Tender For Repair And Re-Surfacing Of Road And Road Furniture At Various Location Under Age B/R-I Of Ge (Af) Adm Area At Af Stn Agra
Tender Value
1.50 Crore
Estimated cost
Bid Submission
29 Aug 2026
28 days left
EMD
2.25 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Re-Surfacing Of Road And Road Furniture At Various Location Under Age B/R-I Of Ge (Af) Adm Area At Af Stn Agra
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) with 4.0% binder content of paving bitumen any penetration VG-30 grade by weight of total mix including cement filler, on surfaces rolled compacted with using 8 to 12 tonne capacity power roller to achieve the required compactness, camber and gradent mixed in hot mix plant using design mix and laid by mechanical paver finisher complete all as specified and directed. |
| 2 | M&L preparing existing black top surface or bituminous macadam surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc on back top / concrete surfaces than applying evenly a priming / tack coat with paving bituminous primer VG-10 penetration over the prepared surface by mechanical sprayer @ 5 Kgs/10 Sqm of surface area complete all as specified and directed. |
| 3 | M&L applying bituminous premix asphaltic Semi-dense concrete (SDAC), 30mm thick (consolidated thickness) with 5.5% binder content of paving bitumen any penetration VG-30 grade by weight of total mix including cement filler, on surfaces rolled compacted with using 8 to 12 tonne capacity power roller to achieve the required compactness, camber and gradent mixed in hot mix plant using design mix and laid by mechanical paver finisher complete all as specified and directed. |
| 4 | M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. |
| 5 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. |
| 6 | Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed |
| 7 | Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. |
| 8 | S&F in rep ABS plastic speed bump/speed breakers in parabolic convex shape and of size 750 mm x 250 mm x 70 mm made out of steady plastic, dovetail interlocking sub units, jointed and fixed to make the bump perfectly uniform, bump made out of precolourd material (black/yellow) and UV stablizers to keep them perfectly colourful, studded with reflectors on either side to make it clearly visible to motorists during night hours complete all as specified and directed. |
| 9 | S&F for road side convex mirror of size 800mm dia(material polycarbonate) mounted on MS pipe of 2.10mtr long and dia of pipe is 80 mm embedded with PCC type B-1,1:2:4 (20mm graded aggregate) including RFR, removal and two coat of synthetic enamel paint over a coat of zinc chrome primer in MS pipe including necessary excavation and earth work in any type of soil for fixing and embeding the delineator on ground with hold fast using PCC (1:2:4) type B1(using 20mm graded stone agregate) (minimum PCC block size 300mmx300mmx300mm) for proper grouting complete. |
| 10 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete of design as approved by GE Complete all as specified and directed & incl demolition of kerb stone. |
| 11 | Preparation of old decorated surface of cement or plastered surfaces, Surfaces of any description over 10cm girth or width, not otherwise described of any description and girth, not otherwise described and applying two coats of Synthetic enamel paint ( glossy type) and colour approved by GE complete all as specified and directed. |
| 12 | Preparation of new or previously untreated surface of cement or plastered surfaces, Surfaces of any description over 10cm girth or width, not otherwise described of any description and girth, not otherwise described and applying two coats of Synthetic enamel paint over a coat of primer. |
| 13 | Excavating in soft/loose soil in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed. |
| 14 | M&L PCC 1:2:4 type B2 using 40 mm graded aggregate as in foundation or fixing sign boards in ground and making good of ground complete all as specified and directed. |
| 15 | S&F in repairs Stainless steel round, rectangular or square tube frame supported/fixed with nut and bolts over round stainless steel tubular legs of 1.6 mm thick with stainless steel bonded clamps, all stainless steel parts should be bright polished confirming to stainless steel grade 304 , imposed on section complete all as specified and directed. |
| 16 | S&F in repairs high intensity reflective sign boards made of hardened ACP sheet of 3 mm thick, revited to frame of round, rectangular or square tube, Sign board should be reflective with HIP sheet and overlay film of White/Red/Yellow colour with computer designed/cut letters, Logo/Symbols, road sign indicators and boarders. Letters size not exceeding 200 mm hight and designed as per board size complete all as specified and directed by Engr-in-Charge. |
| 17 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwisespecifically provided for including removing the rubbish out side defence land complete all as specified and as directed . |
| 18 | M&L for 100 mm cement concrete (1:3:6) (using 40mm graded stone aggregate type) C-2 as in sub base of flooring & incl demolition of cement concrete(unreinforced) of any description complete all as specified and directed by Engr-in-Charge. |
| 19 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 28 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 35 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender