Tender For Certain B/R Repairs To Joinery, Ceiling, Leakage, Seepage At Vijay Baugh Of Age B/R-Ii Under Ge Haddo, Sri Vijaya Puram
Tender Value
40 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
18 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Certain B/R Repairs To Joinery, Ceiling, Leakage, Seepage At Vijay Baugh Of Age B/R-Ii Under Ge Haddo, Sri Vijaya Puram
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including CM bedding, removing rubbish off the premises complete all as specified and as directed. |
| 2 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons, riser of steps, skirting, dado etc laid in any mortar complete all as specified and as directed. |
| 3 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding complete all as specified and as directed. |
| 4 | M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 5 | M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified and as directed. |
| 6 | M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 7 | M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm,in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified and as directed. |
| 8 | M&L for glazed ceramic designer coloured tiles as in vertical surfaces of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing coat in CM (1:3) complete all as specified and as directed. |
| 9 | M&L 16 to 18mm thick granite stone (of any type ) work (table rubbed and polished) in floors, staircase tread & risers of steps, cooking platform, window cill/jambs etc laid bedded over 15mm thick CM (1:4) bedding & pointed in white/coloured cement to match coloured tiles including Rounding, grinding and mirror polishing complete all as specified and as directed. Note : Colour of granite shall be as approved by Engr-In-Charge) |
| 10 | Providing and welding MS iron strips to existing iron doors wherever required, including cutting, fitting, alignment, welding, grinding, edge smoothening, surface finishing, and making the repaired portion neat and even complete in all respects all as specified and as directed. |
| 11 | Dismantling of ceiling boarding including grid of any description fixed in any position with nails |
| 12 | S&F for anodoised aluminium powder coated snap grid frame work for ceiling 605mm x 605mm using aluminium anodoised sections specified in SSR part-I 1991 including cutting, drilling jointing ect complrtr including 4mm dia of GI hangers wire suspenders fixed with adjustable connectors and providing 6mm thick E-boards (Classic) 605mm x 605mm size all as specified and as directed. |
| 13 | Taking down chowkhats or frames with shutters without taking off shutters from frame exe 1.5 Sqm and n.exc 4 Sqm each all as specified and as directed. |
| 14 | Taking down chowkhats or frames with shutters without taking off shutters from frame n.exc 1.5 Sqm each all as specified and as directed. |
| 15 | Taking down shutters of any description exc 1.0 sqm but n.exc 2.0 sqm each all as specified and as directed. |
| 16 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Ditto but of Frame size 65x 100 mm complete all as specified and directed. |
| 17 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all asspecified and as directed. (Note: stainless steel butt hinges and necessary fittings shall be paid separately) |
| 18 | S&F IInd class hardwood plain solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints all as specified and as directed. |
| 19 | S&F flush shutter 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides including 6mm thick wooden lipping around the edges of shutter complete all as specified and directed. |
| 20 | S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening as per specification all as specified and as directed |
| 21 | S & F for Factory made solid PVC molded with particle board core door shutter 28 to 30 mm thick panel design with 2mm thick molded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing all as specified and as directed. |
| 22 | S&F auto hinges stainless steel grade AISI-316 (type Austenitic anticorrosive in nature) suitable for kitchen cabinets,CB , Shelves etc all as specified and as directed. |
| 23 | S&F contineous (Piano) hinges mild steel bright finish or electrogalvanised, width of flaps 40 mm complete all as specified and as directed. |
| 24 | S&F Auto concealed Cabinet Hinges, full overlay of size 103mm x 64mm etc all as specified and as directed. |
| 25 | S&F Fancy 'D' Type Drawer / Cabinet handles of Size 100mm, etc all as specified and as directed. |
| 26 | S&F Magnetic catcher with plate, glossy finish for Drawer / Cabinet of Size not less than 50mm, etc all as specified and as directed. |
| 27 | S&F 100 mm long stainless steel butt hinges For PVC Doors complete all as specified and as directed. |
| 28 | S&F 125 mm long stainless steel butt hinges,for WPC/Aluminium Doors complete all as specified and as directed. |
| 29 | S&F aluminium anodised barrel tower bolt all as above but 75mm long complete all as specified and as directed. |
| 30 | S&F extruded aluminium alloy handles fabricated types, anodised, each 75mm long all as specified and as directed. |
| 31 | S&F for 150mm long bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc For WPC Doors complete all as specified and as directed . |
| 32 | S&F for 300 mm long and 16 mm dia rod Matt finished stainless steel sliding doors bolts (ALDROP),with s.s nuts and screws etc. incl ISI Mark For WPC Doors Complete all as specified and as directed. |
| 33 | S&F for extruded aluminium alloy powder coated handles fabricated types, each 100mm long in aluminium doors etc., complete all as specified and as directed. |
| 34 | S&F Aluminum powder coated barrel tower bolt of extruded section 150mm long in aluminium doors complete all as specified and as directed |
| 35 | S&F Aluminum alloy powder coated sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy and as directed. |
| 36 | S&F for factory made single extruded 18/19 mm thick WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws etc., complete all as specified and as directed.NOTE:- All joint should be filled with sealant & Rates are Inclusive of dismantling of existing Cupboards. Complete all as specified and as directed . |
| 37 | M&L for HDF boards (fire & water proof) of 19mm thick as in CB, cabinet, shelves etc & the like with an including 02 coats of synthetic enamel spray painting glossy finish over a coat of primer incl preparation of surface complete including dismantling of HDF Boaring all as specified and as directed. |
| 38 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators, partitions and shutters with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285 fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete all as specified and as directed.Note: Materials like Glass,wiremesh etc shall be measured and paid as supply only seperately |
| 39 | Supply only plain sheet glass 4.0 mm thick ordinary quality and glazing with aluminum glazing clip in aluminum window shutter not exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 40 | S&F floor door stopper of aluminium alloy body & tongue, anodised with hard drawn spring of 140mm size fixed in floor complete all as specified and directed |
| 41 | Supply only Aluminium alloy wire mesh 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples all as specified and directed. |
| 42 | Supply and fix aluminium alloy wire mesh 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples all as specified and directed. |
| 43 | S&F Powder coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete all as specified and as directed. |
| 44 | Dismantling of cast iron/PVC pipe any dia and any shape incl bends/branch pieces jointed in cement mortar all as specified and as directed. |
| 45 | S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and as directed. |
| 46 | S&F for 110mm dia PVC (SWR) bends any radius complete all as specified and as directed. |
| 47 | S&F in repairs vitreous china ware wash hand basin white flat back of size 550x 400 mm with pedestal including brackets, 32 mm CP waste coupling, chain and plug, waste fittings, and all necessary inlet, out let connections complete all as specified and as directed. |
| 48 | S&F in repairs 15 mm bore pillar taps, cast copper alloy, chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts complete all as specified and as directed.(Make :Prayag Cat No. PIS-50H) |
| 49 | S&F in repairs for bib taps long body with flange cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed down for Iron pipe or for brass fancy for CP brass fancy type 15mm dia complete all as specified and as directed.(Make :Prayag Cat No. PIS-08H) |
| 50 | S&F in repairs two way bib cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup all as specified and as directed.(Make : Prayag Cart Part No PIS-12 H) |
| 51 | S&F in repairs angular stop cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup (Make :Prayag Cat No. PIS-10 H) |
| 52 | S&F in repairs vitreous china ware wash down white water closet pan (pedestal pattern with trap incl connecting to drain and flushing pipe, antisyphonage pipe incl PVC sheet cover etc complete all as specified and as directed. |
| 53 | S&F in repair PVC valveless syphonic action type flushing cistern 10 ltr capacity white with intel ball valve float flush pipe and handled including brackets complete all as specified. |
| 54 | S&F in repairs Brass chromium plated tubular towel rail 20mm dia & 60 cm long between flange complete all as specified and as directed. (Make Prayag Cat Part No. BA-70) |
| 55 | S&F in repairs Hand shower (health faucet) with 8mm dia & 1.0mtr long flexible tube with wall hook. (Make PrayagCat Part No. BEA-41) |
| 56 | S&F in repairs PVC connection 15 mm dia and 600 mm long with both and nuts complete all as specified and as directed. |
| 57 | S&F in repairs looking mirror 600 x 450 mm bevelled edge of selected quality glass, mounted on 6mm thk AC bldg board or commrcial ply wood & fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed.. |
| 58 | S&F in repairs 1mm thick Stainless steel sinks with drainage board in kitchen with waste coupling, plugs, washers and waste pipe fixed on granite platform, over all size 915 X460mm bowl size 410mm X 330mm X 160mm complete all as specified and as directed. |
| 59 | Labour for drilling holes with drill machine with electric driven for gas pipe etc not exc 25 mm dia Upto 10cm depth in marble stone etc complete all as specified and as directed. |
| 60 | S&F in repairs for plate rack of stainless steel using 0.65mm thick sheet, size not less than 900x750x250mm with steel sleevs & hanging arrengement for utensile, complete all as specified and directed. (Make : Prayag Cat No. P-348 or Equivalent approved) |
| 61 | S&F in repairs CP overhead shower dia 125 mm overhead shower round with revolving joints (with body rotation) & 225mm long arm shower with rabit cleaning system and all fittings complete all as specified and as directed.Make - Prayag BS-76 as approved. |
| 62 | Taking up or down 20mm dia steel tubing connection, including cleaning and removal to store complete all as specified and as directed. |
| 63 | Taking up or down 25mm dia steel tubing connection, including cleaning and removal to store complete all as specified and as directed. |
| 64 | S&F 20 mm dia bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. |
| 65 | S&F 25 mm dia bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified |
| 66 | S&F in repairs for providing 25mm dia Gun Metal, globe or gate valves with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed. |
| 67 | Cutting chases in PCC block walls for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed. |
| 68 | S&F rotational moulded Polyethylene [HDPE] Water Tanks, Triple Layered, ISI Marked Cylindrical & Vertical Type 1000 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including taking down old tanks complete all as specified and as directed. |
| 69 | S&F in repairs Ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe bore dia of 25mm (Minimum weight 455 gms) complete all as specified and as directed by Engineer- in - charge. |
| 70 | Dismantling plain or corrugated steel sheeting any gauge, thickness including similar pattern roof coverings. |
| 71 | S&F for pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an coloure having tensile strength of 550Mpa as in roof covering fixed with self tapping screws as complete all as specified and as directed. |
| 72 | S&F for pre painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an coloure having tensile strength of 550Mpa as in roof covering, ridge, eves gutters etc fixed with self tapping screws Rates are inclusive of Taking down eaves gutters andrainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)as specified. |
| 73 | Dismantling structural steel work complete all as specified. |
| 74 | M&L for rolled section as in main and cross beam, hip and jack rafter,purline where connected to common rafters and running rails and guides for sliding doors fixed witg angle cleats or other connecting plates of grade Fe-410 (grde E-165) complete all as specified and as directed. |
| 75 | M&L for aluminium wind tie of any size fixed with self tapping screws of size 50/75mm with integral EPDM washer in roof covering and including dismantling of old wind tile complete all as specified and as directed. |
| 76 | S & F stainless steel tubing of any diameter of circular, square or rectangular in shape of grade-304 (type Austenitic anticorrosive in nature) as in railings / grills / designer work including post top cap, bottom plate, cutting, bending, seamless welding and fixing in any type of location incl taking down old railing of any description complete all as specified and as directed. |
| 77 | Taking down cement plaster on brick /stone masonry / concrete surfaces of wall / ceiling incl raking out joints, hacking for key, scrubbing down with water etc and deposited the debris outside the MD land complete all as specified and as directed. |
| 78 | M&L for rendering 15mm thick in CM 1:4 including mixing water proofing compound on concrete/block masonry surfaces and finished even and smooth without using extra cement complete all as specified and as directed. |
| 79 | M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) all as specified. |
| 80 | M&L for preparation of newly plastered wall surfaces and applying two coat of oil bound distemper over one coat of primer including leveling the surface which undulation found with cement putty etc complete all as specified and directed. |
| 81 | M&L for preparation on newly plastered external wall surface and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint complete all as specified and as directed. (Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard). |
| 82 | M&L for complete removal of existing treatment of old decorated external wall surface by scrapping, washing, cleaning etc and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint incl filling cracks, holes using wall care putty complete all as specified and as directed. (Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard). Please Enable Macros to View BoQ information |
| 83 | M&L for complete removal of existing treatment of old decorated external wall surface by scrapping, washing, cleaning etc and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint incl filling cracks, holes using wall care putty complete all as specified and as directed. (Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender