Tender For Construction Of 2 Nos. Staff Quarters At Nawana Ashram School Under Jashipur Block
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Aug 2026
13 days left
EMD
40841
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mayurbhanj → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 2 Nos. Staff Quarters At Nawana Ashram School Under Jashipur Block
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches and column foundation and pits in hard soil/ gravelly soil and depositing materials with all leads, lifts and delifts including rough dressing the foundation bed as per specification including all cost of all labour, sundries, Tools & plants etc. complete as per the direction of Engineer-in-charge. |
| 2 | Filling in foundation and plinth with sand Watrering and ramming etc., complete including cost, conveyance, royality and all labour with T&P required for the work etc., complete in all respect as per the direction of Engineer-in-charge . |
| 3 | Cement Concrete (1:4:8) in foundation and plinth using 4cm (11/2”) size clean hard black broken granite metal of approved quality and from approved quarry free from weathered skin surface and other deletorious materials with sharp sand of approved quality and grading including hoisting lowering and laying concrete in layers not exceeding 15cm (6\\") thick to the required level ramming, watering and curing etc., complete with all cost and conveyance of all materials with all taxes and royalties with all labour and T&P required for the work etc., complete in all respect as per the direction of Engineer-in-charge. |
| 4 | Brick work with Fly Ash Bricks 25cm x 12cm x 8cm size having crushing strengtth not less than 75Kg/ Cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in Foundation & Plinth to the required level watering and curing etc., complete including cost and conveyance of all materials all taxes and royalities and all labour with T&P required for the work etc., complete in all respect as per the direction of Engineer-in-charge.- Ground Floor |
| 5 | Brick work with Fly Ash Bricks 25cm x 12cm x 8cm size having crushing strengtth not less than 75Kg/ Cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in superstructure to the required level watering and curing etc., complete including cost and conveyance of all materials all taxes and royalities and all labour with T&P required for the work etc., complete in all respect as per the direction of Engineer-in-charge.- |
| 6 | RCC Work M-20 grade with 20mm and down grade black hard granite (crusherbroken) stone chips approved quality and from approved quarry free fg in appropriate propertion, lowering, laying & compacting to proper level curing etc., complete as per direction of Engineer-in-charge.- (a) Col Base & Plinth Bend |
| 7 | (b) RCC-M-20 Lintel |
| 8 | (C) RCC-M-20 Col & Room Beam |
| 9 | (C) RCC-M-20 Chajja |
| 10 | (D) RCC-M-20 Roof Slab |
| 11 | (E) Stair Case |
| 12 | Providing HYSD bar reinforcement for R.C.C. work including Straightening, cutting, bending, binding, welding, tying the grills, laying and placing in proper position as per approved design and drawing including cost, conveyance of 18 to 20 gauge binding wire cost and conveyance of HYSD bars complete in all respect as per specification for road & Bridge and direction of Eng - in Charge.- Ground Floor |
| 13 | Cement Concrete (1:2:4) with 12mm size hard granite chips etc complete. |
| 14 | Supplying, fitting and fixing vitrified tile in floors of size 600mm x 600mm of approved make conforming to IS: 13755 laid to 20mm thick cement mortar(1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer-in-Charge. ( For New work Only) |
| 15 | Fixing vertified tiles in dados, (600mm x 600mm) skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. |
| 16 | Fixing tiles in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile etc required for the work all complete as per direction of Engineer-in-Charge. |
| 17 | Fixing glazzed tiles in dados,skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. |
| 18 | 16mm (5/8\\") thick cement plaster (1:6) in finished smooth to inside rough surface of 10\\" thick brick walls after racking out the joints including watering and curing with cost, conveyance, royalty, all tax of all materials and cost of all labour with T&P required for the work etc. complete. as per the direction of Engineer-in-charge-Ground Floor |
| 19 | 12mm (1/2\\") thick cement plaster (1:6) finished smooth to outside/inside surface of metal concrete walls after racking out joints including watering and curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalties etc., complete in all respect in all floors as per the direction of Engineer in charge- Ground Floor |
| 20 | 12mm thick cement plaster (1:4) over brick work including cement punning for skirtings including watering and curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalties etc., complete in all respect in all floors as per the direction of Engineer in charge- Head Room |
| 21 | Supplying , fitting and fixing in position steel cutting edge as per approved design using GI anglesm bolts, and nuts complete incluidng cutting angels to required size bending to shape, drilling holes and reverting and welding etc. complete in all respect as per the direction of Engineer in Charges. -Ground Floor |
| 22 | Providing supplying fitting and fixing of Blue scope colour G.I. Sheet including etc.complete |
| 23 | MS Truss & Frame (Material Cost only) MS Rectangular Hellow Section 60mmx40mmx 4.50 mm |
| 24 | Painting two coats in all floors (Two coats with paints of approved shade and base coat with primer) to new wood and iron work including sand papering,polishing the surface,including cost conveyance royalties and all taxes of all materials alongwith T&P required for the work including cost of paints and primer complete in all respect as per the direction of Engineer in Charge. |
| 25 | Provision for fitting and fixing and cost of Ventilators etc. complete- Ventilator2 |
| 26 | Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect. |
| 27 | Distempering 2 coats to walls with any approved shed incluidng cost of priming one coat with water bound cement primer with cost of all materials labour etc. complete as per the direction of Engineer in Charge - First Floor |
| 28 | Wall painting two coats with weataher coat paint of approved shade including cost of paint.with one coat of primer |
| 29 | Recssed wiring to light point/fan point/Exhaust fan point / Call bell point with 1.5 Sqmm FR PVC Insulated single core multistrand copper conductor of ISI marked with 20mm dia nonpn metalic PVC flexible conduit with 5A 250V piano tye switch ISI marked and celling Roseis ISI mark mounted on MS BOX having front backlight cover of suitable size , MS box with 1.0sqmm FR PVC insulated single core mulstistrand copper conductor as earth wire icnlduing all accessories and connection (Make of wire Finolex/L&T/ Anchor/ Havells/V-Guard/HPL)- light Point Group A |
| 30 | -do- light point Group-A |
| 31 | -do- light point Group-C |
| 32 | Supply and fixing of 6 Amp plug with switch on existing board (Piano type/cover including comnnection etc. as requried ) |
| 33 | Point wiring for 5 /6 amp socket outlet with 2x 1.5 sq.mm FR PVC insulated single core multistandard copper conductor of ISI marked in recess 20mm dia non-metalic PVC flexible conduit with Piano type switch , Phenolic lmainated sheet suitable size ISI marked MS Box and earthing point with 1x 1.5 sq.mm FR PVC insulated single core multistandard copper conductor for looop earthing etc. as requried ( Make of wire Finolex / L & T / anchor / Havels / V guard( |
| 34 | Point wiring for 5 /6 amp socket outlet with 2x 2.5 sq.mm FR PVC insulated single core multistandard copper conductor of ISI marked in recess 20mm dia non-metalic PVC flexible conduit with Piano type switch , Phenolic lmainated sheet suitable size ISI marked MS Box and earthing point with 1x 1.5 sq.mm FR PVC insulated single core multistandard copper conductor for looop earthing etc. as requried ( Make of wire Finolex / L & T / anchor / Havels / V guard( |
| 35 | Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metalic heavy duty flexible conduit 1.6mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required. (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/HPL) -A-2x2.5 sqmm +1x1.5 sqmm 20 mm dia |
| 36 | Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metalic heavy duty flexible conduit 1.6mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required. (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/HPL) B-2x4 sq mm +1x1.5 sqmm20mm dia |
| 37 | Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metalic heavy duty flexible conduit 1.6mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required. (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/HPL)2x4 sq.mm +1x1.5 sq.nn in 20m mdia |
| 38 | 32AMP ICDP Main swithc with MS Board size 200x 125x60mm deep in recesss including wall cutting and making good the same with writing complete in all respect. |
| 39 | Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250 V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate , inter connections , phosphatized and poweder painted inluding earthing etc. as required ( but without MCB/RCCB/Isolator ) make -HPL/Havells / V-guard /HPL) - 4 Way Double Door |
| 40 | Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250 V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate , inter connections , phosphatized and poweder painted inluding earthing etc. as required ( but without MCB/RCCB/Isolator ) make -HPL/Havells / V-guard /HPLSP MCB 6-32A- C Seried - SP MCB 6-32A C Serie |
| 41 | 5 AMP Switch |
| 42 | 5 AMP Socket |
| 43 | 15 AMP Socket |
| 44 | 15 AMP Swich |
| 45 | A B holder |
| 46 | Ceililing rose |
| 47 | Supply and fixing of 300mm Exhaust Fan, Motor speet 1400 RPM Metal Blade , Double ball bearings heavy duty motor metal bird guard, Air delivery (minimum) 1850m2/h, Noise level 40-45db |
| 48 | Supply and fixing of AC Ceiling Fan 48`` size, Minimum Air delivery -210 cum/ min/ 3450rpm / BEE 5 star ated (make- Havells ES 50/Crompton HS Plus) |
| 49 | Supply and fixing of 18 watt Led batten polycarbonyte body tube light , Luminioulsy 100 lumens colour Temprature 6500 Kelven (Make Havells/ Philips / Crompton / HPL) |
| 50 | Supply and fixing of 9 watt Led Bulb (Make Havells/ Philips / Crompton / HPL) |
| 51 | Supply and fixing of 25watt led streetlight Endura citylite platinum energy saving and environmental friendly long lige LED street light made up of pressure die cast allumimium housing with acrylic cover as diffuser with IP66 Protection and impact resistance of IK07 |
| 52 | supply and fixing of 2x4 mm Sq Aluminioum unbonded wire with GI support |
| 53 | Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. (excluding cost of Earth Work in trenches) -(i) 20mm dia PVC Pipe |
| 54 | Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. (excluding cost of Earth Work in trenches) -(i) 25mm dia PVC Pipe |
| 55 | Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. (excluding cost of Earth Work in trenches) -(i) 32mm dia PVC Pipe |
| 56 | Supplying and Fixing of Brass Screw-down Bib Cocks (Taps) polished bright conforming to IS:781-1995 of the following nominal sizes as per specification complete. |
| 57 | Supplying and Fixing of Brass or Gun Metal Full Way Valve conforming to IS:781-1995 of the following nominal sizes with wheel as per specification complete.-25mm Get Valve |
| 58 | Supplying and Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge- 1000 Ltr PVC Water Tank |
| 59 | Supplying all materials, labour with T&P for Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556 : Part 3-2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification (excluding cost of Earth Work in trenches) (vide Item No.3.4.1, Page.147 of PH Analysis of Rate, 2013) |
| 60 | Providing and fixing controlled flush, low level cistern [10 litre (full flush) capacity-coloured] made of vitreous china conforming to IS 774-2004 with all fittings complete |
| 61 | Supplying and Fixing wash basins with hole for pillar taps conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification. |
| 62 | Cutting holes through the brick or laterite masonry wall for taking Sand Cast Iron (SCI) /centrifugally cast (spun) iron pipes and mending good the damages. |
| 63 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) 90 Mtr Pipe |
| 64 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes -110mm Pipe |
| 65 | Fixing ' P ' or ' S ' trap ( with horn or without horn ) for water closet squating pan including jointing the trap with pan incement mortar (1: 1 )as per specification. |
| 66 | S/F of Towel Ring |
| 67 | S/F of Soap Dish /Pval |
| 68 | S/F of Corner Shelf |
| 69 | S/F of Bath Room Mirror |
| 70 | S/F of Towel Rack |
| 71 | S/F of Proceling counter Top Basin Oval Shape (550x430) |
| 72 | S/F of 110mm dia PVC SWR Plain Bend |
| 73 | S/F of 90mm dia PVC SWR Plain Bend |
| 74 | 90x90x90mm dia PVC SWR Tee |
| 75 | 110x110x110mm dia PVC SWR Tee |
| 76 | 110x110x110mm dia PVC SWR Tee |
| 77 | S/F of 110mm dia PVC SWR Coupler |
| 78 | S/F of 90mm dia PVC SWR Coupler |
| 79 | Providing and laying in trenches P.V.C pipe Sch-80 of the following nominal bore and tube fittings including Earth work testing as per specification complete-25mm Dia |
| 80 | Construction of Display Board at site of proper specification as fixed by Department as per the direction of the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender