Tender For special Repair Bldg No P-462 (Single Jcos Living) Of 53 Med Regt , Provision Of Parking Shed For Capt Qtrs At Bhim Road Fafa And special Repair Of Servant Qtrs, Store Room, Garrage And Main Gate Bldg No P-07 Mall Road Under Ge (West) Jrc
Tender Value
48.67 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
9 days left
EMD
97340
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Bldg No P-462 (Single Jcos Living) Of 53 Med Regt , Provision Of Parking Shed For Capt Qtrs At Bhim Road Fafa And special Repair Of Servant Qtrs, Store Room, Garrage And Main Gate Bldg No P-07 Mall Road Under Ge (West) Jrc
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of PCC in Ground floors/PCC Path/Plinth Protection and paving not exceeding 15cm thickness (below or above ground level) etc, complete all as specified and directed |
| 2 | Demolition of brick work or stone/boulder masonry, built in cement mortar or cement sime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles, complete ali as specified and directed. |
| 3 | M&L for Brickwork with subclass 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 4 | All as per item No 3.00 above but except bricks etc, complete all as specified and directed |
| 5 | M& L for Brick work with sub class 'B' bricks using old size bricks straight or curved on Sqm plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed. |
| 6 | Dismantling of brick tiles single layer as in roof covering, complete all as specified and directed |
| 7 | Demolition of mud in roofs any thickness including plastering and leeping(whether full thickness removed or only a part thereof) removing surplus spoil out of Defence Land, complete all as specified and directed |
| 8 | M&L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in roof padding ,Complete all as specified and directed. |
| 9 | M&L for 10mm thick screed bed or bedding layer of mortar in CM 1:4, using WPC, complete all as specified and directed |
| 10 | Supply only integral waterproofing compound, complete all as specified and directed |
| 11 | M&L for painting the roof surface with a coat of hot blown paving industrial bitumen 85/25 at the rate of 1.20 kg/sq M over a coat of primer @ 0.3 litre per Sqm Complete all as specified and directed. |
| 12 | M&L for APP based polymeric membrane minimum weighing 3 Kg/sqm and minimum 3mm thick reinforced with five layer polyster non wove fabric (with not less than 150 gms/sqm) land on bitumen coted surface by forced application, complete all as specified and directed |
| 13 | M&L for 40 mm thick brick tiles laid on mud mortar and joints grounted flush in cement mortar 1:3 mixed with 5% crude oil by weight of cement on mud phuskha, complete all as specified and directed |
| 14 | All as per Item No 13.00 above but except brick tiles (cleaning of old reused brick tiles shall be included), Complete all as specified and directed. |
| 15 | M&L for flush pointing in cement mortar 1:3 on brick tiles laid flat on roof surfaces etc, complete all as specified and directed |
| 16 | M&L for PCC 1:2:4 Type B-0 (12.5 mm graded stone aggregate) as in bed blocks, coping, etc, complete all as specified and directed |
| 17 | Demolition of cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 18 | M &L for Water proofing treatment to sunken floors of kitchen, toilets, laboratories, bath and WCs etc shall be as under:-(aa)The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil, surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement laitance, existing coating and achieve a gripping profile that is clean, dry and free from laitance and dry other form of surface contamination. The installation instructions in manufacture's published literature should be strictly complied with, including but not limited to the following:-(bb)Chipping out any visible cracks in \\"V-Groove\\" pattern as applicable. Special attention on this part. Cleaning of cracks & then filling those cracks with SIKA latex SBR 100 putty/Dr Fixit 302 SBR latex/ Perma latex SBR/FOSROC Nitabond SBR latex/Asian paint latex as required. Final cleaning of surface with power grinder, wire brush, hair brush & vacuum pressure if required.(cc)Dampen all surfaces immediately ahed of application of Acrylic modified Cementitious coating of sika Top Seal-107/Brush Bond FOSROC/Dr Fixit/STP/CICO.(dd)Whilst the surface is still damp from saturation (S.S.D), apply one coat of Acrylic modified cementitious coating of SIKA Top Seal-107 /Brush Bond FOSROC/Dr Fixit/STP/CICO of viscosity as per manufacturer's instructions. (ee)Apply glass fabric sheet of SIKA Fab 1/FOSROC/Dr Fixit/STP whilst the first coat is wet.(ff)Once touch dry, apply second coat of Acrylic modified cementitious coating of SIKA Top Seal -107 /Brush Bond FOSROC/Dr Fixit/STP/CICO of viscosity as per manufacturer's instructions on the entire area.(gg)Second coat shall be applied after 6-8 Hrs of application of previous coat and in the direction right angle to the previous coat.(hh)The waterproofing coating should be taken to a height minimum 300mm above the finished floor level on the vertical surfaces.(jj)It is essential to cure Acrylic modified cementitious coating immediately after application (minimum 6-8hrs drying) for a minimum of 3 to 5 days to ensure full cement hydration and to minimize cracking.(kk)A protection plaster 12-15mm thick) in CM 1:3 admixed with appropriate integral water proofing compound has to be applied on the walls. Admixture: SIKA Plastocrete Plus/FOSROC/DR Fixit/STP/CICO conforming to IS 2645.Providing and applying a protection screed of 50mm thick 1:4, cement sand mortar admixed with SIKA Plastocrete over the applied water proofing coating on horizontal surfaces. Admixture: SIKA Plastocrete Plus/FOSROC/DR Fixit/STP/CICO conforming to IS 2645.(ll)All the corners and joints should be pretreated with an elastic waterproofing sealing tape with a woven bonding mesh on each surface and an elastic expansions zone in the centre of Make SIKA Seal Tape/FOSROC/Dr Fixit/STP.(mm)The membrane has to be protected in accordance with the manufacturer's recommendations until placement of concrete. The membrane to be inspected for damage just prior to concrete placement and make repairs in accordance with manufacturer's recommendations.(nn)Waterproofing treatment has to be carried out through applicators authorised by the respective manufacturer's and approved by GE.(ii)All the joints of pipes and traps within the sunken portion shall be sealed properly by epoxy sealent.(iii)All CI traps in sunken slab to be enclosed with PCC 1:1.5:3 (Min 15cm) all around.(iv)The sunken portion shall be filled with PCC 1:5:10 type E-2 (using 40mm stone aggregate) complete all as specified.(v)Providing drainage spout pipe GI pipe 40mm dia bore light grade upto outside of outer wall ( Approx 450mm to 600 mm long ) including cutting to existing wall and making good the disturbed surface complete all as specified and directed.(vi)Providing 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring for laying floor finish all as specified.Note:-Item No 18 (iv) ,(v) &(vi) shall be measured and paid seprately. |
| 19 | M&L 25 mm thick cement concrete flooring type B-1, 1:2:4 using 20 mm graded stone aggregate finishing cement concrete surface even and smooth without using extra cement. |
| 20 | M&L for cement concrete type E - 2, 1:5:10 (using 40 mm graded stone aggregate) as in sunken flooring. |
| 21 | M & L for 50mm dia GI pipe,med grade beveled cut at both ends by making hole in walls sunken portion aprox above the RCC slab and ceiling finished the hole with cement plaster 1:2 to match with existing surface complete etc.(Measured for cutting holes shall be paid in concerned sch item). |
| 22 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc .and brushing neat cement slurry with 3 kg of cement per sqm, complete all as specified and directed. |
| 23 | M&L for joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed |
| 24 | All as per description of serial item No 23.00 here-in-before but skirting on wall in CM 1:4, complete all as specified. |
| 25 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 26 | M&L for coloured glazed ceramic tiles in vertical surface 450x350x7 mm thick laid over Sqm and including 10mm thick cement plaster in CM 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match. Complete all as specified. |
| 27 | M&L for stair case tiles single piece of suitable length & width as per site reqmt of 10mm thick for steps/riser of size as per site requirement required laid over & incl.15mm thick cement screed base in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, complete all as specified and directed. |
| 28 | M&L durastone tiles 400x400x10-12mm thick chequred pattern, in Floors, set and jointed in Neat Cement Slurry and pointed in White Cement mixed with Pigment to match the colour of Tiles over 15mm thick Screed Bed or Bedding in Cement Mortar 1:6, complete all as specified and directed. |
| 29 | M&L for 75mm thick cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in plinth protection finished even and smooth (without using extra cement), complete all as specified and directed. |
| 30 | Demolition of reinforced cement concrete(reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for, complete all as specified and directed |
| 31 | MSL for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 32 | Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal/sloping), fair finished surfaces concrete flat, complete all as specified and directed. |
| 33 | MSL for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to, complete all as specified and directed |
| 34 | Taking up or down Steel Tubing bore of pipe in 15mm and connections, including cleaning for refixing or removal to store etc, complete all as specified and directed |
| 35 | All as per item No. 34.00 above but of 20mm bore, complete all as specified and directed |
| 36 | S&F Steel Tubes Medium Grade Bore of tube in 15mm galavanised with all fitting laid in trenches, walls, ceiling or laid in floors etc, complete all as specified and directed |
| 37 | All as per item No. 36.00 above but of size of 20mm bore, complete all as specified and directed. |
| 38 | S&F in vitreous china wash basin pedstal white flat black of size 550x 400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed. |
| 39 | S&F in repair vitreous china wash down water closet, \\"Orissa pattern, size, 580x440mm white, with integral foot rest (excluding flushing cistern and flush pipe) but including trap provision of cement concrete bedding, complete all as specified and directed |
| 40 | S&F in repair vitreous china wash down water closet pan white excluding fixing bolts, flushing cistern and flush pipe with and incl 'P' or 'S' trap and making good to floor to match with existing all as specified and directed. |
| 41 | S&F in repair Jet spray with holder for EWC 1.5mtr long suitable for 15mm dia for iron pipe or for brass ferrule all as specified & directed. |
| 42 | S&F in repairs plastic seat cover white for water closet pedestal pattern closed patter with flat bottom fixed with mild steel chromium plated or aluminium hinging device complete all as specified. |
| 43 | S&F in repair Low Level Flushing cistern PVC valveless syphonic action type, 10 Itrs capacity including supply pipe & fixing brackets of M.S. angle of size (25mmx25mmx3mm), 30 cm long in PCC (1:2:4) type B-1, block of size (10cmx10cmx10cm) on walls etc, complete all as specified and directed |
| 44 | S&F in repair fancy type, brass chromium Plated stop valves/Angle valves, cast copper alloy, bore dia of pipe in 15mm, screwed down, high pressure, with crutch or but-terfly handle, screwed both ends for iron pipe and fixed, complete all as specified and directed |
| 45 | S&F in repair fancy type, brass chromium Plated stop valves/Angle valves with long shank and cup (concealed type), cast copper alloy, bore dia of pipe in 15mm, screwed down, high pressure, with crutch or but-terfly handle, screwed both ends for iron pipe and fixed, complete all as specified and directed |
| 46 | M&L for chromium plated long body bib tap cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe and fixed to 15mm bore pipe fixed as in repairs including taking down old tap of any description, complete all as specified and directed |
| 47 | Supply and fix in repair, 15mm bore swan neck pillar taps, cast copper alloy with capstan heads chromium plated, fancy type, screwed down high pressure with or without lettered Hot or Cold with long screwed shank and fly nuts, complete all as specified and directed. |
| 48 | S&F PVC connection 15mm size with PTMT nuts of length 450mm etc, complete all as specified and directed. |
| 49 | S&F chromium plated grating 100 mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified and directed. |
| 50 | S&F in repair gun-metal, globe or gate valves for 20mm bore dia of pipe, with iron wheel head, screwed both ends for iron pipe and fixed to steel pipe or union, Complete all as specified and directed. |
| 51 | Supply and fix in repairs shower rose of brass chromium plated with shower arm 195mm long with bend of 45 degree 15mm dia. Complete all as specified and directed.. |
| 52 | S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed. |
| 53 | S&F in repair Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms). |
| 54 | S&F Brass CP Soap dish, any type, fixed to plugs with chromium plated brass screws all as specified and directed. |
| 55 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed. |
| 56 | S&F in repair, corner shelf 300mm (with brass brackets) and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 57 | S&F 600mm x 450mm mirror of selected quality 4mm thick glass mounted on and including 6mm thick commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers including fixing arrangement as approved complete all as specified and directed. |
| 58 | S&F waste coupling including waste pipe suitable for WHB of any bore dia of PTMT (half or full threaded), (Minimum weight 45gms) complete all as specified and directed. |
| 59 | Dismantling PVC water tank of capacity 1000 Ltr and S&F new rotational moulded polyethylene water storage tank of capacity 1000 Itr (cylindrical vertical with closed top) hoisted and fixed in position all as specified including 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed. |
| 60 | Taking down eaves gutter and rain water pipes (any size and pattern), including all fittings, heads, shoes, bends, swan necks, etc. removal from site (measured overall as fixed along the centre line or fittings and accessories) complete all as specified and directed. |
| 61 | S&F 110 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints laid in trenches or in floors or fixed to walls with stack clamps ,Complete all as specified and directed. |
| 62 | S&F 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to wall with stack clamps , laid in trenches or in floors, complete all as specified and directed |
| 63 | S&F 110 mm bore PVC(SWR) bend any radius, complete all as specified and directed |
| 64 | S&F 75mm bore PVC (SWR) bends any radius provided with access door, complete all as specified and directed |
| 65 | S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed |
| 66 | S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed |
| 67 | S&F PVC (SWR) floor trap of 110mm outlet dia, plain including jointing with solvent cement, complete all as specified and directed |
| 68 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed |
| 69 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 on walls, finished even and smooth without using extra cement, complete all as specified and directed. |
| 70 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on walls, finished fair and even, complete all as specified and directed. |
| 71 | M&L for 5mm thick Rendering in CM 1:3 on brick work or concrete surfaces on ceiling finished even and smooth without using extra cement etc, complete all as specified and directed |
| 72 | M&L for preparation of new plastered surfaces and applying two coats of cement base paint over and including a coat of primer, complete all as specified and directed. |
| 73 | M&L for preparation of new plastered surfaces and distempering walls with two coats of oil emulsion distemper, white or tinted over and including 1mm thick wall care putty including primer, complete all as specified and directed. |
| 74 | M&L for preparation of newly plastered surfaces and applying three coats of White Wash on ceiling etc, complete all as specified and directed |
| 75 | All as per item No. 74.00 above but over old surfaces of ceiling, including removal of existing treatment, complete all as specified and directed |
| 76 | M&L for complete removal of existing treatment and applying two coats of oil emulsion distemper white or tinted over and including 1mm thick wall care putty including primer, complete all as specified and directed. |
| 77 | M&L for complete removal of existing treatment and applying two coats of cement base paint, complete all as specified and directed. |
| 78 | Taking down chowkats or frames with shutters not exceeding 1.5 sqm each (without taking off shutters from the frames), complete all as specified and directed. |
| 79 | Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area exc 1.5 Sqm but n-exc 4 sqm each. |
| 80 | S&F in repair factory made built-in steel cup board with pressed steel frame and pressed steel shutter 1.00mm thick fixed to masonry wall by hold fasts, made out of 25x3mm flat iron including MS hanging rod of 20mm dia with brackets fixed on inner side of cupboard, provn of MS peg set 3 pegs fixed on inner side of shutter and 1.00mm thick black sheet 3 Nos shelves as shown in Drg including spray painting with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surfaces of frame and shutter and fixing in PCC (1:2:4) all as directed and shown on Drg No CEJZ / TD-1104/08 Sheet 1/2 to 2/2, complete all as specified and directed. |
| 81 | S&F 125 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete as specified. |
| 82 | S&F factory made flush shutters, 35mm thick, solid core construction with block board core & ply wood face panels, commercial type on both side incl 40X 6mm thick 2nd class HW lipping on edge, complete all as specified & directed. |
| 83 | S&F 35 mm thick IInd class hard wood glazed or skelton shutter factory made open rebated prepared to receive glass, gauge etc.without sash bars edges of framing plain fitted with cut & mitred beads for securing glass etc size of member all as per clause 8.23 (a) of SSR part-I |
| 84 | S&F solid PVC frame as in door, of size 50mm x47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube and edges will be painted to match with printed sheets, suppyling & fixing in opening as per specification & drawing, Complete all as specified and directed. |
| 85 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; & 5mm thick x 15mm wide PVC sheet beading use inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree)used Panelling of wood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed |
| 86 | S&F stainless steel steel butt hinges cold rolled of size 100mm medium weight, complete all as specified and directed |
| 87 | S&F Aluminium anodised, barrel tower bolts 200mm long of extruded section and fixed, complete all as specified and directed. |
| 88 | S&F Aluminium handles, cast type anodised of size 150mm etc, complete all as specified and directed |
| 89 | S&F 300mm long mild steel sliding door bolts stove enameled black,with bright bolt not less than 12 mm dia with and including minimum of 6 bolts and nuts,four on bolt plate and two on staple plate complete all as specified. |
| 90 | S&F 125 mm size butt hinges medium weight cold rolled mild steel, complete all as specified and directed. |
| 91 | S&F 200 mm long mild steel tower bolt stove enameled black with bright bolt, complete all as specified and directed. |
| 92 | S&F 150 mm mild steel pressed handles oval type ,stove enameled black, complete all as specified and directed. |
| 93 | S&F mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate welded to steel frame/ screwed to wooden frame complete all as specified and directed. |
| 94 | S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor overall length of cover plate 75mm complete all as specified and directed. |
| 95 | S&F in repairs 20mm dia curtain rails mild steel chromium plated with fixing brackets fixed, complete all as specified and directed. |
| 96 | Supply & fix factory made steel windows 1.25 mm thick Box type (primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises of glazed skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two open able leaf consisting two Nos sash bar of 'T section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type 'T' section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 using 20mm graded stone aggregate. Four Nos for each window including following fittings welded to framed shutter: (a) Holdfasts 150mm long 12mmx3mm made to shape per window -04 Nos (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf-01 No (c) MS tower bolt 150mm long per leaf -02 Nos (d) Z sec 20mm x 25mm, 100 long stopper per leaf -01 No (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf-01 No (f) MS pintal hinges of size 75mmx12mm per leaf-02 Nos. (g) Fabrication and fixing arrangement as per drawing No CEJZ/TD/1019, Sh 1/3 to 3/3 and No. CEJZ/TD/1020, Sh 1/3 to 3/3 |
| 97 | All as per item No 96 and above but window with glazed shutter. |
| 98 | S&F mild steel work as in as in grill gratings etc with ends of bars shouldered and or riveted or fixed in spike, framed guard bars barred iron doors ladders frame balusters walk ways confirming to Fe- 290, Gde E-165 complete all as specified and as directed. |
| 99 | S&F Steel ventilator, fixed type with glazing bars, complete all as specified and directed |
| 100 | S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane, complete all as specified and directed. |
| 101 | S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, wodden beads to steel windows/wodden doors, complete all as specified and directed complete all as specified and directed. |
| 102 | S&F Rolled mild steel section as in joist, chanel, angle, or tee section fixed independently without connecting plates, etc (cut to ordinary length i,e within 20mm of the length indicated) of Fe-410w (Gde-E-250) quality A, complete all as specified and directed |
| 103 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint. |
| 104 | M&L for preparation of old painted surfaces of steel of any description not other wise described over 10cm width or girth and applying one coats of synthetic enamel paint all as specified. |
| 105 | M&L for preparation of new wood surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 106 | Repairing of RCC projections chajjas, roofs, facia etc by necessary preparation, scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC and providing cement concrete (1:1.5:3) using 12.5 mm graded crushed stone aggregate including necessary form work and reinforced with chicken wire mesh and rendering 15mm thick in cement mortar 1:3 in patches area not exceeding 5 sqm each and thickness of RCC member not exceeding 100mm at any height complete all as specified and directed. |
| 107 | Excavating in post holes(or similar holes) each n exc 0.5 Cum getting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm , watering, and removing surplus soil to a distance n exc 50m and making good surface complete. |
| 108 | PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations filling and mass concrete etc complete. |
| 109 | Rolled sections as in main and cross beams, hip and jack rafters; purlins of Fe 410 W (gde- E-250) quality B where connected to common rafters and and connecting plates guides for sliding doors, fixed with angle cleats or other running rails. |
| 110 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 111 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft /loose soil.complete all as specified and as directed. |
| 112 | Removing excavation soil exc 250 but n.exc 500 Mtr & depositing where directed at a level n.exc 1.5 M above the starting point. |
| 113 | M&L 100 mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone agg as in sub base finishing the surface even and rough to receive floor finishes complete all as specified and directed. |
| 114 | M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement pigment, confirming to IS 15658-2006of 60 mm thickness M 35 Grade complete all as specified and as directed. |
| 115 | M&L PCC 1:2:4 type B-1 (using 20 mm graded stone agg) as in seismic and other similar bands, coping, bed block or similar work including necessary form work complete all as specified. |
| 116 | M&L brushing neat cement slurry with 3kg of cement per sqm complete all as specified. |
| 117 | M&L for PCC 1:2:4 type B-0 (using 20 mm graded stone aggregate)as in padding over roof finished and laid to required slope complete all as specified and as directed. |
| 118 | M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is still green finished even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and as directed. Note :- Water proofing compound shall be measured separately. |
| 119 | Supply only Liquid water proofing compound complete all as specified and as directed of as per manufacturer instruction. |
| 120 | Providing and applying liquid Polyurea-PU based hybrid elastomeric water proofing membrane (including fibre mesh) at existing/newly constructed roofs, RCC structure like basement raft, retaining wall, water retaining structure, tunnels/subways and bridge deck etc. in two or more coats. The product must have pot life of >90 mins., tensile strength > 12.6 Mpa, elongation of > 500% conforming to ASTM D 2370 & puncture resistance of >200 N as per ASTM E 154 with min. consumption of 1.5 Kg per sqm for 1.2mm DFT in two-three coats. The surface needs to be primed with water soluble self impregnated epoxy primer in two coats to be applied @ 200-250 gms/sqm/coat prior to Polyurea -PU application. Furthermor, (in case the substrate is not suitable) 15mm plaster is advisable for surface prepration before application of the water proofing membrane to avoid pinholes or functional difficulties of the system.Note:- The application shall be done by the authorised applicator of the manufacture with a letter of proof stating the authenticity of the applicator firm. |
| 121 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth w/o using extra cement all as specified and directed. |
| 122 | M&L for preparing new plastered or unplastered wall surfaces and applied two coat of cement base paint over one priming coat complete all as specified and directed. |
| 123 | M&L Plastering 5mm thick in cement mortar (1:3) finished even and smooth without using extra cement as on ceiling complete all as specified. |
| 124 | M&L for preparation of Old plastered surfaces of ceilings and applying two coats of white wash etc, complete all as specified and directed |
| 125 | M&L for preparing new surfaces plastered or unplastered surfaces of walls by applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 126 | S&F 15 mm bore galvanized steel water tubing, medium grade with all fittings fixed to wall (including cutting chases), ceiling or laid in floors complete all as specified. |
| 127 | S&F 20 mm bore galvanized steel water tubing, medium grade with all fittings fixed to wall (including cutting chases), ceiling or laid in floors complete all as specified. |
| 128 | Supply, hoist and fix in repairs position; 500 litres capacity rotational moulded polythene water storage tank (cylindrical, vertical with closed top) ISI marked (Name of firm embossed or engraved on the body of tank) conforming to IS 12701, double layered including dismantling the existing tank complete all as specified. |
| 129 | Supply, hoist and fix in position; 1000 litres capacity rotational moulded polythene water storage tank (cylindrical, vertical with closed top) ISI marked (Name of firm embossed or engraved on the body of tank) conforming to IS 12701, double layered including dismantling the existing tank complete all as specified. |
| 130 | Demolition and breaking 100/75 mm dia drain pipe (AC Pipe) set in cement mortar. |
| 131 | S&F 110 mm bore PVC (SWR) pipe of pressure rating 6kgf/cm2 single socketed in any length with rubber ring joints jointing with adhesive fixed in repair to wall/laid in trenches complete all as specified and directed. |
| 132 | M&L for Cutting holes in brick walls in cement mortar exc half brick but not exc one brick wall for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required. |
| 133 | S&F rolled sections as in main and cross beams,hip and jack rafters,purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates. confirming to grade Fe-290-W complete all as specified and directed. |
| 134 | M&L for prepration of old decorated surfaces of walls, washing rubbing down and stooping of distempered and painted surfaces and applying one coat of oil bound distemper complete all as specified and directed. |
| 135 | M&L for prepration of old wooden surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 136 | M&L for preparation of new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 137 | S&F sheet glass 3mm thick ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 Sq.m in each pane complete all as specified and as directed. |
| 138 | Mild steel conforming to Fe 290, Gde E-165 framed work as in door frames, chowkhats including necessary cutting, welding, bending, drilling and cutting holes for holdfast into the jambs etc, complete all as specified and directed. |
| 139 | S&F 35 mm thick plain, framed, panelled shutters factory made of second class hard wood (Hollock/ Bonsum/ Champlas) door shutters with two panels having lock rail and panels of 9mm BWP commercial ply, the size of rail and style as per IS 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified under the circumstance of extreme urgency of the work and operational functions. |
| 140 | S&F 35mm thick glazed and skeleton shutters of 2nd class hard wood (Hollock / Bonsum / Champlas) open rebated and prepared to receive glass gauze etc without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I Sec 8 clause 8.23 (a). |
| 141 | S&F 100 mm size butt hinges galvanized mild steel, medium weight, cold rolled complete all as specified. |
| 142 | S&F 250 mm mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete. |
| 143 | S&F 150m mild steel semi barrel tower bolt, riveted or spot welded type with back plates, with bright bolt and open staple, and fixed. |
| 144 | S&F125mm mild steel pressed handles, oval type, stove enamelled black. |
| 145 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter for rough finished flat surfaces. |
| 146 | M&L RCC (Nominal mix) 1:2:4 type B1 (Nominal mix) (using 20mm graded stone aggregate) as in foundation, plinth beams, bases for columns, etc and mass concreting. |
| 147 | M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces. |
| 148 | M&L RCC (Nominal mix) 1:2:4 type B1 (Nominal mix) (using 20mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified. |
| 149 | Mild steel TMT bars 5mm dia over and upto 10mm as in stirrups for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete. |
| 150 | M&L for non skid ceramic, coloured, tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match with colour of the tiles over and including screed bed of 15mm thick cement mortar (1:6) complete all as specified and as directed. |
| 151 | M&L for non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in skirting set and jointed in neat cement slurry and pointed in white or colored cement to match over and incl 10mm thick rendering as backing coat of CM 1:6 complete all as specified. |
| 152 | S&F in repair 15 mm bore stop valve (or angle valve) fancy type chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends complete all as specified and directed. |
| 153 | S&F in replacement 32 mm bore waste coupling of PTMT (half or full threaded) with minimum weight 45 gms complete all as specified and as directed. |
| 154 | S&F in replacement chromium plated grating 125mm dia circular, fixing with cement mortar 1:3 on Nahani or floor trap complete all as specified and directed. |
| 155 | S&F in repairs vitreous china ware squatting pan ‘Orissa’ pattern size 580x440mm white with integral foot rest including connection to trap and flushing pipe, anti-syphonage pipe etc and making good to floor etc complete all as specified and as directed. |
| 156 | S&F in repair vitreous china wash hand basin, white, flat back size 550mmx400mm including cast iron or mild steel brackets including cutting for and pinning in brackets complete all as specified and as directed. |
| 157 | Material and labour for 25mm stainless steel pipe curtain rod, fixed with & including Stainless steel bright hooks/ brackets and stainlesss steel bright finish finials (at both side), complete all as specified includng fixing of long size rawl plugs in wall for SS hook including dismantling the old curtain rods (any type) complete all as specified and directed. |
| 158 | S&F in repair 10 litres capacity PVC valve less symphonic action type, flushing cistern, low level, white with inlet, ball valve, PVC flush pipe, float and handle including brackets complete all as specified. |
| 159 | S&F solid PVC door frame of size 50x47 mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube complete all as specified. |
| 160 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. |
| 161 | Dismantling wrought iron or mild steel work of any description not otherwise provided all as specified. |
| 162 | S&F for ornamental and intricate designFramed work such as gates, grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290 Gde-E-165 complete all as specified and directed. |
| 163 | Material and labour for Granite (of any type) work 20mm thick machine cut (table rubbed and polished) in steps jambs, pillars, window cills, cooking platforms, shelves in cupboard, handwash places and like including necessary cutting and grooving to walls and making good including 10mm thick in cement mortar (1:3) screed bed or bedding layer and pointing with cement mortar (1:2) with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 164 | S&F 2 mm thick Fibre glass reinforced translucent sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. |
| 165 | M&L for preparing new plastered or unplastered wall surfaces and applied two coat of cement base paint over one priming coat complete all as specified and directed. |
| 166 | M&L for prepration of old decorated surfaces of walls and applying one coat of cement base paint complete all as specified and directed. |
| 167 | M&L for prepration of old decorated surfaces of walls incl, scraping down smoke soot, moulds, moss & efflorescent salts & trading oil and greesing spots etc & applying one coats of exterior emulsion paint all as specified and directed. |
| 168 | S&F 35 mm thick ( measured solid) precast cement concrete (1:2:4) type B-0 ( using 12.5) mm graded stone aggregate) as in louvers or jallies set in cement mortar (1:4) including all necessary from work and reinforcement & dismantling the existing jalli of any description & any description complete all as specified and directed. |
| 169 | Demolition of cement concrete (unreinforced) in concrete of any description and in any position not otherwise specifically provided for all as specified and directed. |
| 170 | Material & Labour for 50 mm thick PCC type C-2, 1:3:6 (using 40 mm graded aggregate), as in plinth protection incl necessary form work etc complete all as specified and directed. |
| 171 | M&L for 25 mm thiick PCC (1:2:4) type B0 (Using 12.50 mm graded stone aggregate), as in levelling and wearing coarse and finishing the surface even and smooth without using extra cement. |
| 172 | Rolled sections as in Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections Fe 410-W (Gde E- 250)quality complete all as specified and directed. |
| 173 | M&L Cutting holes of superfacial area exc150 Sqcm but n.exc 400 Sqcm into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required. |
| 174 | Taking down carefully aluminium / copper point wiring (light / fan / socket or power) while not disturbing existing conduit complete including fitting such as switches, ceiling roses, socket, light fittings, regulators etc complete and making good disturbed surfaces of walls and floors and one coat of putty and two coat of distemper as per existing colour complete all as directed . |
| 175 | Taking down sub main wiring of two single core PVC cable PVC insulated 4 sqmm including conduit or wooden batten and remove from the site of work and making good the disturbed surfaces of wall or floor etc. and one coat of putty and two coat of distemper as per existing colour complete all as directed. |
| 176 | M&L for point wiring with 1.5 sqmm, PVC insulated but sheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit medium grade 20mm dia (minimum) or higher size as specified and cutting chasing on wall complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc/ fittings ISI marked for modular fittings and brass screws and cup washers including 1.5 sqmm stranded copper conductor PVC insulated FRLS cable green in colour as continuous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed. Note : Cost of Metal boxes and modular accessories like cover plates will be paid seprately in respective items)(a) Fan point/ exhaust fan point / one light point / bell/ buzzer controlled by one switch/ bell push. |
| 177 | b) As per Ser item No -176 above but for 5 amps socket on independent board. |
| 178 | c) All as per Ser item No- 176 above but for 5 amps socket on same board. |
| 179 | All as Ser item 176 here in before but with 2.5 sq mm wire and earth wire (green colour) of 2.5 sq mm for 3 Pin 15 Amp modular type socket outlet. |
| 180 | All as Ser item 176 here in before but with 4 sq mm wire and earth wire (green colour) of 4 sq mm for 3 Pin 15 Amp modular type socket outlet/AC Plug complete all. |
| 181 | Supply and fixing modular metal flush box 4 module complete all as specified and directed. |
| 182 | Supply and fixing modular metal flush box 6 module complete all as specified and directed. |
| 183 | Supply and fixing modular white cover plate with frame, 4 module complete all as specified and directed. |
| 184 | Supply and fixing modular white cover plate with frame, 6 module complete all as specified and directed. |
| 185 | Supply and fixing modular Dummy plate complete all as specified and directed. |
| 186 | Supply and fix in repair Modular switch 6 Amps single pole one way as per existing make & model/ as per sample . |
| 187 | Supply and fix in repair Modular switch 16 Amps single pole one way as per existing make & model/ as per sample . . |
| 188 | Supply and fix in repair Modular socket 6A /16 A Twin socket heavy duty as per existing make & model/ as per sample . |
| 189 | Supply & fixing ceiling roses surfaces bakelite two three terminals 65 x 50 mm all as specified. |
| 190 | Supply and Fixed single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of cap 20A complete all as specified and directed. |
| 191 | Supply & fixing of 20 Watt Batten luminaire with Polycarbonate Housing with high quality opal finish diffuser. The luminaire should have a CRI > 80 and CCT of 6500K. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire shall be designed to emit at least 2000 nominal lumens and an System efficacy of at least 100 lumen/watt and maximum system wattage of 20 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor >0.95 and THD <10% and suitable for an operating voltage range of 140-270V AC. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. |
| 192 | Supply and fixing of electric water heater,storage type steel body with SS 304 inner tank and heating element upto2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. |
| 193 | Supply and fix in replacement PVC Exhaust fans AC single phase 230/ 240 V of size 230 mm sweep as required for fixing and electrical connection upto ceiling rose incl cutting holes if any complete all as specified and directed. |
| 194 | M&L for submain wiring with two RUNS of single core 4 sqmm for main wire and one run of single core 4 sqmm as earth wire of stranded FRLS copper conductor PVC insulated unsheathed cables drawn through and including concealed conduits in wall and necessary cutting and chassing for rigid PVC conduit ISI marked not less than 20 mm dia and all accessories complete all as specified & directed. |
| 195 | M&L for earthing complete with GI steel earth plate electrod 60x60cmx6.00mm thick bouried directly in ground /earth pit not less than 2.25m deep below the ground level with top edge of the plate not less than 1.5 m below the normal ground level connected to test point by using GI wire of dia 4 mm as earthing lead soldering/revated to earth plate at one end and connected DB by means of nut, bolts etc complete with PCC pit (1:3:6) type GI cover with handle funnel with watering pipe wire mess GI protection pipe for earthing lead all complete as specified and as per electric plate No.5 of SSR Part I. |
| 196 | Taking down unserviceable Cable of any size as directed. |
| 197 | Supply and laying XLPE insulated , armoured electric cable heavy duty with aluminium conductor , 1100 volts UG cable of size 3.5 Core 35 Sqm. |
| 198 | Excavation in trenches in soft/lose soil not exceeding 1.5 Mtr wide and not exc 1.5M depth for laying of UG cables and getting out all as specified and directed. |
| 199 | Returning, filling, including spreading, levelling, watering and well ramming in layers not exc 25cms thick of soil complete all as specified and directed. |
| 200 | M&L river sand in trenches as cable cushioning 8 cm below the cables and 15cm above the cable which is to be punned down to 10m all as specified and directed.only punned thickness will be measured. |
| 201 | Removing the surplus excavated materisl/soil to a distance not exc 50Mtrs and depositing, where directed at a level not exceeding 1.5 Mtr above the starting point all as specified and directed. |
| 202 | Supply and lay burnt bricks sub class 'B' standard size laid across the cable in trenches as protection to the cable all as specified and directed. |
| 203 | Supply and fixing /laying PVC conduit pipe 50 mm bore light grade fixed to pole with clamps nuts, Bend/Tee/Junction box , bolts and washers or laid under road crossing or fixed to wall complete all as specified and directed. |
| 204 | Taking down Service cable wiring of two single core PVC cable PVC insulated 4 / 6 /10 sqmm including conduit or wooden batten and remove from the site of work and making good the disturbed surfaces of wall or floor etc. as directed. |
| 205 | Taking down main switch / DB and making good the disturbed surface as directed. |
| 206 | Supply & fixing switch piano flush type single pole one way 5 Amps all as specified. |
| 207 | Supply & fixing switch piano flush type single pole 15 Amps. |
| 208 | Supply & fixing socket outlet 5 Amp flush button type all as specified. |
| 209 | All as per item 208 here-in-before but 6 pin 5/15 Amps multi type. |
| 210 | Supply & fixing lamp holder PVC, insulated body with back plate suitable for batten fittings including LED lamp 9W all as specified. |
| 211 | Supply & fixing bell electric (dingdong) 230 volt, SP. |
| 212 | Supply and fix ceiling fan regulator Electronic rotary Step type single phase A/C 230 volts all complete as specified and directed. |
| 213 | S&F surface mounted LED Battern with LED tube rod 2 Feet 10W internal surge protection device of 4 KV with voltage band 140-280V and making electrical connection to ceiling rose all as directed. |
| 214 | Supply & fixing of 14 Watt Batten luminaire with Polycarbonate Housing with high quality extruded polycarbonate diffuser. The luminaire should have a CRI > 80 and CCT of 6500K. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire shall be designed to emit at least 2100 nominal lumens and an outstanding System efficacy of at least 150 lumen/watt and maximum system wattage of 14 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor >0.95 and THD <15% and suitable for an operating voltage range of 140-270V AC. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. |
| 215 | S&F LED bulb 9 Watt White(6000K-6500 K)/Warm(2700K-3200K) with BEE Energy star rating of five star and emission of minimum 100 lm/W complete all as specified. |
| 216 | S&F SITC of high-quality integrated LED Street Light with a minimum system lumen of4750 Lm and system wattage not exceeding 45W with a nominal efficiency 105 lumen/watt. CCT of 5700K with SDCM of < 5 and CRI >70. The housing should be of non-corrosive high-pressure die-cast aluminum with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with PF > 0.95. Lifetime of 50K hours @L70. The Luminaire should have Powered by integral, Isolated LED electronic driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Phase to Phase protection (Operation at 440 V AC), Over Voltage protection, Surge Voltage protection upto 4 kV.Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/ULaccredited lab to verify above parameters complete all as specified and directed. |
| 217 | Supply and fixing of new generation, post top, energy saving spun aluminium landscape luminaries with high power 40W LED , IP65 protection suitable for Pole dia 76mm pole complete with all accessories. Luminaire shall be made of pressure die cast/spun aluminium housing with high transmission clear diffuser, corrosion resistant powder coated finish, high efficiency LED driver with surge protection, minimum system efficacy 100 lm.W, CCT 3000K/4000K/6500k, CRI > 80, operating voltage 140-270 V AC complete all as directed by EIC. |
| 218 | Supply & Fixing MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type ,MCB should be having the Breaking Capacity of 10 kA and should be ISI marked as per IS/IEC 60898-1 2002 with “B” Curve Characteristics. Should have bi-connect terminals on the bottom terminals for looping and should have 35 sq mm termination capacity on both terminals with insulated sliding shutters for making it IP-20 protected & with two position DIN Rail Clamp for easy mounting. complete all as specified and directed. |
| 219 | S&F MCB SPN, 240 volts, 40 to 63 Ampere, rupturing capacity 10 KA, ‘B’ curve type ,MCB should be having the Breaking Capacity of 10 kA and should be ISI marked as per IS/IEC 60898-1 2002 with “B” Curve Characteristics. Should have bi-connect terminals on the bottom terminals for looping and should have 35 sq mm termination capacity on both terminals with insulated sliding shutters for making it IP-20 protected & with two position DIN Rail Clamp for easy mounting. complete all as specified and directed. |
| 220 | Supply and fix Sheet metal DB,double door, SPN 8 way for MCB, 240 volt with 200 amps rated bus bar , neutral bar / connectors suitable copper thimbles , lugs etc. Distribution boards should be Double Door design with IP-43 and IK-08 rating as per IEC 61439-3 with 100 Amp fully insulated copper busbars, insulated neutral bar, earth bar and cable ties for cable management. Distribution board should be supplied with door earthing, prefitted masking sheet, reversible doors and pan assembly for easy installation. Must have possibility of converting lock to panel lock complete all as specified and directed. |
| 221 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circulat of size 10 Sqmm 2 Core complete. |
| 222 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circulat of size 6 Sqmm 2 Core complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender