Tender For Construction Of Compound Wall And Beautification Of Toshali Bhawan In Ward No. 34
Tender Value
29.65 Lakhs
Estimated cost
Bid Submission
11 Aug 2026
10 days left
EMD
29700
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Compound Wall And Beautification Of Toshali Bhawan In Ward No. 34
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning the existing B.T. surface with removal of foreign materials with brooms or soft brushes and finally dusting with old gunny bags and/or compressed air to receive bituminous coat. |
| 2 | Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.60 kg/m² using mechanical means as per Clause 502 of MoRTH Specification for Road & Bridge Works (4th Revision). |
| 3 | Providing and laying Bituminous Macadam with hot mix plant using crushed aggregates of specified grading premixed with bituminous binder @ 60/70 penetration grade of bitumen transported to site, laid over a previously prepared surface with a hydrostatic paver finisher with mechanical control to the required grade, level and alignment and rolled with smooth wheeled vibratory and tandem rollers to achieve desired compaction as per Clause 504 of MoRTH Specification for Road & Bridge Works. |
| 4 | Providing and laying Semi Dense Bituminous Concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transporting the hot mix to work site, laying with hydrostatic paver finisher with mechanical control to required grade, level and alignment and rolling with smooth wheeled vibratory and tandem rollers to achieve desired compaction as per Clause 508 of MoRTH Specification for Road & Bridge Works. |
| 5 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/sqm as per IRC specifications, excluding surface applied glass beads as per IRC:35. The finished surface shall be level, uniform and free from streaks and holes. |
| 6 | Earth work in hard soil or gravelly soil within 50 mtr. initial lead and 1.50 mtr. initial lift including rough dressing and levelling the bed. |
| 7 | Carriage of excavated earth by mechanical means within 5 km lead including loading and unloading with all cost convenient T & P sundries etc. complete as per direction of Engineer-in-Charge. |
| 8 | Supply and filling in foundation and plinth with river sand, in layers including watering, ramming, cost, conveyance, royalties and taxes of all materials, labour, carriage of water, sundries T & P etc. required for the work complete as per specification & direction of E-I-C. |
| 9 | PCC in prop. (1:4:8) in foundation and bed using 40 mm size H.G.C.B. metal of approved quality and approved quarry including hoisting, lowering, laying concrete and compacting the same to required level, with compaction, watering and curing including cost, conveyance, royalties and taxes of all materials with cost of all labours, sundries and T & P such as hire charges of concrete mixer, concrete vibrator required for the work etc. complete as per specification and direction of E-I-C. |
| 10 | Fly Ash Brick masonry in C.M. (1:6) in foundation & plinth and super structure having crushing strength not less than 75 kg/cm² with dimensional tolerance ±2%. |
| 11 | R.C.C. work of M25 grade with 20 mm down grade chips (C.B.) including centering & shuttering for RCC work only (Data for 15 cum). Column Base |
| 12 | Plinth Beam |
| 13 | Straightening, cutting, bending and binding, welding and jointing (if necessary) of TMT bars for R.C.C. reinforced work as per approved drawing including cost, conveyance, taxes of all materials, labour, T&P etc. required for the work complete. Weight of materials will not be considered in measurement for payment. |
| 14 | Fly ash brick masonry in C.M. (1:6) in foundation & plinth and superstructure using Fly Ash bricks 12 cm × 8 cm brick having crushing strength not less than 75 kg/cm². |
| 15 | Providing and laying factory made Cement Concrete Paver Blocks of required strength, thickness & size/shape made by table vibratory method, to attain superior smooth finish using PU or equivalent moulds, laid in required grade over prepared base. Finished with dry cement slurry and compacted properly. Includes cutting of paver blocks wherever required, finishing with fine sand, curing, sweeping etc. complete. |
| 16 | C.C. (1:2:4) using 12 mm size H.G. stone chips including cost of all materials, labour, T&P, sundries etc. complete as per specification and direction of Engineer-in-Charge. |
| 17 | 6 mm Thick C.P. (1:4) Finished Smooth |
| 18 | 12 mm thick cement plaster (1:6) over brick work including all cost, conveyance, royalty & taxes etc. complete to work site as per IS specification. |
| 19 | 16 mm thick cement plaster (1:6) over brick work including all cost, conveyance, royalty & taxes etc. complete to work site as per IS specification. |
| 20 | Fixing vitrified tiles (300 mm × 300 mm × 400 mm) in floors, treads of steps and landing over 25 mm bed of C.M. (1:1), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete including the cost of pre-cast tiles. |
| 21 | Fixing vitrified tiles (300 mm × 300 mm × 20 mm) in dados, skirting and risers of steps in C.M. (1:3), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete including cost of precast tiles. |
| 22 | Cement wash to plastered surface including all cost, conveyance, taxes etc. complete as per direction of Engineer-in-Charge. |
| 23 | Painting two coats with weather seal coat over a coat of water-bound wall primer including cost of all materials, labour, T&P, sundries etc. complete as per direction of Engineer-in-Charge. |
| 24 | Supplying, fitting & fixing of Stainless Steel (Grade 304) hand railing using 50 mm dia × 2 mm thick circular pipe with balustrade of size 32 mm × 32 mm × 2 mm (0.90 m C/C) and stainless steel pipe bracing of size 32 mm × 32 mm × 2 mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. complete including all materials, labour, T&P etc. required for the work. |
| 25 | Providing & laying at or near ground level factory made Kerb Stone of M-25 Grade Cement Concrete in position to the required line, level, curvature, jointed with cement mortar (1:3), including making joints with or without grooves (thickness of joints except at sharp curve shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per direction of Engineer-in-Charge. |
| 26 | Fixing of RCC Chair |
| 27 | Supply, Fixing and Fitting of Fountain with Light System |
| 28 | Plantation Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysAug 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender