Tender For Tender For Supply Of Equipment/Material, Design, Erection, Strengthening Of Existing 11 Kv Rakh Feeder (Dhulara Spur) And Strengthening Of Lt Lines Emanating From Various Sub-Stations On 11 Kv Rakh Feeder (Dhulara Spur) In (E) Section Mehl
Tender Value
8.11 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
8 days left
EMD
8114
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chamba → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Tender For Supply Of Equipment/Material, Design, Erection, Strengthening Of Existing 11 Kv Rakh Feeder (Dhulara Spur) And Strengthening Of Lt Lines Emanating From Various Sub-Stations On 11 Kv Rakh Feeder (Dhulara Spur) In (E) Section Mehla (U) Esd Hpsebl Dharwala Ed Chamba Op Circle Hpsebl Dalhousie
BOQ
| Sl. No. | Item Description |
| 1 | Strengthening of existing 11 kV Rakh feeder (Dhulara Spur)-Supply part |
| 2 | ACSR 61/3.35 sq. mm conductor equiv. to Rabbit 55 sq. mm |
| 3 | Steel Tubular Poles (9 m long) Workin load more than 200 Kg |
| 4 | Muffs (2000 mm) with concrete filling ( Available in Divisional Store) |
| 5 | AI Knee bracing set 2x(750x50x50)mm |
| 6 | MS Channel Iron C type: 100X50x6, Length: 1500 mm X-Arm |
| 7 | Discs insulator sets on Dead End structures (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps, Straight stapples & Bend Stapples etc.) x (3 No. conductors) x (2 No. sides) |
| 8 | 11 kV Pin Insulators (Porcelain, 12 kV, 10 kN): 3 No per double pole structure (Suitable for Heavily Polluted Creepage Distance-320mm) |
| 9 | M.S.C.I(100x50x6 mm), Length: 2800 mm X-arm |
| 10 | A.I Cross bracing set |
| 11 | Stay set complete in all respect (i/c Stay Clamp) (1No. / Single Pole , 4 No. / Double Pole Structures) |
| 12 | Stay Wire (7/3.15 mm) (9 kg Per Stay Set) |
| 13 | HT Earthing set complete |
| 14 | Single Continous Earth wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 3% (Sag, Earthing, Cross lacing above road wastage and for connecting with earth coil))} @ 0.102 kg/m |
| 15 | Eye Hook for earth wire |
| 16 | MS Angle Iron: 50x50x6, Length : 2800 mm for Road crossing |
| 17 | Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro' structure: 2 No ] |
| 18 | Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro' structure: 2 No |
| 19 | Danger Plate (250X200X1.6 mm |
| 20 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)] |
| 21 | Barbed Wire |
| 22 | Red Oxide |
| 23 | Aluminium Paint |
| 24 | X-Arm: [Channel Iron (75x40x6 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
| 25 | GO Switch Handle Supporting: [Channel Iron (75x40x4.8 mm), Length : 460 m |
| 26 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type |
| 27 | D.O Fuse Unit |
| 28 | Strengthening of existing 11 kV Rakh feeder (Dhulara Spur)-Erection part |
| 29 | ACSR 61/3.35 sq. mm conductor equiv. to Rabbit 55 sq. mm |
| 30 | Steel Tubular Poles (9 m long) Workin load more than 200 Kg |
| 31 | Muffs (2000 mm) with concrete filling |
| 32 | AI Knee bracing set 2x(750x50x50)mm |
| 33 | MS Channel Iron C type: 100X50x6, Length: 1500 mm X-Arm |
| 34 | Discs insulator sets on Dead End structures (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps, Straight stapples & Bend Stapples etc.) x (3 No. conductors) x (2 No. sides) |
| 35 | 11 kV Pin Insulators (Porcelain, 12 kV, 10 kN): 3 No per double pole structure (Suitable for Heavily Polluted Creepage Distance-320mm) |
| 36 | M.S.C.I(100x50x6 mm), Length: 2800 mm X-arm |
| 37 | A.I Cross bracing set |
| 38 | Stay set complete in all respect (i/c Stay Clamp) (1No. / Single Pole , 4 No. / Double Pole Structures) |
| 39 | Stay Wire (7/3.15 mm) (9 kg Per Stay Set) |
| 40 | HT Earthing set complete |
| 41 | Single Continous Earth wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 3% (Sag, Earthing, Cross lacing above road wastage and for connecting with earth coil))} @ 0.102 kg/m |
| 42 | Eye Hook for earth wire |
| 43 | MS Angle Iron: 50x50x6, Length : 2800 mm for Road crossing |
| 44 | Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro' structure: 2 No ] |
| 45 | Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro' structure: 2 No |
| 46 | Danger Plate (250X200X1.6 mm |
| 47 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)] |
| 48 | Barbed Wire |
| 49 | Red Oxide |
| 50 | Aluminium Paint |
| 51 | X-Arm: [Channel Iron (75x40x6 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
| 52 | GO Switch Handle Supporting: [Channel Iron (75x40x4.8 mm), Length : 460 m |
| 53 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type |
| 54 | D.O Fuse Unit |
| 55 | Transportation Charges ( Mechanical Transportation+Manual Carriage for average lead of 1 km) |
| 56 | Strengthening of LT line under various Substation on 11kV Dulara Spur-Supply Part |
| 57 | ACSR 6/1/4.72mm (100mm²) |
| 58 | Steel Tubular Poles (9m) |
| 59 | Muffs (2000 mm) with concrete filling ( Available in Divisional Store) |
| 60 | Channel Iron (75x40x4.8) [Length- 1.50 Mtr + 0.2 Mtr] |
| 61 | Shackle Insulator (16 kN) |
| 62 | D-Iron (U- Clamps) with nut and bolts |
| 63 | Earth Knob |
| 64 | LT Stay Set (i/c Stay clamp)& Egg insulator |
| 65 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
| 66 | Full Clamps ( 1 No for Stay Set) |
| 67 | Half Clamps |
| 68 | Earthing Set complete |
| 69 | Earth wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 3%} for 3%Sag, Wastage & Cross Lacing @ 0.102 kg/m |
| 70 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers) |
| 71 | Aluminium Paint |
| 72 | Red Oxide |
| 73 | Spiral PVC Spacer |
| 74 | Strengthening of LT line under various Substation on 11kV Dulara Spur-Erection Part |
| 75 | ACSR 6/1/4.72mm (100mm²) |
| 76 | Steel Tubular Poles (9m) |
| 77 | Muffs (2000 mm) with concrete filling ( Available in Divisional Store) |
| 78 | Channel Iron (75x40x4.8) [Length- 1.50 Mtr + 0.2 Mtr] |
| 79 | Shackle Insulator (16 kN) |
| 80 | D-Iron (U- Clamps) with nut and bolts |
| 81 | Earth Knob |
| 82 | LT Stay Set (i/c Stay clamp)& Egg insulator |
| 83 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
| 84 | Full Clamps ( 1 No for Stay Set) |
| 85 | Half Clamps |
| 86 | Earthing Set complete |
| 87 | Earth wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 3%} for 3%Sag, Wastage & Cross Lacing @ 0.102 kg/m |
| 88 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers) |
| 89 | Aluminium Paint |
| 90 | Red Oxide |
| 91 | Spiral PVC Spacer |
| 92 | Transportation Charges ( Mechanical Transportation+Manual Carriage for average lead of 1 km) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysAug 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender