Tender For special Repair To Single Offrs Accn Rt-110 And T-111 And Bldg No Te-289 At Mh Of Age B/R And Age E/M Under Ge Tenga
Tender Value
35.20 Lakhs
Estimated cost
Bid Submission
21 Aug 2026
4 days left
EMD
70400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kameng → Arunachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Single Offrs Accn Rt-110 And T-111 And Bldg No Te-289 At Mh Of Age B/R And Age E/M Under Ge Tenga
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) all as spd. |
| 2 | Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) all as spd. |
| 3 | Taking down shutters of any description n. exc 1 Sqm each including refixing in same opening after easing and adjusting complete all as specified. |
| 4 | Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each including refixing in same opening after easing and adjusting complete all as specified. |
| 5 | Taking down MS shutters of any description n. exc 1 Sqm each including welding refixing in same opening after easing and adjusting complete all as specified. |
| 6 | Taking down MS shutters of any description exc 1 Sqm and n exc 2 Sqm each including welding refixing in same opening after easing and adjusting complete all as specified. |
| 7 | S & F 2nd class hard wood plain solid straight chowkats and frame of wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 8 | S&F mild steel work, Grade Fe-410-0 or Fe- 310-0, as in flat iron (for holdfast) complete all as specified and as directed. |
| 9 | S&F for 35mm thick, 2nd class hard wood plain framed, panelled shutters (two panel only) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated fitted to chowkats all as specified and directed |
| 10 | S & F 2nd class hard wood plain framed panelled shutter 35mm thick (any number of panels) with panels of timber flat on both sides, feather edged or of veneered particle board medium density, wood particle board with commercial face veneer 30mm thick complete all as specified and as directed. |
| 11 | S&F for 2nd class hard wood 35mm thick glazed and skeleton door shutters factory made, open rebated and prepared to receive glass or gauge etc with rounded, chamfered or mitred sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per clause 8.24 (a) of SSR Part-I 2009 (Larger size to be provided) complete all as specified and directed |
| 12 | S & F for glazed and Skelton shutters 30mm thick of 2nd class hardwood,open rebated and prepared to receive glass, guaze etc (Without Sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc;sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); suppplied and fitted to chowkats. |
| 13 | S&F 30 mm thick second class hard wood Glazed and skeleton shutters for window and ventilators etc, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (b) |
| 14 | S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet used instead f plain colour PVC sheet & edges will be painted to matc wit printed sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed. |
| 15 | S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet s for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling ofwood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 5mm thick & 15 mm wide PVC sheet beading unsed inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree), and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 16 | S&F for 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed |
| 17 | S&F for 75 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed |
| 18 | S & F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed |
| 19 | S&F for aluminium anodized barrel tower bolts 100 mm of extruded section and fixed complete all as specified and directed. |
| 20 | S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed. |
| 21 | S&F for aluminium handles, cast type, anodised Size of handle in 125mm complete all as specified and directed. |
| 22 | S&F for aluminium handles, cast type, anodised Size of handle in 150mm complete all as specified and directed. |
| 23 | S & F 100mm size extruded aluminium alloy handles, fabricated type anodised |
| 24 | S & F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire staples all as specified & directed. |
| 25 | M&L for 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified |
| 26 | M&L for preparation of new steel surfaces / MS sheet of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer all as specified and directed. |
| 27 | M&L for preparation of old steel surfaces / MS sheet of any description over 10 cm width or girth and applying two coats of synthetic enameled paint all as specified and directed. |
| 28 | M&L in repair second class hard-wood in scantlings clean sawn timber framed and fixed complete all as specified and as directed. |
| 29 | M&L in repair second class hard-wood plain fillets exc 13 and n exc 25 sq cm square, rectangular or triangular in section, clean sawn, secured with nails or breads. |
| 30 | M & L preparation of new wood/plywood or wood / plywood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 31 | M & L preparation of Old wood/plywood or wood / plywood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint all as spfd. |
| 32 | Excavation in trenches in any type of soil not exc 1.5 mtrs wide and not exc 1.5 mtr in depth for Manholes and laying of pipe/ cables/ poles etc and getting out complete all as specified and as directed. |
| 33 | Returning filling in including spreading, levelling,watering and well ramming in layers not exceeding 25cm thick. |
| 34 | Removal of surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding and depositing where directed at a level not exceeding 1.5m above the starting point and disposal. |
| 35 | M & L for PCC 1:3:6 type D-2 (using 40mm graded stone aggregate) as in foundation filling or mass concrete, complete all as specified and directed. |
| 36 | Dismantling structural steel work including doors, gates but excluding framed truss etc.complete all as specified and directed. |
| 37 | S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. |
| 38 | S & F in mild steel work conforming to Fe 290 Gde-E-165 in posts, wall & struts angle including cutting top to shape as directed, drilling holes, notching for wire, etc; flat iron fillets ( for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete all as specified & directed. |
| 39 | Dismantling timber scantlings 40sq. cm and over in section, in any position complete all as specified and directed. |
| 40 | Dismantling to plain or corrugated MS sheet any gauge, thickness including nainital or similar pattern as in roof covering complete all as specified and directed. |
| 41 | S&F 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws etc complete all as specified and directed. (Note:- Item rate shall be include any height of Bldgs / Hangers for scaffolding as all arrangement.) |
| 42 | S&F 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in valley gutter, ridge hips etc. fixed with self tapping screws etc complete all as specified and directed. (Note:- Item rate shall be include any height of Bldgs / Hangers for scaffolding as all arrangement.) |
| 43 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) all as directed. |
| 44 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises and removing the debris outside from defence land complete all as specified and directed . |
| 45 | Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc and brusing neat cement slurry with 3.00 kg per sqm all as spd & directed. |
| 46 | M&L for 75 mm thk PCC 1:4:8 type D-2 as in subbase to flooring complete all as specified and as diretcted. |
| 47 | M&L for 25 mm thick PCC 1:2:4, type B-1 (20 mm graded aggregate) in flooring cmplete all as specified and directed. |
| 48 | S&F for non skid coloured Ceramic tiles 07-08 mm thick (square/ rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 49 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in coloured cement over and including 15mm thick screed bed in CM 1:4 in floors, rendering 10mm thick in CM 1:3 for skirting complete all as specified and directed. |
| 50 | M&L glazed ceramic coloured tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:3) and finished rough complete all as specified and directed. |
| 51 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. |
| 52 | M&L 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs pillars, window cills ,cooking platform and like including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade or granite over including 15mm thick screed bed or bedding layer in cement mortar 1:6 etc complete all as specified and directed.Note:- The stone slab shall be in one piece over kitchen plateform,window cill and making gas pipe holes 25mm dia with rounded holes and all open edges to be half rounded. |
| 53 | M&L for hard core of gauge n exc 63mm broken stone boulders, deposited,spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface etc complete all as spd. |
| 54 | M&L for cement concrete type C-2,1:3:6 (using 40mm graded agg) as in plinth protection and paving 75mm thick laid in slope finished even and fair without using extra cement incl making joints every 2.5m and corner filled with bitumen 85/25 complete all as specified. |
| 55 | Demolition of brick work, built in cement mortar or cement lime mortar including all quions, arches, pillars, etc including demolition of precast rcc articles and disposal of debris out of MoD land complete all as specified and directed. |
| 56 | M&L for PCC 1:3:6 type C-1(20 mm graded aggregate) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete. |
| 57 | M&L Brick work with fly ash bricks old Size bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:6) all as spd and directed |
| 58 | M&L Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) in two layers (5mm finishing layer over 10mm base layer) finished even and smooth without using extra cement complete all as specified and directed |
| 59 | M&L PCC 1:3:6 type C-1 (using 20mm graded aggr) as in surface channels & drains,benching of manholes complete allas spd and directed. |
| 60 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stop ends etc. |
| 61 | Material and labour for complete removal of existing treatment surface externally of wall and applying Two or more coats of 100% Premium acrylic emulsion paint (Weather coat) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm (weather proof/weather coat) without any brush marks on the surface in any colour over including necessary scaffolding up to three storeys height of bldgs,Shade/colour shall be approved by GE,all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and as directed. |
| 62 | Material and labour for preparation of newly plastered external surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint (Weather coat) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm (weather proof/weather coat) without any brush marks on the surface in any colour over including necessary scaffolding up to three storeys height of bldgs,Shade/colour shall be approved by GE,all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and as directed. |
| 63 | M&L Preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and two coats of distemper oil emulsion over a coat of primer of new surfaces complete all as specified and directed |
| 64 | M&L Preparation of old surface complete removal of existing treatment and applying 2mm thick wall care putty over one coat of primer and making the surface smooth and two coats of Oil bound distemper on old surface of wall surface complete all as spd and directed.(old portion) |
| 65 | Demolition of reinforced cement concrete (Reinforcement cut as required to facilitate demolitions) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 66 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and bindingwith and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 67 | M&L for Reinforced cement concrete Type B1, 1:2:4 (Nominal Mix) (20 mm graded agreggate) slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 68 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 69 | S&F in repair Viterous China wash basin, white, flat back, size 550x400mm excluding taps etc but including brackets,including cutting for and pinning in ends of brackets or erecting stand but including waste coupling of fixing of supply and waste pipe complete all as specfied and as directed. |
| 70 | S&F in repair Brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore complete all as specified and as directed |
| 71 | S&F in repair for 600 mm x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as spd. |
| 72 | S&F in repairs 15mm bore brass Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange mixing hot and cold water, screwd down for 15mm dia iron pipe complete all as specified and as directed . Note:- Hand shower & over head shower will be measured and paid separately. |
| 73 | S&F in repair Vitreous China wash down water closet pan including P or S trap of bore 125/110 mm (pedestal pattern), white or in matching colour of tiles (excluding flushing cistern and flush pipe) including plastic water closet seat, white or in matching colour , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and wash down water closet complete all as specified and as directed. |
| 74 | S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets ,fush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specfied and as directed. |
| 75 | S&F in repair 15mm dia 600 mm long PVC connection including brass check nut at both ends screwed both end for iron pipes. |
| 76 | S & F in repair 32/40 mm bore PVC waste pipe flexible with minimum length 800mm complete all as specified and directed. |
| 77 | S&F in repair plate rack made of stainless steel 0.50mm thick, over all size 762mm(H) x 787mm(W) x 254mm(D) complete all as specified and as directed. |
| 78 | S&F in repair cromium plated sink mixer table mounted with 450 mm long braided hoses screwed down for 15 mm bore iron pipe complete all as specified and directed. |
| 79 | S&F for sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 x 460mm bowl size 410mm x 330mm x 160mm complete all as spd & directed. |
| 80 | S&F for rotational moulded polyethlene water storage tanks three layers of 1000 ltrs capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including Dismantling of old brocken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed. |
| 81 | S & F in repairs 75mm / 110mm PVC floor trap, ISI marked with CP grating with/without waste pipe hole incl jointing to waste pipe fixed with solvent cement complete all as specified and as directed. |
| 82 | Demolition and breaking up drain pipes (Salt glazed ware, PVC/AC or Reinforced concrete) set in cement mortar,and taking out of trenches, if required, Internal dia of pipe in 75MM/100mm |
| 83 | S&F for PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors all as specified and directed. |
| 84 | S&F for PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors all as specified and directed. |
| 85 | S&F in repair PVC vent cowl for 110 mm dia all as directed by Engr-in-charge. |
| 86 | Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia all as specified and directed. |
| 87 | Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 20mm bore dia all as specified and directed. |
| 88 | S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed including concealed pipe to walls, floor, ceiling etc complete all as specified. |
| 89 | Refixing of old steel tubing 15 mm medium grade galvanized ISI marked with all fittings short pieces and fixed including concealed pipe to walls, floor, ceiling etc complete all as specified |
| 90 | S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed including concealed pipe to walls, floor, ceiling etc complete all as specified. |
| 91 | Refixing of old steel tubing 20 mm medium grade galvanized ISI marked with all fittings short pieces and fixed including concealed pipe to walls, floor, ceiling etc completec all as specified |
| 92 | M&L for Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed. |
| 93 | S&F in repair Toilet paper holder with flat recessed type stainless steel fixed to walls with chromium plated (CP) brass screwscomplete all as specified and directed. |
| 94 | S&F in repair CP towel ring 20mm dia, fancy type, superior quality, fixed with and including chromium plated screws and wooden/plastic cleats complete all as specified and directed. |
| 95 | S&F in repair PVC Coloured bathroom cabinet looking mirror divided into shelf overall size 432mm x 311mm complete all as specified and as directed by Engr-in-Charge. |
| 96 | S&F in repair PVC coated 25mm dia mild steel chromium plated curtain rod of medium weight and including fixing brackets, finals and decorative end supports etc complete all as directed. |
| 97 | S&F in repair CP towel rail 20mm dia D type 600 mm long complete all as specified and directed. |
| 98 | S&F in repairs soap dish of approximatebsize 160x160mmx40mm, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 99 | S&F in repair Stop valve/ Angle valve cast copper alloy (ISI Marked) fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia, in reapirs complete all as specified and directed. |
| 100 | S&F in repair Stop valve concealed cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia in repair, complete all as specified and directed. |
| 101 | S&F in repair CP Bib taps for 15 mm bore pipe, cast copper alloy screwed down crutch butterfly handle with brass furrelo fixed in repairs complete all as spd and directed. |
| 102 | S&F in repair Gun-metal, globe or gate valves 25mm bore, with iron wheel head, screwed both end for iron pipe |
| 103 | S&Fin repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe |
| 104 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 105 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets |
| 106 | M&L for Plywood 9mm, grade BWR,type BB, fixed with screws to timber frame work fixed in repair complete. |
| 107 | Supply and fix 600mmx600mmx4mm thick ‘E’ Board Classic as in false ceiling including supply and fixing GI ‘Tee” grid frame work made of special section of M.S galvanized sheet 0.30mm thick , bottom portion painted with cellular nitro painting, warping the suspending wire around the existing wooden/steel purlin /rafter for suspending grid frame work of size 605mmx605mm suspended with 4 mm dia GI wire @ 1200mm c/c on main Tee and fixed to T-grid with the help of level clip or as per manufacturer direction. The section consisting of main Tee 37mmx24mmx0.60mm, cross runner tee 37mmx24mmx0.60mm and perimeter angle of 24mmx24mmx0.50mm thick. Perimeter angle to be fixed to wall with GI screw of 40mm long @ 450 mm c/c along the perimeter of wall including applying two coats of distemper oil emulsion complete all as specified and directed |
| 108 | M & L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete, cpmplete all specified and directed. |
| 109 | S&F pre coated mild steel floor door stopper ,tongue anodized 140mm length including vulcanised rubber piece |
| 110 | S & F GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm etc all as specified. |
| 111 | S&F in repair 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed (Helical door closer). |
| 112 | M & L 10 mm thick rendering in cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement |
| 113 | M & L for 15 mm thick plaster in cement mortar 1:4 on brick or concrete surfaces finished even & smooth without using extra cement |
| 114 | Material and labour for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whitening primer. |
| 115 | Material and labour Preparing newly plastered wall surfaces and applying Two coats of cement base paint on wall surfaces over one coat of alkali resistance primer |
| 116 | M&L for 20 mm thick screed bed in CM 1:4 for laying floor tiles. |
| 117 | M&L for Granite 20mm thick(of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite |
| 118 | Dismantling wrought iron or mild steel work of any description not otherwise provided for as specified & directed. |
| 119 | M&L for Steel work in tubular trusses including special shaped washer etc. complete usingERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 as specified & directed. |
| 120 | Material & Labour for light Point wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (FRLSH)single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. |
| 121 | All as per item No. 120 One bell/buzzer point controlled by one bell push complete all as specified and as directed . |
| 122 | All as per item No. 120 here in before One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5sq. mm size |
| 123 | All as per item No. 120 here in before but for one 3 pin socket outlet 5 Amps three pin controlled by one switch on independent board complete all as specified directed. |
| 124 | All as per item No. 120 here in before but for one 5 pin socket outlet 15 Amp and 5 Amp Multipurpose independent using 2.5 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 2.5 sqmm copper (multistrand) PVC insulated and unsheathed earth wire with terminal box of size 175mm x 100mm x 3.15mm complete all as specified. |
| 125 | M&L for Point wiring for one socket outlet 15 Amp on independent board with 4 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (FRLSH)single core multi-stranded copper conductor cable of size 4 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. (For Geyser ) |
| 126 | S&F Socket outlet 2 in 1, 3 pin, 5 amp flush type |
| 127 | S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type |
| 128 | Supply & fixing switch piano flush type (ISI marked), single pole, one way 15 Amp, 240 Volts complete all as specified & directed. |
| 129 | Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed. |
| 130 | Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed. |
| 131 | S&F bell/buzzer push 5/6 Amp,flush type complete all as specified & as directed. |
| 132 | S&F call bell ding dong electric AC, 240 volt, 50 HZ, surface type complete all as specified & as directed. |
| 133 | Supply and fixing lamp holder, insuleted body with pack plate suitable batten fitting on wall duly grouted/fixed in solid block wall or on wooden board complete all as specified and directed. |
| 134 | S&F LED lamp 9/10 Watt, CDL, B-22 cap, (Pin type), 230W, PF not less tha 0.85 (min). |
| 135 | Supply and fixing LED light fitting 1 x 20 Watt 220 volt AC decorative box type with driver, holder including LED tub light connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as directed. |
| 136 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete |
| 137 | S&F of new generation energy saving and environmental friendly long life LED building security light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 35 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from ceiling rose to light length as required at site,GI bracket 32 mm dia pipe and 02 numbers of clamps, all fixing arrangements such as fastners, bolts, nuts washers etc all as specified and directed. |
| 138 | S&F LED bulkhead fitting 10 watt (Endura Ruby) with all accessories and including connenting up with twin core twisted with flexible copper conductor cable with suitable size of 230 volts , 50 hz complete all as spicified and directed. |
| 139 | Supply and fix sheet metal enclosures for DBs Double Door when MCBs to be used 230 volts 8 way 200 Amp rated busbar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board. |
| 140 | S&F MCB SPN having braking capacity 10KA, 32 Amps, 240 V complete all as specified and directed. |
| 141 | S&F MCB SP having braking capacity 10KA, 6 to 32 Amps, 240 V complete all as specified and directed. |
| 142 | S & F exhaust fan sweep 300 mm voltage 230 V 50 Hz 1200 RPM noiseless metal body light-weight rust proof body self closing louvers and blades complete all as specified and as directed. |
| 143 | Supply and fix in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm |
| 144 | Supply and fix electronic meters temper proof LCD display with polycarbonate cover 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH |
| 145 | Supply and fix electric water heater(Geyser), storage type steel body with copper inner tank and heating element up to 2 KW capacity 25 litre, BEE 5 star rated adjustable temprature setting 0-90 degree C complete with accessories such as safety wall, thermostate, NRV indication lamps, inlet outlet connections,air vent connections, connection pieces including all fixing arrangements such as fastners, bilts, nuts washers etc including making good disturbed wall surfaces matching with the existing surface and finishing complete all as specified and directed by Engr in charge |
| 146 | S&F Stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of size 15 mm. |
| 147 | S&F Bib tap cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified & as directed by engr-in-charge. |
| 148 | M & L for PVC connections 15mm size with PTMT nuts of length 450mm for hot and cold water connection complete |
| 149 | S & F incl leakage testing galvanised steel water tubing medium grade 15 mm dia bore with all fittings such as bends, elbow, socket, reducer etc, laid under floor / trenches all as specified & directed. |
| 150 | Supplying, laying, jointing & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100 volts grade, of size 25 sqmm 4 core as per IS 7098 Pt-II laid in trenches / ducts / encased in GI pipe / fixed to pole complete all as directed and specified. |
| 151 | M & L for laying of fine, clean sand (river sand) free from sharp materials and stone particals in trenches for cushioning of cable 8 cm thick under cable and 15 cm thick over the cable including gently punning complete all as specified and directed. Note:- The total thickness of sand shall be measured 18 cm after punning. |
| 152 | Supply and laying un-reinforced precast.concrete cable protection cover of class LV, type-1, flat size 250mm x 150mm x 40 mm, factory made of specified make , complete all as specified and directed. |
| 153 | Supply and laying galvanised tube light grade ISI marked of size 40 mm dia incl all fittings in trenches/fixed on pole/wall/floor or laid in position complete all as specified and directed. |
| 154 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge. |
| 155 | S&F wire for circuit/sub main wiring with 1100 volts grade double core PVC insulated and unsheathed cable with multistranded copper conductor 6 Sqmm, on surface or recessed or drawn in PVC casing capping/PVC Pipe along with 6 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed.(Note: One RM PVC casing capping/PVC conduit ,one run of 6 sqmm earth wire and 2 Run of 6 sqmm cable shall be measured as one run.) |
| 156 | Taking down point wiring carefully copper/ aluminum (light,fan, socket or power) complete (fittings such as switches ceiling rose, pendents, regulators, sockets etc) |
| 157 | Taking down main switches, DBs alongwith existing board and removing the same from the site and making good the disturb surfaces / Portion of the wall etc all specified and directed by EIC. |
| 158 | Taking down sub main wiring of any type and size and discription incl removal from DBs etc and removal of the same from site and making good the disturb surfaces or portion of wall/ceiling etc complete all as specified and directed by EIC. |
| 159 | Supply and laying double wall corrugated HDPE Duct pipe 80 mm outer dia confirming to IS : 14930 (Part - ii) of Approved colouer with fittings for cable protection complete laid in Trenches of fixed on walls with clamps of suitable size all as specified and directed bt Engr In Cahrge. |
| 160 | Supply and laying testing and cable XLPE insulated screed PVC badedgalvnised steel strip or wire armoured electric power cable (Heavy duty ) with strandered alimunim conductor 1100 volt grade of size 4core 16 Sqmm complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender