Tender For Special Repairs Of Roof, False Ceiling And Floor Tiling Of Bk No. T-1 (Or Living Accn) Approx Plinth Area 75 Mtr Length X 10 Mtr Width Under Ge (South) Secunderabd.
Tender Value
48.06 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
15 days left
EMD
96200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs Of Roof, False Ceiling And Floor Tiling Of Bk No. T-1 (Or Living Accn) Approx Plinth Area 75 Mtr Length X 10 Mtr Width Under Ge (South) Secunderabd.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons, riser of steps, skirting, dado etc laidbedded and pointed in any mortar complete all as specified and directed. |
| 2 | Demolition of cement concrete un-reinforced paving not exc 15cm thick above or below ground level complete all as specified and as directed. |
| 3 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement 20mm screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 4 | M&L for machine cut kota stone slab 20-25mm thick in riser of steps, skirting,dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl 10mm thick rendering in CM (1:3) backing of wall tiles such as dado/skirting in vertical surface complete all as specified and directed. |
| 5 | M & L for PCC 1:2:4 type B0 (using 12.5mm graded crushed stone aggregate) 50mm thick as in levelling course, sub-floors and paving etc complete all as specified and directed. |
| 6 | M&L for 16 to 18mm thick granite stone (of any type ) work (table rubbed and polished) in floors, staircase tread & risers of steps, cooking platform, window cill/jambs etc laid bedded over 15mm thick CM (1:4) bedding & pointed in white/coloured cement to match coloured tiles including grinding and mirror polishing complete all as specified and directed. (Note : Colour of granite shall be as approved by GE) |
| 7 | Rounding ( chamfering) to edge of marble/granite slab edge with mirror polishing such complete all as specified and directed. |
| 8 | Taking down chowkats or frames with shutters n exc 1.5 sqm each of any description and making good the same damage portion (without taking off shutters from the frame) complete all as specified and directed. |
| 9 | S & F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 10 | M & L for preparing old painted wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 11 | S&F 20mm dia Harrison rails (Curtain rod), mild steel, chromium plated with fixing brackets and fancy type knob, stops, rollers etc complete all as specified and as directed . |
| 12 | S&F floor door stopper of aluminium alloy body & tongue, anodised with hard drawn spring of 140mm size fixed in floor complete all as specified and directed |
| 13 | S&F for mild steel holdfast, bands, straps, bracket/ clamp for eves gutter, valley gutter and similar conforming to Fe-290 Gde-E-165 complete all as specified and as directed. |
| 14 | S & F powder coated anodised aluminium frame,three track sliding for windows, fixed/top hung frame for ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 15 | S & F powder coated anodised aluminium sliding/openable window shutter and top hung ventilator shutters with sash bars aluminium sections weighing 0.55kg/m including necessary joining cleats, glazing clips rubber packing ,locking arrengement complete all as specified and directed.(Note: Glass panes and wire mesh shall be measured and paid seprately ) |
| 16 | Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to e.290.Gde-E-165.complete all as specified and directed. |
| 17 | S & F for 4.0 mm thick sheet glass, ordinary quality and glazing in aluminium door frames with beading not exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 18 | Dismantling plain or corrugated steel sheeting any gauge, thickness including similar pattern roof coverings.complete all as specified and directed. |
| 19 | S&F for pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa (AZ-150) as in roof covering fixed with self tapping screws complete all as specified and directed. |
| 20 | S&F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strengh of 550 mpa as on roof covering/ridges fixed with self tapping screws complete all as specified and directed. |
| 21 | Dismantling of structural steel work complete all as specified and directed. |
| 22 | Dismantling of wall and ceiling boards (fibre pulp insulation etc) or insulation boards / slabs /blankets any thickness, including cover fillets complete all as specified and as directed. |
| 23 | S&F for anodoised aluminium powder coated snap grid frame work for ceiling 605mm x 605mm using aluminium anodoised sections specified in SSR part-I 1991 including cutting, drilling jointing ect complrtr including 4mm dia of GI hangers wire suspenders fixed with adjustable connectors and providing 6mm thick E-boards (Classic) 605mm x 605mm size complete all as specified and directed. |
| 24 | M&L for rolled section as in main and cross beam, hip and jack rafter,purline where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates of grade Fe-410 (grde E-165).complete all as specified and directed. |
| 25 | M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying 2 coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 26 | M&L for preparation of old steel surfaces over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint over one coat of red oxide primer acomplete all as specified and directed. |
| 27 | Demolition of Precast cement concrete block walling built in CM or Cement lime Mortar complete all as specified and as directed. |
| 28 | M&L for precast cement concrete block masonry exc. 10 cm width with solid block C1 (1:3:6) (using 20 mm graded crushed stone aggregate) and setting in cement mortar (1:6) complete all as specified and directed.. |
| 29 | M&L for 75mm thick PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in plinth protection finished even and smooth with using extra cement including forming 6mm wide joints at n,exc 2.0 sqm area and filling with mastic comprising one part of heated bitumen 85/25 grade and three parts of sand complete all as specified. |
| 30 | M&L for PCC (1:4:8) type D2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 31 | M&L for broken stone or boulders hard core of gauge n.exc. 63 mm deposited, spread and levelled in layers of not exc.15 cm thick, watered and rolled rammed to a true surface.complete all as specified and directed. |
| 32 | M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in 75mm thick as in sub base complete all as specified and directed. |
| 33 | S&F for glossy finished heavy duty chequered cement concrete tiles 30cmx30cmx25mm thick set jointed with grey cement and pigment and pointed in neat cement slurry including 20 mm thick screed bed of CM(1:6) in floors.complete all as specified and directed. |
| 34 | Taking down cement plaster on brick /stone masonry / concrete surfaces of wall / ceiling incl raking out joints, hacking for key, scrubbing down with water etc and deposited the debris outside the MD land complete all as specified and directed. |
| 35 | M&L for rendering in two layer i.e.5mm thick in CM 1:4 including with or without mixing water proofing compound over 10mm thick in CM (1:6) on concrete/block masonry surfaces and finished even and smooth without using extra cement on complete all as specified and directed.(Note WPC shall be measured and paid separately) |
| 36 | M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) complete all as specified and directed. |
| 37 | M&L for preparation of newly plastered wall surfaces with 3mm average thick wall care putty and applying two coat of oil bound distemper over one coat of primer including leveling the surface which undulation found with cement putty etc complete all as specified and directed. |
| 38 | M&L for preparation on newly plastered external wall surface and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint complete all as specified and as directed. |
| 39 | M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded crushed stone aggregate) as in cooping & gap filling in roof complete all as specified and as directed |
| 40 | M&L for complete removal of existing treatment on wall by scrapping, washing, cleaning etc with 3mm average thick wall care putty and applying two coat of oil emulsion distemper over one coat primer including filling of cracks, holes and including leveling the surface which undulation found with wall care putty etc.complete all as specified and directed. |
| 41 | M&L for complete removal of existing treatment of old decorated external wall surface by scrapping, washing, cleaning etc and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint incl filling cracks, holes using wall care putty complete all as specified and as directed. |
| 42 | M & L for taking down copper/aluminium point wiring (light, fan, socket, power, security lights or bulkhead) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed. Please Enable Macros to View BoQ information |
| 43 | M & L for taking down copper/aluminium point wiring (light, fan, socket, power, security lights or bulkhead) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender