Tender For Supply And Installation Of Hot And Cold Pump Along With Filteration Unit In New Hockey Change Room Jacuzzi At Sai,Nssc,Bangalore.
Tender Value
26.97 Lakhs
Estimated cost
Bid Submission
12 Aug 2026
11 days left
EMD
54000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply And Installation Of Hot And Cold Pump Along With Filteration Unit In New Hockey Change Room Jacuzzi At Sai,Nssc,Bangalore.
BOQ
| Sl. No. | Item Description |
| 1 | Civil and Electrical |
| 2 | Supply ,Installation ,Fixing and Commissioning of Air Source Heat Pump Water Heater Cooling ( 5° C ) Spaar Defrost Air Source Heat Pump Water Heater(SHT-9-AHA) 18KW with aluminum hydrophilic fin tube, Titanium coil heat exchanger along with automatic control panel & In-built Circulation Pump |
| 3 | Air Source Heat Pump Water HeaterTransportation, Erection and Commissioning charges |
| 4 | Supply ,Installation ,Fixing and Commissioning of Air Source Heat Pump Water Heater (Heating 40° C ) Spaar Defrost Air Source Heat Pump Water Heater(SHT-9-BEA) 25KW with aluminum hydrophilic fin tube, Titanium coil heat exchanger along with automatic control panel & In-built Circulation Pump |
| 5 | Air Source Heat Pump Water HeaterTransportation, Erection and Commissioning charges |
| 6 | PRESSURE SAND FILTER :Providing complete erection, testing and commissioning of the pool filteration equipments hot and cold spa and equipment, including coordination with civil works, necessary supervision, and initial operation and maintenance services, complete as directed by the Engineer-in-Charge.1.Pool Filtration Equipments.2.Pool Re Circulating lines.3.Pool accessories FILTER - MEDIA SILEX SAND : supply and fixing of reinforced polyester resin and glass fiber pressure sand filter with pressure gauge, manual air bleeder, water drain and emptying plug fitted with collected arms and diffuser. maximum working pressure : 2 kg/cm2. Diameter : 700 mm with top mount multi port valve 6 ways make : mambe |
| 7 | FILTER - MEDIA SILEX SAND supply and filling of multi - graded bed of gravel 5mm and filter sand 1mm |
| 8 | SKIMMER: supply and fixing of wide mouth skimmer, ABS plastic, strainer basket top deck cover |
| 9 | POOL DRAIN:supply and fixing of ABS plastic main drain 9\\" grill top plate |
| 10 | FLOOR INLET :supply and fixing of floor inlet fitting in ABS,2\\" connection Floor/Wall mounted ABS Plastic with Eyeball Inlet or screw adjust |
| 11 | SUCTION INLET VACUUM POINT supply and fixing vacuum point in white ABS 2\\" connection wall mounted |
| 12 | RE- CIRCULATATING PUMPS Supply and fixing of high hydraulic efficiency monoblock pump set built with prefilter 1 HP 1 phase pump with fittings & necessary bolts. Make : mambe |
| 13 | PUMP STARTER supply and installation of pump starter DOL starter with cable conduit (L & T) |
| 14 | SWIMMING POOL PLUMBING :supply and fixing of swimming pool plumbing with PVC pipe of 10 kg /cm2 of63mm with all PVC fittings 16kg/cm2. plumbing includes inlet, outlet, drain and skimmer for distance of the filter room. Make:prince/finolex/supremesupply and installation of Controlling ball valves & non return valves with all necessary fittings make: harit |
| 15 | SWIMMING UNDER WATER LIGHTS AND DRIVERS supply and fixing of swimming pool under water lights mounted on the side wall of the swimming pools with 12volts x 12 watts |
| 16 | CABLE AND CONDUIT FOR UNDER WATER LIGHTS supply and fixing of cable and conduit of 2.5sqmm 2 core ISI mark for lighting from pool to filter room |
| 17 | TRANSFORMER FOR UNDER WATER LIGHTS supply and fixing of transformer in filter room |
| 18 | POOL CLEANING EQUIPMENTS plastic vacuum head floating vacuum hose 11 m plastic wall brush 18\\"plastic deep net telescopic aluminum handle- 2NX2M |
| 19 | TOTAL SPA SYSTEM - 10 seater hot and 10 seater cold 3 jets for one person--- 1 jet to back and 2 jets to legs. total 30 jets.length is 14.25 ft and width is 8.25 ft POOL ACCESSORIES:SPA JETS & CONTROLS Supplying and fixing of 2\\" Jacuzzi jet -4.5 m3, 50mm water & 32mm air connections, Hydro air Volume Controller 1\\", Air Switch - Bottom make :Emaux/mambe/equivalent |
| 20 | SPA PUMP:Supply and fixing of high hydraulic efficiency monoblock pump set 5 HP - 3 phase pump with necessary foundation bolts. Make : Kirloskar/ lubi equivalent |
| 21 | SPA PLUMBING:supply and fixing of swimming pool plumbing with PVC pipe of 10 kgf 50mm,63mm,75mm,90mm. with all PVC fittings 16kg/cm2. plumbing includes inlet, oulet,drain and Controls valves from pool to the filter room. Make: supreme, harit |
| 22 | SPA PUMP STARTER:supply and installation of pump starter with cable conduit (L & T) |
| 23 | Supply, installation, testing and commissioning of a manually operated Water Softener Plant having a service flow rate of 2,000 LPH. The unit shall be complete with FRP pressure vessel, top and bottom strainers, cation exchange resin (220NA grade), regeneration arrangement, internal distributor system, brine tank, brine line, valves, piping connections and all accessories required for efficient removal of hardness from raw water. Technical Specifications: • Capacity: 2,000 LPH • Resin Type: Cation 220NA Ion Exchange Resin • Vessel MOC: FRP • Vessel Size: 1054 • Resin Volume: 50 Litres • Multiport Valve Size: 25 NB • Inlet/Outlet Pipe Size: 25 NB • Mode of Operation: Manual • Scope: Complete with one initial charge of resin, regeneration system, top & bottom strainers, fittings, gauges and accessories for ready-to-use |
| 24 | Installation Charges Providing all skilled labour, tools, tackles, consumables and supervision for unloading, positioning, alignment, installation, testing and commissioning of the softener plant including functional performance testing. |
| 25 | Plumbing works Supply and installation of all interconnecting GI/UPVC/SS piping, fittings, unions, valves, supports, clamps and accessories between raw water inlet, soft water outlet and drain connections, including leak testing and commissioning. |
| 26 | Providing and carrying out RCC/PCC concrete works surface preparation, cement plastering, waterproofing treatment, curing, and all allied civil works for the Jacuzzi floor, walls, steps, benches, and base, including formwork, finishing, making good damaged portions, disposal of debris, and complete execution in all respects as per approved drawings, specifications, and directions of the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender