Tender For Addition Alteration Watercourse To Bldg No T-238 And Bldg No T-240 Under Age B/R-Ii Of Ge 865 Ews, Leh
Tender Value
14.43 Lakhs
Estimated cost
Bid Submission
13 Aug 2026
12 days left
EMD
28900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration Watercourse To Bldg No T-238 And Bldg No T-240 Under Age B/R-Ii Of Ge 865 Ews, Leh
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. Or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out hard dense soil complete all as specified and directed by Engr-in-Charge. |
| 2 | M&L Precast cement concrete solid blocks masonry exc 10 cm in width in pcc 1:3:6 type C1, using 20 mm graded stone aggregate & set in cement motar 1:6, complete all as specified and directed by Engr-in-Charge. |
| 3 | Removal excavated material n,exc 50m and depositing where directed at a level n.exc 1.5 m above the startig point complete all as specified and directed by Engr-in-Charge. |
| 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engr-in-Charge. |
| 5 | M&L PCC 1:4:8 Type D2 (using 40mm graded stone aggregate) as in foundaion, filling and mass concrete. complete all as specified and directed complete all as specified and directed by Engr-in-Charge. |
| 6 | M&L for RCC 1:2:4 20 mm graded stone agg as in roofs Kerb in lintel upto 1.5 m clear span cills, steps, seismic and other similar bends, plinth courses, string courses etc complete all as specified and directed by Engr-in-Charge. |
| 7 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed by Engr-in-Charge. |
| 8 | S&F for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips reinforcement 10 mm and over complete all as specified and directed by Engr-in-Charge. |
| 9 | All as per item No. 8 above here-in- before but up to and including 6 to 8 mm dia in stirrups, spacers and binders as in columns and beams etc. as specified and directed by Engr-in-Charge. |
| 10 | Material & Labour 25mm thick PCC 1:2:4 type B-0 using12.5mm graded crushed stone aggregate as in sub base and finished surface as in received tiles complete all as specified and as directed. |
| 11 | M&L for Glazed ceramic coloured tiles in vertical surface 300x600x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match (Note: Any disturbed surfaces shall be matched w/o any extra cost to the govt) incl 10mm thck screed bed below tile for dado/skirting CM 1:4 or including 3mm thick cement based high polymer modified quick set adhesive confirming IS 15477 complete all as specified and as directed. |
| 12 | M&L for 7mm thick non skid ceramic coloured tiles (area of each tile exc 0.18 and nexc 0.38 sqm) etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments including grounting the joint and 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and as directed. |
| 13 | Taking down chowkhat or frames exc 1.50 Sqm n.exc 4 Sqm (without taking down shutters from the frames complete all as specified and as directed. |
| 14 | Taking down chowkhat or frames n.exc 1.5 Sqm (without taking down shutters from the frames complete all as specified and as directed. |
| 15 | S&F in repair Door closer hydraulically regulated designation No 3 universal type, aluminium body suitable for door shutters of up to 900 mm to 1000 mm in width and weight not more than 35 Kg and fixed complete all as specified and directed. |
| 16 | S&F 200 mm long Brass barrel tower bolts, with brass screws complete all as specified and directed. |
| 17 | S&F Brass sliding door bolts 250 mm long and fixed with brass screws to wooden doors complete all as speciifed and directed. |
| 18 | S&F Brass butt hinges 125 mm long type C11 with brass screws fixed to wooden doors complete all as specified and directed |
| 19 | S&F Brass handles 150 mm long polished bright with brass screws complete all as specified and directed. |
| 20 | M&L rendering 15mm thick in cm 1:6 concrete or brick surfaces as in wall finishes even andsmooth w/o using extra cement incl mixing of wpc complete all as specified and as directed . |
| 21 | S&F 25mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified. |
| 22 | S&F PVC (SWR) pipe 110 mm bore single socketed ,in any length with rubber ring joints,laid in trenches or in floors cement complete all as specified |
| 23 | S&F PVC (SWR) 110mm bore bends any radius, complete all as specified |
| 24 | S&F PVC (SWR) 110mm bore junction single (single T), equal/unequal complete all as specified |
| 25 | M&L 75 mm bore PVC (SWR)) multi floor trap with grating including jointing with solvent cement |
| 26 | S&F PVC (SWR) 'S' trap 110mm bore for EWC/IWC |
| 27 | S&F floor mounted, white vitreous china single piece double traps syphonic water closet of approved brand/make, shape,size and pattern incl integrated white vitreous china cistern of capacity 10 Ltrs with dual flushing system, including all fitting & flxures with seat cover, cistern fittings, nuts bolts and gasket etc and making connection with P/S traps complete all as directed. |
| 28 | S&F wash hand basin table top type fixed on granite top grooving and cutting if required in size of 600x385x195mm |
| 29 | S&F single lever Basin mixer without popup waste system with 450mm long braided hoses |
| 30 | S&F (health faucet) CP with 8 mm dia. 1.2 Metre long flexible tube and wall hook complete all a specified and directed. |
| 31 | S&F chromium plated toilet Roll holder fixed on walls complete all as specified and directed. |
| 32 | S&F angle valve with wall flange 15 mm bore cast copper alloy fancy type, cromium plated with cup complete all a specified and directed. |
| 33 | S&F chromium plated brass bib tap fancy type long body screwed down ,screwed for iron pipe or for brass ferrule 15 mm bore complete all a specified and directed |
| 34 | S&F CP brass towel ring fixed with and incl CP brass screws and complete all a specified and directed |
| 35 | S&F Soap dispensor fixed with and incl CP brass screws complete all a specified and directed. |
| 36 | S&F chromimum plated brass 32 mm click waste coupling for table top wash hand basin half or full thread fixed complete all as specified and directed. |
| 37 | S&F 32 mm bore brass chromium plated bottle traps for wash basins, sinks, urinals etc with inlet and outlet screwed for pipe or connection including necessary packing, union and cap complete all as specified and directed. |
| 38 | S&F PVC connections 15mm size with CP nuts of length 600mm complete all a specified and directed. |
| 39 | M&L for 14 to 16 mm thick rubby pink or Rubby red granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including pointing with admixture of pigment to match with shade of granite complete all as specifeid and directed. |
| 40 | Grinding and polishing on new or existing granite surface of floor and wall including cleaning complete all as specified and directed. |
| 41 | S&F Grating doom 125 mm with waste hole of CP |
| 42 | S&F 25 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed |
| 43 | S&F 25 in repairs PP-R Gate valves (brass insert) conforming to ISO 2000 screw down end for PPR pipe or for union and fixed completey as specified. |
| 44 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-Charge. |
| 45 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long - 01 Nos, hinges type B-21 100mm long - 02 Nos, suitable handle - 01 Nos etc in each shutter complete all as specified and directed. |
| 46 | M&L for figured glass pin head type 4.00mm thick ordinalry quality and glazing with oil putty or wooden beads in square or fixed with aluminium section including rubber beads not exc 0.50 sqm in each pane complete all as specified and as directed by Engr-in-Charge. |
| 47 | M&L for providing cement concrete 1:3:6 type C-2 bed to 150mm bore of drain pipes including packing under and haunching against the sides of pipes after they are laid and tested.. |
| 48 | S&F, 150mm dia bore (inner dia) double wall corrugated HDPE Pipe (SN-8) in any length including all fittings and jointing with eastomeric rubber link and cuppler /other jointing materials laid in trenches are in floors all as sfd and directed by Engr-in-charge. |
| 49 | Dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members complete all as specified and directed. |
| 50 | S&F urinal partition glass floor mounted with 12 mm thick height 900 and width 450mm curved type colour finish tinted or grey edge straight top shape flat complete all as specified and directed. |
| 51 | S&F cubical toilet cabinet (1.05 x 1.50 x 2.10) mtr of 18mm thick HPL compact board inner circulation area not less than (900 x900) mm, standard door with extended 150 to 175mm above floor hight with snib lock 45mm long and head rail, brackets, adjustable cubical legs, heavy duty hinges and cubical latches, door handle, door accessible sinage on the door with PVC edging, colour, design as approved by GE malvern plus cubical system or equivalent make to provided. |
| 52 | S&F fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) door shutter with frame, partly glazed with 5mm thick tinted glass and partly panelled with 12mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150mm size, aluminium barrel tower bolt 200mm size, including hydrolic door closer all as specified and directed. (a) Frame ( top & side) section shall of size 101.60 x 44.75 x 2.4mm (Section No 14021) (b) Vertical Members of shutter section shall be of size 85.00x44.45x2.00mm (section No 19560) (c) Top Members of shutter Section shall be of size 83.50 x 44.45 x 2.00mm (section No 19581) (d) Lock rail (Middle member) of shutter section shall be of size 150.00x44.45x3.00mm (section No 19596) (e) Bottom Members of shutter section shall be of size 150.00x44.45x3.10mm (section No 19584) (f) Glazing clip for securing glass of shutters shall be of 0.80mm thick (section No 19370). |
| 53 | S&F in repairs brass mortice lock 4 levers (Harrison) vertical type size 100 mm or above on new position complete all as specified and as directed. |
| 54 | S&F gypsum ceiling board 8 to 9 mm thick in 600 x 600 mm pannel designer ceiling tiles laminated with white colour PVC film on the face side and a metalised polyster film on the back side, conforming to IS-14862 type B category three including suspended false ceiling using E-grid suspended ceiling grid system of grid size 600x600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross Tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24mm to be placed in the grid suspended by 4mm GI wire hanger to be fixed as per site requirement including taking down of old false ceiling complete all as specified and directed. |
| 55 | S&F white vitreous china battery based infrared sensor operated urinal of size 350 x 340 x 650mm having pre & post flusing with water 125ml to 500ml consumption, having water inlet from back side, including fixing to wall with suitable fastener or bracket with CP coupling & waste pipe all as direceted. |
| 56 | Rotational moulded polyethylene puf insulated water storage tank (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 litres complete all as specified. |
| 57 | M &L, Soakage well of 3.0 mtr internal dia at top and min 1.80 mtr dia at bottom having min 3.00 mtr height of 380mm thick random rubble uncoarsed stone masonary wall in CM 1 :6 with 150mm thick PCC 1 : 4 :8, type D-2 (using 40 mm graded stone aggregate) below stone masonary at bottom and RCC slab using design mix M-25 with reinforcement 10mm dia bars @ 150mm C/C bothways cranked at 1/4 th of span including arrangement for manhole opening and manhole cover, inlet for 100 /150mm dia pipe and rest all as sfd as per Drg No CESZ/TD-1078/2011 sheet 1/1 Note :- The rate including excavation in hard/dense soil and construction of soakage well as per drg, connection of inlet pipe, 100 mm dia PVC vent pipe with cowl, returning filling and removing of surplus soil to a distance exc 50 mtr but n.exc 100 mtr from site. |
| 58 | S&F in repair LED mirror with Touch sensor, 3 light effect glass squre/ Round in size (30x30 inch) fixed to wall or tile surface as approved by GE complete all as specified and directed by Engr-in-Charge. |
| 59 | Providing 50mm thick insulation of water pipe line 25/32 mm dia pipe which includes of the following:-Heating wire (Chromalox/Danfoss) alongwith Thermostat for each 20RMAluminum tapeK. Flex 19mmRock woolWire MashCello tapeAluminum sheet 28 gauge |
| 60 | Point wiring complete with 1.5Sq.mm nominal area of copper conductor multi stranded FRLS PVC insulated and unsheathed 1100 volts cable drawn through & including PVC Casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5Sqmm copper conductor cable as continuous earth lead all as specified and directed for the followings:- |
| 61 | One light/exhaust fan point controlled by one way switch |
| 62 | One switch socket outlet 6 amps, 230 volts, on the same board |
| 63 | One switch socket outlet 6 amps, 230 volts, on independent board |
| 64 | All as per item No. 61 above here-in- before but using cables 4 sqmm sixe |
| 65 | Supply and fix of Switch piano flush button single pole 6 Amps 230 volts one way complete all as directed. |
| 66 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexiblecopper conductor cable of suitable size complete. |
| 67 | Supply and fix of Ceiling rose, surface Bakelite three terminals complete all as directed. |
| 68 | Supply & Fixing LED lights fitting 1 x 20W, 220 V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 69 | Supply & fix sheet metal enclosures for DB's Single pole and Neutral 04 way with 200 Amps rated bus bar. |
| 70 | Supply and fixing 240 V 10 KA 'C' Curve SPN 40 Amps complete with connection testing and commissioning. |
| 71 | Supply and fixing 240 V 10 KA 'C' Curve SP 6-32 Amps complete with connection testing and commissioning. |
| 72 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables 1100 Volts grade with stranded aluminium conductor of following sizes :-10 sq mm ,2 core |
| 73 | Supply and fixing Exhaust fan , steel body AC Single phase 230V of size 300 mm sweep with blades frame and lovers complete all as specifide and directed by Engr-in-charge. |
| 74 | Supply and replacement of Switch piano flush button single pole 6 Amps 230 volts one way complete all as directed. |
| 75 | Supply and replacement of Socket out let two in one 5 pin 6 Amps flush type.230 volts complete all as directed. |
| 76 | Supply and fix sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 4 Ways all as specified and directed by Engr-in-Charge. |
| 77 | Supply and fix MCB SPN 63 Amp 240 Volts AC ISI marked all as specified and directed by Engr-in-Charge. |
| 78 | Supply, install, testing complete water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 Litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipes etc |
| 79 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type ( Warm White )with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed |
| 80 | Supply and Fixing only in Replacement LED light fitting 1X10 W, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 81 | Deduct Schedule of Credit of Rs (-) 5050.00 (Minus) as listed in Schedule 'A' (Contd). Contract Sum shall be arrived after deducting the credit amount.Note :- Tenderers will not quote against this item being a firm amount. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender