Tender For Special Repairs To 36 X Or Md Accn At Bana Singh Lines Under Ge (North) Ambala Cantt
Tender Value
2.82 Crore
Estimated cost
Bid Submission
26 Aug 2026
25 days left
EMD
3.57 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambala → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To 36 X Or Md Accn At Bana Singh Lines Under Ge (North) Ambala Cantt
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE 'A' PART-I (B/R & PATH WORKS): Dismantling of Brick tiles or terracing tiles, single layer on roofs built in cement mortar complete all as specified and directed. |
| 2 | Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed. |
| 3 | Demolition of cement concrete (unreinforced) of any description and in any position including any type of sunken treatment , roof treatment, PCC padding,lime concrete etc. and Clean up to existing RCC roof by steel wire brushes and surface washed with clean water and complete all as specified and directed.Note: All Demolished material / debries will be taken by the contractor out side of the cantonment without any extra cost to the govt.contractor should quote his rate Keeping this Aspect in mind. |
| 4 | Material and labour for cutting grooves in brick wall, for inserting APP membrane and other works. 75mm wide and 65mm deep and shaping horizontal face of grooves and making good with cement mortar 1:3 or PCC 1:2:4.complete all as specified and directed. |
| 5 | Material and labour for PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in mass concrete over roof as in padding incl cement slurry over old RCC surface, surface fair finished even & smooth without using extra cement.complete all as specified and directed. |
| 6 | Material and labour for,15 mm thick plaster in CM 1:4 over concrete surfaces of roofs finished even and smooth with WPC (WPC will be measuredpaid seperately) as in roof treatment work complete all as specified and directed. |
| 7 | Material and labour for providing and laying at any height 3mm thick APP (atactic polypropylene polymer) modified prefabricated five layer weight not less than 3.00 kg/Sqm water proofing membrane black finish reinforced with non woven polyster matt and consisting of a coat bituminious primer @ 0.40 ltr / Sqm by the same membrane manufactures roof membrane over existing RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :-(a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufactured by the same agency as that of APP membrane with a density 0.87-0.89 Kg/ ltr at 25 degree centigrade on prepared surface.(c) Apply on APP membrane a coat of hot blown bitumen grade 85/25 conforming to IS 702 @ 1.20 Kg per Sqm(d) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.00 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gms/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap.(e) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap.Note:- The work shall be carried out through authorized applicator on approve by GE and necessary stage passing will be followed in each stages of works. |
| 8 | Material and labour for PCC 1:2:4 type B1 (20mm graded aggregate ) as in roof kerb, fillets at junctions between roof and parapet walls, copings rounded or chamfered angles complete all as specified and directed. |
| 9 | Demolition of brick or stone masonary built in cement mortar incl all quoins, arches, pillar etc. complete all as specified and directed. |
| 10 | Material and labour for brick work with sub class 'B' bricks old size, class 7.5 designation, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 11 | Material and labour for brick work with sub class 'B' old size bricks using old servicable bricks including cleaning of old bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 12 | Material and labour for brick work with sub class -B bricks, in half brick thick walls, built in cm 1:4 straight or curved on plan to any radius complete all as specified and directed. |
| 13 | Sunken floor water proofing treatment complete as under, complete all as specified and directed :-(a) Taking down plaster from walls upto 450mm height and scrapping the wall and floor surface with wire brush and cleaning with water and allow to dry.(b) All brick joints and superficial cracks, shall be repaired with polymer modified mortar using URP as admixture @ 10 % of cement content.(c) PCC kerb and padding shall be laid be desired slope using waterproofing compound LW+(payment will be done in concerned items.(d) 15mm thick polymer modified mortar using URP as admixture @ 10% of cement content shall be applied on slop base and vertical surfaces.(e) The surface thus prepared shall be coated with two coats of Dr fixit Hydrochem Super or equivalent in Asian/Pidilite/Birla/Berger.(f) A layer of open woven glass fiber mesh shall be laid over base and vertical surface of sunken area.(g) Rendering 10mm thick using polymer modified mortar shall be done over entire area.(h) Curing the sunken portion with water min 48hrs by ponding.Note:- The work shall be carried out through authorized applicator on approve by GE and necessary stage passing will be followed in each stages of works. |
| 14 | Dismantling floor,hearth or wall tilling including cement mortar bedding (but not backing ),removing serviceable tiles to store and rubbish off premises complete all as specified and directed. |
| 15 | Demolition of plain cement concrete (unreinforced) including any type of flooring any description not exc 15 cm, complete all as specified and directed.. Note: All Demolished material / debries will be taken by the contractor outside of the cantonment without any extra cost to the govt.contractor should quote his rate Keeping this Aspect in mind complete all as specified and directed. |
| 16 | Material and labour for PCC(1:3:6) type C2 using 40mm graded aggregate as in plinth protection of avg 75mm thick and finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 17 | Material and labour for 25 mm thick Cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in sub base of floors, surface fair finished and even and rough to receive floor finishescomplete all as specified and directed. |
| 18 | Material and labour for Non - skid jointfree coloured premium quality Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 19 | Material and labour for non–skid ceramic colour tiles 7 to 8mm thick (square /rectangular) area of each tiles exc 0.11 sqm but n exe 0.18 sqm, in floor etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in cement mortar (1:6) , complete all as specified and directed. |
| 20 | All as per above item no 19 but as in skirting over and including 10 mm thick backing coat with cement mortar 1:4 complete all as specified and as directed . |
| 21 | Material and labour for glazed ceramic coloured premium quality tiles 450x300x7mm thk on vertical surfaces such as dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 22 | Demolition of stone slabs of any description or any thickness laid bedded and pointed in any mortar in floors and walls approns etc. complete all as specified and directed. |
| 23 | Material and labour for Granite (of any type) slab 17-18 mm thick machine cut ,bedded and jointed with gray cement slurry and pointed with white cement as in floors/ cooking plateform, with admixiture of pigment to match the shade of granite stone including grinding and polishing complete over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 24 | Rounding to edges of stone slabs one edge such as in steps & platform etc. complete all as specified and directed. |
| 25 | Material and labour for Machine cut green marble stone slab flooring as in steps, riser, plateform etc 17-18mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 26 | Material and labour for Machine cut green marble stone slab flooring 17-18mm thick as in skirting / dado over and including over and including 10 mm thick rendering in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 27 | Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 28 | Material and labour for reinforced cement concrete 1:2:4 type B0 (using 12.50mm graded stone aggregate) as in slabs, suported on walls, beams and columns in floors, roofs, landings balconies canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 29 | Material and labour for reinforced cement concrete type B1 (1:2:4) (using 20mm graded stone aggregate) as in chajjas,Fins, fascias, louvres, parapets, and railings exc. 60cm in height, newels and the like ccomplete all as specified and directed. |
| 30 | Material and labour for formwork to soffits of suspended slab such as roof slabs, floor slabs, landings and similar work chajjas , fins , louvers and fascia of horizontal or sloping , rough finished flat surfaces complete all as specified and directed. |
| 31 | Material and labour for form work for concrete flats exc 5 cm but n exc 10cm wide rough finished complete all as specified and directed. |
| 32 | Supply and fix for mild steel TMT bars 10mm dia and over, cut to length & bent to shape required including cranking, bending spirally for hoping for column, hooking ends & binding with and including mild steel wire not less than on 0.9mm dia or securing with clips complete all as specified and directed. |
| 33 | Taking down frames with shutters n exc 1.50 Sqm each with shutter without taking off shutters from the frame. complete all as specified and directed. |
| 34 | Taking down frames with shutters exc 1.50 Sqm and n.exe 4 sqm each with shutter without taking off shutters from the frame. complete all as specified and directed. |
| 35 | Supply and fix for framed bracket of angle or Tee with web and flanges cut to shape drilled and countersunk including welding bending ccomplete all as specified and directed. |
| 36 | Supply and fix for of factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames/chowkhat of size 50 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with mild steel hold fast of required dia and length complete all as specified and directed.NOTE : - (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made. (ii) Material manufacture test certificate should be provided before execution of work. |
| 37 | Supply and fix for joint less made of single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws,complete all as specified and directed. |
| 38 | Supply and fix for factory made single extruded WPC (Wood PolymerComposite) solid door/ window/ Ceosetory windows & other frames/chowkhat of size 100 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with mild steel hold fast of required dia and length complete all as specified and directed.NOTE : - (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made.(ii) Material manufacture test certificate should be provided before execution of work. |
| 39 | Supply and fix for factory made single extruded WPC (Wood PolymerComposite) solid door/ window/ Ceosetory windows & other frames/chowkhat of size 125 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with mild steel hold fast of required dia and length complete all as specified and directed.NOTE : - (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made.(ii) Material manufacture test certificate should be provided before execution of work. |
| 40 | Supply and fix for factory made single extruded WPC (Wood Polymer Composite) solid decorative type moulded ( Jointless ) door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with full body threaded star headed counter sunk S.S screws, complete all as per specification & drawing complete all as specified and directed |
| 41 | Supply and fix for factory made single extruded WPC (Wood Polymer Composite) solid decorative type moulded ( Jointless ) gauzed door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with full body threaded star headed counter sunk S.S screws, complete all as per specification & drawing complete all as specified and directed. Note : Stainless steel wire mesh should be paid under separate item . |
| 42 | Supply and fix for bands hold fst etc including welding confirm to fe 290 Gde E 165 complete all as specified and directed. |
| 43 | Material and labour for WPC board 18mm thick (Minimum density 600 kg/Cum) of both side laminated(approved coloured), fixed with stainless steel screws, solvent cement /adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete all as per manufacture's instructions all as specified and directed. |
| 44 | Material and labour for rolled mild steel framed work as in chowkats of door or gates of angle or other section with gusset plates, rails braces etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe-410-W (Grade E-250) quality 'A', complete all as specified and directed.. |
| 45 | Material and labour for 0.80 mm thick mild steel plain black sheeting as in covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed. |
| 46 | Supply and fix for Ball bearing runners 45mm telescopic (KTS–20) full extension load capacity minimum 50Kgs complete all as specified and directed.. Make : HETTICH, KAFF, GLEN, HARRISON and GODREJ. |
| 47 | Supply and fix for ‘D’ type cabinet handles premium quality, stainless steel grade 304, gloss chrome, SN finished 150mm long matt finished complete all as specified and directed. Make: HETTICH, KAFF, GLEN, HARRISON and GODREJ. |
| 48 | Supply and fix for Auto closing hinges of size 35mm of 0 crank (KH–001) of 8 crank (KH–002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed.. Make : HETTICH, KAFF, GLEN, HARRISON and GODREJ. |
| 49 | Supply and fix for magnet catcher fixed in cabinet shutter (one portion) and wooden frame (other portion) with screw complete all as specified and directed. |
| 50 | Supply and fix for Continuous (piano) hinges,stainless steel, bright finish or electrogalvanised width of flap 40mm, complete all as specified and directed. |
| 51 | Supply and fix for 75mm brass handles, cast type, polished bright complete all as specified and as directed by the Engineer-in-Charge |
| 52 | Supply and fix for Stainless steel wire cloth.0.36mm nominal dia of wireand average width of aperture 1.40mm and fixed with stainless steel wire staples complete . |
| 53 | Supply and fix for 100mm Stainless Steel Butt hinge medium weight cold rolled complete all as specified and directed. all as specified and directed |
| 54 | Supply and fix for 150mm long Stainless Steel handles, cast type, anodised complete all as specified and directed. |
| 55 | Supply and fix for mild steel 300mm, ordinary rat tail rod pattern springs, including roller and roller plate including welding or screwing to MS frame complete all as specified and directed. |
| 56 | Supply and fix for 150mm long Stainless Steel barrel tower bolt of extruded section. complete all as specified and directed. |
| 57 | Supply and fix for 200mm long Stainless Steel barrel tower bolt of extruded section complete all as specified and directed. |
| 58 | Supply and fix for 250MM long Stainless Steel sliding door bolt with hasp and staple(bolt type) and fixing clips of sheets cast of excruded section and fixing bolt and sliding complete all as specified and directed. |
| 59 | Supply and fix for floor door stopper of Stainless Steelalloy body and tongue, anodised, with hard drawn steel spring, fixed in floo 150mm long cover plate complete all as specified and directed. |
| 60 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to storecomplete all as specified and directed. |
| 61 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 62 | Material and labour cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed watertubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 63 | Supply and fix for looking mirror of size 600x 450mm bevelled edge mirror of selected quality glass , mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 64 | Supply and fix for in repair Vitreous china orrisa pan squatting pattern 580 X 440mm with integeral foot rests including P or S trap including PVC low level flushing cistern 10 ltrs capacity and Flush pipe of polyethylene of low or high density or PVC. 32 mm dia complete all as specified and directed.Note : The cost of traps , flushing cistern and PVC flush pipes are included in this item. |
| 65 | Supply and fix for in repair vitreous china wash hand basin with pedestal star white size 550mm x 400 mm including CI brackets, PTMT waste coupling,waste pipe 32 mm bore complete all as specified and directed. |
| 66 | Supply and fix for in repair sinks made of stainless steel with drain board 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including providing and fixing cantilever CI brackets , waste pipe , waste coupling and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.Note : (i) The cost of waste coupling , PVC waste pipes are inclusive with this item and nothing extra will be admissible in to this account . |
| 67 | Supply and fix for Chlorinated PVC (CPVC) SDR-11 pipes 16 mm inner dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i.e fixing the pipe with clamps at 1.0 m spacing including jointing of pipe with one step CPVC solvent cement, cutting chases and making good the same and testing of joints complete all as specified and directed. |
| 68 | Supply & fixing for Chlorinated PVC (CPVC) SDR-11pipes 20 mm inner dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings,i.e fixing the pipe with clamps at 1.0 m spacingthis includes jointing of pipe Supply & fixings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete, all as specified and directed. |
| 69 | Supply and fix for in repair fancy type pillar taps of 15 mm dia, cast copper alloy, with capstan heads, with chromium plated, screwed down high pressure with or without lettered 'hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed. complete all as specified and directed. |
| 70 | Supply and fix for in repair 15 mm stop valves/Angle valves but fancy type, chromium plated , cast copper alloy,screwed down,high pressure, with flange cap , screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed. |
| 71 | Supply and fix for in repair 15 mm dia Bib taps, long shank , fancy type cast copper alloy with crutch or butterfly handle, screwed down, crewed with flange cap for iron pipe or for brass ferrule and fixed. complete all as specified and directed. |
| 72 | Supply and fix for in repair Chromium plated square fancy type shower rose 200 mm size with shower arms with or without swivel joints including fixing to pipe or union complete all as specified and directed. |
| 73 | Supply and fix for in repair 15 mm concealed stop valves ,but fancy type, chromium plated , cast copper alloy,screwed down,high pressure, with flange cap , screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 74 | Supply and fix for 15 mm dia 600mm long PVC water connection with brass nuts ( Hot and cold ) and washers complete all as specified and directed. |
| 75 | Supply and fix for CP ( brass body ) Towel Rail 600mm long, D type fixed with and including Chromium plates brass screws and wooden /plastic cleats (minimum weight 170gms ) complete all as specified and directed. |
| 76 | Supply and fix for in repair Stainless steel ( SS 202 grade ) Curtain rod 25 mm dia 0.80 mm wall thickness, mild steel, chromium plated including ornamental type supporitng and end brackets and clamps as per sample complete all specified and directed. |
| 77 | Supply and fix for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as approved Desing complete all as specified and directed. |
| 78 | Material and labour for UPVC (SWR) floor trap plain with CP grating including jointing with solvent cement outlet dia 75 mm in repair. Note : Cost of grating are included in this item. |
| 79 | Supply and fix for Soap dish, stainless steel, approximate size 160x 160x90mm complete all as specified and directed. |
| 80 | Dismantling water tanks capacity Exc 250 ltrs but n exc 500ltr and removing to store complete all as specified and directed. |
| 81 | Supply and fix for 20mm PTMT nipple suitable for HDPE water tank (minimum weight 15 mm-38gms/20mm-45gms/25mm-65gms) complete all as specified and directed. |
| 82 | Supply and fix for ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia of make prayag or equivalent complete all as specified and directed. |
| 83 | Supply and fix for Rotational moulded polyethylene water storage tanks of 500 ltr capacity (cylindrical vertical with closed top)with three layers white colour including hoisted and fixed in position all as specified in SSR Part I. Note : - The colour of tanks shall be white colour including cpvc 20mm gate valvecomplete all as specified and directed. |
| 84 | Materila and labour cutting into existing manhole for connecting into new drain, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section), in cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate, smooth finished and reforming benching as required for 75/110/100 mm bore PVC pipe, complete all as specified and directed. |
| 85 | Excavation in trenches not exc 1.50 mtr wide and n exc 1.50 mm in depth and getting out in soft/ loose soil for shafts, wells, cesspits, manholes, pier holes and NP2 pipes etc,. complete all as specified and directed. |
| 86 | Returning filling in including spreading, levelling, watering and wall ramming in layer n exc not exc 25 cm, any kind of soil complete all as specified and directed. |
| 87 | Removing execavated material n nexc 50m and depositing where directed at a level n exc 1.5m starting point complete all as specified and directed. |
| 88 | Demolition and beaking up drain AC pipes/PVC pipe set in cement mortar 100 mm and below complete all as specified and directed. |
| 89 | Supply and fix for UPVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or laid in floor,wall, trenches , bore of the pipe 110 mm complete all as specified and directed. |
| 90 | Supply and fix for UPVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 75 mm complete all as specified and directed. |
| 91 | Supply and fix for UPVC(SWR) bends 110 mm dia. With access door complete all as specified and directed. |
| 92 | Supply and fix for UPVC(SWR) bends 75 mm dia.with access door complete all as specified and directed. |
| 93 | Supply and fix for UPVC (SWR) junction single, (Single T) equal or unequal with access door 110 mm bore complete all as specified |
| 94 | Material and labour forUPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement including taking down old gully traps of any description complete all as specified . |
| 95 | Supply and fix for UPVC (SWR) vent cowl of 110 mm bore complete all as specified . |
| 96 | Supply and fix for Hard drawn steel wire fabric cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcent Weight per square metre N exc4 Kg complete all as specified and directed |
| 97 | Taking down cement plaster up to any height on brick or stone surfacs including raking out joints hacking for key scrubbing down with water etc. complete all as specified and directed. |
| 98 | Material and labour for rendering 15mm thick in cement plaster 1:4 on any faces of brick work or concrete wall surfaces and finished even and smooth without using extra cement including necessary scaffolding etc. complete all as specified and directed. |
| 99 | Supply only liquid integral water proofing comound ISI marked complete all as specified and directed. |
| 100 | Material and labour for rendering 15mm thick in cement plaster 1:6 on any faces of brick work or concrete wall surfaces and finished even and smooth without using extra cement including necessary scaffolding etc complete all as specified and directed. |
| 101 | Material and labour for rough cast plaster as specified in SSR Part-I, clause 14.22 shall consisting of following:- firstly apply under coat in cement mortar 1:3 not less than 10 mm thick and while still it is in plastic state the rough cast mixture consisting of crushed stone or fine gravel aggregate which is generally of size between 6 to 12 mm depending on texure required mixed with coarse sand and cement in the ratio 1:1:1 shall be applied complete all as specified and directed. |
| 102 | Material and labour for preparation of new plastered surface of applying two coats of acrylic distemper over a coat of alkali resistant primer over two coat of wall care cement based putty over and including preparation of wall surfaces to be applied with Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper/ primer should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. |
| 103 | Material and labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 104 | Material and labour for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 105 | Material and labour for preparation of old decorated brick/concrete, plastered / unplastered surfaces of ceiling by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of white lime wash on prepared surfaces of wall etc., up to height of double storey bldg, complete all as specified and directed. |
| 106 | Material and labour for rendering 5 mm thick on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed. |
| 107 | Material and labour for Preparation of new plastered surface of applying two coats of weather proof exterior emulsion paint over and including priming coat of exterior primer over and including and 2-3mm of wall care putty white cement based putty over and including preparation of surfaces of walls or ceiling and soffits of brick or concrete surfaces to be applied with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI, by allowing 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. |
| 108 | Material and labour for preparation of new plastered surface of applying two coats of weather proof exterior emulsion paint over and including priming coat of exterior primer over and including preparation of surfaces of walls or ceiling and soffits of brick or concrete surfaces to be applied with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI, by allowing 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. |
| 109 | Material and labour for Stainless steel plate rack of size 31\\" x 30\\" x 10\\" of load capacity not less than 30 kg including fixing with stainless stell screws including taking down of old plate rack of any description complete all as directed by Engr in Charge. |
| 110 | Desilting of manhole complete by removing all scum, sludge, silt (both organic and inorganic nature) by manual labour or mechanical scraper and disposal of the same and buried in trenches etc, as in foul condition for any depth complete all as specified and directed.Note:- Sludge, scum, silt (both organic and inorganic nature) water shall be disposed off in closed container at authorized dumping site declared by local administration outside MD land. |
| 111 | Material and labour for preparing old brick/plastered wall surfaces of shaft area and back area of rain water pipes (up to 12.00m high) incl M& L for water proofing by applying two coats of Ultra block 2K chemical of M/s Asian/ equivalent in Pidilite, Berger, Sikka, Birla. The work shall be carried out through authorized applicator on approve by GE and necessary stage passing will be followed in each stages of works. complete all as specified and directed. |
| 112 | Supply and fixing for windows fabricated from Rolled Formed GI Section made of Galvanised steel colour coated(PPGI Sheets) (Base steel as per IS 513 ‘’D’’ quality). Galvanised as per IS 277 with Zinc of 90 Gsm/SqMt w. PAINT: Pre-Painted sections shall be with primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder upto 50-60 microns thick. GI Section of 0.58mm thick in Double rebate windows in which both glazed shutter and flymesh shutter, 75X 58mm outer frame, Mullion 74 x 53mm, Glazed shutter 48 x 22mm, Flymesh 42 x 21mm, Beading for Glass Fixing 12 x 12mm in fixed portion and the outer frame and mullions to have rebate for glazed/gauzed shutters the sections cut to length metre joined with corner Poly Vinyl Chloride brackets centre mullion fixed with Poly Vinyl Chloride Mullion caps. Glass of 4mm thick plain float glass fitted with rubber gasket in glazed shutter and wiremesh of Stainless steel of 36 guage to fix mesh in mesh shutter using VC Gypsum Drywall screws and Spoon profile of 0.58mm GI Sheet. Corners of the windows shall be joined with corner brackets made of polyvinylchloride with CRCA of zinc phosphate coat. Each glazed shutter and fly mesh shutter shall be provided with SS Pivot Hinges 2 in each, PolyVinylChloride handle 1 in each and Powder coated Peg stay in Glass shutter. Window shall be provided with enamel paint MS Grill/Guard Bars made of 10mm horizontal MS Sq Bar welded to 6 x 12mm MS Flat at with holes at both vertical ends. Gap between the bars shall not be more than 152 mm. Window frames shall be fixed to brick / concrete masonry by using nylon self expension caps & 75/100 mm MS screws after drilling in walls. VC Gypsum Drywall screws shall be used while fixng corner brackets, stay, hinges, mullion caps of windows complete all as specified and directed. |
| 113 | Supply and fixing for ventilators fabricated from Rolled Formed GI Section made of Galvanised steel colour coated (PPGI Sheets) (Base steel as per IS 513 ‘’D’’ quality). Galvanised as per IS 277 with Zinc of 90 Gsm/SqMt w. PAINT: Pre-Painted sections shall be with primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder upto 50-60 microns thick. GI Section of 0.58mm thick in Double rebate windows in which both glazed shutter and flymesh shutter, 75X 58mm outer frame, Mullion 74 x 53mm, Glazed shutter 48 x 22mm, Flymesh 42 x 21mm, Beading for Glass Fixing 12 x 12mm in fixed portion and the outer frame and mullions to have rebate for glazed/gauzed shutters the sections cut to length metre joined with corner PolyVinylChloride brackets centre mullion fixed with PolyVinylChloride Mullion caps. Glass of 4mm thick plain float glass fitted with rubber gasket in glazed shutter and wiremesh of Stainless steel of 36 guage to fix mesh in mesh shutter using VC Gypsum Drywall screws and Spoon profile of 0.58mm GI Sheet. Corners of the windows shall be joined with corner brackets made of polyvinylchloride with CRCA of zinc phosphate coat. Each glazed shutter and fly mesh shutter shall be provided with SS Pivot Hinges 2 in each, PolyVinylChloride handle 1 in each and Powder coated Peg stay in Glass shutter. Window shall be provided with enamel paint MS Grill/Guard Bars made of 10mm horizontal MS Sq Bar welded to 6 x 12mm MS Flat at with holes at both vertical ends. Gap between the bars shall not be more than 152 mm . Window frames shall be fixed to brick / concrete masonry by using nylon self expension caps & 75/100 mm MS screws after drilling in walls. VC Gypsum Drywall screws shall be used while fixng corner brackets, stay, hinges, mullion caps of windows complete all as specified and directed. |
| 114 | Supply and fix for cement concrete tiles 30cm x 30cm x 20mm thick, machine pressed, set jointed and pointed in neat cement slurry in roofs, laid in CM (1:6) 15 mm thick and jointed flush in CM (1:3) mixed with 5% crude oil by weight of cement complete all as specified and directed. |
| 115 | Material and labour for chipping off existing loose damaged concrete from RCC members i.e RCC columns, beams, slabs, chajja etc on external and internal face for providing PMM (Polymer modified cementitious mortar). The following steps are to be followed :-(i) Dry Sub strate surface and free of debris and dust and applying rest removal on old reinforcement with epoxy primer.(ii) Applying epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible( if pin hole are still visible after a coat, a second coat shall be applied to ensure absence of pin holes).(iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) pre packed ready to use of n exc 50mm thickness.(iv) PMM surface to be moist cured for three days followed by air curing in temp as recommended by manufacture complete all as specified and directed |
| 116 | Supply only chicken mesh wire netting 25 gauge, 20mm mesh complete all as specified and directed |
| 117 | Supply and fixing for factory made mild steel door shutter with frame, fabricated from of 1 mm thick MS sheet including provision of steel handle & locking arrangement by providing 04 lever lock with duplicate keys (of make Godrej, Link or Harrison) & handle etc, (all as per Godrej pattern & detail shown on Drawing No. FD-1032 sheet 1/1 dt 25.9.93) including spray painting over a coat of red oxide primer and fixed the same on existing cupboard nitch with cement & sand mortar, complete all as specified and directed. Note:- For the purpose of measurement, only front area of cupboard shall be considered. |
| 118 | Demolition of Cement concrete (Unreinforced) of any description in ground floors and pavings n exe 15 cm thickness (below or above ground level) incuding removing debries from outside of the cantonment complete all as specified and directed. |
| 119 | Material and labour for PCC 1:3:6 type C-2 using 40 mm graded agg as in foundation filling and mass conc. complete all as specified and directed. |
| 120 | Material and labour for PCC 1:2:4 using 20 mm gaded crushed stone aggregate as in coping, benching /paving complete all as specified and directed. |
| 121 | Material and labour for colourd Machine pressed and vibrating moulded precast concrete interlocking paver block 80mm thick rubber moulded any shape and size over 25 mm thick sand layer conforming to IS 15658-2006 of 80 mm thickness grade M-40 with grey cement and pigments complete all as specified and directed. |
| 122 | Material and labour for PVC SWR Pipes of 110 mm bore dia single socketed in anhy length laid in floor or in trenches complete all as specified and directed. |
| 123 | SCHEDULE 'A' PART-II (E/M WORKS):Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, regulators, socket outlet, etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc. complete all as specified and directed. |
| 124 | Taking down ceiling fan any size or any type and deposited to concerned AGE E/M store yard complete all as specified and directed. |
| 125 | Taking down exhaust fan any size or any type and deposited to concerned AGE E/M store complete all as specified and directed. |
| 126 | Taking down old unserviceable/serviceable single or three phase electric meter and deposited to concrned Maintance AGE E/M store complete all as specified and directed. Please Enable Macros to View BoQ information |
| 127 | Taking down old unserviceable/serviceable single or three phase electric meter and deposited to concrned Maintance AGE E/M store complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender