Tender For Day To Day Maintenance Of Staff Quarters At Bsnl Compound Ctx And Akashpuri , In Prayagraj Ba.
Tender Value
2.55 Lakhs
Estimated cost
Bid Submission
06 Aug 2026
6 days left
EMD
5114
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Prayagraj → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Day To Day Maintenance Of Staff Quarters At Bsnl Compound Ctx And Akashpuri , In Prayagraj Ba.
BOQ
| Sl. No. | Item Description |
| 1 | PART -A: PLUMBING |
| 2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 3 | 15 mm nominal outer dia. Pipes. |
| 4 | 20 mm nominal outer dia. Pipes. |
| 5 | 25 mm nominal outer dia .Pipes. |
| 6 | 32 mm nominal outer dia. Pipes. |
| 7 | 50 mm nominal outer dia. Pipes. |
| 8 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 9 | 25 mm nominal bore |
| 10 | 20 mm nominal bore |
| 11 | 32 mm nominal bore. |
| 12 | 40 mm nominal bore |
| 13 | 50 mm nominal bore |
| 14 | 65 mm nominal bore |
| 15 | 80 mm nominal bore |
| 16 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 17 | 45 cm length |
| 18 | 15 mm nominal bore |
| 19 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : |
| 20 | 100 mm diameter |
| 21 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : |
| 22 | 15 mm nominal bore. |
| 23 | 20 mm nominal bore. |
| 24 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 25 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 26 | 15 mm nominal bore |
| 27 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : |
| 28 | 15mm nominal bore |
| 29 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. |
| 30 | 15 mm nominal dia |
| 31 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 32 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 33 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 34 | 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 35 | Providing and fixing PTMT pillar cock of approved quality and colour . |
| 36 | 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
| 37 | Providing and fixing PTMT grating of approved quality and colour. |
| 38 | Circular type. |
| 39 | 100 mm nominal dia. |
| 40 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. |
| 41 | 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. |
| 42 | 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. |
| 43 | PART-B: CARPENTARY SERVICES |
| 44 | Deduct for not providing hinges in doors, windows or clerestory window shutters with : |
| 45 | ISI marked Stainless steel butt hinges with stainless steel screws : |
| 46 | For 2nd class teak wood and other class of wood shutters |
| 47 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 48 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 49 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : |
| 50 | 20 mm dia (heavy type) |
| 51 | Providing and fixing ISI marked IS:1341 M.S. pressed butt hinges bright finished with necessary screws etc. complete : |
| 52 | 125x65x2.12 mm |
| 53 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) |
| 54 | 250x16 mm |
| 55 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) |
| 56 | 200x10 mm |
| 57 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) |
| 58 | 100 mm |
| 59 | Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete (Copper oxidised as per IS 1378) |
| 60 | 300 mm weighing not less than 330 grams |
| 61 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 62 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 63 | 200x10 mm |
| 64 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 65 | 100 mm |
| 66 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 67 | Twin rubber stopper |
| 68 | Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer-in-charge. |
| 69 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. |
| 70 | With stainless steel cover plate minimum 1.25 mm thickness. |
| 71 | PART-C : MASONRY SERVICES |
| 72 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 73 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 74 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but, excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 75 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 76 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 77 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 78 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 79 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 80 | 40 mm thick with 20 mm nominal size stone aggregate |
| 81 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. |
| 82 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 83 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In- Charge. |
| 84 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 85 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 86 | Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. |
| 87 | Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska : |
| 88 | With modular brick tiles |
| 89 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. |
| 90 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 91 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 92 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 93 | Two or more coats on new work. |
| 94 | White washing with lime to give an even shade : |
| 95 | Old work (one or more coats) . |
| 96 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 97 | Old work (one or more coats) |
| 98 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 99 | One or more coats on old work. |
| 100 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 101 | (i)Single socketed pipes. |
| 102 | 75 mm diameter |
| 103 | 110 mm diameter |
| 104 | PART -D : GENERAL SERVICES |
| 105 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared. |
| 106 | Providing manual assistance for attending petty day-to-day maintenance services related to Plumbing / Carpentary/ Masonary as & when required i/c all required T&P and scaffolding etc. (Note: Minimum time shall be reckoned as half day even if the time required for doing the job is less than half a day. |
| 107 | skilled manual assistance |
| 108 | un killed manual assistance |
| 109 | Removing blockage of floor trap, WC trap, RW pipe and sanitary pipes etc.including cleaning of pipes/ traps and disposal of garbage found to the nearest sewage dump etc complete. (Note: Rate includes the cost of necessary t&p, bamboo, rubber choke, etc.) |
| 110 | Cleaning of silt, saplings, fungi, dust from the roof top PVC/ RCC water tanks i/c its disposal outside compound, washing tanks with lime water and treating with potassium permanganate or bleaching powder etc. all complete as per direction of Engineer-in-charge. |
| 111 | Capacity of tank upto 500 litres. |
| 112 | Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- |
| 113 | (i) Tank shall be emptied of water by pumping & bottom shall be cleaned of slit and other deposits. |
| 114 | (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. |
| 115 | (iii) Chlorination of RCC internal surface by liquid chlorine. |
| 116 | (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. |
| 117 | (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge. |
| 118 | Cleaning of sewer line including manholes in the compound by complete removal of earth, silt, sludge, brick bats, garbages etc and disposing off the same outside the compound at the authorized municipal dump complete as per the direction of the Engineer-in-Charge. |
| 119 | Sewer manholes of all sizes and depth. |
| 120 | Cleaning of all roof top i/c mumty of staircase, khurra under side of water tank etc. by removing silt, algae etc. and disposal of mulba to an authorised municipal dump outside Teelcom compound as per direction of Engineer-in-charge. |
| 121 | T.E./Administrative buildings. |
| 122 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 123 | Uprooting & removal of wild growth of vegetation by spraying suitable herbicides like glyphosate products / or manually i/c repairing damaged wall surface if any , from terrace, walls, drainage system, water supply system or at any location of the building as directed by the Engineer-in-charge.(one wild growth shall be considered as one job) |
| 124 | Providing and fixing PVC cover of approved make having proper locking arrangement over PVC water storage tank of capacity 250 to 500 ltr. capacity. |
| 125 | P/F c.p. brass towell rail of approved quality Number i.c screws complete as directed (i) 600mm long. |
| 126 | Providing and fixing stainless steel jali (grating) with or without hole for waste pipe for floor/Nahani trap. |
| 127 | 100 mm dia. weight not less than 100 gms |
| 128 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 129 | Kitchen sink without drain board |
| 130 | 610x460 mm bowl depth 200 mm. |
| 131 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 132 | Orissa pattern W.C. pan of size 580x440 mm |
| 133 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 134 | 10 litre capacity - White |
| 135 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 136 | Black solid plastic seat with lid |
| 137 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
| 138 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
| 139 | Flat back wash basin of size 550x400 mm. |
| 140 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 141 | Flexible pipe |
| 142 | 32 mm dia |
| 143 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 144 | PART-E: CREDIT TO WORK |
| 145 | Credit to work the old unserviceable Brass/CP Brass Bib Cock, Stop cock, Pillar Cock Gate Valve and other fittings etc. |
| 146 | Credit to work old damaged PVC. sanitary/water supply fittings. |
| 147 | Credit to work old rusted (unserviceable) C.I./S.C.I. Pipes and fittings, Mild Steel/ Steel Sections, G.I./M.S. Pipes etc. |
| 148 | Credit to work SAP wood retrived from trimming of trees. |
| 149 | Credit to work old damaged wooden items. Credit to work old damaged wooden items. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender