125mm long 12mm dia complete all as specified and directed. |
| 29 | S&F MS 300 mm ordinary rat rails rod pattern springs including roller and roller plate complete all as specified and directed. |
| 30 | S&F Hasp and staple Alumnium anodised lncluding bolt to hinges plate 100mm size complete all as specified and directed. |
| 31 | S&F 250mm long aluminium alloy, anodized sliding door bolt with hasp stapple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 32 | S&F Aluminium anodized 150mm long barrel tower bolt of extruded section and fixed complete all as specified and directed. |
| 33 | S&F iron 6 pin cloth Hanger Wall Mounted Door Mounted Bathroom Cloth Wall Hook, Door Hooks Rail for Hanging Keys, Ivory complete all specified and directed. |
| 34 | S & F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 35 | Demolition of cement concrete (unreinforced) in ground floors and paving not exc 15cm thickness.(below or above ground level) complete all as specified and directed. |
| 36 | M & L for 25mm thick PCC 1:2:4 type B-1 as a sub base to receive topping layer finished even and rough complete all as specified and directed. |
| 37 | M & L for Ceramic tiles 7 to 8 mm thick colored tiles area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or beddding layer of CM 1:6, 15 mm thick over complete all as specified and directed. |
| 38 | All as per Srl item No 37 above but vertical surfaces such skirting ,dados, rises to steps etc over 10mm thick rendering in cement mortar in CM 1:6 complete all as specified and directed. |
| 39 | M & L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry andpointed in white or coloured cement to match over 10mm thick rendering in cement mortar in 1:6 complete all as specified and directed. |
| 40 | Dismantling floor,hearth or wall tiling including cement mortar bedding(but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 41 | M&L glazed coloured ceramic tiles of size (450mm x 350 mm) x 7 mm thick, on vertical surfaces, such as dadoes, etc set and jointed in neat cement slurry and pointed white or coloured cement to match with the shade of tiles over 10mm thick plater CM 1:4 complete all as specified and directed. |
| 42 | M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded curshed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed. |
| 43 | M&Lfor Roghening surfaces of old concrete surfaces of any description over damaged surfaces irregular fascia, chajjas and in similar work and also for narrow width etc and rendering dubbing coat 15mm thick cement plaster in CM (1:4) over a coat of cement slurry @ 3.00 Kg/Sqm making surface even finished complete all as specified and directed. |
| 44 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed. |
| 45 | M&L for Machine cut kota stone flooring 20-22mm khick laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing (mirror finish) (Each stone not less than 55 cms x 55 cms) over 15mm thick screed bed in CM ( 1:4) as in floor finished, complete all as specified and directed. |
| 46 | M&L for Machine cut kota stone slab 20-22mm thick in skirting, dado and pillar laid and riser of stair case size (0.90-1.00x 18-25cm) jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing (mirror finish) over 15 mm thick rendering in CM ( 1:4),complete all as specified and directed. |
| 47 | M&L Makrana white marble 18- 20mm thick machine cut, bedded jointed and pointed with white cement slurry including cutting and polishing types (mirror finish) over 15mm thick screed bed in CM ( 1:6) as in floor finished, complete all as specified and directed. |
| 48 | M & L for 60 cm wide Udaypur green stone 15 to 18 mm thick. (table rubbed and polished) as in cooking plateform of size not less than 2 m in length, incl cutting for sink over 20 mm thick screed in CM 1:4 including roughing of existing surface and applying a coat of cement slurry @ 03 Kg/Sqm of surface and pointing with white cement 1:2 using marble dusts admixture of pigment to match complete all as specified and directed. |
| 49 | All as per Srl item No 48 above but of size 550x 75 - 100mm (as on edges of cooking plateform complete all as specified and directed. |
| 50 | Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc. complete all as specified and directed. |
| 51 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement ( internally) complete all as specified and directed. |
| 52 | M&L for Rendering 15mm thick on other fair faces of brick work or concrete surfaces in CM 1:4 finished using wpc ( WPC to be 5mm thick plaster paid measured and seperately) even and smooth without using extra cement (Externally) complete all as specified and directed. |
| 53 | M&L for Rendering 5 mm thick in CM (1:3) on ceiling finished even and smooth without using extra cement including two coat of white wash on ceiling including preparation of surface complete all as specified and directed. |
| 54 | Supply only integral water proofing compound complete all as specified and directed. |
| 55 | M&L for Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of wall putty 2 to 3mm thick on plasterd surfaces preparatory to distempering on wall surface complete all as specified and directed.Note: The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 56 | M&L for Complete removal of existing treatment applying two coats of oil bound distemper over a coat of wall putty 2 to 3mm thick on plasterd surfaces preparatory to distempering on wall surface complete all as specified and directed.Note: The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 57 | M&L for preparation of old decorated plastered or unplastered surface including complete removal by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and finishing walls with Acrylic Smooth exterior paint of required shade as approved by GE with two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on walls over 3mm thick cement based wall care putty including necessary scaffolding, etc complete all as specified and directed.Note:- (a) Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engr-in -Charge.(b) The acrylic emulsion paint work shall be carried out by using smart painting tools and techniques as specified in Particular Specifications and Contractor will have to produce necessary documents for purchase of smart painting tools or rent receipt of these tools along with bill/RAR.The bidders are requested take this aspect in consideration before quoting their rate and no claim on account of misunderstanding or otherwise shall be admissible on this account. (c) The painting is to be done in one or more shades as approved by GE. |
| 58 | M&L for preparation of new plastered/unplastered surface and finishing walls with Acrylic Smooth exterior paint of required shade as approved by GE with two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on walls over 3mm thick cement based wall care putty including necessary scaffolding etc complete all as specified and directed.Note:- (a) Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engr-in -Charge.(b) The acrylic emulsion paint work shall be carried out by using smart painting tools and techniques as specified in Particular Specifications and Contractor will have to produce necessary documents for purchase of smart painting tools or rent receipt of these tools along with bill/RAR.The bidders are requested take this aspect in consideration before quoting their rate and no clain on account of misunderstanding or otherwise shall be admissible on this account. (c) The painting is to be done in one or more shades as approved by GE. |
| 59 | Preparation of old plastered surfaces of ceiling and applying two coat of white washing, complete all as specified and directed. |
| 60 | M&L for preparation of newly plastered surface of Ceilling and applying three coats of white wash surfaces complete all as specified and directed. |
| 61 | S&F Rotational moulded trippled layer polyethene water storage tank 1000 ltr capacity hoisted and fixed in position, including PVC float valve 20 mm bore including dismantling of existing tank complete all as specified and directed. |
| 62 | Taking down steel tubing and connection including cleaning for refixing or removal to store bore of pipe 20mm complete all as specified and directed. |
| 63 | S&F 20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 64 | All as per Srl item No 63 above but fixing only |
| 65 | Taking down steel tubing and connection including cleaning for refixing or removal to store bore of pipe 15mm complete all as specified and directed. |
| 66 | S&F 15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs including taking down complete all as specified and directed. |
| 67 | All as per Srl item No 66 above but fixing only |
| 68 | M&L for Cuttings chases for concealed water tubing of concealed conduit (cutting n.exc 10 cms girth) and making good in CM ( 1:3) in brick walls complete all as specified and directed. |
| 69 | S & F Brass chromium plated shower rose 125mm size with or without swivel joint, including fixing to steel pipe or union complete all as specified and directed. |
| 70 | S&F Cast copper alloy CP stop cock /angle Valve fancy type screwed both ends for iron pipe 15mm dia/ bore of pipe ( concealed type) complete all as specified and directed. |
| 71 | S&F Cast copper alloy CP bib tap fancy type screwed down , screwed for iron pipe 15mm dia/ bore of pipe complete all as specified and directed. |
| 72 | S&F Cast copper alloy CP stop cock /angle Valve fancy type screwed both ends for iron pipe 15mm dia/ bore of pipe complete all as specified and directed. |
| 73 | S&F Cast copper alloy CP stop cock /angle Valve fancy type screwed both ends for iron pipe 15mm dia/ bore of pipe complete all as specified and directed. |
| 74 | S&F in repair 15 mm bore Brass CP sink mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specifed and directed. |
| 75 | S&F Stop valves ,cast copper alloy ,screwed down high pressure , with crutch or butterfly handle , screwed both ends for iron pipe or for union 20mm dia complete all as specifed and directed. |
| 76 | S&F Gun-metal, globe or gate valves 20 mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specifed and directed. |
| 77 | S&F Towel rail 600mm long of CP fixed with including chromium plated brass screws and wooden/plastic cleats ( Minimum weight 190gm) complete all as specifed and directed. |
| 78 | S&F Vitreous China wash basin, angle back, size 400x400 mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets and including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specifed and directed. |
| 79 | S&F as in repair kitchen platerack made out of 0.63mm thick stainless steel sheet wall mounted type with 5/6 partition of size 60 cms x 90 cms x 25 cm fixed on wooden gutties complete all as specifed and directed. |
| 80 | S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specifed and directed. |
| 81 | S&F Looking mirror 600m x 450mm of selected quality 8 mm thick glass moulded edges fixed to plugs with chromium plated brass screws complete all as specifed and directed. |
| 82 | Dismantling cast-iron/PVC pipes including fittings taking out of trenches or walls as required dia of pipe upto 100mm complete all as specifed and directed. |
| 83 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 110mm bore complete all as specifed and directed. |
| 84 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor for 110mm bore complete all as specifed and directed. |
| 85 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 75mm bore complete all as specifed and directed. |
| 86 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor for 75mm bore complete all as specifed and directed. |
| 87 | S&F PVC (SWR) Bends any radius for 110mm bore complete all as specifed and directed. |
| 88 | S&F PVC (SWR) Bends any radius for 75mm bore with oval access door complete all as specifed and directed. |
| 89 | S&F PVC (SWR) Branch pieces single( Single Y) equal or unequal) for 110mm bore with oval access doors complete all as specifed and directed. |
| 90 | S&F PVC (SWR) Branch pieces single ( Single Y) equal or unequal for 75mm bore with oval access doors complete all as specifed and directed. |
| 91 | S&F PVC (SWR) vent cowl 75mm complete all as specifed and directed. |
| 92 | All as per Srl item No 91 above but size 110mm |
| 93 | S&F PVC (SWR) floor trap with grating including jointing to waste pipe in solvent for 75mm bore including CP grating cover with or without hole complete all as specifed and directed. |
| 94 | S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, bore of pipe 100mm including bolts and nuts and securing ends of stays towall or roof complete all as specifed and directed. |
| 95 | S&Fas in repair Vitreous china squatting pan \\"Orissa \\" pattern size 580x440mm white with integral foot rest all as fixed in repairs including ‘P’ or \\"S\\" trap including PVC low level cistern of 10 litres capacity including brackets jointing to flush pipe, PVC connection (450x15mm) flushing pipe complete fixed in repaircomplete all as specifed and directed. |
| 96 | Demolition of cement concrete (Reinforced) of any description and any position not other wise specifically provided reinforcement cut as required to facilitate demoltion complete all as specifed and directed. |
| 97 | M & L for RCC 1:2:4 type B-1 ( using 20mm graded crushed stone agg) as in chajjas shelves and similar items complete all as specifed and directed. |
| 98 | Demolition of brick work built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings dressed stone work and precast concrete articles complete all as specifed and directed. |
| 99 | M&L for Brick work with sub class “B” bricks straight or curved on plan exc 6M mean radius build in CM 1:6 using all as specified using old size bricks complete all as specifed and directed. |
| 100 | M & L for Form work to chajjas troughs and similar items including edges complete all as specifed and directed. |
| 101 | M & L for Form work to edges of concrete flats RCC/PCC band exc 5 cm but exc 10 cm complete all as specifed and directed. |
| 102 | M & L for Per- cast reinforced cement concrete M-15 (1:2:4 nominal mix ) type B-I, (Using 20mm grade stone agg) set in cement mortar 1:4 as in manhole cover all complete all as specifed and directed. |
| 103 | S&F TMT bars 10mm dia and over cut to lengths bent to shape required including cranking bending and spirally hoping for columns hooking ends and binding with MS wire annealed n.less then 0.90mm dia complete all as specifed and directed. |
| 104 | S&F TMT bars 6mm to 8mm dia cut to lengths bent to shape required including cranking bending and spirally hoping for columns hooking ends and binding with MS wire annealed n.less then 0.90mm dia complete all as specifed and directed. |
| 105 | Dismantling wrought iron or mild steel work of any description not other wise provided complete all as specifed and directed. |
| 106 | S&F Framed work rolled section as in framing compound girder staging for water tank staging, Cupboard frame,cooler frame any type as and the like built up from two or more beam or channel section or angles with plates stiffeners etc complete all as specifed and directed. |
| 107 | Demolition of cement concrete (unreinforced) of any description and any position not other wise specifically provided complete all as specifed and directed. |
| 108 | M/L for PCC (1:3:6) Type C2 using 20mm graded crushed stone agg as in surface channel & drain incl form work (Forming fair finished toi drain and surface channel complete all as specifed and directed. |
| 109 | Cutting into existing manhole for connecting new drains and making good to pipes and rendering cutting out existing benching for and forming branching for and forming branch channel (1/2 round or ¼ section ) in PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate smooth finished and reforming benching as specified and directed for 150mm dia of pipe complete all as specifed and directed. |
| 110 | S&F in repairs 150mm bore Reinforced concrete pipes ,class NP-3 laid and jointed complete all as specifed and directed. |
| 111 | Providing and laying of water proofing treatment to sunken portion including vertical portion by applying cement slurry make with acrylic based polymer modify cementeneuous composite compound and including demolition and filling of sunken floor with and including PCC 1:5:10 type E2 (Using 40mm brick aggregate) complete all as specifed and directed.(a) First layer of slurry of cement @ 0.488 Kg/sqm with acrylic based polymer modify cementeneuous composite compound @ 0.28Kg/sqm. This layer allowed to air cure for 4 hours(b) Second layer of cement slurry @ 0.242kg/sqm mixed with acrylic based polymer modify cementeneuous composite compound @ 0.125kg/sqm. This layer allowed to air cure for 4 hours(c) The slope shall be 1:20 towards the corner of outer wall and GI pipe of 50mm dia (medium grade) be inserted at corner projecting out side 20cm(d) 15mm thick plaster in CM 1:3 mixed with WPC to be provided while concrete on green (e) Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including bitumen primer @ 0.4Kg/Sqm, complete all as specified and directed. (f) APP modified membrane 3mm thick and weighing not less than 3 kg/sqm with 160 GSM/sqm, non woven polyester mat as center core reinforcement, laid with 75 mm side over lap and 100mm end over lap, the membrane has to be laid with LPG tourch and over lap sealed and finished neat over roof including a coat of bitumen 85/25 at the rate of 1.2 Kg per sqm over APP membrane, complete all as specified and directed. .(e) Joints of trap WC/Soil pipes shall be properly sealed with sealing compoundNote : (I) Concrete for sunken slabs shall be mixted with water proofing compound (WPC) as per manufactures instructions. Before carrying out water proofing treatment the sunken shall be tested with water for 48 hours for any leakage/dampness is seen in ceiling below. then treatment is again carried out to RCC slab and it is again tested before passing for next stage. (II) Only floor area shall be measured for payment purpose |
| 112 | Demolition of cement concrete (unreinforced) as in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specifed and directed. |
| 113 | M&L Providing, cement concrete 1:2:4 type B-0 (12.5mm graded crushed stone aggregate ) as in roof kerbs or mud stops, rounded or chamfered on edges or as in padding concrete complete all as specifed and directed. |
| 114 | M&L for 10 mm rendering in CM 1:4 including water proofing compound @2% of cement over roof surfaces finished even and smooth without using extra cement complete all as specifed and directed.Note:- WPC Mesured and Paid Separately. |
| 115 | M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including bitumen primer @ 3.5Kg/Sqm complete all as specifed and directed. |
| 116 | One layer of APP based polymeric membrane of approved manufacturer, 3mm thick, weight not less than 3.50 Kgs per Sqm , reinforced with non woven polyester fabric or weight not less than 150 gms per Sqm . Polymeric membrane shall be taken to a height 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing complete all as specifed and directed.(Note (i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions (ii) A Minimum overlap of 100 mm and 75 mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instructions. Note : S&F of APP based polimeric membrane of approved manufacturer will be laid/fixed by authorised person of the same manufacturers units as per relevent IS. |
| 117 | Applying two coat of aluminium paint on top of APP membrane complete all as specifed and directed. |
| 118 | M & L 75mm thick plain cement concrete type D-2, 1:4:8 (using 40 mm graded crushed stone aggregate) as in Sub base of flooring / hard standing etc complete all as specifed and directed. |
| 119 | M & L for sand filling 25mm thick under floors or in foundations including watering and consolidation complete all as specifed and directed. |
| 120 | M & L for machine pressed pre cast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and without pigment complete all as specifed and directed. |
| 121 | M&L PCC 1:2:4 Type B1 (using 20mm graded crushed stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like includingweathering, slightly rounded or chamfered angles and throating on top of chajjas complete all as specifed and directed. |
| 122 | M&L for writing letters or figures (Block. Roman. Italic or Indian) to building with synthetic enamel paint 65mm long and 10mm wide in words and figures such as (PN-10,TN-27,NP-14,T-123 & T-81/2 etc) over black synthetic enamel painted ground of 150mm dia incl obliterating old writting of any description n exc 0.10 sqm with paint to match existing work complete all as specified and directed. Note- considering PN-10/TN-27/T-123/T-81/2 No as unit. |
| 123 | Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custedy for taking credit complete all as speciified and directed. |
| 124 | Taking down ceiling fan/Exhaust fan/Geyser and deposited in MES Store complete all as speciified and directed. Please Enable Macros to View BoQ information |
| 125 | Taking down ceiling fan/Exhaust fan/Geyser and deposited in MES Store complete all as speciified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 25, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender