Tender For Special Repair To Bldg No 12 S And T (Or Md Accn) Of 205 Sata Bty At Kk Area Nainital Under Ge Ranikhet
Tender Value
24.31 Lakhs
Estimated cost
Bid Submission
20 Aug 2026
19 days left
EMD
48650
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ranikhet → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No 12 S And T (Or Md Accn) Of 205 Sata Bty At Kk Area Nainital Under Ge Ranikhet
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting, any gauge, thickness as in roof coverings. |
| 2 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 3 | Dismantling of timber scantling 40 Sqcm and over in section in any position as in framed work complete all as specified and directed. |
| 4 | M&L for 25mm 2nd class hardwood Boarding, supplied & fixed with nails in any situation (except flooring and skirting) |
| 5 | Fixing only second class hardwood boarding of any thickness complete all as specified and directed . ( Note :- Old boarding shall be obtaind from item No - 02 above) |
| 6 | M&L for second class hardwood (wrought) in scantling for woodn truss and boarding complete as specified and directed |
| 7 | Fixing only second class hardwood (wrought) in scantling for woodn truss and boarding complete as specified and directed ( Note :- Timber shall be obtaind from item No -03 above) |
| 8 | S&F prepainted aluminium zinc steel sheet (galvalume base) or thinknee 0.50mm having tensile strength of 550 MPA , in colour and profile as apporved by GE and to be facotry moulded as in roof covering /cladding and fixed with hot dipped galvanished with high durable protective triple coated self tapping screws /self drilling serews, to suit the roofing in customized colour matching with the colour of roofing and screws are to be fixed using torque adjustable electronic gun screws drills of suitable capacity complete all as specified |
| 9 | S&F Pre-painted galvatume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to waall , fixed self tapping screws complete all as specified and directed. |
| 10 | Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level). |
| 11 | Dismantling floor, hearth , wall tiling including taking down plastering in cement mortor removing serviceable tiles to store and rubbish off the premises |
| 12 | M&L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. |
| 13 | M&L Virified tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and hite or coloured cement to match in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match as in floor etc , all as specified. |
| 14 | -ditto- all as per item ser No …. above here-in-before but in skirting/dado or verticle surfaces with back coat of screed bed or bedding layer of 10 mm thick 1:4 and pointed in white or coloured cement to match complete all as specified. |
| 15 | M&L Joint free Non - skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified. |
| 16 | M&L Glazed coloured ceramic tiles in verticle surfaces 450 x 350 x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match with backcoat of screed bed or bedding layer 10mm thick 1:4 and pointed in white or coloured cement to match complete all as specified.. |
| 17 | Demolition of brick work built in cement mortar all as specified |
| 18 | Material & Labour for brick work with sub class `B’ bricks, straight on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 19 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete. |
| 20 | M&L for RCC 1:2:4 type B-1, Slab supported on walls,beams and columns in floors,roof, landing, balconies,in type B1(20mm graded aggregate). |
| 21 | Formwork to soffits of suspended slabs such as roof slab, floor slabs landings and sgh finished surfaces of concrete flat. |
| 22 | M & L for mild steel TMT bars ,10mm dia and over , cut to length , bent to shspe required incl cranking , bending spirally for hooping for coloumns , hooking ends andbionding with (annealed) not less than 0.90 mm dia all a specified and directed |
| 23 | M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete over cement screed bed 15mm thick 1:4, complete all as specified and directed by Engineer in charge. |
| 24 | S&F 18/19 mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work |
| 25 | S & F 30mm wide Continuous (piano) hinges, mild steel, bright finish or elec trogalvanised |
| 26 | S&F 100mm Hasp and staple, safety type, Aluminium anodised, including bolt to hinge plate and fixed with screws complete all as specified |
| 27 | S&F Push to open Magnetic Catches for kitchen cabinet doors complete all as specified Make Hettich or equivalent as approved by Engr-in-charge |
| 28 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) any thickness, including cover fillets but without frame work. |
| 29 | Supply & fixing of powder coated GI snap grid frame work for false ceiling comprising of the following sections for making partitions of 605x605 mm size fixed to walls with rawl plugs & screws and hanged to roof with and including 2mm dia GI wire suspender of suitable length and butterfly clips, size of main tee shall be 37mmx24mmx0.3 mm thick , cross tee shall be 28mmx24mmx0.3mm thick and wall angle shall be 24mmx24mmx0.3 mm thick complete all as specified and directed. |
| 30 | Supply & fixing 4mm thick non asbestos E-board classic cememt building board for insulation and accoustic purpose, 600 x 600 mm size fixed with staples on snap grid as in ceiling complete all as specified and directed. |
| 31 | Taking down chowkats or frames exc 1.50 sqm but n.exc 4.00sqm each with shutters (without taking off shutters from the frames) complete.. |
| 32 | Supply and Fixed Pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges ,lock stike plate etc, size 125 X 60 mm complete as specified. |
| 33 | Supply and Fixed Pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges ,lock stike plate etc, size 105 X 60 mm complete as specified. |
| 34 | M&L providing cement concrete (1:3:6) type C1 for filling in pressed steel frames and other similar items etc complete. |
| 35 | S&F 30mm thick Flush shutters with/without peepholes, solid core construction, with block board core and plywood face panels, commercial type on both sides, both face are covered with decorative face veneer with lipping/frame to match and |
| 36 | S&F 35mm thick second class hard wood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engineer-in-Charge. Glass or wire cloth, etc. in panels or sash squares shall be measured separately |
| 37 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin VC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 38 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 39 | S & F 200 mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed |
| 40 | S & F 250 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 boltsand nuts, four on bolt plate and two on staple plate and fixed |
| 41 | S&F 150 mm long Mild steel pressed handles, oval type, stove enamelled black. |
| 42 | S&F in repair 140 mm floor door stopper of aluminium alloy body and tonuge ,anodised, with hard drawn steel spring fixed in floor. |
| 43 | Supply & fixing butt hinges medium weight cold rolled mild steel of 100mm long complete all as specified and directed. |
| 44 | S&F 300 mm ordinary rat rail rod pattern springs,including rollerand roller plate mild steel fixed with screwes wooden frame and welded to iron frame. |
| 45 | S&F in repair 20mm dia Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed. |
| 46 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and as directed |
| 47 | Taking down chowkats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete. |
| 48 | S&F three track aluminium powder coated sliding window with three sliding shutter, the size of outer frame three track 100 x 37 x 1.50mm (using two track for glazed window shutter and one track for wire gauged), the section shutter size 37 x 18 x 1.2mm) and glazing with 5 mm thick transparency glass of poly carbone including all around suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed on aluminium flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers sliding rollers of nylon with including all necessary fittings complete all as specified and directed. |
| 49 | Taking up or down GI Water Tubing 15mm dia (bore) including Connections and Fittings, segregating serviceable Pipes & Fittings and Stacking properly at Site(s) for re-use, complete all as specified and as directed. |
| 50 | -ditto- all as per Item No. 21 here–in–before, but for 20mm dia (Bore). |
| 51 | -ditto- all as per Item No. 21 here–in–before, but for 25mm dia (Bore). |
| 52 | Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed. |
| 53 | -ditto- all as per Item No. 24 here–in–before, but for 20mm dia (Bore). |
| 54 | -ditto- all as per Item No. 24 here–in–before, but for 25mm dia (Bore). |
| 55 | S&F in repair 15mm dia bib taps CP Brass with Capstanhead, screwed down, screwed for iron pipe of bore 15mm complete. |
| 56 | S&F in repair Brass CP Wall/Basin/Kitchen sink mixer for mixing hot & cold water (3 in 1) screwed down for iron pipe and fixed bore of pipe 15mm complete all as specified . |
| 57 | S&F in repair Angle Cock,15mm fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 58 | S&F in repair Brass chromium plated shower rose 125mm size with shower arm, including fixing to steel pipe or union complete all as specified and directed. |
| 59 | Supply& Fixing Soap Dish CP Brass complete all as specified & directed.Make : Prayag or equivalent as approved by Engr-in-Charge |
| 60 | S&F in repair toilet paper holder with flat recessed type stainless steel complete all as specified and as directed |
| 61 | Supply & Fixing Corner Glass Shelf 300mm (with ABS Brackets) 300 x 600mm complete all as specified & directed. |
| 62 | Supply& Fixing in repair tubular towel Rail CP Brass, chromium plated D type with CP Brackets, 600 mm long between flanges all as specified. |
| 63 | S& F in repair 600x 450mm beveled edge mirror or selected quality glass mounted on 6mm thick AC bldg board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers. |
| 64 | S&F in repairone piece floor mounted vitreous china EWC with integrated flushing cistern, soft closing seat cover including 'P' / 'S' trap and necessary nut/bolt for fixing complete all as specified and as directed by Engr-in-Charge |
| 65 | Supply & fix in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified as approved by the GE. Make- Jaquar or equivalent |
| 66 | S&F in repair vanity cabinet with wash basin Owing to the high quality HDHMR Board with a gloss finish table top of size 600mm x 450mm x 150mm,any shape and colour including PVC waste pipe 32mm dia, single lever basin mixture ,waste coupling brass chromium plated complete all as specified and directed. |
| 67 | S & F in repair Stainless Steel grating 100mm dia complete all as specified. |
| 68 | S&F in repair PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed. |
| 69 | S&F in repair PVC Connections 600mm long complete all as specified. |
| 70 | S & F in repairs for PVC (SWR) floor/Nahani trap 75 mm dia outlet, plain with grating including jointing with solvent cement to waste pipe, fixed in cement concrete type B-1 (1:2:4) |
| 71 | S & F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 72 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar workconforming to Fe.290.Gde-E-165 |
| 73 | M & L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red odixe primer complete all as specified |
| 74 | Taking down cement plaster on brick or stone walls etc raking out joints hacking for key scrabbing down water etc including taking out/removal of the all the tree routes from the brick surface/concrete surface complete all as directed. Note : Rate should be deemed included in the said items in the item rate. |
| 75 | Material and labour for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces using WPC where ever required as per manufacturerer's instructions and finishing the surface even and smooth (without using extra cement) etc. incl finishing even and fair complete all as specified NOTE -WPC shall be measured and paid separetely. |
| 76 | M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and fair without using extra cement complete. |
| 77 | Supply only WPC complete all as specified and directed. |
| 78 | M&L for applying two coats of synthetic eneamel painting over a coat of pink primer on new wooden surfaces exc 10 cm width or girth including preparation of surfaces complete. |
| 79 | M&L for Preparing newly plastered surfaces and applying two coat of oil bound distemper over a coat of primer to wall to complete all as specified and as directed, |
| 80 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over any surfaces. Makes :- Nerolac -Excel, Asian - Apex, Berger - Weather coat antidust, Dulux - Weather shield. |
| 81 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) |
| 82 | S&F Mild steel sheet eaves gutters thickness of sheet 1 mm and dia 100mm, galvanised class 3, half round with rounded edge including brackets, heads, shoes etc complete all as specified and directed by Engineer-in-Charge. |
| 83 | S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge. |
| 84 | S&F 110mm PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-Charge. |
| 85 | M&L for 75mm Cement concrete Type C-2 1:3:6 (40mm graded aggregate) for plinth protection complete all as specified and directed by Engineer -in-Charge. |
| 86 | Dismantling water tanks of capacity exc 250 but n.exc 500ltrs complete. |
| 87 | Supply & Fixing rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion 500 ltrs capacity with and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed. |
| 88 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 89 | M&L for PCC 1:3:6 type C-2 (40 mm graded aggregate) as in surface channels and drains including form work. |
| 90 | Extra for forming fair finished drain or channel 50 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed. |
| 91 | Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth for foundation or manholes etc., and area n.exc. 10 Sq.m on plan and getting out in any type of soil (Hard/soft). |
| 92 | Demolition and breaking up drain pipes (SGSW, AC or RCC) of internal dia 150mm, set in cement mortar complete. |
| 93 | M&L for cement concete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes of 160mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed. |
| 94 | Material and labour unplasticised PVC pipe 160mm dia type 'B' with wall thickness 4mm (Min) of pressure rating 4 KN/Sqm laid in trenches and jointed with cement solvent including testing complete all as specified and directed. |
| 95 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concret 1:2:4 type B-1 smooth finished, and reforming benching as required, for internal dia of pipe 160mm complete all as specified and directed. |
| 96 | S&F in repair 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed ncluding necessary fittings like socket, bend, elbow, single/double tee etc in any length with rubber ring joints fixed with clamps of flat iron and including bolts and nuts and securing ends of stays to wall or roof and making good with cement mortor 1:3 or with PCC 1:2:4 complete all as directed. |
| 97 | S&Fixing in repair 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed ncluding necessary fittings like socket, bend, elbow, single/double tee etc in any length with rubber ring joints fixed with clamps of flat iron and including bolts and nuts and securing ends of stays to wall or roof and making good with cement mortor 1:3 or with PCC 1:2:4 complete all as directed. |
| 98 | Returning, filling in with approved soil obtained from excavation including spreading levelling, watering and well ramming in layers n.exc. 25cm thick. |
| 99 | Removing the excavated soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point. |
| 100 | M&L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate ) for manhole cover septic tank covers slabs etc including necessary form work and set in CM (1:4). Note:- reinforcement will be measured and paid seperately. |
| 101 | M & L brick work with sub class 'B' bricks straight or curved on plan exc 6M mean radius built in CM (1:4) as in manhole, septic tank, filter bed, wall and out let drain etc. |
| 102 | M & L PCC (1:2:4) type-B0 using (12.5 mm graded stone aggregate) for benching coping etc incl necessary form work. |
| 103 | M & L Rendering 15mm thick on brick or concrete surfaces of walls in CM (1:4)with WPC @ 03 % by weight of cement including finishing the surfaces even and smooth without using extra cement as in manholes, septic tank, filter bed out let drain etc all as directed by Engineer-in-Charge.(WPC shall be measured & paid separately) |
| 104 | Material & Labour for factory made precast (Rubber moulded) concrete designer chequered tiles any colour, shape and size not less than 20 cm x 20 cm x 25mm thick (compressive strength not less than 250 Kg/Sqm), set, jointed and pointed with grey cement and pigment over and including 20mm thick CM 1:6 screed bed or bedding layer complete all as specified and directed. |
| 105 | M&L for 50mm thick sand cusioning layer under interlocking paver block complete all as specified and directed. |
| 106 | M&L for 80 mm thick machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of M-40 Grade with grey cement and pigments complete all as specified and directed. |
| 107 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed |
| 108 | M&L for Framed work as in doors or gates of Fe-290 (Gde E 165) angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, tc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed |
| 109 | Demolition of brick work/stone/boulder masonry, built in cement mortar incliding all quoins arches pillars, etc, but excluding ashlar facing , dressed stne work and precast concrete articles. |
| 110 | M & L for walling of random rubble stone masonry uncoursed well bounded badded and solidly hearted built in CM 1:6 brought upto course complete all as specified and directed by Engineer-in-Charge. |
| 111 | Ditto all as per item no 110 above but except stone. |
| 112 | Extra over stone walling for hammer dressing to face stone and dressing face beds and joints as specified of random rubble walling uncoursed or brought upto courses surface n exc 40 mm of Granite or Trap stone. |
| 113 | M&L for raised pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:4 complete. |
| 114 | M&L for raised pointing in CM 1:4 including Raking out joints/poiting to random rubble or polygonal rubble uncoursed or brought up to courses work built in cement mortar complete all as specified. |
| 115 | Dismantling posts or struts embedded in Concrete, brick work, masonry, etc. (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground all as specified and directed. |
| 116 | Dismantling of galvanised barbed wire of any description and in any postion complete all as specified and directed. |
| 117 | Excavating in post holes (or similar holes) in hard/dense soil each n exc 0.5 cu. m, getting out, in any type of soil returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed. |
| 118 | M&L for PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. |
| 119 | S & F MS posts and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire etc ; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or rivetting etc and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed by Engineer-In-Charge. |
| 120 | Mild steel screw bolts, 5 to 10mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified. |
| 121 | Material and labour for preparation of new untreated surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint (approved shade) over a coat of red oxide, zinc chrome on steel surfaces complete all as specified and directed by Engineer-in-Charge. |
| 122 | Dismantling fencing wire mesh,any type as specified and directed |
| 123 | Supply only Chain link MS galvanised fencing of mesh size (nominal pitch of wire) of 50mm and 3.15mm dia. |
| 124 | Fixing only Chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed by engineer-In-charge. |
| 125 | Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed |
| 126 | S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed. |
| 127 | Taking down carefully aluminium/copper wiring of any size (for light, fan, socket or power etc complete) including fixture and fittings such as switches, sockets, ceiling roses, pendent holders regulators, tube lights etc and making good disturbed surfaces of wall, roof etc to match with existing surface. |
| 128 | Supply & Fixing point wiring for modular fitting for one light point/ fan (independent) point controlled by one, one way switch with 1.5Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia ) with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) and modular metal flush box or mounting fittings like modular switches, sockets & fan regulators etc including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor cable earth wire and connected to earth dolly complete all as specified and directed Note:- wiring shall be done in colour coding as directed by Engineer in charge. |
| 129 | All as per item No.128 herein before but one socket outlet 5 Amps on the same board. |
| 130 | All as per item No.128 herein before but one 3 pin socket outlet 5 Amps independent. |
| 131 | All as per item No.128 herein before but one bell point controlled by one bell push switch. |
| 132 | All as per item No. 128 above but with 2.5 Sq mm two single core and 2.5 Sq mm one single core as earth wire for 5/15 Amps socket. |
| 133 | Supply & Fixing lamp holder (modular type) PVC insulated body with back plate for angle/battern fitting complete all as specified and directed. |
| 134 | S&F bell push Modular type, one way 6 Amp complete all as specified and directed. |
| 135 | S&F modular switch 6 Amp one way switch, 1 module complete all as specified and directed. |
| 136 | S&F modular socket 6 Amp 2/3 Pin combined socket shuttered, 2 module complete all as specified and directed. |
| 137 | S&F modular switch 1 way 16 Amp, 1 module complete all as specified and directed. |
| 138 | S&F modular socket 6A/ 16Amp, 2/3 pin combined, 2 module complete all as specified and directed. |
| 139 | S&F modular white cover plate with frame 2 Module complete all as specified and directed. |
| 140 | S&F modular white cover plate with frame 3 Module complete all as specified and directed. |
| 141 | S&F modular white cover plate with frame 4 Module complete all as specified and directed. |
| 142 | S&F modular white cover plate with frame 6 Module complete all as specified and directed. |
| 143 | S&F modular white cover plate with frame 8 Module complete all as specified and directed. |
| 144 | S&F anodised rust proof 18 SWG MS modular metal flush box,1/2 Module complete all as specified and directed. |
| 145 | S&F anodised rust proof 18 SWG MS modular metal flush box, 3 Module complete all as specified and directed. |
| 146 | S&F anodised rust proof 18 SWG MS modular metal flush box, 4 Module complete all as specified and directed. |
| 147 | S&F anodised rust proof 18 SWG MS modular metal flush box, 6 Module complete all as specified and directed. |
| 148 | S&F anodised rust proof 18 SWG MS modular metal flush box, 8 Module complete all as specified and directed. |
| 149 | Supply and fixing bell AC 230 volts, 50 Hz Single pole |
| 150 | S&F ceiling rose surface bakelite 3 terminal with base plate. |
| 151 | Material and labour for Sub main wiring with 2 run of 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to and including Rigid non metallic PVC conduit ( ISI marked) Heavy grade, 20 mm dia (external) inclusive of junction/terminal boxes, all fittings and accessories fixed concealed with and including 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc including taking down existing old sub main wiring complete all as specified. Note :1 The cost of earth wire is included in the quoated rates. 2. Two run of 6 sqmm, one run of 6 sqmm and one run of PVC conduit will be measured as one unit ie one running metre” |
| 152 | Supply and fixing LED lights fitting 1x 20W (warm/milky white as required on site), 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and life of tube light not less than 50,000 hours.complete all as specified and directed.. |
| 153 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible opper conductor cable of suitable size complete all as specified and directed.. |
| 154 | Supply & Fixing sheet metal enclosure for DBs(double door type) single pole and neutral 8 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed . |
| 155 | Supply & Fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 Amp and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed . |
| 156 | Supply & Fixing 240V, 10KA 'B' curve miniature circuit breaker (MCB) of single pole 5 to 32 Amp and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed . |
| 157 | S & Fixing LED Bulb 9 watt all as specified and directed by Engr-in-Charge. |
| 158 | Supply and Fixing propeller type AC ventilating fans 230 volts, 50 C/S heavy duty 1400 RPM, 300 mm sweep (Exhaust fan) metal body and blades protected by metal guards,Bird guard for safetry,two sleeves bearings, complete including the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core white 23/.0076 copper cable, rubber insulated from ceiling rose to exhaust fan motor complete all as specified and directed. |
| 159 | S & F exhaust fan made of sturdy Engineering plastic type ISI Mark, copper winding of sweep 250 mm size complete with louvers including cutting opening through brick/stone /PCC block wall, making of holes and grouting of suitable size of nuts and bolts for 300 mm exhaust fan and making good dismantled portion and making connection with wire of suitable size and connecting accessories complete all as specified and directed. |
| 160 | S & F LED light fitting 1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size with complete all as specified and directed. |
| 161 | Supply and fix water heater storage type electric supplied and installed complete steel body and heating element upto 2 KW of capacity 25 ltrs, BEE 5 Star rated including making connection with industrical socket, ultra thick SS inner tank of superior 304 grade, Fire retardant ISI Mark supply cord, Rust & shock proof ABS body, Compact & easy to install and proper hanging on nut bolts washers grouted on wall and PVC pipe for connection of hot and cold water complete all as specified and directed by Engr-in-charge. |
| 162 | M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross section area 16 Sqmm 4.00 core laid in trenches or passing through pipes/ducts and incl the disturbence surface of road making good with using PCC complete all as specified and directed. Including taking down old LT U/G Cable from trenches/protection pipe etc complete. |
| 163 | Excavation in trenches not exceeding 1.5 mtr wide, depth exceeding 1.5 mtr and getting out in hard/dense soil complete all as specified and directed by Engineer-in-charge |
| 164 | M&L for dry clean sand filling in trenches below and around under ground cable cushioning complete all as specified and directed.. Note :- Thickness of sand cushioning shall be measured after punning. |
| 165 | Supply and fix unreinforced PCC cable cover class LV type I of size 0.25x0.15x0.04mm |
| 166 | Supply and Fixing steel tube Light grade galvanised 50 mm bore with all fittings for protection of UG cable under road/culvert and fixing on wall with saddle, screw complete all as specified and directed. |
| 167 | M&L for Earthing complete with galvanized sheet earth plate electrodes 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2. 25mtr deep below ground level) with top edge of plat not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts , check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 and including excavation and earth work, GI pipe light grade 15 mm bore for protection of GI Strip from earth electrodepanel box, supplying and laying charcoal dust, common salt, PCC 1:2:4 type B1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced with 6 mm dia TMT bars @ 75mm C/C both ways with MS handle 12mm dia, PGI funnel and wire mesh,20 mm dia GI pipe light grade for watering and connected to panel box and testing complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender