Tender For Special Repair To Bldg No Np-09 (Fafa Accn) Under Age B/R-I At Mil Stn Yol
Tender Value
47.50 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
10 days left
EMD
95000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No Np-09 (Fafa Accn) Under Age B/R-I At Mil Stn Yol
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 11-Aug-2026 | Corrigendum1 | BOQ | 03-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but n exc n.exc 4 Sqm each complete. |
| 3 | S&F for pressed steel frames size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including 25x3 Flat iron 230 mm long hold fast and fixing in PCC making good surface etc., complete all as specified |
| 4 | S&F for pressed steel frames size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including 25x3 Flat iron 230 mm long hold fast and fixing in PCC making good surface etc., complete all as specified |
| 5 | M&L for PCC 1:3:6, Type C0 (Using 12.5mm graded crushed stone aggregate) for filling in pressed steel frame of any size, complete all as specied and as directed |
| 6 | S&F for 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on one side and one face covered with decorative face veneer with lipping/ frame to match: supplied and fitted to chowkats, all as specified and directed. |
| 7 | S/F 35 mm thick 2nd class hard wood (Hollock Wood) glazed and skeleton shutter open rebated and prepared to receive glass gauze etc (without shas bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of shutter as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and as directed. |
| 8 | M&L WPC(Wood Polymer Composit) Double Prelam Door Frame(Chowkhat)solid frame of Size 120mm x 50mm with a wall thickness of 5mm(+/- 0.25), made out of extruded 5mm(=0.25) mm thick PVC Sheet of Density 600kg/cbm manufactured y an ISO 9001-2015 certified company and by joining 3 Nos heat moulded PVC Sections. The high section of size 35 x35 mm shall be maid from plain colour PVC sheet of 5mm(=/- 0.25 mm) thickness. The inside section will be covered with 5mm thick PVC sheet'C' shape covering section of size 120mm x 50mm. At centretop position 5mm(+0.25mm) thick 50 x50 x50 mm pattam section should be pasted with solvent cemen adhesive to make double pattam of frame. The frame shall be mitre cut at two corners & joined with 4 nos of 150mm long 'L' brackets of 19 x 19 mm M.S sq, Tube or fusion heat welding process. The two vertical door frames are to be reinforced with 25 x 25 mm M.S sq Tube of 19 gauge throughout the frame. The Door Frame shall be fixed to the wall using 8/100mm fischer screws. A minimum of 4 nos of screws to be provided for each vertical member & minimum 2 Nos. for horizontal member etc. complete as per manufacture's specification & direction of engineer-in charge. |
| 9 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of solid core single Leaf Flush Door of 25mm thickness, lipped with 15mm(5mm x 3) thick x 30 mm width on one stiles and top rails & 10mm (5mm x 2) thick x 30 mm width on the other stiles & bottom rails. The inner panel Laminated with 2mm thick termite proof, water proof & fire resistant moulded PVC sheet with 2,4,6 raised panel design in different plain &/or prelam colors on one side after routing the mouldd design on flush door & 2mm plain and/or prelam PVC sheet on other side using rubber based adhesive on flush door & solvent cement adhesive on the lipping etc. complete as per direction of Engineer-in-charge, manufacture's specification and drawing. |
| 10 | M&L for PCC 1:3:6, Type C1 (using 20mm graded crushed stone aggregate) nominal mix as in holdfast etc, complete all as specied and as directed |
| 11 | Steel window 1.25mm thick box type (Primer coated) ERW hollow P section of size 85mm x 35mm double rebated comprises gauged and glazed skelton shutter (double shutter) ERW Sec 50mm x 20mm and 1mm thick with two openable leaf consiting two Nos sash bar of T-Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 30mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC M-15, type B-0 (04 No's for each window, steel duly painted with one shop coat of zinc chromate primer on prepared surfaces) and finishing the surfaces to match with existing including following fitting welded to frame shutter:-(i) Hold fast, 150mm long of 12mm x 3mm made to shape -04 Nos per window.(ii) Handle of Z section 20mm x 25mm, 100mm long -1 No per leaf.(iii) MS tower bolt 150mm long - 2 No per leaf(iv) Z section 20mm x25mm, 100 long stopper - 1 No per leaf.(v) Cleat 65mm long of hollow square 15mm x 20mm x 63mm welded to hinge -1 No per leaf.(vi) Mild steel pintle hinge of size 75mm x 12mm - 2 Nos per leaf.(vii) Flat iron fillets of size 20X3 mm for fixing wire gauge.(viii) Fabrication & fixing arrangement as per drg No. CEPZ/ TD 06/07.Note:-(i) Above referred drawing has not been made part of tender. The same can be seen in the office of GE during working hours on any working day. |
| 12 | S&F for 3mm thick sheet glass, ordinary quality and glazing with oil putty/ wooden beads in square pane not exc 0.50 Sqm each pane in wooden/ Steel windows complete all as specified and directed. |
| 13 | S&F for 3mm thick figured glass, pin head type and glazing with oil putty/ wooden beads in square pane not exc 0.50 Sqm each pane in wooden/ Steel windows complete all as specified and directed. |
| 14 | S&F for Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with finned tacks of galvanised wire staple fixed with stainless steel wire staples, complete all as specified. |
| 15 | M&L for Applying two coats of synthetic enamel paint over a coat of pink primer on new wood or wood based surfaces of any description, exc. 10cm width or girth including preparation of surfaces, all as specified. |
| 16 | S&F for 100 mm size butt hinges medium weight , cold rolled MS and fixed complete all as specified and directed. |
| 17 | S&F for 150 mm size Handles extruded aluminium alloy handles,fabricated type anodised complete all as specified and directed. |
| 18 | S&F for 150mm size aluminium anodised, barrel tower bolts, of extruded section and fixed complete all as specified and directed. |
| 19 | S&F for Aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 250 mm long, all as specified and directed. |
| 20 | S&F for Mild steel, 300mm, ordinary rat tail, rod pattern springs including roller and roller plate complete fixed to chowkhats, all as specified. |
| 21 | S&F for Steel locking bolts with mild steel electro galvanised plate and bright bolt not less than 10mm dia 100mm size all as specified. |
| 22 | S&F 2nd class hardwood Plain, solid, straight, cupboard chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 23 | S&F 18/19mm thick Prelaminated particle board, interior grade, prelaminated both side decorative choice lamination, fixed with screws to timber frame work and wall complete all as specified and directed. |
| 24 | S&F for Extra over rates of block board or veneered particle board for 18/19 thick external teak wood lipping, 6mm thick fixed with nails complete all as specified and directed. |
| 25 | S&F for Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flap (when open) 40mm, complete all as specified. |
| 26 | S&F 100 mm size Extruded aluminium alloy handles, fabricated type, anodised, decorative type, fixed to shutter complete complete all as specified and directed. |
| 27 | S&F for Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 28 | Dismantling timber scantlings 40 sq. cm and over in section, in any position unframed work complete all as specified. |
| 29 | Dismantling boarding, any description, fixed in any position with nails, all as specified. |
| 30 | False ceiling of Non asbestos 4 mm fibre designer cement building boards, manufactured from homogeneous mixture of cement, quartz and cellulose and cured with high pressure steam using auto claving process confirming to IS-14862, of size 600 mm x 600 mm x 4 mm thick fixed over and including anodised aluminium powder coated (minimum thickness of powder coating 50 micron) snap grid frame work of T section (main & cross member) of size 25 mm x 25 mm x 1.5 mm thick in square pattern of grid size 600mm X 600mm. The aluminium fram work will supported on side wall with the used of aluminium 'L' section of size 25 mm x 25 mm x 1.5 angles etc. Snap grid shall be supported with hangers of 4 mm dia Galvanised iron wire adjusting level fixed to roof slabs / truss etc by means of ceiling cleats made out of Galvanised iron flat of size 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified directed by the Engineer-in-Charge. |
| 31 | Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing), removing and rubbish of the premisses, complete including removal of debris to a distance exc 1.5 Km but n exc 2 Km, complete all as specified. |
| 32 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete including removal of debris to a distance exc 1.5 km but n.exc 2 Km, all as specified and as directed. |
| 33 | Non-skid Mat finish coloured/ printed ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement pointed in white or coloured cement to match complete all as specified and directed. |
| 34 | Non skid Mat finish coloured/ printed ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc. set and jointed in neat cement slurry and including 15mm thick bedding layer in cement mortar 1:6 (01 cement : 6 coarse sand) including necessary cutting and waste as per site requirement pointed in white or coloured cement to match complete all as specified and directed. |
| 35 | Non skid Mat finish, premium quality, coloured/ printed ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting, dado etc . set and jointed in neat cement slurry and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed. including necessary cutting and waste as per site requirement pointed in white or coloured cement to match complete all as specified and directed. |
| 36 | M&L for Glazed ceramic, premium quality, coloured/ printed tiles 350mm x 250mm/ 450mm x 350mm/ 300 x 450 x 7 to 8 mm thick on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed. |
| 37 | Demolition of stone slabs/tiles of any description or thickness, laid bedded and pointed in any mortar in floors, aprons etc. including removal of debris to a distance exc 1.5 km but n.exc 2 Km, all as specified and as directed. |
| 38 | M&L for Machine cut kota stone slab flooring 18-20 mm thick of size not less than 550 mm X 550 mm as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, as in floor etc, laid over and including 15mm screed layer in cement mortar 1:6 (1 cement : 6 coarse sand), cutting, rubbing, grinding and polishing to achieve mirror finish, laid over PCC subbase complete, all as specified. |
| 39 | M&L for 25mm thick cement concrete M-15 (Nominal mix) type B-0 (using 12.5mm graded crushed stone aggregate) as in flooring, finished even & rough to receive floor finishes or chamfering of RCC Chajjas to drain off storm water with proper slope complete all as specified and directed. |
| 40 | M&L for Plain cement concrete M-10, nominal mix, type C-2, using 20mm graded mechanically crushed stone aggregate, 50mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified. Note:- The unit rate include for use of form work (straight or curved). |
| 41 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for sunken portion including removal of debris to a distance exc 1.5 Km but n exc. 2 Km, complete all as specified. |
| 42 | Plain cement concrete 1:5:10 type E-2 (using 40 mm graded crushed stone aggregate) as in sunken floors, complete all as specified. |
| 43 | Water proofing treatment of sunken portion and roof treatment using shaliurethane-BTD of STP make or equivalent mentioned in Appendix 'E', high solid content component water based liquid applied elastometric water proofing membrane as ASTMC 836 and ASTMD 6083, thickness of the membrane shall be 1.50 mm having solid content of more than 80 % elongation of 500 + (-) 50 % laid over reinforcing layer on non woven geotextile mesh of 40/50 gms including applying self primer coat by diluting with 1:1 ratio @ 0.20 Kg per square metre and preparation of surface complete all as directed. |
| 44 | Screed bed or bedding layer of cement mortar 1:4, 10mm thick for laying floor finishes as in sunken portion surface, surface finished even and smooth without using extra cement, using water proofing compound as per manufacturers instructions, complete all as specified.Note:- WPC shall be measured and paid separately as supply only |
| 45 | 25mm thick PCC 1:2:4, type B-1 (Using 20 mm graded crushed stone aggregate) for sunken portion complete all as specified and directed. |
| 46 | S&F for 32 mm dia, 450 mm long, galvanised iron, medium grade pipe as in spout of sunken floor all as specified and directed. |
| 47 | M&L for Hardcore of Broken stone or boulders gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed |
| 48 | M&L 75mm PCC, M-10 (Nominal Mix) type C-2 (using 40mm graded crushed stone aggregates) as in sub base flooring finished even and fair without using extra cement, complete all as specified and directed . |
| 49 | Providing and laying 60mm thick factory made chamfered edge cement concrete paverblock of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method usingPU mould, laid in required colour & patternover and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified & directed. |
| 50 | Chequered cement concrete tiles of size 20cm x 20cm x 25mm thick with grey pigment cement and pigments, set jointed & pointed in neat cement slurry mixed with pigment to match the shade of the slab in floors laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified & directed. |
| 51 | Demolition of cement concrete reinforced of any description in any position complete including removal of debris to a distance exc 1.5 km but n.exc 2 Km, all as specified and as directed. |
| 52 | M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified. |
| 53 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. fair finished flat surface complete all as specified & directed. |
| 54 | M&L for reinforced cement concrete type B1, 1:2:4 (20 mm graded aggregate) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like |
| 55 | M& L 20 mm thick Granite work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking or WHB platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including 15mm thick bedding layer in cement mortar 1:6 (01 cement : 6 coarse sand) including necessary cutting and waste as per site requirement pointed in white or coloured cement to match complete all as specified and directed. Note: The size,shade and design will be approved by GE. |
| 56 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified & directed. |
| 57 | S&F for Pre- painted galvalume aluminum zinc (AZ-150) coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 58 | S&F for Pre-painted galvalume aluminum zinc (AZ-150) coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as inbroof covering/cladding to wall, fixed with self tapping screws as specified |
| 59 | Dismantling PVC drain pipes, 75 to 110 mm dia, fixed to walls, laid in floors or in trenches or in any position including all fittings all as specified and directed. |
| 60 | S& F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm dia outlet pipe in cement concrete type B-1 (1:2:4) , all as specified and directed. |
| 61 | S&F for PVC (SWR) pipes single socketed, type B, in any length with rubber ring joints laid in trenches or in floors of bore 110 mm, in repairs complete, all as specified. |
| 62 | S&F for PVC (SWR) pipes single socketed, type B, in any length with rubber ring joints laid in trenches or floors of bore 75 mm, laid in repairs complete, all as specified. |
| 63 | S&F PVC (SWR) pipes single socketed, type B, in any length with rubber ring joints fixed to walls of bore 110 mm, in repairs complete, all as specified. |
| 64 | S&F PVC (SWR) pipes single socketed, type B, in any length with rubber ring joints fixed to walls of bore 75 mm, in repairs complete, all as specified. |
| 65 | S&F for PVC (SWR) junction single, (Single T) equal or unequal, 75mm bore provided with oval access door, fixed in repairs all as specified. |
| 66 | S&F for PVC (SWR) junction single, (Single T) equal or unequal, 110mm bore, fixed in repairs all as specified. |
| 67 | S&F for PVC (SWR) bend any radius, 110mm bore, fixed in repairs complete all as specified. |
| 68 | S&F for PVC (SWR) bend any radius with or without access door, 75mm bore, fixed in repairs complete all as specified. |
| 69 | S&F for 110 mm PVC (SWR) vent cowl complete, all as specified. |
| 70 | S&F for Rotational moulded polyethylene water storage tank 500 Ltrs capacity four layered (ISI Marked) cylinderical vertical with closed top, hoisted and fixed in position with ball brass valve, high pressure with Brass PVC float valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line including taking down of old tank, all as specified. |
| 71 | S& F in Repair Sink with drain board made of stainless steel 1.00 mm thick in kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 405mm x 355mm x 178 mm, all as specified. |
| 72 | S&F for Soap dish, chromium plated, fixed to plugs with chromium plated, brass screws, fixed in repairs all as specified. |
| 73 | S&F for Sheet glass shelf assembly, 55cm long consisting of 5.5 mm thick sheet glass shelf 12cms wide with chromium plated bracket guard (rectangular/ oval/ curved and railing 60cm long, selected quality as approved by GE, fixed in repairs, all as specified and directed. |
| 74 | S&F for Chromium plated brass shower rose, fancy type, 125mm size with shower arm, chromium plated, 195mm long with bend of 45° with flange suitable for 15mm bore pipe with swivel joint fixed to pipe in repairs, complete all as specified. |
| 75 | S&F for angle valve/stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, screwed both ends for 15mm bore iron pipe or for unions and fixed in repairs complete, all as specified. |
| 76 | S&F for Stop valves, cast copper alloy, chromium plated fancy type with long shank and cup(Concealed Type), screwed down, high pressure, screwed both ends for 15mm bore iron pipe or for unions and fixed in repairs complete, all as specified. |
| 77 | S&F for Bib taps, 15mm bore, cast copper alloy, chromium plated, fancy type with, screwed down high pressure, screwed for iron pipe or for brass ferrule fixed in repairs, all as specified. |
| 78 | Supply only PVC valve less, crystal white, syphonic action type flushing cistern 10 litre capacity, superior quality, plunger type, low level, with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe 90cm long and 15 mm dia 600 mm long PVC connection with CP brass coupling nuts and PVC washers at both ends fixed, in repairs, all as specified. |
| 79 | S&F for Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, snow white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-I using 20 mm graded crushed stone aggregate complete all as specified, incl making connections to trap and to flush pipe, etc and making good to floors to match existing, in repairs, all as specified. |
| 80 | S&F Vitreous china water closet pan (pedestal pattern), white including fixing bolts etc including fixing of plastic water closet seat cover, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device with CP Jet Spray etc. complete all as specified.(Note: All fittings required for operation are covered in this item). |
| 81 | S&F for Brass chromium plated tubular towel rail 20 mm dia, \\"D\\" type, 60 cms long between flanges fixed with and including chromium plated brass brackets, brass screws complete all as specified |
| 82 | S&F for Wash hand basins, Vitreous China (white coloured) size 550mmx400mm, excluding tap etc including brackets with 32 mm bore waste fittings, brass, chromium plated with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, PVC connections 15mm size with CP brass coupling nuts of length 450mm, trap, grating and Union for discharge pipe, waste, chain and plug and porcelain stopper, chain and plug, PVC 32mm dia flush pipe and all accessories fixed in repair complete as all specified and directed. |
| 83 | S&F for 600mmx450mm bevelled edge looking mirror of selected quality with 4.5mm thick polished glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with CP brass screws and cup washers fixed in repairs, all as specified. |
| 84 | M&L Sink mixer (wall mounted) with 165 mm (6.5\\") long swivel spout, connecting legs and wall flanges screwed down for iron pipe and fixed complete all as specified and directed. |
| 85 | M&L CP Central hole basin mixer with 450 mm braided connection pipe (without pop-up) screwed down for iron pipe and fixed complete all as specified and directed. |
| 86 | M&L Brass CP wall mixer for mixing hot & cold water in Bath screwed down for iron pipe and fixed complete all as specified and directed. |
| 87 | S&F in repair Polyethylene and unplasticised PVC pipe 32 mm bore low density polyethylene (LPDE) pipes of pressure rating 6 kgf/sq. cm, complete all as specified. |
| 88 | Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc. complete including removal of debris to a distance exc 1.5 Km but n exc 2 Km, Complete all as specified. |
| 89 | M&L for 15mm thick rendering on fair faces to brick work surface in CM 1:6 finished the surface even and smooth without using extra cement on internal wall surface, complete all as specified. |
| 90 | M&L for 15mm thick rendering on other than fair faces to brick work or stone masonry surface in CM 1:4 finished the surface even and smooth without using extra cement on external wall surface with water proofing compound, complete all as specified. |
| 91 | Material and Labour for taking down old cement plaster of walls and perform waterproofing of exterior walls, including raking out joints,loose particles complete and applying two coats of acrylic polymer modified high performance coating (ASIAN- Smartcare Ultra Block 2k/BERGER- Home Shield 2k) or equivalent approved make. The treatment shall be done from ground level and upto suitable height as directed and provision of 15mm thick cement plaster in CM 1:4 well finished even and smooth complete all as sepcified and directed. |
| 92 | M&L for 10mm thick rendering in cement mortar 1:3 on ceiling surfaces, finished surface evan and smooth without using etra cement complete all as specified & directed. |
| 93 | M&L for Preparation of new plastered or unplastered surfaces of walls with wall care putty, 2 mm thickness over plastered surface to prepare the surface even and smooth and applying two coats of oil bound distemper complete all as specified and directed. |
| 94 | Preparation of new plastered surfaces of walls and applying finishing walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and directed. |
| 95 | M&L for Preparation of new plastered or unplastered surfaces with wall care putty 1mm thickness over plastered surface to prepare the surface even and smooth and applying two coats of oil bound distemper on ceiling complete all as specified and directed. |
| 96 | Taking down cement plaster/decayed concrete from RCC roof projections/upward parapet walls/down facia/soffits and fins of RCC chajjas/beams/columns/balconies etc. and also applying one coat of anti corrision paint to visible reinforcement if any. Supply and fixing by means of nailing wire netting of galvanised wire 1.40mm dia and mesh size 20mm and brushing neat cement slury with 3.00 Kg of cement/sqm and M&L for 20mm thick rendering in two layers using shot gun or pressure nozzle or manually well bonded with surface (top/final layer shall be rendered after final setting of under layer) in CM 1:3 on concrete surfaces including scaffolding at a height upto 7.00 mtrs etc complete all as specified and directed. |
| 97 | Taking up or down old 15 mm bore steel tubing fixed to wall and ceiling or laid in floor,with all fittings and fixtures and short lengths including cleaning for refixing, removal to store,complete all as specified . |
| 98 | Taking up or down old 20mm bore steel tubing fixed to wall and ceiling or laid in floor,with all fittings and fixtures and short lengths including cleaning for refixing or removal to store,complete all as specified . |
| 99 | Taking up or down old 25 to 32 mm bore steel tubing fixed to wall and ceiling or laid in floor,with all fittings and fixtures and short lengths including cleaning for refixing or removal to store,complete all as specified . |
| 100 | Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 101 | Fixing only G I tubing medium grade of 15mm bore with all new fittings fixed to wall and ceiling or laid in floor/trenches complete all as specified and directed |
| 102 | Fixing only G I tubing medium grade of 20mm bore with all new fittings fixed to wall and ceiling or laid in floor/trenches complete all as specified and directed |
| 103 | Fixing only G I tubing medium grade of 25/32mm bore with all new fittings fixed to wall and ceiling or laid in floor/trenches complete all as specified and directed |
| 104 | G I tubing medium grade of 32mm bore with all fittings fixed as over flow pipe complete all as specified and directed |
| 105 | S&F 20 mm Female Brass Threaded Adaptor (FTA/ FBTA) for CPVC pipes SDR 11 & Plain CPVC SDR 11 complete all as specified. |
| 106 | Supply only integral water proofing compound |
| 107 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshade, shelves, lintles etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exceeding 10 cms girth complete all as specified and directed. |
| 108 | M&L for plain cement concrete 1:2:4, type B1 (using 20mm graded crushed stone aggragate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and holdfast and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs n, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including use of form work complete all as specified and directed. |
| 109 | Demolition of stone/boulders or brick masonary built in cement mortor including all quoins, arches, pillars, etc but excluding ashlar facings, dresses stone work and precast concrete articles etc, complete all as specified. |
| 110 | Walling random rubble masonry with best quality locally available stone, brought upto course, well bonded, bedded, solidly hearted and built in cement mortar 1:4, complete all as specified and directed. |
| 111 | All as per Item No. 110 but except stone |
| 112 | M&L for Brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed. |
| 113 | M&L for Brickwork with old size flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1: 4 complete all as specified and directed. |
| 114 | M & L for Curtain rods of mild steel, chromium plated with fixing brackets, stops, etc. complete all as specified and directed. |
| 115 | Preparation of new steel surfaces and applying two coats of synthetic enamel paint, over a coat of red oxide complete all as specified. |
| 116 | S&F for Steel plate rack made of stainless steel having thickness 1.00mm, fixed with plugs, washers and steel screws including bedding in cement mortar on to dwarf wall, overall size 600mm x 750mm, all as specified and directed. |
| 117 | Preparation of old steel surfaces or iron surfaces of any description including railing and applying one coat of synthetic enamel paint complete all as specified. |
| 118 | M&L 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified. |
| 119 | Taking down point wiring with aluminium/ copper conductor for light point, fan & socket point/ power point etc. complete including switches, sockets, holders, (batten or pendent type), ceiling rose, switch board, bell/buzzer, bell push, and making good to the disturbed surfaces of wall/ floor etc. to match with existing surfaces including white wash/ colour wash/ distempering to match with existing wall/ floor/ ceiling finishes, complete all as specified and directed. |
| 120 | Taking down sheet metal enclosure DB, MCB, main switch etc and making good distrubed surfaces to match with existing surfaces, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 121 | Taking down sheet metal enclosure DB, MCB, main switch etc and making good distrubed surfaces to match with existing surfaces, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 03, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 10 daysSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender