Tender For Comprehensive Maintenance And Repair At Officer Md Accn At Shankar Vihar Under Ge (South) Delhi Cantt-10
Tender Value
1 Crore
Estimated cost
Bid Submission
27 Aug 2026
12 days left
EMD
1.75 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Comprehensive Maintenance And Repair At Officer Md Accn At Shankar Vihar Under Ge (South) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame with shutters (without taking of shutters from the frames) not exceeding 1.5 Sqm each complete all as specified and as directed. |
| 2 | Taking down chowkats or frames with shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed. |
| 3 | Taking down of shutter of any description exc 1 Sqm and n.exc. 2 Sqm each complete all as specified and as directed. |
| 4 | S & F Pressed steel frames of size 105mm x 60mm for doors/cupboard with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed. |
| 5 | S & F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed. |
| 6 | M & L for Cement concrete 1:2:4 type B0 using 12.50 mm graded stone aggregate as in back filling, holdfasts etc, complete all as specified and as directed. |
| 7 | S&F 35 mm thick Factory made 2nd class hardwood plain,framed paneled shutters(any numbe of panels) with lock rail and panel of 9mm BWP commercial ply with commercial veneering on both faces size of rail and stile as per IS-1003(part) Kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 8 | S&F 35 mm thick factory made 2nd class Hard wood glazed and Skelton shutters (any panels) open rebated and prepared to receive wiremesh/glass/gauge etc with all accessory as required and divided into squares edges of framing Plain, chamfered or rounded mitered and rebated sash bar any number with cut or mitered beads for securing glass/gauge etc Size of members of shutters complete all as specified and as directed. |
| 9 | S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube ,supplying and fixing in opending complete all as specified and as directed. |
| 10 | S&F, Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tube for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20 mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail , lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail , panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement , supplying and fixing in the frame at the site as per specification & drawing complete all as specified and as directed |
| 11 | S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65x 125 mm 2 or more rabates comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge.Note: For WPC solid door/windows frames,minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. |
| 12 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick with edge lipping tape allaround 0.8mm to 1.00mm thick, comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges shall be paid separately under relevant item). |
| 13 | Providing 30mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER with edge lipping tape allaround 0.8mm to 1.00mm thick, consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). The door should be water proof, termite proof,fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through Other hardwares shouldbe fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer's specification & drawings.” Note: Fixture/fittings shall be measured & paid under relevant item |
| 14 | S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and nontoxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge. Note: -For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e., depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. |
| 15 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of with edge lipping tape allaround 0.8mm to 1.00mm thick size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headedcounter sunk S.S screws, all as per direction of EngineerIn- Charge.(Note: stainless steel butt hinges shall be paid separately under relevant item). |
| 16 | Taking down & refixing in same opening of shutter of door , windows etc n exc 1.0 Sqm including easing and also refixing builder hardware as required including renewal of unserviceble screws , welding as required etc. complete all as specified and as directed. |
| 17 | Taking down of shutter of door , windows etc n exc 1.0 Sqm complete all as specified and as directed. |
| 18 | S&F fabricated aluminum window/ventilator with frames (Powder coated) including jointing cleats for fixing builder's hardware & provision for glasspanes/wire mesh including necessary fittings/fixture /aluminum snap beads etc,complete all as specified and as directed by Engr-in-Charge.Note:- (a) Glazing/Wire mesh shall be measured under respective item seperatly (b) Items shall be paid as per weight of aluminium sections (c) The rates quoted shall be inclusive of neoprene beading glazing clips, screws, etc as required whichshall not be measured for arriving the weight (d) The rate shall be inclusive of locking arrangement including fixing of aluminium hinges 100mm &Aluminium tower bolt 150mm in each shutter complete all as specified and as directed. |
| 19 | S&F 4 mm thick plain sheet / frosted glass ordinary quality n.exc 0.50 sqm each pane and fixed with oil putty or with wooden beading in square including hacking out old brockn glass / new fixing provision (any thickness, any size or at any height) complete all as specified and as directed. |
| 20 | Taking down aluminium windows shutters and refixing the same after re-setting of all aluminium sections including cleats, beadings, rollers and panels, if any required complete all as specified and as directed. |
| 21 | S&F in repair stainless steel telescope channel of size 300MM to 500mm complete all as specified and directed. |
| 22 | S&F in repairs dressing table for Ladies alongwith with Bevelled edge mirror of 5 to 6 mm thick selected quality glass, 1200 x 600 mm size, mounted on 6 mm thick AC building board or commercial plywood and fixed to steel plugs with Chromium plated brass screws and cup washers, including drawer and box/shelf of size 0.90 m long, 0.31 m wide and 0.39 m height consisting two shelf of equal size with 5 mm glass shutter and two drawers made of WPC board of 18/19 mm thick complete and including dismentaling of U/S existing dressing table complete all as specified and as directed. |
| 23 | S&F in repairs dressing table for Gents alongwith with Bevelled edge mirror of 5 to 6 mm thick selected quality glass, 1200 x 600 mm size, mounted on 6 mm thick AC building board or commercial plywood and fixed to steel plugs with Chromium plated brass screws and cup washers, including drawer and box/shelf of size 0.60 m long, 0.31 m wide and 0.31 m height consisting two shelf of equal size and two drawers made of WPC board of 18/19 mm thick completeand including dismentaling of U/S existing dressing table complete all as specified and as directed. |
| 24 | M&L for cleaning the sides rolling shutter shafts guide channel and greasing of moving parts of rolling and straightening rolling and replacement of bolts nuts etc as required for smooth functioning of shutters and taking out existing rolling shutters if required and refixing the same in original position complete all as specified and as directed. |
| 25 | S& F in repairs mild steel spring conforming to IS 62A-1970 of approved make in existing rolling shutters/opening of shutters exc 2.00 m and n.exc 3.5 m complete all as specified and as directed. |
| 26 | S&F in repair Steel rolling shutters, 1.25 mm thick with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated , complete: push pull or manual type complete all as specified and as directed. |
| 27 | S&F in repair SS curtain rod of 25 mm dia , with fixing brackets, side knobs etc ( 1 MM thick S S / any pattern) complete all as specified and as directed. |
| 28 | Dismantling boarding, any description, fixed in any position with nail or otherwise complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 29 | Dismantling boarding, any description, fixed in any position with nail or otherwise complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender